Building Small Bandsaw//DiY Brushless Bandsaw

[@PiefacePete46]

Fantastic, thanks! About four years ago I was planning to build a bandsaw, Inspired by designs from Matthias Wandel, John Heisz, and others. I came across a video which showed a small sized machine where the table stayed flat and the blade tilted. (Sound familiar?). I was really smitten with this idea, and did a Fusion 360 concept design. At this stage my wife found a used bandsaw, solid, in excellent condition... it was too good to pass up, so we bought it, and my plans went into the "I wonder" bin. Your lovely machine has shown me what might have been... it's great! Liked & Subscribed, hungry for more! 😃👍

[@CraftyDude]

👍I was planing to make small wind turbine from this engine, but never find a time to do that so this engine standing for 3yrs, but then this virus appeared I started to make this channel and finded a better way how to reuse this engine. I still have few more ideas, for this type of engine, I think to get them more😀very pleased, that you subscribe my channel, I hopes to make more projects that you like🙂

[@manuelcatumbelamanox2302]

Morte de barras

[@manoonkongracha5825]

จ

[@b3arwithm3]

Most beautiful band saw on KZbin 👍

[@CraftyDude]

Thanks👍🙂

[@mikeperri7246]

This is such a beautiful little machine. It borders on "art". Thank you much for sharing the experience of making it. Very inspiring.

[@CraftyDude]

Thank you🙂👍

[@skitalec24]

Круто, когда самоделкин сам пользуется всеми, своими самоделками👍🤝

[@CraftyDude]

спасибо, а самодельные инструменты хороши, если сделаны правильно🙂👍

[@justa1265]

Widać że wykonanie profesjonalne po prostu SUPER . Ale sprzętu trzeba mieć co nie miara no i czas który w dzisiejszych czasach jest cenny . Mimo to dziękuje za pokaz dokładności Brawo pozdrawiam M.J

[@CraftyDude]

Dziękuję Ci bardzo👍🙂

[@miankhalid7060]

Excellent job ❤God bless you and your hands

[@CraftyDude]

Thank you👍

[@lionelteles8197]

Cela fait plaisir de voir utiliser les outils qu'on a fabriqués

[@ИгорьРостовский-е1ъ]

СУПЕР !!!!! БРАВОООООО !!! БРАВИСИМО !!!! Высший пилотаж !!!!

[@CraftyDude]

Спасибо!!!👍🙂

[@samiammar1192]

المتميزون هم بناة الحياة الراقية وهم يستحقون كل الاحترام والتقدير

[@CraftyDude]

شكرا لك سيدي

[@ОлександрДячук]

Вот это работа. Просмотрел с большим удовольствием. Супер

[@CraftyDude]

спасибо, здорово что нравится моя работа👍🙂

[@armandsan5969]

Whaooo que bueno eres para la fabricación de herramientas, ahora que me retire me conformo con hacer una buena mesa de trabajo de carpintero, jejeje Felicidades y gracias por el video Saludos

[@jeannoelbaillif9824]

Génial, j'ai récupéré les plans, je vais m'y mettre, merci beaucoup

[@RobertSchmitt-u7l]

Ok, this is great. I think you could make its partner, a slabbing bandsaw mill, with two motors, for push and pull action for power transfer and tracking. The advantages are light, no smoke, significantly less noise, less dust, no gas, no vibration, less waste, on site use. Its a great idea, you would actually do a great job making one by the looks of the bandsaw you already made. It would be a worthwhile project, I might do it myself when i finish up several other projects slowly and surely. Just 2 motors, maybe inflatable wheels for tensioning, maybe blade guides, platton just like a chainsaw mill. Lightweight frame, 1 driver for both motors in parallel, Just an extension cord for a probably 48v battery so its actually portable. I have the batteries, these motors are suprisingly cheap, well built and well suited for the task. If one could send 5kw through the bandsaw blade for a slabbing machine, it would cut so easily with confidence and least fatigue. Uh too many projects too many good ideas.

[@RobertSchmitt-u7l]

I would probably specifically make spacer ring guides for the blade with a larger diameter so it grips and doesnt slide off from forward pushing. And or use the larger offroading hoverboard motors, for adequate diameter, and larger cutting capacity.

[@CraftyDude]

Its nice idea, two motors with power 350-500w, combined will produce 700w-1000w power, enough for 25-30 cm wide lumber cutting, sawmill supposed to be lightweight and portable. Well if you thinking about 2-3kw or more, that motors wont be cheap, powerfull controller and high amps power source is necessary, and it wont be cheap too

[@RobertSchmitt-u7l]

@@CraftyDude True, but many motors do support more power and they are hovercraft-like. Like segway motors, cheap enough, 125 each, 1400w stock. A bafang motor takes 1250 watts and its way smaller than the hoverboard ones, so Im sure something can be figured out around those lines of supplying more voltage and or more current, heatsinking.

[@solonroland]

next level craftmanship

[@clockmakerify]

Золоті руки та світла голова!

[@CraftyDude]

Дякую за комплімент👍🙂

[@mbahcarrier1629]

Perfect Work!!!! Seeing your video, I feel amazed and thank you for sharing this video and success always "Crafty ........"....Pekalongan, Central Java, Indonesia

[@CraftyDude]

Thank you👍😎

[@ErCanEverything]

Great job, well done👍🤝🤝🤝

[@seabeepirate]

Nice aesthetic on the finished product.

[@shamshersingh895]

Very good wood cutting little saw

[@elianele5643]

Interesting. I never saw that idea. The looks is so beautyful. I'm frustrated DIYer, if i start some day that's one that i like to try it out. Keep it up, bro. THANKS.

[@CraftyDude]

🪵🔨💪😎

[@markhedquist9597]

Yes. Yes! YES!!! Super awesome! I love it! Now I am on the search for a motor like this...

[@CraftyDude]

👍🙂just search for a broken hoverboard and you will have two motors😉

[@bobnwashington]

Crafty, This was like watching a fine movie. A great design & workmanship, editing. Would make a fine belt grinder.

[@CraftyDude]

thank you👍Now I'm planning to make great scroll saw, but in future I believe I will make belt sander project🙂

[@ahmadbidmeshki]

I can not belive how creative you are 👏🏻👏🏻🧡🤦🏻‍♂️🤦🏻‍♂️

[@CraftyDude]

🤜🤛thank you🙂

[@kalebmarquardt8008]

Has your DIY bandsaw met your expectations with performance. Awesome job by the way.

[@CraftyDude]

Thank you, yes its great small saw, quiet, powerful and useful in workshop🙂👍

[@amitjangra8338]

Bahut acchi bani hai machine

[@CraftyDude]

धन्यवाद

[@raulsoto2088]

Inteligencia... Habilidad, un abrazo desde Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱

[@dobrootut]

Молодец! Круто получилось! Так держать! Чхрэндец как круто! Всем Добра!

[@CraftyDude]

Спасибо за поддержку👍🙂

[@thecelt4807]

im like a kid watching cartoons ..except im 55 lol ..pure magic

[@backyard.craftsman]

Nice built

[@CraftyDude]

thank you👍

[@marjosl1970]

The ideal genius can be imitated

[@lucrebrazzi4069]

Serious smarts. Gosh the elegance.

[@CraftyDude]

🙂👍

[@paulgreen6148]

Amazing there are some really brilliant people.

[@CraftyDude]

👍🙂

[@omskariyazmaraikayer913]

One helluva crafty guy you are . Very inspiring work.!

[@CraftyDude]

thank you!👍😉

[@eammateus]

Great work. Thank you for your generosity in sharing the plans. May the Creator richly bless you.

[@CraftyDude]

Thank you very much, for supporting my channel and motivating me to create👍🙂

[@sharukhmatekuki5830]

Nice 👍🏻👍🏻 🇮🇳 || Kuki

[@CraftyDude]

👍👍🙂

[@homemadetools]

Nice little bandsaw! We shared this video on our homemade tools forum this week 😎

[@CraftyDude]

👍🙂

[@crafter2u]

nice piece well done a real crafter

[@CraftyDude]

Thank you👍🙂

[@mimo1172]

I love your work ..👍🏻👍🏻👍🏻

[@beylerbeyitas4319]

Sehr schön und Perfekt danke Dir fürs teilen .👍🏽👍🏽👍🏽

[@CraftyDude]

Danke fürs gucken🙂👍🙂👍

[@НикНиколаев-й8с]

Хорошо получилось.

[@MichaelVorn]

Fantastic job! 👍👍👍

[@CraftyDude]

👍👍👍

[@MichaelVorn]

@@CraftyDude 💪💪💪

[@MichaelVorn]

@@CraftyDude The only saw with an open blade that poses a security threat. But! The beauty of the car demanded this sacrifice! :)))

[@chkiswantoardi8462]

What a wonderful job.. thanks for sharing the video..👍👍👍

[@CraftyDude]

Thank you for watching😉👍

[@HerrV29]

Ta scie à ruban est juste magnifique. Le design est de haut niveau. C'est, pour moi, l'une des plus belle que j'ai pu voir sur KZbin. L'idée de monter ce type de moteur sur cette machine est génial. Bravo, je m'abonne à ta chaîne, car j'ai hâte de voir la suite.

[@TrionoBara]

Great work 👍👍

[@CraftyDude]

thank you🙂👍

[@davestinyworkshop]

thanks heaps for sharing, looks like a very practical project!

[@TopCat2021]

Very nice build,it looks too nice to use. I hope it gives you lots of trouble free service.

[@CraftyDude]

thank you👍 Its a tool which I needed, so it has to make a job😉

[@joaorodriguesdesousa6699]

Grest! I liked very much. Thanks.

[@CraftyDude]

Thank you🙂👍

[@cho4d]

very nice! lovely design

[@CraftyDude]

👍🙂

[@mayconlopez5929]

Wow, more than excellent work

[@CraftyDude]

thank you😉👍

[@TukangInterior]

Luar biasa creatif

[@martinbustamante5261]

Es una chulada .muchas felicidades .desde Xalapa Veracruz mexico

[@CraftyDude]

👍🙂

[@didimoco5457]

Bom dia Crafty Dude Diy's um belo projeto esta pequena serra de fita parabéns pela obra prima abraços.

[@CraftyDude]

Muito obrigado👍🙂

[@joserobertooliveira2082]

Por favor se possível mandar as medidas básicas da maquina e materiais utilizados

[@69ennio]

troppo bravo, complimenti

[@rogeriolimapereira]

You're a genius 👏🏻👏🏻👏🏻

[@CraftyDude]

👍😉

[@bobweiram6321]

It would be really cool to use the wooden parts as patterns for making cast aluminum parts.

[@CraftyDude]

Great idea👍🙂

[@luiscarlossuarezmarquez264]

Wowwww, you're amazing pal!. I'm very impressed with your work 👏 👏 👏 Congrats

[@CraftyDude]

thank you👍👍🙂

[@Nitecrow314]

Did I miss it?? What power supply are you using, 36v battery? Nice design & using hoverboard motors has got me thinking!🤔

[@CraftyDude]

while making this project I used laptop power supply, 15V 75w🙂 and that was enough to make cuts, but now im using 36V power supply, but obviously you can use 36v battery for this engine👍

[@KhaiTamArT]

#Oh ! wonderful. You create a beautiful little machine, very beautiful and practical. Thank you so much for sharing your experience doing it. I really like your product!

[@CraftyDude]

Thank you👍🙂

[@MizanurRahman-ql3jc]

Hi Very nice

[@CraftyDude]

👍😉

[@РодионЗиновьев-ы6ъ]

Боже!как просто!А разве так можно было?!!!

[@CraftyDude]

может быть и так😉👍

[@frog4343]

Золотые руки

[@cyrilalquizalas8013]

Good day! thanks for sharing your brilliant idea and creativity it's fantastic I hope you build a very huge ship saw And pls put all the measurements and plans take good care always,more power to you and God bless you

[@youtukang]

👍👍👍

[@CraftyDude]

thank you👍

[@MakeshiftFrank]

This is an incredible build. Thank you for this video

[@CraftyDude]

Thank you for watching👍🙂

[@ShansShan-n7q]

Is machine ke bare mein batao Jo machine abhi jo chir aaega Diye brick ki Rai karila ki chij Ne wali machine ka price batao

[@martyjohnstone9362]

Excellent video and superb craftmanship! I envy your skill! Best regards from Marty (uk).

[@CraftyDude]

Thank you Marty👍🙂

[@martyjohnstone9362]

​@@CraftyDude Your very welcome! I subscribed to your channel. Looking forward to your future projects! Regards, Marty (UK).

[@karlscraft6631]

Very nice👏👏👍

[@CraftyDude]

thank you👍🙂

[@karlscraft6631]

@@CraftyDude wellcome.. Visit our channel, please support.. Thank you, God Bless🙏🙏

[@svak1961]

оно конечно прикольненько и стильненько когда фанеры и винтов-шурупов до фига и больше

[@운눔]

It's an amazing work. Thank you for the video

[@CraftyDude]

Thank you👍🙂

[@هشامسعيد-ح8م]

Very nice

[@CraftyDude]

👍🙂

[@АнтонВалентинович]

Отличная работа👍

[@CraftyDude]

Спасибо👍👍🙂

[@shaukathameen2808]

Designer Level

[@cokhichetao72]

Tay nghề tốt 👍

[@CraftyDude]

cảm ơn👍🙂

[@Edmorbus]

Great work thanks for sharing

[@CraftyDude]

thank you for watching👍🙂

[@rafiqahmed5233]

Good work but very costly

[@CraftyDude]

It's not expensive, especially if you have old hoverboard and want to reuse it😉👍

[@henryecheverria239]

Gracias felicitaciones y siempre adelante

[@CraftyDude]

Gracias👍👍🙂

[@doggylv]

Wow…love it, great job!!!

[@CraftyDude]

Thank you🙂👍

[@СимаГоробец-ж8ь]

о материалах: разливное из отходов (прес, клей-масла )-пластик ,или опилки, или козье сено(корм) ,чипсы-картон ,потом запара...(роб . материалы одногодние, тара, упаковка.; струю -проклейка, рисование -маркер...............; клей -грунтовка , если...

[@Deetalks87]

what an adorable little band saw hahaha, can you use both motors of the hoover board ? 1 ontop and 1 on the bottom? giving us double the torque ? or is that overkill... or de-sync issues?? just curious that's all, thank you for sharing this.

[@CraftyDude]

If u get right controller, I think its possible, but then you have to make bigger wheels and bigger saw, couse for this small baby its more then enough one engine👍🙂

[@ericrodrigue893]

Well done 👏

[@CraftyDude]

Thank you🙂👍

[@bretteee]

If I had all those tools I think you could buy a small ban saw

[@CraftyDude]

In these days you can buy anything, but I like to make projects like this one🙂

[@JuanGarcia-1125]

Qué chulada de máquina! Creo que la voy a replicar? Cuento con tu permiso? Saludos desde Reynosa México amigo!!!

[@CraftyDude]

Gran idea, gracias amigo🙂👍

[@JuanGarcia-1125]

@@CraftyDude Gracias a ti por compartir tus ideas amigo. Saludos desde Reynosa México!

[@atuycreator1252]

Wow krean bos👍

[@CraftyDude]

👍🙂

[@gapedepartmant1626]

Fantastic

[@vasilynazarov4403]

Красота!!!

[@CraftyDude]

Спасибо👍

[@bradleytuckwell4881]

Brilliant

[@CraftyDude]

Thank you Bradley👍

[@Subman728]

great build, did you use anyother part of the hoverboard except the motor

[@CraftyDude]

no I use only motor, link to controller for motor I left in video description section

[@miguelubiedo7409]

Gracias amigo por los planos 👍👍

[@bashirahmad-xu2zk]

So good.

[@CraftyDude]

👍🙂

[@Watcherrye]

After consideration, after watching this video, What brand of Bandsaw do you suggest buying?

[@CraftyDude]

DiY😉 I cant suggest as I didnt try all the brands, but If I decide to buy one I will try to find more information about Makita, usualy that tools have nice quality for good price🙂

[@puzzlemetin3906]

Gerçekten harika 👍

[@CraftyDude]

👍🙂

[@unperrier5998]

Excellent

[@CraftyDude]

Thank you🙂👍

[@antitheist9976]

I love this build, very nice work. I have a question, what is the blade length. I may have missed it in the description. Thanks in advance 🙂

[@CraftyDude]

Thank you👍check the link to plans in video description section, there is all info🙂

[@piotrnapieraa5422]

👍👍👍Super 👏👏👏

[@CraftyDude]

🙂👍

[@halvavich9282]

Отлично

[@dheadandia8534]

keren ..... !!!

[@josephamolo7560]

This incredible man..👍🏆🏆..it deserves it. Can I get a drawing? If so how

[@CraftyDude]

Check video description section😎

[@turbotoadplays7302]

Hate to burst your bubble, but this is not a bandsaw but a mini ship saw. The difference being that on a bandsaw, the blade is in a fixed position and the table is adjustable. Where as the reverse is true for a ship saw.

[@CraftyDude]

well, it's not a ship, it's just a saw😉

[@claudiotadeusilveira]

Ótimo trabalho é muito capricho parabéns

[@CraftyDude]

obrigada👍🙂

[@yossiyaari3760]

Brilliant!

[@CraftyDude]

thank you🙂👍

[@jocelyndrolet4610]

This is such a nice project. Congratulation! Do you happen to have stl files for thoses parts, I would be interested to print them on my 3d printer. The community of 3d printer users is very large so I am absolutely certain, hundreds if not thousands of them would be delighted to produce it. Good job!

[@CraftyDude]

Thank you👍😉

[@JuanchoEnterprises]

kzbin.info/www/bejne/oYS2kJWhoNOEg9k

[@fadlycruel9961]

Artistic ❤