Buying and Testing the Cheapest Olympic Barbell HIGHLY Rated on Amazon

[@GlucksGym]

Got a favorite budget bar? Let us know and maybe we can check it out!

[@thecookiechannel7083]

Recently got Rogue Ohio plain steel bar which was under $300. Love it!

[@GlucksGym]

@@thecookiechannel7083 any OPB is great! I've got some bare steal and if you take care of it they're great bars

[@actionjackson9121]

@@GlucksGym I just got a BONEYARD rogue C70s bar for my small bedroom gym. Cerakote for 195. I love that bar and it can hold 500lbs with calibrated plates

[@Mark-sn6kh]

I like my bells of steel bare naked power bar for the price. Kind of want to try the blemished cowboy bar from elite fts.

[@GlucksGym]

@@actionjackson9121 can't argue with those boneyard bars!

[@BasementBrandon]

Selling my stainless bars for this immediately.

[@GlucksGym]

As you should, silver is the next big finish.

[@JagdishFarshanJanta]

@@GlucksGym love this content

[@GlucksGym]

Thank you!

[@carps_gym]

Hex bolts = Horrible

[@carps_gym]

It’s has the “upgraded sliver sort of “ finish

[@fencingrocks3]

This was hilarious, but I'm a bit disappointed you didn't do some heavy rack pulls to see how quickly it would bend haha!

[@GlucksGym]

That would've been a good idea but I filmed most of this after back day so I was pretty fried

[@Rakkhun369]

Doing rack pulls with this bar is funny. I pulled 575 on it once and it was sagging so much it didn’t flex any more when pulling the slack out. Getting a real Deadlift bar was so nice after using this bar.

[@thecookiechannel7083]

I had this bar. It is ok for a beginner. I used it for several years but had to tighten and repair sleeves regularly. Once I deadlifted above 350 lbs it did bend. But for a teenager who may not stick with it, is a decent bar for the low price.

[@professored7169]

My titan bar was $20 dollars more, rated to hold 1000lbs, has bronze bushings that spin, and has good knurling

[@GlucksGym]

It does work but the idea (and maybe it wasn't executed well) is that there's better bars out there for the same price which are shown towards the end

[@LukesGarageGym]

I actually bought the 100 dollar Titan bar. Been great! I don’t really powerlift, so I have no need for a fancy bar

[@GlucksGym]

Oh come on Luke come visit and I'll show you the addiction

[@LukesGarageGym]

@@GlucksGym you got it all😂

[@GlucksGym]

Not quite... But I'm trying haha

[@dirtsmiles8098]

It’s funny how everyone views the products they get. I have a 35 yr old no name bar, it’s been abused but works. We got one of the titan economy bars. I really like it. It is a huge step up from what I was using.

[@jsedge2473]

I agree the Titan one is fine. It feels 0 different than any bar I've used in a public gym, I go over 400lbs on it multiple times a week with no issue, and it was like... 100 bucks shipped. I will have to try a more expensive bar eventually though, since everybody seems to swear there is a difference.

[@brycemartz4921]

This my favorite review video to date. Not just this channel, every review video.

[@GlucksGym]

That's a pretty big compliment!

[@brycemartz4921]

@@GlucksGym I've been saying for months now that Coop has some serious competition.

[@GlucksGym]

😁 Thank you!

[@teamrogers1047]

“The Beast” from Cap was my first Barbell and I was actually very impressed with it. I would be deadlifting 400+ and even heavier rack pulls with no issues.

[@GlucksGym]

I've personally found it to be a good bar for the price. There are a ton more options now than a few years ago but it still stands up pretty well.

[@nicolasarias6000]

A new wheelchair ramp after you try maxing out this bar😂

[@GlucksGym]

😁🤣 Some videos write themselves

[@xinsanedefeatx]

FYI for anyone shopping around now, Rogue has boneyard bars in stock atm, seeing 28, 28.5, and 29mm

[@mariomolnar3184]

Was not expecting the humor. Top notch review😂

[@GlucksGym]

This one turned out pretty good. Thank you,

[@rodrigosanroman5858]

I am so addicted to the home gym community. I am watching this video even though I own the rogue Ohio power bar Aggro edition that is in full stainless steel, and not one but two beater bars. Yet, here I am watching a video on a bar I have zero intention of buying and never will.

[@GlucksGym]

Well if you came to be entertained hopefully you weren't disappointed 😁

[@roundup1253]

Just recently subbed this channel. Like it very much, great style of presentation, funny and pleasant watching. Keep it, you will make 100 k subs in a year. The bench carrying videos of your wife are really nice, as you said you can bring it every time 😀

[@GlucksGym]

Haha thanks. Glad I've converted you after that terrible OHP form. I promise it's not normally that bad 😂

[@ironhallgym]

Why am I addicted to this channel? Awesome job on your videos!

[@GlucksGym]

There's worse things out there though 😊 thanks!

[@ironhallgym]

@@GlucksGym comedy mixed with honesty, your channel is gold! Can’t wait for the next video.

[@jamestonbellajo]

Loved this review and the timing is perfect. I just talked my friend out of a bar like this yesterday and found out that XMark is running a 20% off sale for the holidays. Their cheapest bar with snap rings (Blacksmith Bar) will run you around $137 after the discount. There’s no shipping and tax so it would only be a little more than the Titan Economy Bar with better specs.

[@GlucksGym]

Yeah that's another decent one I almmmmmost put in the video. On sale it's even harder to resist.

[@MikeV3-h2h]

This is comedy gold

[@GlucksGym]

Hahaha thanks! Glad someone sees it 😇

[@DaskaiserreichNet78]

5:45 I'm sorry to hear that your shaft is below 30mm. I'm just joking of course. You do have to admit it sounds pretty funny dough.

[@GlucksGym]

😇 That's the idea haha

[@DesignBuildLift]

Awesome video, Gluck!!!

[@GlucksGym]

Thank you! Was hoping it would come out well

[@thanatology493]

I bought the Yaheetech squat stands during the first lockdown. Three months later they dieded, so I just found some scrap wood and built my own. They're still holding strong.

[@GlucksGym]

Scrap wood > Yaheetech?!

[@thanatology493]

@@GlucksGym Yes... :D

[@wizcorn9958]

I can’t believe they dieded three months later🤯

[@KaizenDIYGym]

Hilarious! Good work Gluck!

[@GlucksGym]

Thanks Kyle

[@henrymmaung]

in the beginning it sounded like cha-ching from all the money your racking!

[@GlucksGym]

Hahaha yeah I'm rolling in it over here hence this high priced review 🤣

[@craterflakes]

"Moves and rattles more than a girl from the 90's..." lol. Maybe your best joke yet! Great video idea, informative and entertaining. Thanks GG

[@GlucksGym]

I was a fan of that one myself but I'm a bit biased 😇 thanks!

[@johannduplessis3467]

I always laugh at your sarcasm🤣🤣🤣🤣

[@GlucksGym]

Thanks. I know not everyone likes the personality so it's nice to hear 😇

[@David-hy7rn]

Inspire fitness actually has a decent budget bar they package in a 300lb bumper plate and bar package. Package is usually $500, though, I bought one on sale for $400 as my first set. By itself, the bar is $125. It's not the strongest as it's rated for 700lbs at 72000psi, but everything fits well and spins smooth and quiet. I see initial very slight bend in the bar when you get above about 185lbs total weight. Still very little bend when you cross 250. They also have a rack that I found to be a hell of a deal when I got it on sale for $650. It's 11gauge 3"x3" uprights with key accessories included (landmine, nice J cups, helper arms, dip attachments, etc).

[@FlatTruther]

I recognize that flag on your wall from a review on Amazon for metallic spray paint. 😂

[@TheMonk111]

man it is funny as hell how they present 2 different specs in two different places (several times) and the actual measurement is NEITHER of those numbers

[@GlucksGym]

If you put enough numbers you'll eventually get some right!

[@chairmanwumao1768]

The pattern on the sleeves are there so the plates don't slide if u have no collar on.

[@GlucksGym]

That's the idea but there not good and the hollow sound the bar creates with them makes them even worse

[@GitarenEnBananen]

If you have the money for it and plan to keep lifting for many years just buy a good barbell. I have the strength shop bastard power bar in stainless steel. Ohio power bar was sold out all the time around that period, but I'm very happy with this barbell.

[@christiancarver1663]

Hey keep at this, these are a good watch

[@GlucksGym]

We're trying! Thank you!

[@guntassingh9432]

for under 200 dollars the xmark bars look pretty good

[@michaelpoplawski3246]

Dude is hysterical 🤣

[@GlucksGym]

Welcome to the channel 😇😁

[@ThinkMoneyBenny]

What are your thoughts on the Synergee 45lb Rhino Power Bar Cerakote barbell on Amazon? I just ordered it. I hope it’s a good bar!

[@rodolfomedini9931]

I bought a cap on86b Amazon prime for $100 five years ago... But rogue boneyard bars can cost under $200 when they boneyard their economy bar but after tax is just about $200

[@GlucksGym]

Rogue Boneyard can be such a good deal!

[@pleton80]

i was hoping you would have put on weight till it breaks lol lol

[@GlucksGym]

We really debated it but ran outta time

[@kythibea]

Curious to see your review of the Bells of Steel bar. I have the StrongArm Sport branded version and love it.

[@GlucksGym]

It should be within a few weeks. I've got a few things queued up.

[@MonkeyBarsEveryday]

My stainless/stainless Ohio power bar was just delivered yesterday. 🤤

[@GlucksGym]

Feel free to return it for this one 🤣

[@Rakkhun369]

I own this bar, it bent out of shape really fast, so I only use it for squats now.

[@GlucksGym]

Hahah must be fun with those

[@rexhenderson7020]

Ahhh the fabled Yaheetech Barbell, forged from the finest smelted pot metal 👌

[@GlucksGym]

Truly an incredible bar

[@birddogg3270]

Just ordered an American barbell California bar for $239 on sale granted its zombie green $259 shipped tmd. Can’t argue with that price given what they go for reg price

[@spons1982]

i love my rep gladiator bar, great bar.

[@GlucksGym]

Probably not as good as this one, right?

[@spons1982]

​@@GlucksGym oh for sure, bud. no where near as good. :) I'm going to return my gladiator and get one of these.

[@keithhoneycutt2324]

Ahh handys 👌

[@GlucksGym]

😇 I'm not sure what you mean

[@Al.j.Vasquez]

I got a 6 feet bar of that quality. I took the sleeves to a lathe, opened the holes to 28mm and installed a roller bearing (12mm inside, 28mm externally) and it rolls just fine, if i wanted to go stupid i would add conic bearings for the inner part of them but i won't do that. So you can take a 100$ fixed bar and add rollers for like 25 extra bucks. The sleeves will be tight and roll just fine for most purposes. I am thinking about using 400 grit sand paper on it because it's freaking sharp to grab.

[@greyarea805]

Fair but you do need a lathe

[@willcaspers6120]

Please do a review on the stripper pole...

[@GlucksGym]

Hahaha but who tests it? Me or Wynie?

[@willcaspers6120]

@@GlucksGym You! I think I speak for most people here...

[@GlucksGym]

I'll make sure Wynie knows that too 😏🤣

[@alelectric2767]

Bought a Synergee cerakote bar (Canada). I’m sure it’s not manufactured here but it is assembled in Canada. Price and quality are good but it has to much spin. Think it’s intended for crossfit.

[@emcduffie916]

Do you have any reviews about which tv, computer, or monitor is good for a garage gym??? I’m wanting it for live web fitness with my trainer, on demand fitness classes, music, etc.

[@GlucksGym]

Ooo you know what we're about to add one ourselves! Though we use something else for music we're about to add a tablet and TV

[@thisguyrighthere4634]

would use this kind of bar for landmine exercises

[@GlucksGym]

Thats a good use for it or you could make a quality video review as well 🤣

[@KyleP133]

Reese is still hot. Cap The Rebel bar was right around $200 shipped from Amazon and its a powerlifting style bar with center knurling (no slidey back squats) and 190k tensile strength. The only thing I dont really like about it is the ribbed collars. That "The Beast" bar doesnt have the center knurling and is 110k tensile strength.... I dont think I'd buy it for more than $200... you're getting closer to really nice bars past that.

[@fastcar42069]

Im guessing this would be a good beater bar for using in my rack mounted landmine? Dont wanna scrape up the cerakote rogue bar i have

[@GlucksGym]

Nah gets Titan's Economy bar instead. Similar price and on sale a lot and it's 30x the bar

[@migael581]

Just realized why I recognized this barbell. Because I own one. I checked and sure enough there were lots of free metal shaving in the sleeves. Talk about a great deal...

[@GlucksGym]

The first step to healing is admitting. I'm proud of you Migael.

[@herrnoname2.094]

Hope you trolling us with your lifting techniques😂

[@GlucksGym]

Lol the OHP is because these b rolls are filmed around midnight after working and working out, I'm about dead at this point

[@herrnoname2.094]

@@GlucksGym ok 🤗, thanks for your great content, i enjoy your Videos a lot ♥️

[@lewisbelton2770]

Subscribing for the dad jokes.

[@thomvandam8948]

I actually use this as my main barbell 😭

[@GlucksGym]

I'm so sorry Thom

[@DogginsFroggins]

How heavy have you loaded it so far?

[@thomvandam8948]

@@DogginsFroggins 140kg, I don’t have more plates.

[@tiennguyen-mf6zz]

Can you give advice on good cheap bars now? Which one would you recommend?

[@roundup1253]

What fancy kind of military press style did you present in this video?

[@GlucksGym]

The kind where you work a full time job, workout, then spend hours filming to then realize it's midnight and you have to film b rolls

[@roundup1253]

@@GlucksGym kk, no problem, My hobby is criticizing others military press because that is my number one press 🤣 whereas I suck in bench pressing. Strict Overhead press is 90 kg 1RM and bench is only 110 kg

[@Jeff-iz1ip]

I always keep a cheapo bar to do some landmine movements. Don't have to scratch up your nice bars

[@GlucksGym]

That's where I'd put this thing as well if I already had it

[@fencingrocks3]

I use an axle bar for that same reason.

[@dkmchui]

I don't understand. It is just a barbell. why it matters with the cosmetic damage like a scratch? it is not a Hermès.

[@GlucksGym]

Some people don't want the things they paid money for (especially when you pay big money) to get beat up.

[@fencingrocks3]

@@dkmchui Some people like nice things to stay nice. But I think most people that have a beater bar already had it, and didn't just buy it to avoid scratches on their nice one.

[@Bob_the_Depresed7717]

chad like content

[@Syncedits17]

really like the bar but im looking for a 20kg bar

[@EHerc]

Great Review but what is this OHP Form brother

[@GlucksGym]

It's after working a full day, filming well into the night, and having already done shoulders then realizing I need one more clip. I need more time in the day lol

[@PP-wf1ul]

now this is a review.

[@GlucksGym]

😁😇 Thank you

[@LinkHylia763]

I got a Rogue Euro Oly competition bar that was in their Bone Yard for $138 shipped.... I'm thinking it was used in competition or in the training/warmup rooms...

[@GlucksGym]

Boneyard or the used section?

[@LinkHylia763]

@@GlucksGym it was in the boneyard listed under olympic training barbell with center knurl. Now its like $300 range. Still a great deal though...

[@LinkHylia763]

@@GlucksGym the IWF mark was removed

[@mdjak3686]

Hey Gluck, I’m searching for dumbbells that are shaped like a triangle, a specific make. Maybe invented by the guy who invented the open kettlebells. Any idea?

[@GlucksGym]

You don't men the Havak triads do you?

[@mdjak3686]

@@GlucksGym dude u r awesome. That’s exactly what I was thinking of. And I almost ordered them. Last year 299, this year 359. To use your innuendo and double entendre, I could swallow that increase. But for ONE? Over $800 with shipping for a pair? Nope.

[@GlucksGym]

Happy to have helped even if you didn't end up getting them 😊

[@mdjak3686]

@@GlucksGym having just ordered a Woodway 4Front and a Freemotion Dual Cable Cross, I gotta stop the bleeding somewhere. Lol.

[@bstrongr2570]

Gotta work on that OHP ROM my friend. Entertaining video nonetheless

[@GlucksGym]

It's a quick b roll after working, filming , and having already done a shoulder workout that day so it's not normally that bad haha. Thanks though

[@Dave-ii4jh]

Looking for a good rack pull bar any recommendations?

[@GlucksGym]

Depends what you want to spend, maybe the BOS Barenaked? Should have the review out in a few weeks but at least it's not going to kill your wallet.

[@franisdaman]

The barbell’s passive knurling was meant so it can double as a stripper pole 🤷‍♂️

[@GlucksGym]

Man I really missed that. I need to redo the video

[@franisdaman]

@@GlucksGym I literally had to watch this video 3x to make sure you didn’t mention that reference haha 😂

[@GlucksGym]

Thanks for the watch time 😁

[@carps_gym]

Put some sleeves on the stripper pole.

[@jrsmith5]

HAHAHAHA!!! That sound!

[@GlucksGym]

😁 The intro wrote itself

[@Mnydnz]

LOl I have that barbell but i bought it back 3 years ago. The first one the coat was chipping off and they sent me a new one. I didntt have any issues with the new one but I could imagine people having various issues due to the poor quality control

[@GlucksGym]

Yeah I got relatively lucky with this one but still...

[@Sboarder-ul6cr]

So... what new rack did you buy?

[@GlucksGym]

Ohhh that should be shipping out soon! 😏

[@Sboarder-ul6cr]

Soon? Well then we know it's not Sorinex

[@GlucksGym]

@@Sboarder-ul6cr you got me there

[@billyanderson4493]

Your videos always make me laugh so u got a subscribe like and comment from me

[@GlucksGym]

😊 That's all I ever wanted! Thank you so much

[@Doggcow]

Why don't you do some reviews on Giant Lifting stuff? They're local to me and it seems like their gear is indistinguishable from the big dogs but way cheaper.

[@larrysutton2001]

I’m a reasonably sure my local YMCA bars are worse than this but not by much. Anything over 315 and it just bows and wobbles. Lucky for me they let me put my OPB in storage for when I go. They probably don’t want me destroying bars as if I could LOL.

[@GlucksGym]

Oh man. My local Y was pretty decent. Do you think they take it out when you're not around!? 😂

[@larrysutton2001]

@@GlucksGym i wouldn’t get lucky enough to have someone wrap their hands around my shaft.

[@-G-Unit]

I'm 99% sure this is just the stripper pole with sleeves on it.

[@GlucksGym]

I really feel like I missed a joke opportunity with the stripper pole and barbell because you're the second person to mention similarities between them

[@markhalstead2386]

My rackable curl bar weighs what that barbell weighs! It was more expensive too.

[@GlucksGym]

My non rackable is pretty close now that you mention it

[@Val2073]

I bought a Sporzon! Olympic Barbell for $74.15 This is probably the cheapest 45lbs Barbell I found.

[@dessertstorm7476]

selling an olympic size bar with a 300 pound capacity seems pretty hazardous, and borderline unethical. Only the person who bought the bar would even know its limitations (if they even read the specs) and its being advertised for "light commercial use". And like you said why have that the 15" sleeve with a 300pound capactiy, even 3 bumpers is going to leave way more space, so people will just assume that can load it more.

[@GlucksGym]

Pretty good points though we loaded it a bit over spec and it's not bent yet though the one before this we did bend in normal use (same bar) though that was loaded probably around 500lbs for deadlifts and the bend wasn't terrible but still.

[@beltfedstrength9157]

I just want to hear more about these Friday night activities….

[@GlucksGym]

Hahaha well you see...

[@bradrolleri2909]

While I appreciate reviews on KZbin, I find myself over analyzing/ overbuying on products. Normally the cheapest products are "good enough" and that I would have never noticed the differences in being significant. My example being that I went from the Titan regular olympic bar to the Stainless Steel Ohio bar with absolutely no good reason.

[@fly1ngpapaya]

So you're telling me this bar far exceeds my fringe lone star bar?! That I should throw it in the trash and buy this!!!!? Fuck already done. . Thanks boss

[@GlucksGym]

Glad to have helped. I'm happy the review helped you upgrade to this sick hex bolt

[@fly1ngpapaya]

@@GlucksGym 🤗🤗🤗🤗🤗

[@fly1ngpapaya]

Joking aside the lone star bar is the best bar I've ever handled and used.

[@GlucksGym]

@@fly1ngpapaya you know they just used me as an advertisement in their email from my bumper review so maybe I got some pull there

[@fly1ngpapaya]

@@GlucksGym sweet. I try not to sound like a shill but I love their customer service and products. Plus they are funny as hell in their reviews and questions.

[@paulrogal3367]

that bar won't bend, it'll just snap in half. very cheap but probably even more dangerous.

[@GlucksGym]

I can't believe you're criticize this work of art!

[@MushookieMan]

There's no reason to expect it would snap in half. It's not hard, brittle steel.

[@satinderjit4]

Great for a @#$* the bar exercises. I would use that as an outdoor gym where I know it would rust and be exposed to the elements.

[@GlucksGym]

I would 100% behind leaving this thing outside 😂 not a bad idea for that though.

[@theliverpoolfc]

Repurposing this bar as a pole dancing bar should be the sequel to this review. We know you won’t disappoint your rabid following.

[@GlucksGym]

Ahahha I'm hearing a lot about this stripper pole

[@DingusSquatfordJr.]

Hum I got a $35 7ft bar

[@jeremyrowe1179]

Fitness gear bars are trash... They are probably nearly the same. I had a older chrome cap bar I used for awhile it was ok. I've also used the titan cheap bar. Thats not great either.

[@GlucksGym]

Yep hard to expect much for so little

[@David-hy7rn]

Nice way to say "What a piece of shit this thing is" 🤣

[@GlucksGym]

It's... A barbell 😂

[@r.alexis303]

So is this a good bar for being on a budget

[@GlucksGym]

No, get the Titan bar I talk about towards the end. It's 10x the bar and goes on sale all the time for around $100. It's in my Cheapest Home Gym Build video I just did as well. Great value for the price.

[@r.alexis303]

@@GlucksGym alr thanks man 👍🏽

[@120soldier]

I bet any money that Yahitech still came in BETTER packaging than TITAN 🤦🏻‍♂️. I Just received a Titan bar, one end looks like a dam egg 🥚😤

[@GlucksGym]

Probably comparable but I'd give the advantage to Titan on this one. I'm not sure you could do less unless you just strapped a packaging label on the bare bar 😭🤣

[@120soldier]

@@GlucksGym 😂😂😂 Great content. Thanks 👍🏼

[@TheGooglySmoog]

I legit own three of these. Bought two of them for $20 each. Couldn’t pass a “good” deal. Should have sold one of them during COVID price gouging would have paid for my whole gym and half my mortgage.

[@GlucksGym]

Hahaha you're right but paying $20 for it is a steal regardless of the quality

[@GlucksGym]

Or a beater for landmine etc

[@Thebodfitness]

I wanted to see you load it up with weight and break it😢

[@dc2090]

Bare steel / naked barbell, I can't understand why anyone would buy bare steel. If getting a BOS bar I'd get the multi purpose olympic barbell, it's black zinc and still $200.

[@GlucksGym]

Bare steel has the best feeling to it as there's no coating on the knurling so with powerlifting, especially deadlifting that grip would be the appeal. Some people also like how they patina and look with age. The multi purpose bar is the same price but not made with the same intended purpose. They can do the same things but that doesn't mean they both do them equally well.

[@carps_gym]

NO!!! Not hex bolts

[@GlucksGym]

Yeah... The hex bolts...

[@carps_gym]

Not sure what’s worse hex bolts or teeth

[@GlucksGym]

Hahahha the movie right?

[@TrenbologneSandwich]

My old gym bought the Beast bar... It's absolute dogshit Honestly sad that I have a nicer bar than a gym

[@GlucksGym]

That is not a commercial bar it's a budget bar for a reason. I can't imagine how poorly it would hold up in that setting. Sounds like a junky gym.

[@TrenbologneSandwich]

@@GlucksGym The already non existent knurling became pretty much slick within a month and the collars don't like to spin at all. Also I'm pretty sure I bent it pulling 500lbs because it felt different after that

[@jieji1123]

Can't really trust those reviews those days. All those Chinese sellers are doing the "5 star review for $20 AMZN gift card" thing....

[@GlucksGym]

That's a lot of that but there's a lot of people mixed in too. Or companies switch the product to keep the old review base

[@kirktitgen6395]

I like your channel and content, but leave the gutter talk like lubing shaft and condoms for the immature and unsophisticated Basement Brandon. Look up to Coop to see how to promote your brand to professional companies like Sorinex and Rogue. This kind of talk may get few chuckles from infantile viewers, but really everyone grows one day (hopefully) and find these talks somewhat putting off. Another Channel which is very decent (but has nothing to do with review) is Alan Thrall's. Good luck and Happy New Year!

[@frostedbutts4340]

Maybe you need to loosen up a bit Gramps. I like that he jokes around like an actual human rather than being another corporate shill.

[@kirktitgen6395]

@@frostedbutts4340 Username checks out. Also, when you talk decent in front of your family and kids - are you an actual human or a shill? But then, you probably are 14 years old and which makes you a target viewer and subscriber of Basement Brandon.

[@GlucksGym]

I think you lose some of persuasiveness of your argument by insulting those you talk to and mention. I think what Frosted means is that some reviewers are more interested selling you things rather creating actual reviews. I appreciate the feedback, we're always trying to improve.

[@kirktitgen6395]

@@GlucksGym Agreed. And I also know that most are here to sell on youtube, and will not deny receiving free products in order to review as "unbiased". Some youtubers have gone to the extend of paying from their pocket, only to receive monetary compensation later from the manufacturer. So when they say, I bought this from my own money, they are not technically lying.

[@drwtng]

... crapping on this is like crapping on concrete dumbbells.... we use what we can afford....

[@GlucksGym]

It might just be a fun video that hopefully helps some people avoid this thing. I do recommend a better bar for the same price as it's on sale every month and a few others that are much better for a little more. It's not about price, it's not a good product and I think that's clear from the points made in the video.

[@tommylau7457]

i will just buy a bastard bar instead

[@thumper300zx]

Pubescent review. Nice attempt at humoring your way through an accurate and potentially helpful review. But, you lost me.

[@michaelderenne9838]

This is one annoying guy. Last video I'll be watching. Dont make this guy big on Facebook guys. Rediculous

[@baylee0831]

FIRSY

[@GlucksGym]

Firsy

[@baylee0831]

@@GlucksGym wtfff and u know i cant read!