Thank you all so much for watching! I recently released some merch through teespring and it would mean a lot if you could check it out and comment to let me know what you think. Also if you have any suggestions feel free to reply as well. Link: builds-with-v.myteespring.co
@haziqkel3 жыл бұрын
Did you buy 2 lian li RGB just like in this video ?
@justinedge50612 жыл бұрын
@Haziq Kel don't buy it bc it's junk bc it's doesn't ever work on Asus motherboards
@BuildsWithV2 жыл бұрын
@@justinedge5061 I’ve used it on Asus motherboard and it worked just fine
@vaynecounter3509 Жыл бұрын
Thats so true
@wyatttaylor38004 жыл бұрын
this is probably the simplest but most informative video I've ever watched, this is an amazing video!
@BuildsWithV4 жыл бұрын
Wyatt Taylor Thank you so much 🙏
@wagecuckwojak23943 жыл бұрын
Agreed, simple but great way to show how the controller work with split screen👌🏼👏🏼
@wagecuckwojak23943 жыл бұрын
I also just orderd these to my GPU and and the 24-pin to my new build cuz of your video, great to know that you dont ”have” to plug it into the motherboard but instead just run it with the little controller that came with it, cuz my motherboard would’nt have had enough RGB-Headers:)) so thx alot, i owe you a subscription :P
@BuildsWithV3 жыл бұрын
@@wagecuckwojak2394 Nice! Yeah I like how they gave us more than just one option. I appreciate it 🙏 Thank you
@wagecuckwojak23943 жыл бұрын
@@BuildsWithV thx again for the review! 🙏🏻
@fuckingUtubeisgay3 жыл бұрын
probably the only video that shows how its properly installed.
@j.a2613 жыл бұрын
"These cables come with the cables" *hmm yes, the cable here is made of cable* (Not hating btw this vid was good)
@BuildsWithV3 жыл бұрын
😂😂😂 Made my day. Thanks for watching 😊🙏
@sxtexvn29933 жыл бұрын
lmao
@ChristosLouridas3 жыл бұрын
Bruh I thought the exact same thing... haha awesome. Nice video though, ofc I'm watching my pc on the desk. Looks cool xD
@DeepakVerma-pk6mf3 жыл бұрын
perhaps the most detailed and clearly explained video I came across in pc building Nive work V keep it up :)
@BuildsWithV3 жыл бұрын
Thank you so much 😊
@bornagain26413 жыл бұрын
Don't get around much?
@ivanmichaelgonzales78733 жыл бұрын
Wow I been looking on how to install these. Didn’t know you can just plug them into the PSU cables. Thank you so much for making this video! I subbed!
@BuildsWithV3 жыл бұрын
Glad this helped. Thank you for watching and the sub 😊
@abeagil3 жыл бұрын
Does that mean they don’t need the sata cables?
@boarhead85553 жыл бұрын
You gained a sub simply because no PC build tutorial could help me find where to connect my SATA cable 😂 but your random video that showed up in my recommendations did !!
@BuildsWithV3 жыл бұрын
That’s awesome! I’m glad it helped you out 😅 Thank you for watching and the sub 🤘
@stvnellis163 жыл бұрын
Thank you for the vertical GPU instructions, the in box slip doesn’t do that great a job!!
@herbzeitenberg29733 жыл бұрын
Thanks for the super video. You’re a lifesaver. This is one of the best RGB installation videos that I have ever seen, so thanks again...... keep up the great work.
@mihirarya86013 жыл бұрын
Thank you so much for this video! It’s extremely well-made. I had two quick questions: 1. Can you skip the ARGB cable and only have the SATA plugged in if your motherboard does not support ARGB? 2. If your GPU has a single 8-pin port, can you remove half of the cables and reposition the remaining to be in the center of the LED strips? Thanks!
@BuildsWithV3 жыл бұрын
Thanks so much. Yes you can plug in only the sata cable and everything will work and yes you can move the 8-pin to be centered and only use half of it.
@ravell28542 жыл бұрын
If your mobo doesnt support argb then.... whats the point of buying an argb cable extension? you will pay premium for a simple cable extension
@frostyybeann Жыл бұрын
@@ravell2854some mobos don’t have the 5v argb plug, only the 12v which is what he probably means , I have the same issue.
@brutaldabs58292 жыл бұрын
gatta love ppl like this guy that respect someones time great vid
@BuildsWithV2 жыл бұрын
I’m glad I could help out 🙌 Thanks for watching 🙏
@atomic_time_traveler46263 жыл бұрын
This video was amazing & incredibly helpful! Appreciate the work you put into this & the detail you went through for it!
@BuildsWithV3 жыл бұрын
Happy I could help 😊 Thanks for watching 🙏
@NewRyoheiOFC Жыл бұрын
You saved me with your video, I'm Brazilian, I was looking for videos like yours in several places, you taught that if we use the board vertically, we should invert the RGB side, and that's what I was looking for, thanks, I already liked it !
@acidwizard65282 жыл бұрын
I just got these and installed them today. Thanks for making this video as it helped me flip around the RGB cable for my GPU. I had no trouble getting the 24 pin to work, but couldn't figure out why my triple 8 pin cable was backwards and how to fix it without breaking anything. It's all back together and looks awesome. Good luck to anyone else installing these, it's worth it if you are an RGB enthusiast.
@spawn78992 жыл бұрын
Can you put white color or any custom color
@acidwizard65282 жыл бұрын
@@spawn7899 It has all the standard LED colors and several different patterns. White is an option and for each color you can choose a pattern, the speed of that pattern and the brightness. This is if you use the controller that comes with the strimers. You can also connect it to your motherboard and control it through software which should allow you to make your own custom color, although at the cost of using the excellent patterns that are designed explicitly for the strimers.
@cann41624 жыл бұрын
Thank you! I started my rgb journey but I got hella confused, after this now i got the basic understanding now. Thanks again.
@BuildsWithV4 жыл бұрын
Noon m That’s great! I’m glad I could help. Thank you for watching 🙏
@gabrielsummerfield31823 жыл бұрын
Im still confused what if you have 1 8 pin port and 1 6 pin port on your gpu
@BuildsWithV3 жыл бұрын
@@gabrielsummerfield3182 just plug in the 8 pin and then only plug in 6 pin. Leave 2 pins unplugged.
@jono2023 жыл бұрын
This is exactly what I was looking for, thanks for putting this together.
@BuildsWithV3 жыл бұрын
Awesome! Glad I could help 😊 Thank you for watching
@guillaumelm8853 Жыл бұрын
Man I swear during the whole video I though Matt Daemon was explaining to me how to plug strimer plus V2 😂😂 Your voice and the way you talk is just exactly the same it's crazy
@BuildsWithV Жыл бұрын
That’s pretty cool 😅 never thought about that
@Atag0123 жыл бұрын
Thanks for this, wasn’t sure how to flip the cables around on the 8 pin
@BuildsWithV3 жыл бұрын
You’re very welcome, thank you for watching 🙏
@tanh33322 жыл бұрын
Literally the first video i’ve come across that is actually informative and straight to the point!
@BuildsWithV2 жыл бұрын
Glad I could help 😊 Thanks for watching 🙏
@stefanlaterra57972 жыл бұрын
Amazing video, however with the controller being inside my case, hard to access it for the buttons so even though it is better, I can imagine using the MOBO software would be far more convenient.
@ndollas43063 жыл бұрын
Awesome video! I was really confused on how to install these to my build until I watched this 👍👍
@BuildsWithV3 жыл бұрын
Glad I could help! Thank you for watching 🙏
@llcoolhwip22173 жыл бұрын
Really great video man! I love how well you explain everything and straight to the point 🍻
@BuildsWithV3 жыл бұрын
Thank you so much 🙏
@nivrag00 Жыл бұрын
THANK YOU! I didn’t know the rgb came off of the cables! know thinking back i’m dumb, but sitting here at nearly 1 AM trying to figure out if 180 degree adapters are the move. i have an EVGA 3080 and it has a 24 pin, but lian li has a 24 pin one, but ever since i got it i had to make it weird since it has standard pins the have the clip at the bottom. thank you sir!
@whoareyou561013 жыл бұрын
Thinking of getting these but I gotta upgrade my motherboard first. Currently rockin a old budget asus h310.
@wickysmall86072 жыл бұрын
I like that you took the time to go through all type of connections offered. Great stuff!
@BuildsWithV2 жыл бұрын
Glad it was helpful! Thanks for watching 🙏
@Loves2spooch1233 жыл бұрын
Most detailed and informative video, yet simple to understand. Amazing job, mate. Thank you for showing both the controller and software side of thigs.
@Ryan-re1rs3 жыл бұрын
Thanks for the help. Everyone else just shows them working, we know what they look like and bought them because of that. Its nice to see how they hook up and options of hooking them up..
@BuildsWithV3 жыл бұрын
You're very welcome! Thanks for watching 🙏 Those reasons are some of the main reasons I started this channel
@ivanwill4 жыл бұрын
Another great video, now, don’t slow down 😁 I am a little confused. You stated that you can simply connect the SATA for power, and you made it seem like there was no need to connect ANY of the RGB cables. But, if you did not, you would not be able to control any of the lights/colours, right? Or would that simply be done via the controller?
@BuildsWithV4 жыл бұрын
Thank you 🙏 so the only cable needed is the sata power cable. The lighting is controlled with the controller. Optionally you can also connect the addressable RGB cable so you can switch from controller to software control (if you wanna mess with more lighting effects).
@omeryesildere2 жыл бұрын
Bro thanks for the video! I bought the products LITERALLY after finishing you video. I had a lot of doubt about the compatibility, but thanks to your efforts on this video, I have 0 questions in my mind right now. Also horizontal vs vertical cpu cable part was very useful, i will change my vertical gpu to the horizontal one. Thanks again!
@Mordakar3 жыл бұрын
Look at that fricken rats nest. I have one of my own. Can't wait to pick up some of these for myself.
@Prometeo24110 ай бұрын
Hello! Thanks for your video, very helpfull! That extra cable you showed for the 8-pin cable was the answer I was looking for haha I'm getting the 8-pin only. Thanks!
@BuildsWithV10 ай бұрын
Nice! Glad I could help 🙌 Thanks for watching 🙏
@bryancapella45913 жыл бұрын
Hey man, dude video! I recieved the cables aswell today for my build in the Lian Li o11 xl my case when the gpu connectors x3 8pin working? (waiting 3090)
@BuildsWithV3 жыл бұрын
Thank you 😊 Yes it will still work no problem but you’ll have to plug in one regular 8-pin since these only have 2 8-pins.
@vednar993 жыл бұрын
@@BuildsWithV SO they take 2 slots in the PSU? Because my GIGABYTE 3090 only takes two 8 pin. So i can get this!
@BuildsWithV3 жыл бұрын
@@vednar99 yes this will work no problem
@papasmurf55983 жыл бұрын
Great video ! I’m going to buy some ASAP. I just bought 1,000 dollars worth of RGB Corsair QL Fans and now I need these cables. Your Build looks good. Mine’s gonna have 14 case fans with a mix of 120mm,140mm & 200mm RGB Fans. It’s going to look like the Sun. I have an Aorus z590 Mobo with 9 fan headers so will use splitters or whatever it takes to put all these fans inside. Push pull on the NZXT 360 Radiator. View 51 TG Snow case has tons of room and lots of space in the back to hide the cables.
@BuildsWithV3 жыл бұрын
That’s going to look amazing! Thanks for sharing and if you don’t mind sharing a photo of the build when it’s setup feel free to dm me on Instagram @buildswithv
@SouthernCannibal3 жыл бұрын
Where I'm kinda confused is the rgb splitter.. do i need that to get the strimmer plus to work?
@ComdZero3 жыл бұрын
Yes, I have the same problem. I connect it to a splitter. It makes all my other RGBs does not light up.
@StevenMussels2 жыл бұрын
Thanks for the video guide of flipping the connectors - made me realise i want to get this working with my factory PSU Cables so i can avoid extensions but keep the lighting :D
@Nyexcellente3 жыл бұрын
I was stuck between these and the xpg. Thanks for clearing the choice up!
@BuildsWithV3 жыл бұрын
Glad I could help 🙏
@OhItsThat3 жыл бұрын
I came here hoping you’d demonstrate flipping the cables. Thanks man. I have these on my Strix OC 2080ti that has the clips facing up. On my other rig I have a EVGA 3080ti and it has the clips facing down. Now I know how to to flip it. I wish I could control these with iCue.
@heroflow12 жыл бұрын
bro thanks for showing how to handle those things with vertical mount! btw - i am too sitting at my desk all the day watching my pc 😀
@addemslit3 жыл бұрын
Really helpful and informative video. This made my installation a breeze. Thank you
@BuildsWithV3 жыл бұрын
Glad it helped! Thank you for watching 🙏🙏
@Rahzay3 жыл бұрын
Nice work showing both gpu positions. No one else does this !
@trafalgarjaquez27922 жыл бұрын
This is probably the best tutorial on youtube, thank you 🙇
@BuildsWithV2 жыл бұрын
Thank you 🙏 Means a lot!
@tasteslikesalt46723 жыл бұрын
This really really helped me take a part the strimer and reverse it for my vertical mount
@bats.1k3 жыл бұрын
Den trying to do mine for 4 hours now it’s so stressful
@JoSoFijn3 жыл бұрын
this video answer multiple questions i had and even some i didn't even think of
@BuildsWithV3 жыл бұрын
I’m glad this helped! Thank you for watching 🙏
@-Samurize2 жыл бұрын
Great video my dude! And incredibly helpful for folks that are new to this stuff.
@BuildsWithV2 жыл бұрын
Glad I could help 🙌 Thanks for watching 🙏
@Srism-leet3 жыл бұрын
Great vid, wanted to double check to see where I had to put the controller because I think it’s annoying that you have to take your case panel off to change the color
@BuildsWithV3 жыл бұрын
On my most recent build I stuck it inside my case with some adhesive. It’s easier than taking the back panel off since I don’t have to move the pc to take the front panel off but i can’t find a better spot
@toriqsabri3 жыл бұрын
Great guide! I was considering these cables but i got treated to a good explanation on RGB instead!
@jordanjordan33533 жыл бұрын
the laugh on the end when says ; i know allot of people dont care for rgbs but (then the laugh) i do , had me laughing so hard cuz i can relate 100% to that xD thx for the vid and information :)
@xStriker8882 жыл бұрын
Great video man! FYI Lian li do have their own software for the strimmer and fans called L-Connect 3. You can control all cables and fans through that software,
@loippimp60532 жыл бұрын
Bro my motherboard don't have argb header any solution are there for me
@soulcist3 жыл бұрын
This saved my life-- thanks so much for all your hard work on this! Doing God's work for a PC dork like me! :-)
@BuildsWithV3 жыл бұрын
Awesome! I appreciate that 🙏
@justjordan80183 жыл бұрын
Second secret ending of Cyberpunk2077, V ends up as an influencer supporting the corps selling their products :)
@tibbyYT5135 Жыл бұрын
thank you i have been looking for these for forever
@pikkon383 жыл бұрын
Another side note is if you hooked both the 24 pin and dual 8 pin into the controller from the 24pin, then plug that controller into your motherboard head, and then hold M1, or maybe M2... or one of the buttons, itll sync both with your motherboard
@BuildsWithV3 жыл бұрын
Yeah that’s correct. Thank you, I don’t remember if I mentioned that in the video. Thanks for watching as well 🙏
@350Zblue3 жыл бұрын
Thank you for the detailed instructions on how to use this cable.
@stqdio14153 жыл бұрын
Bro keep up this awesome content and u will make mad $, u have my support
@BuildsWithV3 жыл бұрын
Thank you so much 🙏🙏🙏
@lennymarinello70103 жыл бұрын
A very well done, precise video on installing these RGB cables. Your step by step explanation was easy to follow and understand. Quick question. On the RGB controller, could you also control the Corsair light strips where the fan connection goes? Thanks.......
@BuildsWithV3 жыл бұрын
Thank you so much 🙏 Unfortunately you can’t control any Corsair products with these.
@ahmedaltaha60333 жыл бұрын
This video is amazing thank you soo much I was scared to do something wrong but you helped me thank you
@Just_jarmo3 жыл бұрын
Great video. Thank you so much! Will definitely be buying the cables and those fans!
@BuildsWithV3 жыл бұрын
Thanks so much 🙏 Great combo of parts for some really nice RGB! Thanks for watching
@crownandbridge12 жыл бұрын
I love all the Rgb in your system
@BuildsWithV2 жыл бұрын
Thank you 🙏
@jhespher3 жыл бұрын
Lot of tnx buddy!! salute from Spain!
@BuildsWithV3 жыл бұрын
You’re welcome and thank you for watching 🙏😊
@mithilan77723 жыл бұрын
I watched many tutorials and this helped the best thanks!
@BuildsWithV3 жыл бұрын
So glad I could help! Thank you so much 🙏🙏
@szergcom10 ай бұрын
Thanks.. hold the top remote button for 3 sec do help me a lot
@pjocoHUN Жыл бұрын
Same Case and AIO. Love it.
@sushimerce3 жыл бұрын
Great video man, exactly what I needed to see.
@BuildsWithV3 жыл бұрын
Glad I could help 🙌 Thanks for watching 🙏
@LeonOwO2 жыл бұрын
cool video, really explained how these work well but please PLEASE fix your cable management in the back
@Cruiseblackpool3 жыл бұрын
These the cables are a real pain to attach underneath they easily pop out but they look amazing
@1012cichy Жыл бұрын
flawless video man
@ohkayal97153 жыл бұрын
Awesome. My GPU has only a 8pin slot so was wondering if it'll be an issue buying this since it has more than a 8pin insert. Glad it can be adjusted to only 8pin. 👏
@BuildsWithV3 жыл бұрын
Yeah I love it especially since I swap GPUs somewhat often. Thanks for watching 🙏
@lewishikes3 жыл бұрын
great vid, love the rgb ram looks tropical love it.
@BuildsWithV3 жыл бұрын
Thank you so much 😊 and thanks for watching 🙏
@TheWinMD3 жыл бұрын
Outstanding. Much appreciated as I am days from putting these in a new build and was totally wondering if the rgb to mobo connector was able to be used with the controller as well or if I had to choose one or the other. Flipping the GPU cables was a huge tip as well. Thanks
@BuildsWithV3 жыл бұрын
I’m glad I could help 🔥 Thank you for watching 🙏
2 жыл бұрын
If I turn off the PC the effects keep it?, great video bro it helps me to choose those cables, thanks a lot!
@2.Cuzzzz3 жыл бұрын
you should change your fans to lian li sl120. I just know that they would fit your bulid a lot better.
@blade08thАй бұрын
still very useful saving for the build
@aaronhill39433 жыл бұрын
I believe there is a cable in the Lian Li ARGB Cable Kit that can adapt the MB RGB three-pin header cable into the three-pin plug (clip-style) so that you can plug them directly into the Uni-Hub and use the L-Connect software to drive them. I have the cable kit on order so I plan to try it out when it gets here.
@BuildsWithV3 жыл бұрын
That’s what I heard as well but unfortunately couldn’t try it yet
@dr_lulz3 жыл бұрын
Quality video! Thanks, will rewatch.
@Heisennburgg4 жыл бұрын
Excellent video. I love detailed videos like this.
@BuildsWithV4 жыл бұрын
Awesome, Thank you for watching 🙏
@ChristosLouridas3 жыл бұрын
Nice one I'm thinking of getting those in the future. I have rgb Ram and Rgb gpu for now. More rgb needed.
@BuildsWithV3 жыл бұрын
You should! They're sooooo awesome as far as RGBs go!
@iSyvia3 жыл бұрын
a very specific video that helps a lot! thank you so much C:
@BuildsWithV3 жыл бұрын
Glad it help 😊 Thank you for watching 🙏
@0zzy_03 жыл бұрын
And what about performace they say with extension cable you get lower performance
@jxeyu3 жыл бұрын
This video gave me all the answers. Thank you so much
@BuildsWithV3 жыл бұрын
You are very welcome 🙏 Glad I could help
@TheAcadianGuy3 жыл бұрын
This has more rainbows than a commercial of skittles.
@irfok7273 жыл бұрын
Im buying one soon , amazing tutorial! Subbed
@BuildsWithV3 жыл бұрын
Nice! Thank you so much 🙏
@andreasbobzin26873 жыл бұрын
Thx for the Video !👍
@funboxV3 жыл бұрын
awesome and informational vid, keep up the great work :)
@BuildsWithV3 жыл бұрын
Thank you 😊
@barny49343 жыл бұрын
Everything I wanted to know thanks for the great video
@Freesmoke3402 жыл бұрын
GREAT VID MY GUY!!!
@BuildsWithV2 жыл бұрын
Thank you 🙏
@JavierSanchez-si5sj3 жыл бұрын
Really good install instructions! Thanks!
@BuildsWithV3 жыл бұрын
You are very welcome 🙏 Thanks so much for watching
@ghostly44463 жыл бұрын
Hey!! Great video was considering buying these cables and this explains so much about them!! I was also wondering about your GPU tho! I am concerned about my gpu being super close to the glass and breaking it on my O11 case I see you have a pretty big card and the O11 case too! So I was wondering if you ever noticed anything bad with that situation with your glass getting scary hot or anything, might vertically mount my gpu so that chance doesn’t happen and it would look better in general too but thanks for the video really helps me understand a bunch more:)
@MatchaMan3 жыл бұрын
your glass won't break at those temps. even if its super cold outside of the case and super hot inside. unless the air in your pc is like 100 degrees and your room is below zero then you should be worried
@flow66767 ай бұрын
You are my hero, thx for the Video :)
@alfofoGMS2 жыл бұрын
You are cruel.. your video is so good that it made me buy this LOL
@BuildsWithV2 жыл бұрын
😂 Well I’m glad I could help out. It’s gonna look 🔥
@shadowwy63063 жыл бұрын
Nice video, but I couldn’t find where the cable from the power supply was to connect the rgb controller?
@SasamiRari3 жыл бұрын
Out of all the links in the description you posted, none were to that RGB hub thing you showed briefly.
@BuildsWithV3 жыл бұрын
I apologize, here’s one of the links: amzn.to/3zx6Dyq There’s other like it as well. Just look at ARGB hubs and see which one fits best for you.
@une4rth2402 жыл бұрын
Him: Can’t plug them in wrong Me: watch this tho
@azadamaterasu69903 жыл бұрын
Great video. That's my RGB sorted now, and yes, I am like you. I do stare at my PC. :D
@sumanjit1003 жыл бұрын
Awesome cable management 😁😁😁
@mikey211110 ай бұрын
SignalRGB can do a lot more with these strimers.
@ers-tj4to2 жыл бұрын
Thanks for posting this video! I’ve got a question about the 24-pin cable. Would I still be able to route cable on a motherboard with its 24-pin sockets facing the right side of the case? I know that on most motherboards the 24-pin is facing outward which then allows for that nice curved look from the strimer cable. Would that still be case on motherboards with the 24 pin facing to the right of the case? Great video man!
@abid31423 жыл бұрын
Hey V, just had a quick question. At 3:20 I see you can completely remove the RGB element from the included cables, can you also do this on the 24 pin cable? I wanted to remove the included cables and just attach the RGB part to my custom sleeved cables. Ps - great informative video - keep up the good work!
@BuildsWithV3 жыл бұрын
I believe the 24-pin can also be completely taken apart. The reason I say “I believe” is cause I haven’t actually tried it but the cables seem to both be made the same way. I’d assume the 24-pin is also able to be flipped because some motherboards would need it flipped. Thank you so much 😊
@MatTAFacT3 жыл бұрын
Thank you!!!!! I needed this explanation
@BuildsWithV3 жыл бұрын
Glad I could help out 🙏🙌
@ronervine3 жыл бұрын
Great video ! Thank you kindly 👌
@BuildsWithV3 жыл бұрын
Thanks so much 🙏
@LiveLongAmongSports Жыл бұрын
I will make my build now that i got everything delivered but this just caught my eye! I am new to PC building and want to use these strimers for both my GPU(MSI SUPRIM X 4080/Corsair HX1000i PSU 2022) and MSI WIFI EDGE Z790 - Is it compatible? if not what variant should i go for ? I am really lost.. appreciate it!