Building a Skid Steer Quick Attach for my tractor

[@VinyB57]

For Standard SSQA PLANS and DXF files: 57design.ca/products/skid-steer-quick-attach-receiver-plans-dxf-files-ssqa

[@arvidol]

Hey @VinyB57! Nice conversion, interested in making a similar electric power steering retrofitting on my old IH B414 - what is your experience so far with the build one year later?

[@DatBoiOrly]

now you've got the quick attachment you need to make some forks for it

[@VinyB57]

Yes....but after the backhoe...I need the backhoe ASAP

[@jmsq92]

I've never had the need to own or modify a tractor or even design a back hoe or any attachment... but you bet im gonna watche every episode as soon as i get the notification!

[@VinyB57]

Glad you will follow that journey! 🤙

[@09alvaha]

This channel deserves much more attention. Great content. Entertaining. AvE quality

[@VinyB57]

Hey thanks, big fan of AvE too

[@andyb7754]

Excellent build, or re-build (however you want to look at it). Keep them coming please.

[@VinyB57]

Hey thanks!

[@powerman1955]

This is soo awesome! Watching you work absolutely fascinates me! I love that you incorporated your logo in the bucket sides, but of course, you are a genius after all!

[@VinyB57]

No genius here 😅and yep I try to put that logo and the ''big enough'' project that I built....I shoud do something about the ''unlogoed'' the smart-busa..🤔

[@okinanutoria5254]

L'oublie de la "traduction automatique" m'a bien fait rire xD Continue comme ça!

[@VinyB57]

Merci ! 👍

[@FabricateEveryDay]

At 4:43 I'm glad that you marked the part to be removed after cutting, with an X. It very much clarified the procedure.

[@hothotllywood4192]

C'est vraiment un super boulot ! Par contre si tu avais peint ton godet en rouge, tu aurais pu charger deux fois plus vite. Quand j'ai peint mon small block en rouge, j'ai senti que les accélérations étaient bien meilleures.

[@VinyB57]

Donc, s'que tu dis, c'est que mon Massey va aller plus vite qu'un John Deere...🤔😅

[@4110mahindra]

Great reuse/modifications of the bucket. Nice job.

[@tpurves2006]

Staring the same project on my MF231 and MF232 loader. Impressive and you earned a sub. Love the little innuendo’s buried within. 😂

[@VinyB57]

Thnak you sir! 👍

[@threeriversforge1997]

Great build, and something I hope to take on just as soon as I get my little shop cleaned up and more organized. Thanks for the inspiration!

[@_andrey___]

Thank god I discovered this channel

[@Random_guy_2024]

From racing car to farming tractor to excavator, I love it

[@VinyB57]

😅...yeah...and let me tell you that the algorithm doesn't know what to do with this content...unfortunately 😕

[@prabhuorion9202]

Backhoe and loader on a mini tractor is gonna epic video

[@VinyB57]

Hey thanks man! 🤙

[@adman6380]

Great work as always

[@VinyB57]

Thanks again!

[@grant2k]

When I built mine I welded a receiver where you mounted your ball. Adds another level of versatility.

[@VinyB57]

I though about it, but I wasn't planning on putting a bike rack later on 😅 So I went only with the ball....But it's nice having a welder, adding a receiver, if I eventualy need one, is fairly easy 😉

[@grant2k]

@@VinyB57 it just makes it very easy to switch ball sizes for moving different trailers. A bike rack is a good idea though.

[@KnownSender1]

Great video man 💯 👍

[@VinyB57]

Glad you enjoyed

[@MiniLuv-1984]

Wow you have energy and talent. Very nice, smart work.

[@VinyB57]

Thank you very much

[@keithviolette5870]

Looks like a huge improvement Viny! Looking forward to seeing the backhoe build you have planned.

[@VinyB57]

I shoud get parts this week...😁

[@imperfectfarm3436]

I was thinking about building a quick loader for my 1978 Case 380LL. Jealous of the multiple machines you have, might need to outsource my build. Brilliant work by the way.

[@Deckzwabber]

Excellent job

[@VinyB57]

Thank you! Cheers!

[@AustinCoulson]

Another awesome video. So much work on the computer to plan this out. I would have looked for a SSQA on a damaged piece of equipment and tried to retrofit it, but that's because I lack your cad skills. Looking forward to see what other attachments you end up adding to this mini beast

[@VinyB57]

hey thanks bro, always appreciate your support!

[@chaunster]

Great work man

[@VinyB57]

Appreciate it!

[@coltonkruse2313]

Great build

[@VinyB57]

Thanks mate!

[@pymracing]

Good job Viny !

[@VinyB57]

Thanks man!

[@gui96]

Beau projet sa Vincent

[@VinyB57]

Hey merci ti gui!!

[@VinyB57]

Chus encore a travailler sur un tracteur 😅🤦‍♂️

[@themagiccoasterlover]

Great build man. Love it!

[@tonyestvik7969]

Yoooo Viny! You said a couple of videos a go- I will never reuse old steel again.......but the wife are happier now, yes?? Do you have a france canal too.... Yes, the bucket- you really can use now, before you could plow snow and maybe lift 10 kilos of gravel 2 kilos more than a shovel...... Good job, and take care!

[@VinyB57]

Hi Tony, no ''France canal'' and thanks for the comment!

[@bleuethud3406]

Salut Viny, j'adore la facon dont tu explique avec juste assez d'humour, mais pas trop, en tout cas, bravo , tu travaille bien. Continu, new subscriber here !! :)

[@doktorschnuggles672]

Good Work 😊

[@VinyB57]

Thanks 😄

[@MonroeWorker-q6x]

Great job

[@Sierraman59]

C'est de l'art 👍🙂

[@VinyB57]

Merci!

[@maxpat82]

Nice! pour tilter: il tilt maintenant. est-ce qu'il dump vertical? ..mon petit BX ne tilt pas tant que ca. et c'est pas un probleme. la boule de trailer est un must.. mais encore mieux aurais été un receiver 2" ;) Next: un set de fourche a palette ..tres utile pour deplacer plein d'affaire(pas juste des palette).

[@VinyB57]

Hey max, yes le set de fourche est dans les plans, tellement que j'ai déjà acheter les fourches, il ne me reste plus qu'à faire le support quick attach, mais je manque de temps....Mais, il va y avoir un video sur cet upgrade... éventuellement 😅

[@hollandduck79]

Hello from the Netherlands. thanks for the video Viny . Sincerely Hollandduck

[@VinyB57]

My pleasure!

[@joblo24]

lache pas Mec !! tres beau travail !! ...oops auto translate on ahahaha

[@VinyB57]

Hey merci! 👍

[@runsolo7418]

Another great video

[@VinyB57]

Thanks again!

[@josephderusso1678]

Amazing work as always!! Damn kids and there graffiti !! 😂👍👍

[@VinyB57]

I know right! Kids these days 😅

[@Dm65-gpy]

Great build , what did you draw the plans in and what program does your plasma table use? Would you consider sharing your drawings?

[@ukaszkazimierczak16]

Great job, nice channel. Could you share your DWG drawings?

[@deansheldon6333]

Awesome job! Where did you get the plans or dimensions for the build? Can you share?

[@VinyB57]

I designed it, I could share it, but it s not a standard ssqa, so I don t recommand using this

[@francisgravel6593]

T'est une vraie machine! Question comme ça: Quel modèle ton imprimante 3D?

[@VinyB57]

Ah, c'est une vieille Anet A8 que j'ai ''pimpée'' est pas terrible comme machine 🤷‍♂️

[@TheTrooper777]

Awesome

[@VinyB57]

Thanks

[@bartouleterrible]

Really nice content ! I just suscribe and think gonna love your channel. Félicitations d’un français de la région parisienne ! I have also desactivated google automatic translation 😜

[@VinyB57]

Ah bonne idée! (pour la désactivation 😉) Bienvenu dans mes folies! 😁

[@FromSteelToWood]

Well done sir! J'ai fait un projet similaire pour mon vieux Case 430! C'est vraiment essentiel un SSQA! Merci!

[@ericsebina256]

Nice! Smooos work😅

[@VinyB57]

Thanks 😁

[@brock2306]

I also have an old Massey Ferguson tractor with a loader front end. Do you by chance have plans available for the SSQA that you built?

[@VinyB57]

I should have the plans available soon, it aint a universal SSQA though...but it should be a good start if you want to make yours universal, I let you know!

[@PyroTechitten]

My back hurts just watching this video. :P

[@francoisviau7101]

Pourquoi vous n’offrez pas les plans pour cette item?

[@VinyB57]

@@francoisviau7101 Parce que j ai fait mon propre design et je ne pense pas que de vendre une version qui n est pas universelle, serait bon pour vous. Des que vous voudriez acheter un équipement standard, il ne s accouplerait pas avec mon SSQA

[@Erik-re1ih]

Wish you could do an intro for solid works

[@VinyB57]

Oh...I mean IU know a few things on Solidworks (been using it for the past 15 years, on everday 😅) but this is not the kind of content people want to watch on this channel! Sorry mate!

[@bubba1398]

Do you have plans available for this??? I'll buy them

[@streaming-n8y]

Je vien de fabriquer un loader de a à z sur mon bolens 1704 1989. Je me reconnais vraiment dans ton video. Coupe au plasma cnc, soudure, conception, solidwork, tout ce que je fait. J'adore ton travail. Dans quel coin au Quebec tu est?

[@VinyB57]

Ah c est cool, content que tu apprecies mes videos! Je suis de Québec!

[@streaming-n8y]

@@VinyB57 👍 daccord je suis dans les laurentides

[@VinyB57]

@@streaming-n8y 👍👍

[@Mong3532]

hi, what program do you use for modeling

[@09alvaha]

Do you buy from auctions?

[@rjung_ch]

👍💪✌️

[@VinyB57]

🤙👍👌

[@jaypeerobot3745]

I think your mistake with the width was because you measured the brackets on the bucket and not the actual width on the loader arms themselves. At least you tacked it first and double checked the width.

[@szki272]

For the lever tension on mine it has a riser where your bolt goes in the bolt then tightens against a washer and the tower. the tension on the lever is supplied by the spring over the tower. You can see the springs in this video. kzbin.info/www/bejne/p2nEY3SjpcSph9ksi=IdTOheHzC1xsALXT&t=22

[@timeverhartofficial]

That is not even the stock bucket that was sold with tractor. looks like some custom number someone made.

[@beingabdaal950]

Hi viny b could you please help me out with a 3d design

[@VinyB57]

Sure! Send me infos to my email [e-mail]

[@RetiredRhetoricalWarhorse]

"Wear better protection than a long-sleeve sweater!" Proceeds to weld in a t-shirt. Sometimes I love youtube :D

[@VinyB57]

You're right! 100%

[@oldpacha]

Tu peux le faire en françcais. N'ai pas honte ;-)

[@VinyB57]

J ai vraiment pas honte, avec l anglais je rejoints beaucoup.plus de monde ainsi!

[@fares5722]

C’est mieux en français 😂