Built a Truck in 15 Days to Drive 4000 Miles |

Will the '55 Apache drive all the way to Ohio from California?
Subscribe to ‪@DGHD‬ | Merch: debossgarage.com/merch
Watch more episodes of this build: debossgarage.com/builds/55-ap...
Thanks to our sponsors for making this happen! #PEAKsquad #winwithholley #longmaywedrive #Since1913 #pennzoil
‪@peakauto‬
‪@HolleyPerformance‬
‪@QA1TECH‬
‪@toyotires‬ ‪@toyotirescanada‬
‪@Pennzoil‬
‪@SummitRacing‬
‪@LyellStainless‬
‪@Compcams1976‬
‪@MAHLEGroup‬
‪@eatoncorp‬
‪@AdvancedClutchTechnology‬
‪@SilverSportTransmissions‬
‪@classicindustries‬
​⁠scatcrankshafts.com
xotic-performance.com
procarbyscat.com
tewsleyauto.com
northtownmachine.com
/ niagaradyno
We are leveraging our partnerships with preferred automotive brands to get you significant discounts on tools, conversion and performance parts that deliver across North America and around the world so you can save money on your projects. debossgarage.com/membership
TOOLS & PARTS USED - Find the best prices using our affiliate links:
AZ Copper Baer Brakes (Front) geni.us/front-6p
AZ Copper Baer Brakes (Rear) geni.us/rear-6p
DIY Exhaust geni.us/leyllskits
Grassroots Lines & Fittings geni.us/an-fittings-lines
Power brake relocate kit geni.us/KORN3FWDISCDISC
Clutch remote master geni.us/WIL-260-3374
Steering box geni.us/borgeson800130
Steering column geni.us/SUM-771714-NK
Column mount geni.us/SUM-772812
Steering wheel geni.us/S1MS-3600-WG
Procar Seats geni.us/80-1000-41
Gauges geni.us/TF01W
Detroit TrueTrac geni.us/913A586-truetrac
Ford 9" rebuild kit geni.us/MGR-R9R28MK
Timken bearing geni.us/LM102949
AFR heads geni.us/LS3mongoose
SCAT Crankshaft geni.us/forgedseries415
COMP CAMS @.050 238/254 .634 .622 lift on a 115 LSA
Harmonic Damper geni.us/SUM-C2501
Xotic head studs geni.us/CP883
Holley intake geni.us/92mm-midrise
4-Link rear suspension kit geni.us/heidts4link
QA1 suspension geni.us/qa1suspension
Rocket Racing Wheels Booster - Hyper Shot geni.us/rocketracing
Radiator geni.us/FB111
Electric fan geni.us/FB521H
Long tube headers geni.us/2298HKR
Holley EFI Terminator X geni.us/550-905
LED Headlights geni.us/LFRB155
Fuel tank geni.us/ATK0000TOPFILL
Bellhousing geni.us/RM-8019
LS swap kit for 70s Camaro geni.us/VK090160
Steering box geni.us/800130
Steering column geni.us/SUM-771712R-NK
Steering wheel geni.us/SDK-S1MS-3600-WG
0:00 Coming up
2:12 Gas Monkey Headquarters
2:43 Flying Sparks Garage
4:21 Cracked windshield removal
9:19 New windshield install
15:09 Hood latch replacement
15:40 Door seals
19:10 Hot Rod Power Tour
22:52 Windshield wiper motor assembly
27:01 Last stop before home
Follow us:
debossgarage.com
/ debossgarage
/ project.black.jack
/ debossgarage
/ debossgarage
Send stuff to Filthy Rich
411 Darling Rd, Canfield, ON Canada N0A 1C0
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I use: www.amazon.com/shop/debossgarage
Show us your build project: debossgarage.com/nation
Help us make awesome stuff: debossgarage.com/membership
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
© Red Egg Entertainment | made in Canada
--
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.

[@DEBOSSGARAGE]

Happy Canada Day! 🇨🇦

[@KHALABEEB]

It would be great to see a video on the import process

[@jimgould2829]

Maple syrup wiskey shots for everyone 😀

[@AJNpa80]

Must be having a hell of a party, can see the smoke from here!

[@p.d.nickthielen6600]

Sorry missed you on power tour

[@bennyg6115]

Happy Independence Day!

[@pikehunter23750]

One little breakdown...a minor oil leak....after ALL of that driving across the whole country. That is a true testament to your mechanical abilities (and to the fellas and fellettes that helped out along the way).

[@peterjuhlke7437]

Windshields are the scariest part of a resto . Even helping the professionals was nerve racking ! The truck looks great . Nice to meet other cool car crazy people on this adventure .

[@wobblysauce]

Needs a sticker on the inside at lest

[@johngonzales2883]

Man I love this build up reminds me of my 56. It’s got me looking for another one . Car enthusiasts people seem to all ways go out their way to help each other out.

[@TotalGooseNipples]

The black z32 in the background was a beautiful example of a twin turbo. ❤❤

[@divadyrdnal]

Nothing screams fun than working under a dash on a wiper motor! You are my hero Rich…

[@BCCartman]

It would be great to see a video on the import process for those looking to do a similar project of building out a project US side then bringing it home.

[@jspaulding4106]

Yup, would love to see the border crossing video!

[@Doogle81]

Can't believe you were at Summit Racing - 5 minutes from where I work!! Awesome build and road trip! Happy Belated Canada Day!

[@abef.9085]

Had a "57" Sixer...Beast!

[@davidgleason6400]

Rich…. Awesome finish to a fantastic build! Nicely done…Love the content…keep it coming.

[@DEBOSSGARAGE]

Thank you

[@catherineoneill1420]

Fun to see Zack in there! When I saw his truck in the cover shot, I got in and subscribed to your channel. Sad about Zack's trans, it put a real kink in the overall fun of his trip. I was seeing your truck in his videos so glad to connect the dots. Brian

[@williamwagner170]

Happy Canada Day from pembroke Ontario

[@stewbird]

Would be cool to see you and Mike do a photo shoot and a cruise together. Two 55s rolling around would be pretty sweet to see

[@robfox5892]

Such an incredible road trip you guys put together! Ending it with power tour was perfect. When you pass through again, I'll 100% help ya out if you need it. ( which is like 133% Canadian, so pretty good 🤣 )

[@CarswithNash]

Glad to see the old Chevy is running nicely, that’s a good feeling, especially on a fresh build.👌👍

[@theglitch99]

New sub here, dig the diesel content!! When i was a kid it was legal to ride in the back of trucks still! 80's

[@mrmoss149]

Like I tell my sons, Rich - the more you do something, the better you get at it. Never thought of putting it on a resume, though.

[@Turbochargedtwelve]

All that work upfront meant the final journey was drama free. Really impressive!

[@p.d.nickthielen6600]

Had same issue with the flat glass on my 1950 Chevy pick up. Good job guys

[@richard3141592638]

What a great series. Wonder if I could take a bone stock 2015 Honda Odyssey on power tour. ...lol. Robbie Layton was at that Summit spot on his most recent build - nice area. Thanks rich et al. Hopefully you're safely home...

[@shuttlepilot_]

The music of this episode is just perfection. I love a road trip. Happy Canada Day from your southern neighbor.

[@hughmc5419]

Nice glass assistant, Rich . The Apache is coming together, great build.

[@Skusty]

Loved it, would be awesome to see you guys in Europe, Northern Europe even sometime, lots of cool hotrods up here.

[@punkinsgarageandpaint8299]

I love this truck! The Chevy design, your mods, your greats mods and the stance is perfect.

[@dennisdavis3564]

Great channel Boyz!!

[@andrewmonaghan8487]

Love the look of that pickup, very coooool , 👍🇭🇲

[@user-tj5nv9pk6f]

Happy Canada Day! . Happy Canada Day! .

[@carnage77]

Here we Go

[@tomcleghorn4005]

Nice work. Keep it up

[@michaelatkin9649]

Your channel has grown so much since you i started watching you now youre rubbing shoulders with the big guns. You make great shit man

[@codycopeland7527]

I'm waiting to see somebody rig up one of those ecoflow portable AC/heater units in the passenger seat. I'm sure they would give a free unit to any KZbinr with a decent following. Definitely would have to get a bit creative with how you hook up the duct to outside. Just a thought.

[@quadbilly2106]

Appreciate the content awsome work guys

[@r3dbeard]

If anyone saw that big antenna setup at Summit Racing and wonders, the owner is a ham radio operator and owns DX Engineering which is one of the biggest ham radio retailers. They have a cool display room inside Summit too. I’m only a couple hours away from there and also a ham/car guy.

[@KHALABEEB]

It would be great to see a video on the import process

[@DEBOSSGARAGE]

We made an in depth video on importing videos. We just learned though that you cannot import a homemade trailer (boat for us). They felt so bad for us they didn't even look over the trucks and sent us on our way

[@mattv4690]

@@DEBOSSGARAGE Yup. I imported some wave runners a few years back and they wanted documentation/serial number/title on the trailer and never even looked at the watercraft.

[@jspaulding4106]

​@@DEBOSSGARAGE so you couldn't bring the boat?

[@calholli]

It's funny how you're more inclined to hug in some garages, but not others. :)

[@shanethompson7543]

Badass Build!!! 👊👊👊

[@TokyoCraftsman]

I’ve been looking forward to this!

[@garyworokevich2524]

Have a sandwich and coffee on me Rich. A great series of vids on the Apache

[@DEBOSSGARAGE]

Thank you very much!

[@tomh6779]

Those are some spiffy shorts you got there rich! lol

[@davidjustice5805]

Great video

[@danmcelroy6584]

👍👍 Sweet!

[@kymw7833]

Very enviable trip Rich makes route 66 look like a Sunday drive I have a question where did the boat come from did you buy it cheap along the trip!!! Kym Adelaide

[@jonkline5519]

Rich love your projects I'm a Ford guy So juicebox and f3 kitty are sweet But I do like your old Chevy I've changed a windshield in my first car a 73 pinto saved from a junk yard in Ga In 1980 my dad really didn't show me what we were doing only had me do was pushing them the outside while he pulled the rope But years later I worked as a helper at my uncle's restoration shop Bought a 1986 ranger in 1989 plain Jane rubber floor mat Bought a factory sliding rear window From a junkyard came from an XLT tutone truck because of overspray on rubber seal gasket Cleaned it off with lacquer thinner Then greased around the seal with axel bearing grease Using the cotton 1/4 inch rope It took longer to get old flat window out than to put the slider in My uncle explained it with the help of his original 1957 Ford shop manual Showing how to put Windows in using that method including the grease

[@brendanmurphy1816]

Hey, the shop painted a boat on the back of the OBS !!

[@TaunusMicha]

can't wait for the border story

[@MichaelSmith-jv7zm]

Kind of odd that my LG phone does not have the 🇨🇦 in the Emojis, (had to copy and paste from you) my mother's side is all 🇨🇦. Absolutely love this truck in the other KZbinrs you've been collabing with. And you should do a giveaway with the windshield, sign it, have other guest KZbinrs sign it add some decals I think that would be awesome.

[@tomcocci]

Happy Canada day

[@MichaelSchneiderTexas]

Wow , driving across Texas in these 101F temps with no AC. Stay safe.

[@markwitkop7022]

Where you start there. In that showroom. I did not see a single car sporting a ("Patina") finish. With all dur respect to your skills as a vehicle creator. I love the F3Kitty. And your tractor & Trailer. I believe that "some" guys adopt that "Patina" credo, for no reason other than, they don't know how to finish a prject. Love your videos. They are fun, and helpful.

[@DEBOSSGARAGE]

Rawlings has done a lot of patina builds too. His showroom is one area of his compound

[@kevinerhart8461]

Happy Canada Day to you all in Canada

[@DOCTRJ]

Disconnect that battery in storage maan id be too worried to park it in there

[@kodykj2112]

Rich please take the battery out when you're changing the disks on the angle grinders. I'd hate to hear you hurt your hands. You kinda need your hands 🙏😬

[@darin8087]

Aloha with it being extremely Hot... Install a vintage air that would be a get touch to that truck.

[@markandkimmacadam2854]

Happy Canada Day

[@Shiftyspeedshop]

Clutch head screws, the robertson screws beefier cousin.

[@cl18]

Does anyone now if the blue color in the Apache is common cuz I got a 59 fleetside that all faded blue like that hood

[@yorkchris10]

I guess the original windshield kept the frame aligned. Flimsy by today's standards, but it really came together.

[@123suzukisamurai]

Easier to put the bottom in first then you can pull down directly towards the bottom.

[@leasttrending]

U can tell deboss is getting money rolling in now his videos are way different then before no more dirty hands and no more working on garbage his self

[@DEBOSSGARAGE]

Literally working on “garbage” all day yesterday. Sorry you missed the DGHD episode 3 days ago. People like different things I get it, doesn’t mean we’ve changed at all.

[@leasttrending]

@DEBOSSGARAGE sorry deboss I really do love ur videos cause u did unique things like Noone else I guess I don't know I'm just pissed I can't afford to do cool shit I just lost my job I'm down rn things just never go good for me bad luck always gets me and well life just sucks rn

[@leasttrending]

@DEBOSSGARAGE sorry deboss don't pay me no mind.

[@minnesotatomcat]

I can pull the door panels off a 92 riviera in about 4 minutes 🤣 funny how fast you get at things after enough times

[@adamformanack318]

Hey Happy 4TH Of July &Fuckin Right On, Cool people all the way around,...Good Show Idea Do More..😎💯✌

[@jasonkebic741]

riding in the back of a pick up truck is illegal in Ont. (Odd got caught doing it in Ottawa Ont.)was told it was legal if all seats and belts are occupied, but we had both seats of the s10 LUV filled in the cab . That being said that was early 90s, and in mid to late 90s a pickup doing the same rolled in Ottawa and some were killed. Either the cop was being nice to us or the law changed later.

[@landon390]

🔥🔥

[@geoffbrowning5933]

Columbia in the summer with no AC, us locals don’t even do that 🤣

[@heathergreylive]

When the heck did y'all get a boat??

[@adventureswithedna]

Every single piece of glass on Edna was broken on Edna when we bought her. Replaced all that plus all cab seals cause she unfortunately lives outside. Patina life.

[@MichaelSmith-jv7zm]

I just subbed, I'll check Edna out later. 💪

[@adventureswithedna]

@MichaelSmith-jv7zm hey thanks so much!!! We really appreciate you

[@PeterHatch-mx7zc]

👍😊

[@guido2110]

Dam you were 1 hour from me, good luck

[@jmyd83]

👍

[@1957kwick]

Why is the back window on the truck square?🤔

[@adrianspeeder]

@10:52 needed a Tape Boss.

[@Nairod2]

RUBBER SEALS AGAIN!!! Do you know how hard it is to get the lip seal of a rubber gasket to fit on a forward drum assembly in a tranny... so bad this video gave me PTSD.

[@MichaelSchneiderTexas]

But hows he going to keep a rustbucket from disintegrating in canada?

[@shanewright6958]

👍👍

[@user-tv5dt3nm9y]

Nice truck. New, spotless modern wheels on it make no sense to me.

[@Dagrond]

So that's where that comb went ...

[@shmackie]

Why did all the Dirt Cinema branding get removed?

[@grant2584]

I'm glad you didn't sell the Chevy 😂

[@schweeb9113]

3rd! 🎉

[@karenkartz3163]

It's so hard watching novices putting in glass.

[@jspaulding4106]

Any tips, Karen?

[@JacobYoces]

I am once again asking for you to give us the Silverado.

[@gavinmetcalfe140]

The man’s pretty busy. Give it a rest.

[@jamiemoen-bi3gd]

🇺🇲💯✌

[@noka55]

To me u do anything with gas monkey you’ve mad it in the car world

[@michellericard4850]

🤔🤔🤔 this is why I don't like "patina". Its just rust. Its worth it to spray it. Not rust in the eyes. At least spray the cab. That's where you sit for hours and hours.

[@workingcountry1776]

The Gas Monkey himself.....

[@farmerbill6855]

I want, no, need an Emily. Someone please clone her and send me one.

[@MichaelSmith-jv7zm]

Really dude, have some class

[@farmerbill6855]

What's wrong with wanting a woman like her? Kiss off.

[@northvegassailrabbit3642]

Sorry, not a fan of Gas Monkey.

[@jamiemoffatt50]

Can’t stand patina! Paint that thing!

[@DEBOSSGARAGE]

Never. Just finished painting the Bronco and Silverado. Along with the GTO and Kenworth, I have enough shinny paint to worry about