Built Ford Tough! F150 WILL NoT Die!!

[@Romas65]

I had a 1998 F150 extended cab with a 4.6 l engine. When I bought it, it had 4 miles on the odometer, straight from the factory. I replaced the motor at 350,000 miles on it, it's history was changing the oil when required, tune up kit, brake jobs, alignment, oil change the differential. The transmission never gave me any issues. When I retired in 2017, I wanted a newer truck as a gift to me, so I gave my beloved Ford truck to my brother in law, he needed it for his work. To this day, that truck is still running, no issues what's so ever.

[@hithereperson8137]

had one come in with 430k miles on it, factory everything as far as I know, it didn't run very well and desperately needed maintenance, but, it still drove in, probably replacement plugs

[@stephanparis6887]

The 10th gen and 11th gen are very different beasts. I own both and the '08 requires much more maintenance at higher costs. Still better than later years though.

[@zorander6]

When a kid hit my 03 Ranger with 220k on it I got an abused 03 F150 5.4* that had 240k on it. Only thing I had to do was the intake manifold and got it to 320k miles before it wouldn't pass state inspection. The 10th gens were great trucks (other than the plug blowout issue.) *Meant the 5.4 not the 5.0 which garnered some discussion.

[@craigroberson8757]

I had a company van that wished for the life yours has. The engine had an oil leak that rivaled the Exon Valdez. The engine is the original and transmission as well. I was hired when we took delivery of the van. We had one other van we purchased with that one. The 2nd van was totalled. The original van retired still running. The van was given to a good friend. He started his company fleet with that van.

[@hugh007]

My 4.2 V6 F150 is about to turn 270,000. Still uses no oil between changes. Just periodic fluid and oil changes. The driver's seat is shot, though.

[@waynej747]

Adam Savage from Mythbusters once said that the difference between science and screwing around is data. Since you had the scan tool connected, this was science!

[@clbcl5]

This is the season 2 premiere of "Florida man, Hold my beer" Starring ....Raining parts Man, I disassemble engines, Aaron potty mouth, what's in that beard Fordman, and Dave's not here man. The bachelor party edition.

[@Ugh_its_dat_guy86]

You know when I ask "should I be standing here" you probably shouldn't be standing there 😂. Such a fun video

[@kaafromoz]

The pure and simple joy shown when mates get together and say "HEY WHAT IF WE ........." I Loved it cant wait to see how it eventually ends guys thanks Ray and Co Keep Safe Keep Strong 🦘🦘🦘🦘❤❤

[@DenKonZenith]

I've been told by fairly reliable sources that the difference between "screwing around" and "science" is recording your methodologies and results. I see truly legitimate science.

[@joshuamerrill2422]

One of the best collaboration videos yet y'all two together are hilarious

[@mikep3509]

This is what happens when a bunch of master mechanics get together for fun. Only thing missing “DUDE, HOLD MY BEER. WATCH THIS”

[@Spanky8402]

That's why the video ended. 😆 🤣 😂

[@douglasphillips1203]

There was a reason Lauren was telling them to be safe! 😂

[@sfnnll1289]

That's how you can tell this is a scientific study. The lack of "Hold my beer" steps.

[@cuzzndoug5896]

glad to see that after all the strife you all have gone through in the last month. that good friends can come together and have some fun. 😎🤑🤣😂

[@bobbg9041]

I DON'T SEE RAYS WIFE'S CAR. NO ADULT SUPERVISION!

[@harrysetchell4632]

She saying don't get me involved and boy will be boys

[@donvantzelfde7828]

😂😂😂

[@Ghauster]

She was there near the start. I'd bet she left shaking her head at the boys with toys.

[@randallhoover2410]

Well now the wife unit knows what they are up to when she’s not at the shop! LOL

[@jamessowards3822]

She was there, I heard her speak earlier on the video.

[@AB-jk7tw]

No matter how bad a vehicles condition, it always seems a little sad to me to purposely destroy it.

[@sand0077]

I agree. I'm into preserving not destroying. 😒

[@freeform33]

I think this is revenge porn for all the skinned knuckles ,burned flangees and muscle burn you’ve endured 👍🤓🇬🇧

[@JohnSmith-xv3cs]

He's an idiot that's why

[@travis4798]

Engines got a knock and timing set is gone.

[@wesgregg6451]

Yes, but he's a f*cking moron who is playing to the crowd of like-minded viewers, so it's... still not okay.

[@jeffmassey4860]

"Let's get tacos and gas". 2 words that mean the same thing...

[@bblod4896]

@@jeffmassey4860 True. Great catch.

[@robertsturtevant6185]

But……he didn’t say gas from tacos..

[@bengtabelsson9727]

Note to self: mount tire first, fill with water after.

[@stevenakn1]

🤣🤣🤣

[@WayneSummey]

This is akin to my brother putting a nitrous oxide kit on a rod knocking 350 chevy. 😮 just to make blow up. He got two passes on a back road before the rod let go.

[@josephohara7407]

Water is how the old timers used to clean carbon build up off the combustion chamber and valves

[@bobbg9041]

I did it back in the 1970s just not with a water house. I had a friend who raced oval track dirt cars. He argued with me on water in the combustion chamber. At the time I drove a Plymouth feather duster, it had the slant 6 engine same body as the Duster I took off the air breather and poured in a glass of water Yes it slowed down the motor but it ran. Would i do it to a modern motor nope. But it does burn the carbon off the valves. Chemical methods are better IMO Plus they use a controlled fulid flow

[@patrickdiehl6813]

An ice cold Beer, Eric, BFT and Ray having fun Blowing up a well used F150. A Sunday afternoon couldn't get much better💯💯💯

[@RogerFleury-rh9wr]

267th! I have a white with gold trim 1996 F150 Eddie Bauer extended cab with a 5.0. It’s.a garage queen that looks as good as it did when new. It hauls things to the landfill a couple times a year. And driven all winter to work, before retirement. Originally was used to haul things back and forth between Pierre and Denver. Has about 97,000 miles on it. It’s never had food eaten in the cab, just water. So the upholstery is immaculate. Love that thing. They just keep going. Roger in Pierre South Dakota

[@ronhansen7717]

I think Ford ought to use this as a commercial for "Built Ford Tough", the extremes you guys put this through to try to kill it.

[@MichaelVermylen]

Boys having fun, the adult version.

[@richardkelly2047]

I had an F100, an 82 I think, with a 300 six. Drove from Charlotte NC to Miami and as I was getting on 95 I noticed a loud noise and turned down the radio. Stopped at the gas station and bought 2 qts of oil. Went back in and bought 2 more… went back in to get one more to top that baby off. No idea how long I drove that with no oil but I did drive it for another 2 years before selling it. As far as I know it’s still running 🤣 Ford tuff

[@matthewellisor5835]

That straight 6 is a beast! I sure miss my '93 f150 but it went to a good home for a fresh head gasket and, as far as I know, still going.

[@samholdsworth420]

When Ford made something reliable

[@timothyweers8054]

This is called occupational therapy. You guys do so much in repairing cars and so you need to blow off steam for purposely wrecking a vehicle. My aunt worked for years in a bank, when she got a game system, she purchased a cop and robbers game where she played as a Robber stealing from multiple banks without getting caught. It's priceless.

[@chrishengeveld6117]

Now Eric has an engine with catastrophic damage to tear down on his channel....lol

[@nissan300ztt]

Was thinking the same damn thing!

[@TremaineLea]

Anyone else wishing @RainmanRaysRepairs had hit those rotors with brake clean instead of water for a flame show?? 😂😂🤣🤣 23:13

[@Olk940]

Poor truck. Hurts watching this one.

[@LoganHester-1489]

IKr

[@MrUbiquitousTech]

Yeah, wasteful.

[@JohnSmith-xv3cs]

Exactly he's an idiot

[@cobalt86]

​@MrUbiquitousTech this unit is not worth the power it makes when it runs normally

[@MrUbiquitousTech]

@@cobalt86 lol, you're kidding right? This was a trition engine, not an ecoboost or vortec

[@SeanBZA]

Went from the Rosslyn assembly line, half way across the planet, to the point it met Ray and Eric.....

[@garyalford9394]

You are making me feel bad ! that is a better truck than anything I can afford in So. W. Mich. being old and retired, I am currently driving a 92 tercel with almost 200,000 that I rebuilt many years ago before I got old and broke.

[@kenkeyes8148]

I have learned SO MUCH from you...particularly patience and discipline. Thank you.

[@ianmcnaney6528]

Exxon is gonna be upset with you. They've been going to great lengths to suppress the fact that engines can actually run on water and leaves, instead of oil distillates.

[@stewartthompson7556]

I do love a Sunday upload from Ray 💙

[@handduggraverdronline]

definitely want a part two.

[@MichaelNomura-i9n]

I didn’t learn anything, but it was sure entertaining.

[@zorander6]

You learned what not to do so you still learned something.

[@richyoung9061]

1988 S10 Blazer 4x4 with a 2.8L and 327K on it. We beat that thing off of anything and everything. Roof cut off, doors ripped off by backing up past a telephone pole. Front end was stuck in 4x4 because we bashed it off of a concrete divider for hours on end. Oddly the next morning at the junk yard the loader guy gave me that "Well what can I grab" look and I reached in turned the key and it started straight up and began pulling on the straps. I yelled I can park it where every you wish Sir....Some are harder to kill!!!

[@ZSAZSS09]

That knocking must be the remaining horsepowers trying to flee the engine.

[@DragonRides75]

so great to see Eric on your channel love watching Eric channel too,to of the best you-tubers together amazing

[@ronsloan7662]

Hey Ray, I've been waiting for this. After that video where Eric did a cameo appearance I new something was up. You guys just don't disappoint, that video was awesome. I loved Lauren's comment about seeing the smiles on all of your faces. Hopefully you can nurse it back to health enough for a grand finale! Cheers!

[@jeffreylane7647]

Ray, good to see you were able to get together with your friends and have some fun and unwind after the though few weeks you and your family have been through. That was a very funny video there were parts that made me laugh out loud.

[@jeffreysnyder4994]

YOU OWE THAT TRUCK A MONSTER REBUILD,THAT POOR TRUCK EARNED IT

[@92mrsrdb]

😂

[@thesmallwoodlot433]

Need to rebuild this truck for a “live feed “ you tube give away! 😂😂😂

[@timmyt964]

This is the best video I have ever seen! I love you guys! SEND IT!

[@jdesaavedra0432]

Pretty cool to see collaboration with Eric. Sounds not-too-terrible. Classic I Do Cars.

[@douglasphillips1203]

I'm looking forward to the tear down on Eric's channel!

[@bblod4896]

During the 1970s gas crisis, you could buy a kit containing a water storage bottle, some hose and a nozzle. You mounted the nozzle down into the carburetor and drive the car with a mist of water being sucked in. It was supposed to increase your fuel mileage and help blow carbon out of your engine. Cool video. Thanks Ray and the guys.

[@howardrubin4916]

I had one of those mounted atop my Olds 394. It worked until I read in some magazine that it didn't,!

[@bblod4896]

@@howardrubin4916 😂🤣😂

[@wayneessar7489]

62 Pontiac had that bottle...!

[@Renville80]

There were some early farm tractors that ran on kerosene or distillate, and those engines had provision for water injection as well.

[@garyosborne8906]

This one was hard to give a thumbs up to. Destroying a Ford seems sacrilegious. On the other hand, it was kind of fun to watch. If you can’t purposely blow up a truck that is already in very bad condition in the time period allowed for a video, it is either one tough truck fighting for its life or you’re not really trying. I’m guessing one tough truck. Perhaps it deserves to survive and run the roads again.

[@Grantthetruthteller]

Years ago i had a 67 ford galaxie 500 with a 289 in it. Back in those days there were kits that enabled you to add Water Injection. I only used the injection in the summer, for obvious reasons, when i took road trips. I swear that the water injection added to my milage very noticeably. I was getting 27 to 30 mpg with the injection.

[@adthetrini868]

When close friends get together, this is what happens. We happy 😃 Men are simple creatures, I’m sure others enjoyed this as much as I had. 😂

[@nipperdawg1865]

Its missing hold my beer

[@gokartbuyer]

Got a ford 4.2l with over 530k miles on it. Original engine and 2nd transmission. 2004 heritage

[@MichaelNomura-i9n]

Poor truck just wants to go to truck heaven.

[@leebornaman5508]

Dang! Could feel the heat from that drum here in KC!

[@brettperkins4643]

And the Cat

[@squiggyg.8415]

“ Let’s go get tacos and gas” never has Ray spoken so much truth 😎 they went to an actual taco stand or else he would’ve said let’s go to get Taco Bell and toilet paper

[@nissan300ztt]

The in person collab I needed to see happen!

[@RebekahTOUCHEDBYYARN]

I have never watched someone demolish a truck. This is going to be so much fun to watch.

[@TheMhannah100]

I could not stop watching

[@richardmurray9204]

This has all the makings of a "Hold My Beer" episode. Just hoping no one gets killed trying this at home.

[@MrKillerno1]

Some dads build treehouses with their son, some do tea party's with their daughter, but no, Ray is gonna destroy a vehicle! Showing off on being a dad? Good science Ray!

[@TremaineLea]

When @RainmanRaysRepairs brought out the c-clamp and angry pliers, I immediately thought he could could shape the end of the screw down with a cut off wheel to get a socket it on it. Maximum torque!

[@jsh6952]

That clamp screw already has a hex end for turning. It's a ball joint press.

[@TremaineLea]

@@jsh6952 huh, I missed that. Good eye!

[@seagullsbtn]

Two of the most fun channels morph into one. Watch in full

[@blueoval402]

That Ute is a beast

[@Grayhook1]

Come on down to Ray’s and convert your old ford to run on tap water! Engine, transmission, even the tires!

[@GeneralSulla]

I love my '93 Ford F150 5.0 4x4 farm truck fully protected with steel undercarriage plates. It's the Chinesium parts available only that twist my wicket. 😂

[@joemuncie9187]

You guys are very entertaining. Great video.

[@joerossiter1611]

That's freaking crazy I'm waiting to see the whole rear end fly off

[@kenengelbrecht9872]

Wife unit let her oldest child out to play with his friends and rain down destruction on one of their toys. I'm sure she made them clean up before they all went home.

[@chatrkat]

I like all those guys and sub all their channels. It’s great to see you all together as friends collaborating on a video. As a lifetime Ferd truck owner it’s hard to see one in this sad state. But when it’s a hopeless case, make a video to send it away with zillions of views. 👍 guys!

[@BeardedFordTech]

❤

[@chatrkat]

@@BeardedFordTech I’m a big fan of your channel too. 👍

[@BeardedFordTech]

@@chatrkat and I'm a big fan of you being a big fan 💯 hope to shake your hand one day

[@chatrkat]

@@BeardedFordTech thank you sir. I’ll drive my garage kept, stock ‘00 F250 4WD Powerstroke with 67k miles that never sees snow 😁.

[@cadesmith4278]

I felt a little dirty enjoying watching this.

[@kevincurry4735]

Eric, Anthony, ARod and Ray in the video together. This could get interesting. Doing the most unsafe action the safest way you can. 😄

[@douglasphillips1203]

That was a fun watch. And amazingly impressive to see how much of a beating that truck took before it finally gave up.

[@weirdwillie]

Im ready for part 2 .

[@dylanfileccia1310]

Old cletus would be proud! Project neighbors 4.6 blew up with nitrous but I hope Eric does a teardown on this engine after! He has yet to do a 2V 4.6 on his channel

[@JW-xn9fj]

We did this to a police order recovered cut and shut several years ago. It was ruled nothing on the car could to be redeployed so fun was had in the yard before the car was delivered to the local fire station for them to practice cutting it to pieces!

[@tylerbeach4727]

My boss has a 2006 f150 fleet spec truck with the 4.6 modular v8. He lost oil pressure in navada towing a 20 foot trailer on his way from southern Cali to Maine. The motor knocked like hell but the truck still got him to Maine, and around town for a week waiting on the new engine. Believe the truck had about 250,000 miles when I pulled that motor, still ran strong just had lower end noise.

[@kylebeach2316]

My dad's old ford truck with the 5.4 made it down too Georgia and back too new york towing a car hauler and bad cam phasers. They finally let go a week later and truck never ran right after attempting too fix them. Sold the truck for basically scrap value and bought a 2014 f150 with the 5.0

[@Wheelsaturnin]

You're destroying a perfectly good butter churn.😀

[@bengt-ericdahl3322]

This was Really Fun 😂😂😂🚗🚗🚗

[@MistrX44444]

You two should make a road trip movie.

[@LabCat]

Office Space: Mechanic Edition. Love it.

[@Obsidian-One]

Awesome Sunday surprise!

[@bullbutter9699]

I have a 93 F150 Farm Truck that goes to the Dump 100 mile round trip 10 x a year with over 700k miles ... 3psi Hot old Pressure Idle 20psi max....... 4.9 six . Runs great .

[@johnsherwin3007]

Hilariously funny. I only wish I could have been there in person. I've always wanted to do something like that.

[@92mrsrdb]

My brothers did crazy sh!t like this as younger men. When I met my husband he participated in shenanigans too. Great times! Brother and I are in our 60's and my husband passed 6 years ago. Great, hilarious memories...I was laughing and shaking my head all through this vid. Hi to Bearded FT, Eric and A Rod. Hope to see part two, The Final Chapter.

[@Groot564]

254mph F150 😂😂😂😂last time I take my truck there. It was running like new!!!!!❤

[@demmarcsxr]

Eric is going to find Uncle Rodney when he breaks this down most likely. Looking forward to it.

[@fleece192]

Guys that awsomly ridiculous. Big kids play to.

[@stuglenn1112]

11:16 the worlds most powerful weed whacker comes into exsistance.

[@jimchambers6061]

You guys are idiots, I love it. It's such a cathartic experience to destroy something you work on and treat gently everyday. Having the opportunity to make something fail instead of fixing it is something most people rarely get to experience.

[@billclements3879]

Hi Eric, ray and family 😊😊

[@gregharrison5737]

All of you are nuts, I love it. Best video yet.

[@notbanksy8294]

I just sold a '96 f150. It was sitting outside for 3 years, jump started and it drove right off lol. (I know, cool story bro)

[@williamduhamel7726]

Instead of blowing up an engine you should have gotten some of those “Snake oil” remedies that they sell on informationals and test them. Ex. There’s a new one in a syringe that’s supposed to rebuild an engine. Or how about emptying all of the oil and just fill with a bunch of them. Taco’s and Gas. Sounds like a new restaurant idea.

[@108gk]

The Garage 54 channel has done something similar to that. They have great imagination when it comes to destroying cars..

[@brandonstclair6530]

One called engine restore works in some cases. I had an old beat up Dodge ram with the 3.7 I wanna say v6 in it. It smoked horribly when cold but ran great otherwise. I put a can of engine restore in it and the smoking went away. Another time I had an old bunker rake that the engine was smoking when cold. So I added half a can of engine restore and it quit smoking.

[@raymondvosmeier5155]

I live in Indiana and a lot of farms fill there tires with a liquid also, beet juice, it helps traction, biodegradable, freezes at -35°, but than again it's in a tractor not something doing 70 mph down the highway.

[@RobHughes-oh3yg]

That was great!!!!😂

[@johnellis9147]

I love a good instructional video I a Whistling Diesel style. A good video of what not to do

[@gulliver3644]

The blind leading the blind! Hilarious!!!

[@jynxclover2996]

Omg that os so gnarly @around 27min mark. Holy

[@demonorb8634]

Shenanigans! Sounds fun 😁👍

[@DocBain1]

Those water hose adapters are great. It definitely helps my Kubota tractor have good traction.

[@williamsquires3070]

Ho about a mix-up? Put the engine coolant in the transmission, put the transmission fluid in the power steering pump, and put the gas in the oil fill hole. Yeah. 😮

[@jsh6952]

Ford power steering pumps use transmission fluid.

[@williamsquires3070]

@@jsh6952 well, there, you see? We have a place to put the transmission fluid before we do a fluid transfer from the engine coolant overflow tank. Once that’s done, we can take the transmission fluid out of the power steering pump and put it in the master brake cylinder reservoir! 🤣 Or maybe just put it back in the windshield wiper fluid. Either way. 🙂

[@kenore4003]

Can be like the moron do it myselfer.😂😂😂😂😂😂

[@Bearded-Logic]

MORE SHENNANIGANS AND COLLABS LIKE THIS!🤣😂

[@QuantumStellar]

The All Star Garage!

[@MikeY77z28]

That was a fun video.I loved it when the axle started hoping

[@thepubliceye]

I find it strange that when some not all, KZbinrs visit other channels they look different than when they are on their own channel.

[@rickretro9693]

LOVE IT! We need more of this!

[@williamsquires3070]

What we have here is a Furd-powered weed whacker!! Brilliant!

[@campy9712]

Too much fun! Thanks for another great video.

[@infinity3jif]

I've owned several vehicles with the Ford Modular v8, and they won't die without a fight. This thing took a lot of water.

[@squiggyg.8415]

Reeeee 0:01-0:15 you’re turning the key all wrong 😎