Building The Vintage Model Company Cessna 140 Covering The Fuselage

  Рет қаралды 9,967

Rob Brennan Balsa Wood Planes

Rob Brennan Balsa Wood Planes

Күн бұрын

Пікірлер: 20
@peterwilliams3613
@peterwilliams3613 4 жыл бұрын
Thanks Rob, didn't have a set of instructions so this was very helpful, just the wing to build now and the Cessna will be almost ready to Go!
@thecontractor365
@thecontractor365 5 жыл бұрын
Wow Rob that was a long process, especially having to do prep work on top. You are very patient as this would drive me mad. But it's the individual passion for a model that carries us through. Great upload as always.
@robbrennanbalsawoodplanes
@robbrennanbalsawoodplanes 5 жыл бұрын
Yes it was a lot longer than some of the other builds with all that prep work. I find it quite therapeutic and keeps me out of trouble, well it did till I started on my sisters house lol.
@phylomeno1
@phylomeno1 3 жыл бұрын
Hi, first of all I want to thank you for showing us this great tutorial... congratulations! Do I need to ask what you painted or prepared the y and z covering parts of the model's nose with? thank you
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 5 жыл бұрын
That was WAY more fiddly than I thought!!! At first I thought you were applying Tissue SECTION BY SECTION!! 😳😳😖 Glad it was just the few around the Landing Gear. The Cowling solved a mystery I had... I did not know HOW you were going to get those curves, without any stringers. It really looks good!!
@robbrennanbalsawoodplanes
@robbrennanbalsawoodplanes 5 жыл бұрын
Yes I think you could do the whole bit around the wheels in one but it looked easier to do in two parts following the instructions.
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 5 жыл бұрын
I'm sure you COULD... But I'm also certain that you would never be content with the results.
@andrianfalsyah19
@andrianfalsyah19 3 жыл бұрын
Thank..👍👍👍🙏
@vladnickul
@vladnickul 5 жыл бұрын
I had a kit once , a large glider with a flat tear shape fuselage 2-3 round holes in the "cockpit" for lead and a double dihedral wing and I believe it had a yellow.black paint scheme.Had to be a european or russian made kit, it was my first one and I never finish it. I like to do it now.Maybe one could recommend a similar one...
@NSRBOY250
@NSRBOY250 5 жыл бұрын
Brilliant going mate you had me laughing near to the end of the video wen you sed ( here’s one I did early early blue peter ) good going mate she is coming along just nicely 👍
@robbrennanbalsawoodplanes
@robbrennanbalsawoodplanes 5 жыл бұрын
Hi Kirk. Yes mate, my era was mainly John Noakes (get down Shep) Peter Purvis and Valerie Singleton lol.
@timothyjcoyne
@timothyjcoyne 5 жыл бұрын
Hi Rob, you are very talented and I have learned a lot from this new video format which includes commentary. The earlier format with just music was good and I learned some great tips from those, but this is a great improvement because of your voice comments. I am currently building a VMC Tiger Moth and have completed the upper and lower wings, centre section and fuselage. I have been dreading the landing gear and my nose block is not exactly a work of art. I wish I had found your videos earlier! I find the jig for setting dihedral on the wings a bit imprecise. I would prefer to have a height above the horizontal to set the wing tip to and then set the wing root rib vertically to that (if that makes any sense), rather than using the jig to set the angle of the wing root rib against the wing pinned to the board. Do you have any advice?
@robbrennanbalsawoodplanes
@robbrennanbalsawoodplanes 5 жыл бұрын
Hi Tim. Sorry for the delay in replying but I have very limited access to YT at the moment. I do agree with you about the dihedral jig. You could contact VMC and ask them what the angle is on the DG or measure it with a protractor and measure the length of the wing then draw it out on a piece of paper to get a triangle and should give you the height the wing should be at to then mount the root rib vertically. Other than that I would suggest you check out this forum www.hippocketaeronautics.com One of the members on this forum is the guy who designed the VMC Tiger Moth and I'm sure if you join and ask the question mentioning it's to do with a VMC kit he will reply. Sorry I can't be of more help but I am fairly new to plane building myself as I've only been building them for a couple of years. Thanks for watching and for your great comment
@timothyjcoyne
@timothyjcoyne 5 жыл бұрын
Hi Rob, I have found the dihedral from the official DH Tiger Moth manual. Top wing is 2 degrees, which on the model is .75 cm at the tip, along the main spar. Bottom wing is 4 degrees, which is 1.5 cm at the tip along the spar in the Vintage Model Company model.
@siloburton
@siloburton 8 ай бұрын
I've finished all the wooden parts and found the instructions about covering to be a little confusing so thanks very much for this which has set me straight. A quick question if I may. On their shop the only glue stick they sell is an uhu one but will prit or supermarket glue sticks do the job?
@robbrennanrc
@robbrennanrc 8 ай бұрын
Hi. Thanks for watching and yes any glue stick will do. I use some non branded ones bought from a small shop that sells lots of stuff really cheap.
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 5 жыл бұрын
I'm first! Like it matters. 😋 But I do want my Cookie 🍪 lol Yours is really coming together nicely! This is definitely my favorite of your builds so far. 👍👍 Cheers Mate!! 🍻🍻 Carmine ✈🚂🚙
@robbrennanbalsawoodplanes
@robbrennanbalsawoodplanes 5 жыл бұрын
Cheers Carmine. Hopefully the cookies have arrived by now buddy.
@CarminesRCTipsandTricks
@CarminesRCTipsandTricks 5 жыл бұрын
Yes... But the 6000 mile flight wasn't good for freshness!! 😆😋
@ElOko
@ElOko 2 жыл бұрын
👍👍👍
Building The Vintage Model Company Cessna 140 Final Assembly
41:29
Rob Brennan Balsa Wood Planes
Рет қаралды 15 М.
Building The Vintage Model Company Cessna 140 Covering The wings
25:13
Rob Brennan Balsa Wood Planes
Рет қаралды 4,4 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Building The Vintage Model Company Osprey Sport Glider
29:48
Rob Brennan Balsa Wood Planes
Рет қаралды 3,5 М.
Building The Vintage Model Company Cessna 140 The Fuselage P1
21:10
Rob Brennan Balsa Wood Planes
Рет қаралды 3,3 М.
How To Sand Balsa Wood Models | Balsa Basics
3:12
VintageModelCo
Рет қаралды 30 М.
Building The Vintage Model Company cessna 140 Main Wings
19:25
Rob Brennan Balsa Wood Planes
Рет қаралды 2,5 М.
A Camel in motion - with surprising ENDING
7:56
TOMs Modelling in Motion
Рет қаралды 442 М.
Guillows P51
7:43
My R/C Center
Рет қаралды 8 М.
How To Modify and Fly a Tethered Rubber Power Model with Dave Gee
12:15
Academy of Model Aeronautics
Рет қаралды 640 М.
Building The Vintage Model Company Cessna 140 Nose Block Wing Supports and Wheels
17:43
Rob Brennan Balsa Wood Planes
Рет қаралды 1,7 М.
Flight on the Antonov An-2 biplane: from engine start to landing - Legendary Sound
40:16
Sergey Vyatkin | An-2 pilot
Рет қаралды 1 МЛН
Building The Vintage Model Company Cessna 140 fuselage P3
18:07
Rob Brennan Balsa Wood Planes
Рет қаралды 1,6 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.