Рет қаралды 3,932
Building heavy duty attic style trusses for the garage / shop project. Diy homemade attic truss rafter build for a barndominium, pole barn, garage, shop, shed or any outbuilding really. Sometimes it's best to build it yourself. I used plywood gussets, PL glue, and ring shank twist nails. It was a lot of work and a big undertaking for me but when I was quoted around 12k for trusses I did the math and saved about 5k total by doing it myself.
Here is part 1 of the truss build • Building diy Attic Tru...
Here is a list of tools mentioned in the video. If you do end up purchasing through my link it will help support the channel at no extra cost to you.
amzn.to/3RkCAWW metabo coil siding nailer
amzn.to/3sNnvnC ear plugs
amzn.to/3GoYlyI PL 375 heavy duty construction adhesive
amzn.to/414u7uh quiet air compressor
amzn.to/3Mbf1wT easy glide spray for saw surfaces
amzn.to/3ddiXPc here is the Topcon laser transit level that I use for all this building prep. Super accurate and easy to use. I love mine.
This is a new series on my diy 32 x 56 garage - shop build. I want to show you how to start building a garage or shop from the very start of just having a empty lot. Watch for future videos on this build. If you want to see how I got this far check out my Garage Build playlist. • DIY Garage build 32 x 56
Find me here too.
Instagram / smarteasydiy
Facebook / smarteasydiy
TikTok / smarteasydiy
I hope this video helped you. Thanks for watching.
#trusses #trussbuild #buildatruss #attictruss #garagebuild #shopbuild