Call Of Duty Black Ops 6: Max FPS Optimization Guide, Fix Stutter & Lower Latency

[@KerwynPromoter]

I was waitng on this video bro ❤

[@TechGuides]

Thanks for the tip on how to manually delete the shader cache!

[@FR33THY]

thanks for you video too, helps alot when wanting to turn some visual settings up without loosing too much fps

[@JREXX]

Gained around 30-50 frames with the config file alone, appreciate you💚

[@xerhac7043]

Absolute legend, can always rely on your optimisations, turning off the BAR completely removed massive fps drops and stutters, used to go from 90-240 now it’s steady 200-240 i5 13600k / 7900XT.

[@OJHoopslife]

Finally a tuber that knows what he's talking about. Glad I found your channel bro. Keep up the great content.

[@Doom49]

Solid advice, thank you for these videos!

[@Ziiiko]

After tuning off BAR my 1% are 10 frames better. Also i had horrible frames in one particular map, the movie store/burger town map i think deleting shaders did the trick. Again the hero Fr33thy comes in clutch to save the day

[@seibertron500]

its probably an issue with NVIDIA in particular. turning on SAM on my 5700X3D/7800XT setup increased my GPU score. but I guess this will work again horribly on BR like the 2 years before it here are my results GLOBAL RESULT AVG FPS - 237 FPS (SAM OFF) | 263 FPS (SAM ON) LOW 5th - 186 FPS (SAM OFF) | 200 FPS (SAM ON) LOW 1st - 176 FPS (SAM OFF) | 181 FPS (SAM ON)

[@R3LAXMUSIC888]

@@seibertron500 are you on 1080 p or 1440p

[@R3LAXMUSIC888]

@@seibertron500 that is decent if its 1440p , ive got a 6700xt and 5800x3d at 1440p ane my average is 160 , low 5th 126, low first 115

[@_SkoR]

When chris drops a video it’s guaranteed to be a banger!

[@jonmac3000]

You're a god send Lad. Perfect quality and 200FPS, not a stutter in sight!

[@SaintsFPS]

I turned resizable bar off and my game feels smoother now. I don’t even need to benchmark it cause it’s that noticeable. Appreciate it

[@Ladioz]

What graphic card and where do you turn rebar off?

[@SaintsFPS]

@@LadiozI got a rtx 3070. He explains it at 8:45. Turn it off in the game’s config files and make sure it’s off in nvidia profile inspector.

[@3metreflattys672]

think it may have fixed my random stutters also on my 12900k/3080 system. however i'm still unable to pull 200+fps average. i feel as though i should be getting a fair bit more than this. what's your benchmark results like on your system if you don't mind me asking?

[@Ladioz]

@@3metreflattys672 cap your game at 144, you'll have a better time

[@3metreflattys672]

@@Ladioz I'm on a 240hz monitor, so im wanting to run it at near refresh rate level. i normally can in any other game but lately it feels as though my pc's been a bit off even in other games. not sure if it just needs a clean out or if it needs a fresh windows install etc. almost seems as though i've gotten a virus or something but i'm not stupid enough to install sketchy things either as im decently knowledgable in that area as well as bios/windows optimizations. just can't work it out. as an example, i've been playing a physics based game thats locked to 62fps, and even in that game occasionally it'll freeze up for half a second and drop to 40fps. however temps are fine etc. 🤔

[@acrasia5718]

Hey everyone. Just wanted to let people know in case they're skeptical. This worked very well gor me personally. I'm not too sure if it was mainly the resizable bar that was the issue, but my average FPS and 1% lows increased a lot and my game is much more stable. Only feedback to the video guy is to make the video a lot shorter and easier to follow. Maybe add checkmarks or something plz

[@Asteria___]

Thank you so much! Went from ~160fps averages and fps dropping randomly to 100fps to 190-200 average and no dropping.

[@gooseuk1985]

How is this game allowed to be released every year ? Every fucking time it's broken and having to do this sort of stuff to make it workable. It's actually insane. Thanks as always for the video, It's very very helpful.

[@FORZEFUL]

It actually works fine out of the box, just not as good as it can be, we like to push the limits which is why we follow channels like Fr33thy's.

[@completelytransparent6320]

fine on my 2021 lappy

[@Lawrence417]

honestly for me is one of the most if not the most optimized cod since mw19... i just tweaked some things and game runs really good, no crash, no framedrops, no lag or freeze of any kind.. my point of view

[@JSmithUSMC1992]

Found that by going into the config file and changing the memory to “Medium” instead of “Extra Large” I’m back to 250fps on almost every map with a 3080ti… I was getting only 170-180 before.

[@acrasia5718]

How?

[@ymi97]

Did you test small and extra small too?

[@jakobolsen1867]

I've actually found that this COD runs pretty dang smooth out of the box this year, but as always you know I'm doing exactly what this fellow says because he has never let me down

[@8ecool]

good for you. Unfortunately not for me...i have 200-250fps on resurgence and just 100-150fps in bo6 mp. Idk why...

[@ashwrightyy]

Yep runs great no issues here, no need for any config changes

[@St8nd]

@@8ecoolthats literally smooth as hell😂

[@jakobolsen1867]

@@8ecool It is absolutely insane that every game runs so differently even though they are all reskins haha

[@jakobolsen1867]

@@8ecool Also, 6800XT here. I can't imagine getting more than 150 frames in any cod 😭brothers got standards

[@kevinpro3093]

From Laggy 130 to Smooth and consistent 200 .. thanks Boss

[@thecayman8567]

Finally! I was waiting for yours brother. I got a massive issue with pocket loss, so let me try yours if it’s going to change anything

[@gunslinga7077]

7800xt here on launch the input lag was crazy. Play on mnk and it was unplayable, downloaded the latest driver also fsr 3 frame generation was on by default. Had to go into the config file folder and manually disable frame generation. Smooth as butter after doing those 2 things ✅

[@saydji]

Hey FR33THY !! hope you´re doingn well i waned to ask about the bottleneck value: is higher value the better or the opposite?

[@astute9573]

Liked and sub this helped massively thankyou my man

[@snk_ow]

was waiting for this thanks so much chris

[@ItsJoseOle]

I was hoping for this video from you!

[@Lewbom]

Its got to the stage i dont know if my game is running good or bad i dont even know how its suppose to feel anymore

[@REVobey]

Would you know how to fix this, my screen is blacked out where id typically see my character walking around? If a menu moves over it then I can see my character but besides that its blacked out. I moved your config over and now getting it

[@zxrosoul334]

With all the monthly updates, and changes since your last video, would you ever do an updated video on the game Rust?

[@silencearsenal]

W vid always coming in clutch goat 🤟🐐

[@duavo632]

thank you brother! worked great for me

[@mr_reds8371]

will you be doing another one of these for the new warzone update/BO6 intergration?

[@Dartix]

Tried everything in this video, my 7800X3D still gets around 80 avg fps lower than your 7950X3D which is odd. The fps drops are a lot better tho after turning re-bar off, the avg fps is around 20 lower tho and the gpu is now below the cpu which is good and applying a minor oc might be a good option but I still dont't get why my cpu avg fps and 1st and 5th are significantly lower than yours. My pc is fully optimised by myself and there's not a whole lot you can do for x3d chips, you'd expect the 7800x3d to be getting more frames than a 7950x3d as welll so it's quite odd. Do you disable SMT? Only thing I haven't tried but I don't know whether it's necessary for a 7800x3d and I always get the "Access is Denied" popup in Process Lasso or Task Manager when trying to change affinity etc on cod.exe

[@tvictormadrid]

Nah bruh this whole guide messed my game up. Never again 💀

[@ZeBear]

Great video but for me having resizable bar on didn't lower the 1% lows. Running 4070s + 13700k and in the benchmark i am gpu limited ~70% of the time.

[@kindrexx]

The config looks "wonderful" for a lowspecgamer's dream graphics settings. A ton of clutter removed and visibility is just crisp. But I got an issue with insides of buildings having blocky shadows that move constantly. Might be the shader compilation, i'll update once they're done.

[@kindrexx]

Seems to be fixed by compiling shaders again

[@filipmitrovic1342]

FR33THY what is the fix for my screenshots not saved in pictures folder? After i followed thought ur optimization guide i lost the folder. and when i cap ss doesn't show in there

[@heromarine5904]

Good Job once again!

[@1337METALL]

a new config is needed, after updating the game it freezes on downloads stats

[@LeConseilDuRap]

This man speaks FACTS

[@ohnyzu]

Hey! Which version of the Nvidia drivers do you recommend to be optimized a little more?

[@-BigCstyle-]

Hi Fr33thy, I have since entered a shadowban loop and did some digging. From my findings I am seeing core isolation being off could lead to false bans on Ricochet. Any thoughts on this?

[@grimzlo]

@Fr33thy can you adress or recommend a fix for that grainy look almost like there are dots all over certain textures???

[@mounsterakiradurif9815]

Thinks you job ❤ for alimentation what IS the best high performance ,optimal ,normal?

[@Profetorum]

For the thread count... it's from -1 to 16. -1 means just disabled, so you can pick 17 (!) different threads, even though all cpus have even number of threads. Why so? Because cod spawns an extra thread for low priority tasks. It gets a bit complicated, but it can make sense to use 8 instead of 7, even it that will spawn 9 threads, because well, 1 is "extra"

[@andrew1981-j5q]

it actually works guys

[@7Deviations]

Crazy how on my 5900X/4090 BO6 runs worse for me than MWII, even optimized and at low settings. CPU is really feeling the pressure now lol

[@Ju_no0]

Yeah 5900x is a great cpu but for a 4090, your probably get more fps with a x3d chip

[@SHUAIMINGLONG]

once i open game i will stuck in opening IU if i follow this VIDEO

[@DrNeoman]

Got the PC gamepass version. Was getting 520 fps on cpu and 320 on gpu on mw3 benchmark. Getting around 300 on cpu and 200 on gpu on bo6 benchmark. 14700k @5.8 ghz, 4080, 32gig ram @7800 mts. Also, noticed you got nvidia dlss frame gen setting in your video, which is n/a on the gamepass version...

[@cjalmighty]

Absolute king 👑

[@rhutabaga]

I would not recommend the VG259QM as the best budget monitor right now, I have the monitor set at 280hz 120 OD and causes this weird thing for me that everything looks and feels slower, the bullets just don't seem to connect well too. When I change the monitor back to its default 240hz 60 OD everything seems to return to normal. Not sure what the problem could be because the 280hz overclock you recommend then the 120 OD is recommended by RTINGS at the max refresh rate. Any help would be appreciated, maybe I'm doing something wrong.

[@frostproduction3514]

i got more frames with this config tyyy, but when i try to switch to nvidia dlss my upscaling keeps putting on cvas all the time , you know fix?

[@srg6591]

Yeah, the fix is to set shaprness to 0... i know it sounds stupid but I saw it on reddit and it actually works

[@lrvalv8312]

The game runs fine just feels like i die in less then 1 second at times while i have to shoot my whole mag before getting a kill. Idk this game is making me crazy looking at all the settings combo.

[@moveminti]

Hey what router do you use / what routers are good for bufferbloat mine is pretty bad I have to know my speed to 45 down and 5 up to be able to get a good bufferbloat score

[@godlikedesigns9269]

Appreciate the video as I've always followed your guides, I have a couple questions, i have the 5800X3D, is it as complicated to set up as the 7800x3d? (I have my render count at to 7 in all 3 configs) also my cpu runs way hotter in bo6 than it did in mw3 (mw3 73-77), im hitting 85 in bo6 which with me being disabled and no money to fix my pc if something overheats I've found myself not wanting to play it, I found an article on twitter where the guy states the game is overloads cores, are you familiar with this issue and would it cause my heat issue? And finally after a fresh install of nvidia drivers would resize bar still be enabled in nvidia profile Inspector? I have it set to false in all 3 config files but my frames are all over the place, i play zombies and they go from 220-240 to 100 to 90 back to 270 around roubd 39 120-140 with extreme lag, I dont have Inspector on my pc anymore but I can get it again if needed, i didn't do a DDU just installed over the old driver with the clean option checked

[@FR33THY]

nah, yep 7

[@godlikedesigns9269]

@FR33THY should I worry about my cpu hitting 85° in zombies , i ran 2 passes back to back in cinebench, multi core and single, it did hit 88° once for a split second 85 & 86 2 times for a quick second never thermal throttled, averages were 78-81, im a stroke survivor and it took me 2 years saving to get this pc, i dont have money to get a new one, i have an arctic freezer 2 360 aio, checked all fan curves they are aggressive, also 3 120 mm intakes, 4 110 mm exhaust, this just started happening with bo6 , idle temps are 44 my house is an oven though (ambient temp around 74-76). If this were you what would you recommend i do im afraid to even turn it on, i dont know how to diag anything going bad

[@ssaehn]

So question: what if, after I followed the video, my game runs worse as well as my PC as a whole when the game is open? Not dogging on you, just more like "this is what happened and I really want my performance back".

[@jw4225]

Do you know what they added or changed in the Nvidia driver 566.03? Because in the config file the recommended Nvidia driver is 560.70. That is what I am running and with no performance issues. Also, I tested RendererWorkerCount on 6, 7 ,8, 16 and 16 yielded the best results and the same in LatencyMon. With 6,7, and 8, I would see Nvidia Kernel Driver DPC but still within acceptable range and once I changed it to 16, I would only see ACPI.sys also with acceptable range. For me, the in-game CPU time and GPU time was consistent and always in between 3-4MS. My system 14900KS and RTX4090 custom loop.

[@Sliceofgaming55]

What kinda fps are you getting have the same build but my fps aren’t close to his

[@jw4225]

@@Sliceofgaming55 I'm capped at 240 and I get it consistently.

[@Sliceofgaming55]

@@jw4225 what about nuketown or subsonic?

[@mossen98]

This game ran better during beta was locked 300 fps now im jumping around the liw 200's

[@bil6729]

cod optimization gets worse every year

[@DONUTT360]

So true unfortunately

[@k0ntroversialgaming]

It's comical how broken the game is. I play Warzone at 1440p and output my stream to Twitch (1080) and YT (1440) WHILE having 2 instances of Source Record recording at 1440p (gameplay) and 1080p (webcam) and still get 180 FPS in game with ZERO stuttering or choppy video. Attempted to stream BO6 to JUST Twitch with both Source Record filters on and immediately drop frames and only get 100 FPS.

[@biggie10101]

I littery got a 4090rtx i13900 ks 64g ram 5200hz and i get 160fps on 1080p lowest settings? All other games run well but this one is catastrophic

[@k0ntroversialgaming]

@@biggie10101 Yup! I had to turn my graphic settings down to low or very low for the game to run decent on an i5-12600K and a 4070 TI Super.

[@mellowistaken]

@@k0ntroversialgamingsame here. It’s ridiculous. Also considering it has forced TAA. Fuckin garbage

[@ymi97]

Wasn't there a way to set the anisotropic filtering to linear? Like in the games before? :)

[@IIPetite]

Would you recommend going for a 7800x3d or a 7950x3d I mostly game and stream on discord. I know the 7950 might be overkill but I’m looking for the best performance

[@lollol-u7f]

just wait for 9800/9950x3ds if ur looking for the best of the best

[@Hodgey10]

Hey Fr33thy thanks heaps for the guide mate. I cant play ANY game in fullscreen mode.. it just tabs out then i have to reclick into it. so i play borderless windowed to counteract it but i like stretched res so cant user it with that. Cheers

[@JSmithUSMC1992]

Try setting your game to open as administrator or by changing its priority level to High. If any other program takes priority over the game, it will not be in Exclusive mode. Make sure Discord or any other overlays are off or not in high priority as well.

[@TimOnFire-NL]

Great video again!❤ only when i use the warzone config file in cant use the map ingame, how can i fix this? ( controller player)

[@Will-q8i6k]

nice freethy very good stuff

[@SaintsFPS]

You mentioned to select reflex on + boost if im gpu bound but isn’t that for cpu bound cases?

[@rimidtren]

Only on

[@BigDawgJayden]

on+boost is for if ur cpu is better than ur gpa

[@BipolarBLKSheep]

So I've been having a big issue with packet burst, even with a 14900k. I realized I hadn't reduced the rendererworkercount to 7, so I changed that, and my bottleneck went from roughly 50/50 with a 4090 and 14900k to 98% gpu, but I also lost some performance. I'm unsure why. Regardless, I am still running into packet burst on a regular basis. I've read that this is either a network issue or a cpu issue. Since reducing the renderworkercount setting to 7, it is less frequent, but still happening. To be honest, I've seen so many videos claiming "this setting fixes it" but it never does and nobody has concisely explained exactly what packet burst is. Do you know? Do you have any idea what settings could fix this? I have more than adequate cooling, running intel extreme spec, and in 3440x1440 with your settings I'm getting roughly 218fps in benchmark (which is less than you get in 4k). The game is more than playable, outside these packet burst issues which completely ruin the experience and I feel like is one of the major causes of desync and hit reg issues. I'm not positive though. Any help is appreciated.

[@BipolarBLKSheep]

I have also noticed that the "rendererworkercount" setting mentions "threads" instead of "cores". My 14900k is 8 core/16 thread so I'm not sure why setting this to 7 is beneficial. Is there any particular reason why this is?

[@fvse1]

i applied this tune to my ps5 and it blew up

[@HKHIKINE]

after your config, i cant no longer enable dlss. everything else i can change but if i try to change to dlss, it changes itselt back to fidelityfx cas. how i can change it to dlss?

[@BigDawgJayden]

dlss is trash anyways

[@HKHIKINE]

@@BigDawgJayden i prefer the look compared to fid cas and i get like +20 frames

[@LordAngelus]

Known issue

[@Jaykurosakii]

@@BigDawgJaydenhow is dlss 3 “trash”? It looks way better than fidelityfx cas

[@BigDawgJayden]

@@Jaykurosakii no it’s doesn’t why do you think everyone runs fidelity cas. Dlls make the game looks blurry when your moving around

[@blackberryedits546]

I'm sorry if I don't understand. But can I just fix the graphics in the game so I won't need these configurations? Correct me if I'm wrong.

[@PUR3xNinjaz]

@FR33THY Hi FR33THY been watching your content for a while, just did your optimization for black ops, just had a question I'm looking at a new pc as mines about 5 years old now and went on your linktree to your build guide jas it been updated recently and was looking at the all out pc and was just going to buy most of the parts on there with a few tweaks of my own, the mother board didn't seem to be in stock is there anything else you would recommend in its place ? Cheers

[@jimforceus2885]

Chris, I have a rx7800xt paired with a i7-10700 on a 1440p - 165 hz monitor. I get 200+ frames. I capped with Riva Tuner to 163 fps and it never dips below 163. Would I be better off going uncapped or leaving it capped?

[@St8nd]

looking for new nvidia control panel settings, specifically what is the best current "Low Latency Mode" setting. i have rtx 3060 + ryzen 5-7500

[@SassyLo]

Thank you bro, also I cant get the reduce services from optimization guide to work on windows 11 pro. works on windows 10 and 11.

[@mellowistaken]

I used the config file edit for cpu affinity and I’m not sure if it even works? Game is still running off my e-cores. Process Lasso doesnt work. I’m on a 12th gen i5. I have 6 p-cores. Set the config edit to 5. Just me or is it the game?

[@BipolarBLKSheep]

Also, how in the absolute hell are you getting single digit latency? I'm never less than 30-35ms but often times I'm higher than that. I have gigabit. I've always had an issue with latency when it comes to COD specifically.

[@ickilla]

Settinga worked great tweaked a few only issue maybe you can help some rock and ground textures are black did this to me before had to run in safe mode to fix then re adjust all the settings again which i really don't wanna do

[@Jayy_R2]

Not sure if it just me but I think the optimisation is good on my 12600k 6800xt system the game runs really good on max settings 1440p

[@ickarus161]

Hey I can‘t find the re-bar setting in the config file anymore after restarting the game. Did they maybe remove it?

[@-yorcs]

When will there be the same optimization Cs2?

[@imclixster]

FR33THY please help! I have a 5950x with 16 cores what do you recommend I put my Render count as?

[@lorlee6993]

so is this safe to do ?

[@GronkyDonkey69]

I was told if you have a amd cpu with the renderer count you should divide your performance cores by 2 and with intel you minus one is that true or no?

[@BipolarBLKSheep]

When I use the ingame benchmark tool, It claims that I have roughly a 50/50 bottleneck between CPU and GPU. I have a 4090 and 14900k. My question is what is the ideal situation? Is a 50/50 bottleneck ideal, or is it best to be 100% bottlenecked by the GPU? I've always believed it to be the latter, but in theory I would think you would want an even balance between the two. I'm not sure and can't seem to find a definitive answer anywhere. Thanks for all the info you provide!

[@BipolarBLKSheep]

Even with some of my settings being higher than optimal, I'm running 3440x1440 and only getting around 190-200fps in the benchmark, with usually something like 44% CPU and 56% GPU bottleneck. I don't know why this is as I have not seen really any other benchmarks with a roughly even bottleneck between the two. It's mostly always one or the other that is much higher. I'm going to reflash my MSI BIOS later today to the most recent version and hopefully that will help.

[@Sliceofgaming55]

@@BipolarBLKSheepdid it help I’m having the same issue with a 14900k and 4090

[@TheSlengo]

IM STUCKED at 50fps or less, i have 5800x3d and 7900xt, after benchmark it says cpu bottleneck 100%. Is my pc broken? Im playing in a 3440 x 1440 monitor and in game i set everything at the lowest, how is it even possible?

[@astute9573]

So if Nvidia GPUs shouldn’t use frame gen in game, I’m guessing turning on fluid motion frames 2 in adrenaline for us AMD users is a no no too?

[@FR33THY]

yeah for input lag its bad

[@ZedShooters]

The video boosted my fps but I have a issue whenever I change my upscaling to dlss it automatically changess back to fidelityfx but dlss gives me the most fps how could I fix this?

[@nightlov]

thank u so much !

[@ItsVibes1]

Went from stuttering and laggy game with 120-160 fps to a whopping 200-240 smooth gameplay thanks to

[@Dev-os9ym]

i have the same parts as you and did everything in the video i had 300+ fps for one game nd now im back to 180 200 ish is there a way to fix ?

[@MrMuZoNaS]

Amd setup, in the menu I keep getting frame cut whatever I press, any fixes? game works fine but the menu frame cutting is anoying

[@Pretended]

In my case, Rebar yielded better 1% FPSs so keep experimenting guys.

[@KiiTzUn3]

Dlss is still unable to be applied?

[@CardinalCake]

Do not use any upscaling or frame gen, it nukes your fps!

[@aithen_b2397]

Would love to use this but everytime I shut down my pc my settings reset.

[@3metreflattys672]

i've got an i9-12900k paired with a 3080 OC 10GB, can't seem to get over 200+ average fps in benchmark for the life of me even after the tweak. feel as though this system should be pulling more than that. however, i think disabling rebar did fix the random stutters i was getting. in your opinion, is the CPU/GPU i've got a good match? i've heard the 12900k may be slightly weak for the GPU, but i'm unsure. Currently pulling about 185fps average in the benchmark results.

[@jerrytweak]

i have similar specs, 12700k and 3080ti 12gb vram. my avg fps is 164 and it is showing my gpu having a 98% bottleneck. seems like that gpu bottleneck is really high

[@3metreflattys672]

@@jerrytweak i managed to get mine up to 198 avg fps, after following fr33thys 2 hour windows optimization guide, i already had 90% of the things he mentioned but yeah. and i think that gpu bottleneck thing is abit cap like it says it because you’ve got everything turned down extremely low so the gpu is barely being used. doesn’t necessarily mean a true bottleneck where the cpu is performing horribly because of the gpu. just means the cpu is all that’s being used

[@Slayzz7]

FR33THY, thank you for the video. I am having an issue where I play 140-150 fps at all times which is great. However when i tab out and then tab back in to the game I am capped at 90-100 fps for the whole time until I restart my game. Could you please let me know of a fix if you have one. Thank you.

[@chelseajack1188]

I have a 4060ti 5800x3d and my fps is awful around 170 with a 360 hz monitor is this normal on this game for those specs ?

[@troublemaker948]

I'm not up to date as i used to but regarding nvidia drivers should we update them directly via Nvidia App or just DDU like old times ?

[@604CS]

I used ddu/nvclean install. Its dropped my frames by 30 updating the driver

[@ashwrightyy]

There is absolutely no need to update to the current driver, there are better older drivers, fr33thy is just an amateur cooker

[@ericcod1productions]

What is your 1080 p bench with resize bar on

[@alMighty8989]

Wth HAGS on I get the DirectX Error so game is unplayable then.

[@phx_don]

I NEED HELP please I put the files in and now my 1% lows are at 10 to 30 fps use to be a lot higher and I can’t fix it and my cpu is at 100% non stop lagging frame drops and everything

[@silentaxeii8520]

thanks for your settings, I'm getting about 440 fps. myself and a lot of others are having problems with keeping the settings saved, I have to keep going in and changing my setting, if you know how to fix please make a video. I've tried a few things and nothing is saving my changes to even things like controller sense

[@FR33THY]

i think its a one drive issue

[@phantom6809]

I have a problem, I don't know why when I select DLSS it automatically changes to FidelityFXCAS,even with your files.Thanks for helping us!I really appreciate you for making this video!

[@driptic]

Pretty sure its just a glitch. Same happened to me

[@stang4258]

Turn the sharpness to zero and then switch to DLSS. I had the same problem and found this solution on Reddit

[@calmarfps]

All those upscalers are broken, they give łittle performance boost.

[@NinTheLost]

@@calmarfps nah for real I don’t even think they work atm they make zero difference performance wise

[@phantom6809]

Yeah is just a visual glitch!But thanks for the feedback! 💙