DIY Pallet Fork Attachment for my tractor

[@VinyB57]

For Standard SSQA PLANS and DXF files: 57design.ca/products/skid-steer-quick-attach-receiver-plans-dxf-files-ssqa

[@ccga3359]

If you add a cutout at the centre of the bottom rack it'll be easier to install or remove the forks. Just move forks to centre and tilt forward it releases the bottom, lower and back out. Installation is reverse. You'll never have to pick up a form by hand and slip over the end. Plus you can now add a stop at the end of the rack to prevent the forks from sliding off. I'm guessing your next project has something to eliminating your enemies and getting rid of the evidence... Smart!

[@Crewsy]

I came here to say just that. Usually the cutout is only big enough for one fork so when you use both forks pushed together they won’t come out.

[@stephenlehr6020]

@@Crewsy That is a good point👍

[@rjung_ch]

Nice fork attachment Viny, can't wait for the snow blower! 👍💪✌

[@VinyB57]

Thanks buddy!

[@htownblue11]

Viny B!!!! My man! Thanks for the always entertaining us and making us chuckle along the way. 😂😂😂 when he cussed the broken stud…..

[@better_than_nothing]

Yes Viny, we've all seen your SSQA video and we've patiently waited the years between your videos to consume more of your content. Please enjoy this comment as I'll likely be dead before your next video comes out as I'm already in my forties. Here's to hoping we see another Viny B video before the year 2040.

[@VinyB57]

HAHAHA 🤣....you should see 2 before the end of 2023, timelapse on the backhoe and the snowblower!

[@robertjohansson3182]

I just found this channel two hours ago with the electric power steering video, very cool! I too have an old tractor that I would like to modify but sadly I do not have the skill or tools to do it. So instead I will just go out and look at the tractor, sigh, and then go back in again.

[@VinyB57]

Hey thanks Robert for the comment! What is your old tractor?

[@robertjohansson3182]

@@VinyB57 its a 1982 Kubota L245, I bought it real cheap and it has really paid for itself. I did not think I needed a tractor, but man, when you get one its really awsome to have. I think that next years project is to get a quick connect, in my case it will be a ’Trima’ quick connect, to get in on that sweet pallet fork action. I also have a front mounted hydraulic snow blower so I really look forward to that video!

[@bobloblaw9302]

Very good. Love that sense of humour.

[@t3m3lkov85]

Man, your videos are the absolute best.

[@VinyB57]

Hey thanks man!

[@andyb7754]

Love watching your builds Viny B. When I was younger I'd like to do the same but all we had were hammers and chisels (I'm old!!)! LOL. Keep the videos coming please. Thank you for your time and expertise.

[@DatBoiOrly]

heck yeah i'm glad yu listened to me about the fork's

[@Olaf236]

That was the most enjoyable build I’ve ever seen on KZbin, thank you!

[@VinyB57]

Thanks, I'm glad you enjoyed it! 👍

[@colinsmith7385]

Thanks Viny, marvellous entertainment for a stormy Saturday morning in the UK

[@salmonforever6088]

I don't comment very often. But when I do it's well deserved. Bravo to you🎉🎉🎉. Your projects and video style is fantastic, keep up the great work!

[@Racin-72Charger]

Another sweet build Viny!

[@AustinCoulson]

You'd have more time for grinding if you weren't wasting it on sex... Your currency exchange is not far off. I have traded car parts for firearms many times I love the pallet as a mobile storage idea 16:14 Hey, thats me! I have already scratched that rig in a few spots :( Very satisfying to see the lawnmower get packed up and stored away. I don't know if you know or not, but that rig you've built is going to be a GAME CHANGER for you

[@saneauto]

4:40 The Colonel - Zachariah Hickman

[@VWJawbreaker]

Another fine job!

[@VinyB57]

thanks man!

[@noahingram8052]

8:20 Exhaust pipe resizing

[@VinyB57]

Yep!

[@bow-tiedengineer4453]

The joys of palletization!

[@schwerti94]

You have to lift the forks slightly at the bottom with one hand and push them at the top with the other hand. You also need grease. The forks on my pallet fork can often no longer be adjusted properly if they get too dry

[@Dean2die4]

Nice! new VinyB with moustache video! Gonna count the times you said “its a game changer”😂😂

[@SiboBushings]

Good job Viny!

[@bobbymcbulge18]

Thank you for fixing that muffler (3 times)

[@Zebronn97]

this guy should make a SSQA video. would love to see that

[@hollandduck79]

hello from the Netherlands. thanks for the video Viny. Kind regards, Hollandduck

[@adman6380]

Game changer, great as always

[@RCAFpolarexpress]

Good Evening Sir👍😇I like Very Much Your Sense Of Humor 🤣👍👍 Very Nice Mahindra at 10:58 😇👍Cheers 🍻🍻

[@VinyB57]

Glad you liked it!

[@VinyB57]

I wish I could afford one like you 😉

[@junkman6261]

I love your videos man!!! Happy New Year!!!!

[@VinyB57]

Glad you do! Happy new year to you too!

[@NikoMrkoci]

I love watching your videos more than everything, great content, keep going!

[@VinyB57]

Thanks Niko!

[@robertwikeljr-1522]

A word about exhaust going down and forward --- If you go through the "scrub" things can some how find their way into that tiny little pipe and bend or break (at the worst time).

[@lwwarren]

Lay the muffler down and route the exhaust under the tractor and out the back by the 3-point hitch or at least just past the driver's station. The longer the pipe the quieter the exhaust. 😉

[@z.p.m.n.8240]

Great video, I'm dream of starting my own attachment company, starting with the basics forks, buckets ,grade bars, hay- bale spir, Etc... I can conceive the production of the headache rack/ brick gaurd like you have done here, but I am wondering what method/ process I can come up with to make the actual fork tines ...? I've searched up & down and found very little info on the bending and tapering that goes into making tines. If nothing else I may be the first to post a video of my solution I come up with. .

[@PatrickKQ4HBD]

11:01 La 4e fois est le charme? 4th time's the charm? Could you use your loader bracket as an exhaust header and blow it out in front of your axle? Maybe too much flex, but it's an idea.

[@VinyB57]

I'm not changin it again! 😅Well, it's an intereting idea, but my loader is ''quick attach'' with my tractor and the beam in the way of the muffler is part of the loader and the not the tractor, so when I'm removing the entire loader, that part is gone too! But thanks for the idea!

[@grzegorzsekowski6918]

Świetna robota. Teraz czas na krokodyla 🙂 Pozdrawiam z Poland

[@boodastreetball8468]

Hello love the video I find super funny the way that you switch sometime from english to frensh its vraiment drole

[@trentmunn9486]

I need a tractor so I can build the attachments!

[@VinyB57]

yes YOU DO!!!! 😅

[@mbanour7570]

Merci

[@Tropaxseli]

They are heavy af. I bought 2 forks 2 months ago... Lifting the last one on my trailer costed me 2weeks in bed and 1month of no work and back pain. They are still on the trailer.... I dont dare lift them again yett....lol

[@S-Lab52]

Как всегда превосходно!

[@z.p.m.n.8240]

Searched the web up and down and have not found one person who actually makes their own legit fork tines . Bending flat bar and tapering Etc.. any 1 have any info ? Thx and great video

[@mrMacGoover]

What provice do you live in? My guess would be Quebec.

[@nerraw117]

do you have any of the plans for sale? So I can cut these out

[@filipe363]

Seems you got to build something to lift heavy objects kkkkkk your back will be grateful

[@VinyB57]

you're so 100% right! 👍

[@Rusty_Nickle]

I'm kind of surprised. I thought Canada was all about the metric system

[@VinyB57]

Oh I wish!!!! 🤦‍♂️

[@Rusty_Nickle]

@@VinyB57 that really surprises me

[@pascha4527]

Met de la graisse sur ton guide en haut des fourches. Tu forcera pu si tes fourches sont pas trop tights. (venant d'un gars d'lift)

[@gui96]

Le prochain projet devrait petre etre un toit 😂

[@VinyB57]

Tellement mon ti-Gui!

[@rjung_ch]

You only said it 4 times, including the one before the challenge.

[@VinyB57]

I counted 5...🤔 🤷‍♂️

[@rjung_ch]

@@VinyB57 must have slipped by me. It was fun as expected, cheers Viny.

[@cliftonsnider1520]

Too bad all that snow and rain is going to run right down onto the middle of the new shelving. 🤷🏼‍♂️

[@VinyB57]

Yeah, I m planning on putting a roof on it, but for now, everything has a bache on it, as a protection...not the best..

[@arturraimundo7158]

20USD and s shotgun!? More like 2 washing machines and a lawnmower.

[@robertwikeljr-1522]

😅 I can see why You refer to being poor with all those power tools (shop envy).

[@VinyB57]

Well...I built half of them and the other half was old tools that I brought back to life...so yeah..I'm too poor for new stuff...but not really poor, now with all that tooling! 😅

[@robertwikeljr-1522]

@VinyB57 Nice rebuilds and do it yourselfers, sometimes better then commercial stuff.

[@vannewman4777]

I noticed in your graph you had a number for sex. You have 2 kids! Why are you still having sex when there are things to do in the shed. love your video's, projects and humor

[@giv1191]

?? Where is a smart car

[@VinyB57]

the smart will be back next summer!!! Can t wait to race it!