Built-in bed over bulkhead build Pt2 - Gluing the side frame together & making the four small doors

This is a slightly raised built-in bed that is going over a bulkhead in the bedroom created by the staircase below. The main bed structure is built-in using pine & the bed side frame is made with Beech, sprayed with PU lacquer using a Devilbiss FLG5 spraygun & Bostitch 50L compressor. There's four doors in the side frame hung on cabinet door hinges for access to storage space under the bed, a raised platform/top at the bottom of the bed for lamps etc. The shelf unit that goes at the head of the bed, I used a Makita cordless plunge saw with a TSO PRODUCTS GSR-16 PE V2 Parallel Edge Guide Rail Adaptor that cuts the boards square, I then used a Dewalt biscuit jointer to join the boards.
Pls donate to my channel if you have gained/learnt anything, PayPal has a debit card option
www.paypal.com...
I don't make these videos to make money or out of vanity, I make them to share the tips I've learnt over 40yrs as a joiner, but filming, editing, exporting, reviewing & uploading does take a lot of time, so if you have gained/learnt anything from any of my videos & would like to thank me or help me out you can show your appreciation by donating & pls clicking the PayPal link below, it has a card details option if you don't have a PayPal account, every little helps & will be much appreciated. Thankyou.
All videos
• Playlist
Staircase bullnose repair Pt1
• Staircase bullnose rep...
Spraying the mantle shelf
• Spraying the mantle sh...
Spraying both sides of a plank in one session
• Spraying both sides of...
Wardrobe build pt1 - Cutting the plywood carcass & no10 biscuits
• Wardrobe build pt1 - C...
Alcove cupboards pt1 - Making the doors & front frame
• Alcove cupboards Build...
Cutting keyhole slots for a mantle piece with a router
• Cutting keyhole slots ...
How to fit hollow wall anchors with a Fischer Setting Tool
• How to fit hollow wall...
Building a Summerhouse/Deck Base Frame
• Building a Summerhouse...
Making doors with a Festool Domino DF700
• Making Shaker Style Ca...
Cyclone dust shavings collector quick & simple, without Thien baffle
• Cyclone dust shavings ...
Sandaper, What do i use & a little tip for using it
• Sandpaper, What do i u...
Spraying Paint, How much Will One 500ml Cupful Cover
• Spraying Paint, How mu...
Cutting keyhole slots for a mantle piece with a router
• Cutting keyhole slots ...

[@grahamparsons6620]

Things coming on nicely, looks like another great series 👌👌👌👍👍👍🇦🇺

[@Gidjoiner]

Thanks 👍 I'll have more of these from 2022 to come, there's a vid or two of the bookcase that goes at the head of the bed, I uploaded the spraying vid a bit prematurely, that has the bookcase getting sprayed in it but I don't think that'll matter in the long run, Soo many clips & nearly 2yrs ago I'm having to watch every one to try n remember wtf I did 😂🤷‍♂️😂 . just went through the folders, there's still about 400 clips to edit 😵

[@Pete.Ty1]

👍👍👍Once again, Thanks Gid

[@Gidjoiner]

Thankyou, much appreciated, & you're more than welcome, I should have the final vid or two of this up by next wk'end & there'll be few more to come from 2022, then we'll have to see how this yrs pans out but I can't stop working & I'll keep filming 👍👍

[@michaelplays2449]

Beutiful work Gid !!! A pleasure to watch !!

[@Gidjoiner]

Thankyou, much appreciated 👍😊

[@paulgreene421]

Nice one gid looking forward to seeing the finished job. Hope your keeping well 😊

[@Gidjoiner]

Thanks, yep not too bad, getting a bit better each day 👍 I've been editing them this wk trying to decide what to leave out, in the end I decided to leave most of it in, couldn't bring myself to just cut steps out. I'll get the rest edited & uploaded next wk, prob another 4 or more vids 🤷‍♂️😂

[@brianlochrie3958]

The quality we expect avery time. Excellent Gid. Great vids. Cheers

[@Gidjoiner]

Thankyou much appreciated, glad you like it & you're welcome 👍😊

[@Bennetts74]

Good to have you back missed your videos

[@Gidjoiner]

Thankyou, much appreciated 👍 I'll have more of these from 2022 to come, I'm not quite back at it yet but feeling a lot better than last yr so we'll see how the rest of this yr goes, I'm not stopping working tho so I'll keep on filming & things should pick back up in time 😊

[@garvielloken3929]

Nooice!

[@Gidjoiner]

Thanks👍