HOW TO MAKE BUGGY from PUBG. Part 8. New transmission

Hi, everyone! In this video I will remake transmission for a more serious and reliable one with normal standard clutch.

[@waleadabuawah2575]

You are a clear man, and that touches you in the transparency with which you explain, your excellent photography, and your taking of the detailed explanation .. Oh man, you are a prince and your safety

[@baladar1353]

That runout of the flywheel... geeeeez man, that will eat the motormounts quickly. And your joints too.

[@detroitredneckdetroitredne6674]

Great video brother I am a new subscriber I cannot wait to put your clutch into practice Thank you for sharing hello from Detroit Michigan USA

[@FordMustangGTRocks]

This is so awesome!!!! Best buggy videos on youtube! I send my respect to you from Texas as a fellow mechanic. God bless you good sir!

[@scootersonlyrepair6773]

#thereisnogod stupid

[@kabamm900000]

Wow this it the first time ive seen anyone else make the clutch the same way i did cut the old flange and attach the flywheel to it . Nice job

[@celesdocofficial7816]

Thank you for sharing this idea. The making a buggy. I love it.

[@madmole56]

This is the most mad max fabrication I've ever witnessed

[@blakethompson8022]

using what you have is part of the appeal of projects like these. well done.

[@DS-mm6fh]

Totally agree, armchair warriors would nvr understand !

[@boasnovasonline8764]

Wow what a wonderful job it was great show you are a very smart guy Congratulations maybe you are a mechanical engineer very well thought out your project

[@Tinman97301]

Run what you brung man. Good job👍

[@napoliinchavero680]

Saludos amigo m gusta tu video espero que subas más

[@melissasmess2773]

Not sure how long the engine crankshaft bearings will last but great job figuring how to mate the two together!

fantastic idea with this gearbox

[@davidfox5827]

Awesome! ..you need tree bars and more triangles in your frame

[@johnkoury1116]

Thank you for this video. I am building a 1928 Morgan RIP special race car and I am using a modified ONAN/Tiger Moth opposed twin and an MGB transmission along with an MGB rear differential with those beautiful wire wheels. I will video what I can. the inks again.

[@jasongilliland9508]

That shifter linkage is great. I've considered making a buggy like this, but I have no lathe, and no welder. But I just got my new shed in a box, I will put a secondary roof over it for protection from the weather, after that it's all projects all the time. Can't wait to make stuff just like you do. Nice work.👍💩

[@bonapartethegreat4323]

NICE JOB SIR .....

[@natesyring8981]

Glad I found this channel!

[@blasebermea3493]

Bro like how it's made but so much better haha

[@melvinmariott8609]

Yeah me too. Im trying to build me a track vehicle for my post driver an i think this idea is what im looking for.

[@Elmuzaki]

Amazing full, it is very good

[@hassaneelhaloui9021]

Jaime bien vôtre vidéo Mercie

[@andreas8593]

One day i will build this buggy too. PS: Love your videos

[@watahyahknow]

one thing you needed to think about : the clutchpressure plate when declutched wants to push itself intoo the crank of the engine damaging it you need to put a trustbearing between them

[@JMartinhomestead]

The thrust would be taken by the "air handler" or flange bearing, whatever you want to call it.

[@knifethrower9733]

It's gonna be pretty gutless anyway 😂

[@hermanaje7401]

Awesome projects

[@benruether8294]

1:02 What cutoff wheels do you use? They cut through that crankshaft like a knife through butter.

[@olabodeolubusayo6019]

Good job... bro but we need to hit this on the road.

[@gibsonsihaloho7690]

Nice work bro. I like it I have question Do you think the machine that you use strong enough for real car?? How strong your machine is?? Thanks keep working ..

[@eatingshow7529]

Nice work

[@ianleemandriza585]

Nice sir👍👍👍

[@loganutterback4952]

This man is the king of cobblers

[@MechanicForGMCCars]

great video its nice to see peopel being creative

[@propermods2849]

Nice project!

[@Mattndew676]

cool video, but did you see how much metal shavings were left on the CV shaft?

[@oldschoolaffen-666]

Hi there actually not bad but isn't it easier to turn the differential and install the engine to the rear?

[@marvinblogs6747]

Very creative i love this video

[@lhawoekcreator]

Good jobs. Perfeck

[@AngelGarage]

Good job

[@wendellcalandingan7659]

Great idea dude

[@chadliggett286]

Brother, Awesome video! What engine 22hp? If you went with chromoly flywheel free up some rotation Mass! Should of Tig weld the half shafts and turn them down so they are balanced! Or you will be replacing bearings again! Best Regards!

[@ucheemodi4019]

Nice video i love the style

[@thiloschieschke9766]

Very well done! But I had lightened the flywheel as much as possible. and it would have had to be closer to the engine. "leverage". With the translation you can now only drive in 1&2 gear?!? Or?

[@mohammedyakoubi1027]

Good job,and nice edeas

[@rahmatmetaldetektorpalopo]

Amazing👍

[@offgridmangogrower]

Question about the build Anti vibration engine blocks…?…..who makes them….and what was their original purpose…?

[@pkm127]

Коробка передач от москвича, кулиса от жигулей... Штирлиц еще никогда не был так близок к провалу)))

[@user-kv5qe9qu4e]

Хоть ктото заметил руские запчасти

[@ChengDIY]

Cool vids . Keep it up

[@Enders]

Very cool!

[@wolfvierbergen1417]

when will you do the test?

[@user-hg3nv6em7w]

Смотрел как американцы строят багги, а попался наш родной канал😊 лайк поставлю обязательно

[@user-lr7il9qy6b]

Интересно перевод заказывал он или ролик продал?

[@user-lr7il9qy6b]

Извиняюсь. Зашёл на канал а там полный дубляж канала

[@buddhasflute9795]

have you tried making a dozer or some heavy machines?

[@romeoartizo3879]

I had been done that kind of assembling from transmission to engine.

[@Treylopez1997]

Gotta love English lol I could imagine learning it from another language. I'm mean you can have the Right to go Right and you may be Right but you may also go Right off a cliff. Gotta love it lol I commend anyone who is learning it

[@shanepowers7566]

The dismantling market.

[@Crozzzbonez0]

English sounds like when me and my friends were in elementary school and tried to make up a language but we were really just making shit up. “Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo” Is a grammatically correct sentence in English. English is my only language and I’m still learning new things. Anyone who has the patience and intelligence to even learn broken English should be respected.

[@luisbellidoprado297]

Un carro willys Jeep petrolero diesel petrolero

[@doroteogarinjr.1173]

0

[@riedewaanvanschalkwyk]

HBO 9b

[@mikemuzzell5167]

I didn’t know these were dubbed. Finally! I found this vid and I going to rewatch the series. In English.

[@matthewrinehart2367]

Really, these were dubbed? I had no Idea! The narrator's speech seemed so natural!

[@redneckasmr-xd1gg]

the only issue i see is the efficiency will be worse, but it will last all the clutch dumps u can give it with that little engine haha.

[@Sodaexe]

lathe work at it finest xD

[@cyberthug62]

If the flywheel is weighted won't that change the balancing of the motor and cause bottom end problems.

[@ignaciomacias6915]

Se puede armar un buggy con una plataforma de VW , motor ,transmisión y suspensión sin tanto problema.

[@naturalbirdsid5869]

Nice

[@pkf4124]

Looking good, might be worth getting the flywheel lightened, the smaller motor wont need the extra weight that the car engine did.

[@foolwithatool2052]

Actually the extra flywheel weight should help keep it from stalling. The heavier flywheel keeps its momentum when you engage the clutch so its not fully relying on engine power.

[@scootersonlyrepair6773]

If they aren't using the electric start from the car the ring gear is a couple pounds alone

[@shantiwilson4456]

I like the conversion a 1993 Chevy geo metro transmission could work as well

[@guitaristangmechaniko9336]

So innovative.... Interesting idea... Good job....

[@richardbutterworth7873]

Way cool. Now you need a turbocharged predator engine

[@johnwyman6331]

The Hemi predator of course.

[@tratorcaseiromacuco]

Parabéns Belo trabalho ❤

[@robertbarnett6879]

Its like someone wrining an essay and replacing half of the words with synonyms they don't under stand to try to get a better grade.

[@danielmiller2886]

Funny how such small details are dead giveaways for someone whose first language is not English.

[@AbrahamkpovocPembertonMascaroc]

¡Gracias!

[@DS-mm6fh]

I love it ?!! Screw the armchair haters , I hate nothing more then to see what looks like a cool diy build n start watching only to find out their using a 150000 $ lathe to build their so called diy projects.... Good work n something anyone could also do with limited tooling !!

[@DS-mm6fh]

@@Pawex55 my statement was applying to these types of videos in general ' I think u'd be hard pressed to find a decent metal lathe and a milling machine capable of doing a lot of these type projects for 1500 $ if you know of some by all means plz provide the links ' also some of us may only have a limited amount of space to do our diy projects I think the jist of my comment may have eluded you.....

[@DS-mm6fh]

@@Pawex55lol , yea I hear ya but u can still build some cool stuff but ya need to keep it simple I suppose

[@cornpop7805]

When polishing a shaft with emery cloth, use very light oil, I use WD40.

[@Bennyboysgarage_]

Let’s see the buggy drive!!!!

[@bennethpalaganas6923]

Dude your lathe is vibrating everywhere

[@blasebermea3493]

Haha fr I like the kind of people that make things work to the very end though haha

[@stanleybowman4464]

Yes, that is the first thing I noticed.!!

[@claudioroberto4345]

To acompanhando este tutorial seu ficou bom mas quantos CV tem este motor estacionário

[@theRVisme]

Dude really had a hoist for a 50lb engine lmao

[@joshuaphillips1867]

you didn't think about the thrust pressure every time the clutch is engaged or disengaged. look at vw cases, pounded out......

[@joedoe2442]

and you could have added the starter and battery from the car

[@mukamadyahya2579]

Ide bagus brrooo supcrip 👍👍

[@brahimtaam5273]

Bravo

[@chrishenniker5944]

I like seeing people who master their craft, like Le Dan does. You’re possibly one of the masters in the making, but I think you could do with some help writing scripts for your narration.

[@joaodomingosboff603]

Mas vamos admitir que é um mestre no improviso e na gambiarra... !

[@user-sp3fr3si3y]

شكرا لك عمل جيد ولاكن نسيت تركب بادئ التشغيل السلف؟ او ممكن يكون السلف راكب على نفس المتور؟ شكرا لك🌺👍

[@miha_kauric5508]

I know maybe its late but can you say witch transmission did you use thank you if you remeber im asking because i would like to try and make one buggy myself im only 16 and i would like to learn and build thanks once more if you remember

[@Ronibumenchannel]

Terima kasih atas tutornya sobat

[@81brassglass79]

Holy FART! Ya sure that shit is centered my guy? 2:17. Yikes lucky that bit did not shatter bruh.

[@prevost8686]

Back when Skynet rode the short bus...

[@Turbosuchtde]

Hi what you are use for are gearbobox???thanks

[@kennethhurlbutt802]

Sounds like charley from always sunny in Philadelphia

[@dennismenace5174]

Thanks for the video Can a 6 mm adaptor sheet be used?

[@swiji7198]

Yea

[@swiji7198]

Its just what ur motor attachs to but you might need longer bolts tho

[@IndiansAuto]

Vibrations from every angle.

[@Miniscapes515]

There is no way those calipers are reading true.. those machining skills though. Lol

[@crazysmile1428]

Откуда у тебя редуктор от советского муравья (трёх колёсный грузовой мотоцикл), их в странах СНГ сейчас трудно найти. Почему маховик не пророчил?

[@curtisrichards8369]

Kudo's to the Camera Man! It was as if I were hands on. All the important shots of pivot points angles and the broken bit shot twice as if I broke it myself.

[@ariboon8629]

Es bueno el concepto de adaptación, pero recomiendo que se hagan ajustes a la proporción de peso en la volanta de ambrague , dado que el motor es de menor rango para dicho propósito

[@josemedellin8597]

Así es 👍 por ejemplo ponerle una transmisión de una motocicleta de 750cc

[@11green11]

You've gotta have BALLS to build! 💪 😎👍

[@2fast2kart]

How the hell did you mount the transmission to a small engine like that?? I need this!!

[@2pist]

I want to know how you were able to drill the keyway slot without the bit bending into the existing hole?

[@MsAdamwill]

00

[@johncartelli]

wait you have a lathe but bought a crankshaft to get the end?...why not just make the end on the lathe? those axles will be way off balance...to align two shafts you can either lay them both in the "V" if a pc of angle iron then clamp them and weld or a better way is to slide both shafts into a pc of snug tubing. the tubing has an opening where the two shafts meet so you can weld them together...then you weld the tubing ends to the shafts.

[@witosarlaw]

Mantap bang.. saya juga lagi bikin mini buggy. 😊😊

[@dalefrost5146]

How much do u charge to layth a crankshaft end

[@diditutomo4729]

What Drive shaft is balance???

[@sazonow86]

Ещё до появления в кадре Жигулёвской переключалки почуял нашего Кулибина.

[@user-rp8xi5hd4j]

Меня сходу КПП 2141 смутила) и другие з/ч советские)))

[@saulcabrera573]

Also you can use a Subaru Impreza AWD transmission

[@staufferaustin8407]

So basically I could use my side shaft diesel engine with a Subaru AWD trans?

[@RainbowSheep_was_taken]

Is this a good engine? i thought that this engine was be designed by honda.

[@claudioroberto4345]

Amigo boa noite Posso te fazer uma pergunta e nescessário colocar esse mancal de rolamento entre o motor estacionário e vejo q vc fez o adaptador pro eixo 3/4 não seria o suficiente não ou precisa do mancal com rolamento

[@_-5932]

Рычаг скоростей от Жигулей 🤣

[@user-qj7yk4hw5k]

И реверс редактор от мотороллера ,, муравья"" --- русского!!!!!!