Buzz Gets a LIFT!!! FMS 1/6 Jimny LIFTED and SENT...HOW to DIY on the CHEAP!! 🤑

[@TomleyRC]

haha love it, what a wild ride for Buzz! I need to do these mods to mine!

[@daylightdies7194]

You’re the definition of what our hobby is about ❤🇬🇧 hopefully you and your family have a wonderful Christmas

[@disciplinerc]

Ah thanks dude 🥹🥹 Same to you my guy 👍😎

[@LEORedSun]

I came here to see how the lift is done but I actually enjoy watching this video, Great job!

[@disciplinerc]

Nice dude!! Hope it was helpful and got some laugh among the way. Buzz still has one more adventure in this rig soon 😉

[@rcboys619]

I gotta build one now.

[@Adamas_83]

I love that you have no reservations about modding things and running them hard. Tinkering and messing with what the factory puts out is a big part of the hobby, and I love that you're never afraid to dig right in! Merry Christmas!

[@disciplinerc]

Haha thx brother!! SEND IT!! Merry Christmas to you too good sir!! 🤘😎

[@Adamas_83]

@@disciplinerc Just bought FOUR WLToys 124016s, plus sand paddles and 12428 beadlocks for each one for the whole family! It's all you and Phil's fault (In the best possible way). I can't wait to get th all painted and go for a rip!

[@paulyearley1084]

I just picked one of these up, and can't wait to drive it (charger arrives tomorrow!).

[@disciplinerc]

Have you sent it yet? It's a really cool rig dude!!

[@paulyearley1084]

@@disciplinerc Finally got my battery situation sorted out (this is my first time using a LiPo battery and I am not fond of setting my house on fire), and it's going for its first drive this afternoon. I'm so jazzed about this thing. ....and then yeah, I'm going to have to lift it and throw on my Pro Line Boggers that are way too big for my SCX10 (1.9s, which will look weird, but I have them laying around). My sister agreed to snag the most raggedy Barbie doll her girls have for a driver, too.

[@stuartmcnamara9610]

You turned it into a great little truck! To infinity and beyond!

[@disciplinerc]

I hope he can handle what's next 😜

[@dexterbeattie7884]

After watching you play with that . Now I have to get one! 😊😂😂what a Blast!

[@disciplinerc]

Now all we need is some more power 😉

[@eriksimca9409]

i never figured out how to get the grill off to paint the inside... and i didnt think of mounting the servo from underneath instead, i just stole one of the extenders for the shocks since i didnt remount them

[@disciplinerc]

It's a lot of fuss tearing these things down. If you don't get the sequencing right, you have to go back in and redo a lot of work 😅

[@BanjoStu]

Poor Buzz, you killed him so many times! 💀

[@disciplinerc]

Yup, he ded

[@PERTHWESTOZRC]

That's so much better now its lifted, great job buddy! 👍Awesome deal on this one too, I remember Dan telling me about that Cyber Monday sale, I looked it up on Amazon AU but was still full price.

[@disciplinerc]

Agreed. Yeah totally good deal I couldn't pass up. Getting some snow tonight...Buzz will be ready 😁

[@RC-ll1rt]

Totally impressed ! U Sold Me On This Rig ! Thank You , Big Fun Video !

[@disciplinerc]

Nice!! I think a 3rd round is in order very soon 😉

[@elgatooff-road719]

0:44 bro’s beefing with the mini figure ☠️💀💀

[@disciplinerc]

It's in his eyes, he doesn't say much but when he gives me that look...it's go time 😤

[@JmanZ71]

Where can I get those tires! Love this!

[@disciplinerc]

Ahoy!! The 2.2 rims and RC4WD Mudslingers can be picked up off Amazon for pretty cheap. Wait till you see what I have in-store next 😁😁

[@JmanZ71]

@@disciplinerc so hold off on buying those because you will show a better pair?

[@disciplinerc]

@@JmanZ71 no those are great for crawling. I'm doing some speedy stuff, different setup

[@boddlook]

That was SICK! You showed it NO MERCY! COBRA KAI STYLE!😂

[@disciplinerc]

I think I still have one more vid out of this build coming. I popped a driveshaft on 6s, waiting on a replacement...if that's a hint 🤫

[@boddlook]

@@disciplinerc Wow you used a 6S 😟

[@disciplinerc]

@@boddlook it's a whole story arc with Buzz and Salina...all will be revealed in time 😅

[@phw340]

Glad Bud survived at 8:40! Mods look great! I modded my Jimny but have yet to bring it out. You have a great area to crawl in! Fun to watch you videos!

[@ivadavis]

hi! looking at you, it looks simple : ) by raising the suspension, did you lengthen the tie rod which goes from the front axle to the steering servo? where is the original length? thanks.

[@disciplinerc]

Its the stock length. I did need to put spacers under the pivot balls to reduce the steep angle and reduce binding

[@ivadavis]

@@disciplinerc Ok thank you ! I will do the same ! ; ) just have to see how to fix the front shock absorbers... : ) see you soon

[@Fortes_RC_Adv]

Great video👌 The Buzz is a crazy driver🤪🤣I recieve mine Yesterday 💪🤩

[@edgargarcia9530]

🇺🇸Very impressive with this build THE BEAST looks awesome bud …. Buzz looks like he had fun thanks for another great video 🇺🇸👍

[@disciplinerc]

I think he did too 🤣 Round 3 will be impressive too 😉

[@edgargarcia9530]

@@disciplinerc sweeeeeet man can’t wait to see the video…. Great sense of humor you make me laugh takes the edge off all the time THANKS👍🇺🇸

[@modelcarjedi]

Good stuff !!

[@disciplinerc]

Buzz has another truck up his sleeve with this one I think 😉

[@bassyguitar]

love the vids man, just subscribed! i love my jimny and have done the same with the suspension and what a world of difference! i do need to upgrade my servo now too with the added vanquish wheels and hyrax tires lol. very cool car!

[@disciplinerc]

Thx dude! Switched to a brushless setup and the pinion left the chat 🤣 The snow just left us, so I'll be getting it back on track again soon 😉

[@jasonsrcstuff9278]

1000% better. Love the spring over axle conversion!! Full scale engineering mod. So sick!!

[@disciplinerc]

Yeah, super happy how it turned out

[@jasonsrcstuff9278]

@@disciplinerc plus, now that Buzz’s ride is custom, he’s getting some action with the ladies.

[@RCBirds]

Great upgrade video. Very well edited. Bice eagle

[@disciplinerc]

Thanks my guy!! Round 3 with this truck?? 🤔

[@Abelracingteam]

Amazing mate ❤

[@dellystinky]

That's thing looks mean nice build 🔥🔥🔥

[@disciplinerc]

Thx bro!! Needs a bit more jam though 😜

[@RobynTapps]

Im so glad someone else outside of graffiti knows about Belton Molowotow lol them and Montana Cans are the best markers around when it comes to paint markers.

[@disciplinerc]

Right? They are awesome 🤘😎🤘

[@IowaBudgetRCBashers]

Your videos always make me smile.. side note you should go as Frank Zappa on Halloween 😂

[@disciplinerc]

Zappa OMG YES!!! 🤣🤣

[@HenryCalderonJr]

Awesome 😎 lol

[@disciplinerc]

Buzz will return...🤩

[@adampsrcs3487]

Definitely looks and performing much better dude.lot of truck for little money 🤑

[@disciplinerc]

Yeah totally! If I had paid full price, I might have been a little gentler....(probably not 😂)

[@adampsrcs3487]

@@disciplinerc lol 👍😂

[@cozy_Fozy]

Good times 👌🏼

[@disciplinerc]

👍😎

[@jasontaylor6779]

That was so much better that I imagined with the lift and mods it's awesome. Looked Soo much fun and such a great spot to drive it. Shows you don't need to do 100 to have fun. Next step X Maxx wheels and 8S ?

[@disciplinerc]

8s you say? 🤔🤔🤔

[@jasontaylor6779]

@@disciplinerc well that is my standard answer to everything.

[@BangForYourBuckRc]

“To infinity and…” uhhh wait a minute, “ infinity” is Nissan. Ok ,”to Suzuki and beyond!” 😂 Excellent upgrades and mods you did! It really did make quite a difference ! “Salt water “ did you say that’s salty water? I sure hope this thing doesn’t start to carrode ! Great job Aaron!

[@disciplinerc]

😂😂...as for the salt water...we may have some issues 😬

[@sharkusd]

Love it

[@disciplinerc]

🤘😎

[@ivanponce9658]

Awesome , big difference , can I ask what size are those tires? I got one and want to change it

[@disciplinerc]

1/10 2.2's for rims and tires 👍

[@AgeOrmstad]

Hahahaha🤪🤣🤣nice man💪.

[@disciplinerc]

Yeeet!!

[@eddiemorquecho2074]

great video!! You have me wanting this Jeep! The Battery is in the front? what size battery does the Jeep use?

[@disciplinerc]

Yep, it's under the hood. I can fit a 5200mah 4s in there, so if you went 5200 2-3s it would be fine. Lots of room

[@parnelltousaint1030]

Where did you get your leaf springs?

[@disciplinerc]

They come stock with the truck 👍

[@mikiryushioto3115]

Technically, if you bought 2 of them, you could have the previous one for "on the base" and this one for "off the base" wink wink nudge nudge. 😂😂😂

[@parnelltousaint1030]

Am great I find this video now I know how to lift my truck

[@disciplinerc]

Awesome!! Glad I could be of help my guy!! 👍😎

[@robertkenney7122]

How fun would it be to go full nerd and coil over long travel this rig like we do in the full size community.

[@disciplinerc]

Winter is coming, and Buzz has some plans 😉

[@RcTimes2055]

Way funnier... totally diferent machine 😁👍

[@disciplinerc]

Haha, Buzz is just getting his neck brace fitted today 🤣

[@RcTimes2055]

@@disciplinerc eheheh poor buzz 😁😁

[@JmanZ71]

How did you solve for bumper rubbing when turning on full lock?

[@disciplinerc]

A Dremel and some choppy choppy 🤣 Took about an inch off either side 👍

[@JmanZ71]

@@disciplinerc thanks brother will do! Does it look weird with it being a bit short? Yours looks great on video… was it chopped in your video?

[@disciplinerc]

I think it looks pretty good, like it was spose to look that way. Check the video and see what you think 🤔

[@nikoleo_.m]

What size is the wheel and tire set up

[@disciplinerc]

These are 2.2rims with 4.88 wheels 👍

[@nikoleo_.m]

@@disciplinerc Thank you!

[@_blood_moon_proto_1500]

i find it funny how few realize, that at first glance, its bashing, yet despite that, its hilariously scale, this is literally what made the sj410 so popular in the uk

[@disciplinerc]

I know it right? I built a 6s brushless version, but it broke almost instantly. Need to revisit that idea 💡🤔

[@_blood_moon_proto_1500]

@@disciplinerc maybe try what the scx10II deadbolt comes with? sure its not the fastest but the electrics are solid with plenty of power, for speed tho, im not so sure what to use, then again, im pretty new to brusless

[@TheUnknown714]

The facial fur makes it return. Heck yeah. So just to let you now, Latrax just released the really rally in some wicked new colors. Personally I like the green version and the orange version. Would be great for you to review. Awesome video once again.

[@disciplinerc]

Thanks man, I'll have to check it out 👍

[@GSG-lc5zm]

👍 that's what I did to my first samurai (full size)...simple & effective... But a had many sammys... And the last one, the last one, bwahahahaha you shoulda seen that one. Sick 😂

[@disciplinerc]

Omg awesome, would love to have one too!

[@andreewebb671]

What kinda battery did you use?

[@disciplinerc]

Just a 3s - 5200mah. Give a good amount of weight to the front end 👍

[@andreewebb671]

@disciplinerc geez thanks!! I just bought one on Saturday and I'm stoked to get it running.

[@disciplinerc]

@@andreewebb671 👍👍

[@mark-mj5dl]

What size is BUZZ, 1/6? or 12"?

[@disciplinerc]

Just a bit bigger than 1/6 - 12.5" 🤘

[@alantaylor353]

Those ISDT esc's are really good... but both of mine have this strange glitch where after giving it full throttle & letting off.. The next time you touch the throttle even a bit, it does a little blip of full power before doing what you wanted it to do. They're running on different rigs with completely different transmitters/recievers so it's not that, I've messed around with the settings but they still do it. The only way I've found to stop it is to turn down the throttle end points.. Another awesome video, thanks for the entertainment.! Stay safe out there & best wishes from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🙏 ♥ 📻 🎮 🔋 🚓 🚒 🚑 🚐 🚔 🚕 🚖 🚗 🚘 🚙 🚚 🚛 🚜 🏎️ 🏍️ 🚤 🛥️ ✈️ 🛩️ 🚁.

[@disciplinerc]

I found it really tricky to setup right as well, came with no instructions in the package. But after pulling out many hairs got it sorted. It does have its gremlins though still for sure

[@davesnothere8859]

funny thing is that rc car is slightly more powerful than the original 2 stroke full size truck.

[@disciplinerc]

🤣🤣

[@onemansvideos2134]

Night and day difference

[@disciplinerc]

👍👍

[@henrywashington3732]

Dude you are a 🥜 I need to do this with some of my RC cars and stop being so soft.

[@disciplinerc]

Haha yeah bro!! SEND IT!!

[@carlandrews3475]

I don't understand why anybody would move the servo and relocated at the bottom when you lift the truck put a longer screw in the servo horn and the steering rod put a spacer in between it with the longer screw works perfect saves a lot of time and you don't have to modify anything of that nature near the servo

[@disciplinerc]

Less strain on the servo horn and the spacer needed I suppose. Plus I liked the way it looked better. To each their own I guess bro, it's just a toy truck in the end 😅👍

[@changitoman]

Hey I saw in your “about” section it says to email you. Is there an email address available to reach out to you?

[@disciplinerc]

What's up my guy?

[@changitoman]

@@disciplinerc I was just going to send a little adoration your way but I guess it’s probably good to do it publicly! Just wanted to say I found your channel 2 days ago and have since watched almost every video (4 left maybe?). You’re doing an awesome thing and providing really professional looking content. I hope this is your year to break through that dang algorithm and blow this channel up! Your videos let people know it’s ok to work on/ modify RC’s and not just buy the new name-brand items. Anyways, cheers from your neighbors to the south. Subscribed and ready for more!

[@disciplinerc]

@@changitoman aw shucks bruh 🥹🥹 that means alot!! Appreciate you coming along for the ride! Gonna buckle down this year now that the holidays are over and focus on the lulz 🤣🤣