Subscribe to my channel ! / @reyesbuilt Want to help out with the build ? paypal.me/Four... My social media ! Instagram : / fourpointsixchris Snapchat : / sallythesn Twitter : / sallythesn95
Пікірлер: 306
@kevincruz40454 жыл бұрын
WICKED SOUND!!! The engineers at Ford hit a grand slam with the 4.6-2V design. Yes! The end of the clip Rocks!! Sounds like a drag car! Nice work 👌
@ColinAverill5 жыл бұрын
Any time I hear someone say "I take my car to them all the time," I wonder why they don't find a new place to go so they don't have to keep going back. Haha.
@Lurod_5 жыл бұрын
5:51 lmao diesel swapped mustang
@ReyesBuilt5 жыл бұрын
Lmao
@kenardoevans67354 жыл бұрын
I thought the same thing I was like wtf 😳 🤣😂🤣
@davidlopez-ji4ki4 жыл бұрын
Love it good luck with that in California
@eastoakland-S65feen3 жыл бұрын
I always see a comment like this. Im fron Oakland cali but just moved out of cali & there so much illegal shit on the streets cops dont do shit. Atleast in the bay area once you leave the bay idk its probably different .
@subscribejustbecauseyoucan5 жыл бұрын
Slap your mechanic. Car isnt running properly... "Lets cold start it and rev it too 7k RPM", that'll fix it" 😔😐 why would you rev an engine like that when its not running right and cold. Eidt: nice ride though.
@ReyesBuilt5 жыл бұрын
Cats running amazing no where in this video the car was cold
@subscribejustbecauseyoucan5 жыл бұрын
@@ReyesBuilt oh good. I was gunna say DEEEELLMM!!
@Omararmendariz95654 жыл бұрын
Stfu hater
@phillipbradley72714 жыл бұрын
@@ReyesBuilt Car NOT cats
@johnrau28734 жыл бұрын
Kids that why
@kareemrodriguez24285 жыл бұрын
Sounds nice i have a 98 GT still in project planning to add BBK Long Tube Headers with BBK X PIPE &SLP SHOT GUN.Also adding stage 2 cams aswell can't wait.😎💪
@tagle28184 жыл бұрын
Memories... reminds me of my 96 PI'd GT. I did mine close to 18 yrs ago. VT cams, lontubes, PI heads/intake. It was still slow after...lol. Sold it and moved on to an '03GT, to an '07 GT and then a '12GT. The '12 GT was my favorite. All gone now. 😔
@saulsanchez5285 жыл бұрын
I had been debating all week on either camming my 95 5.0 or selling it to get something newer. I was actually thinking about all the stuff I’ve done to it so far to make a sale post as this video popped up on my feed. Thanks for makin it easy to decide brother I just ordered my springs 😬😬
@ReyesBuilt5 жыл бұрын
Hell yeah brother let the sn95 live on !!!
@wile.emario89573 жыл бұрын
Just got me a sn95. Already got some ideas. Let it Live on!
@ThatLoud3v5 жыл бұрын
My man that 2v its going to hurt some feelings💨 man she sounds awesome😍
@AcidicGamers25 жыл бұрын
$2600 in the build? Shitttt I wish. Close to 10k for me now 😂
@strokerwatson47705 жыл бұрын
Your car sounds awesome one day at a time and you will get there don't be in a rush it will pay off in the long run you will be very satisfied with the outcome of your car keep up the good work my friend I love your Channel
@ReyesBuilt5 жыл бұрын
Thanks brother I appreciate that greatly
@edgarmaldonado53845 жыл бұрын
Hey Chris, the car turned out awesome! Glad I stumbled on this channel, as I'm trying to put my car together as well. Need more sn95 in my life! Cheers!
@philrodrigues92704 жыл бұрын
Nice ride bro. Had a 2000 s281 saleen supercharged with nitrous. Sold it few years back. Building a low mileage 1995 satin black gt now congrats with your ride have fun
@leftnut14573 жыл бұрын
I just swapped a 4.6 out of 2001 gt into my 97 just waiting on a few gaskets and I’m food to go 🙏🏽
@AtTheSourceStudios5 жыл бұрын
Wow... Can't believe you did it! Went all the way! Cams are the dream man and you are right it is surprising how nice it chops! Congrats on the sick car bro.
@raptoratvracing66085 жыл бұрын
Man look into getting some 24 lbs injectors now that will help especially when they tune it I did ford racing injectors when I had the stages 2s put in my car
@ReyesBuilt5 жыл бұрын
I’ll see what’s up with the duty cycle when we put it on the dyno
@tristansmirnow8505 жыл бұрын
True dat
@josephgarza84005 жыл бұрын
Sound awesome. Time to tune and hit up San Antonio raceway. See what numbers she can hit
@ReyesBuilt5 жыл бұрын
Joseph Garza hell yeah
@mrelectron62205 жыл бұрын
@@ReyesBuilt I did a PI swap with cams on a new lower block and it just never seemed to run as I expected. I swapped out the 19lb injectors for the 24lb ones and it came alive but than my old injectors had seen 165K on them. I really don't think you'll hurt yourself going up the the 24's personally. Your most likely maxing out the duty cycle on the 19's especially with the long tubes.
@king187224 жыл бұрын
Sounds badass brotha! U remember building up this 4.6 motors they can sound great when built right! Great job!
@JohnnyJitsu114 жыл бұрын
I have a 98 Gt. Started with stage 2 heads and $15,000 later, it’s at 517 hp and 583 torque.
@rmanfre5 жыл бұрын
Fuckin awsome..can't wait to mod mine up, I have 410 gears in mine and I love em
@dentondunn59415 жыл бұрын
Just got my first 96 Mustang GT, love it. Had cold air intake, dual exhaust with flow masters, and under pullies...runs good and sounds mean, ready for paint now and thinking about 373 gears next, idk about changing intake and heads though, might leave it as that
@danklei93875 жыл бұрын
Been waiting for this video! Good shit homie, it sounds incredible. She chops pretty hard just for a stage 1. Can't wait to see it on the dyno.
@thefishchannel485 жыл бұрын
Bro you should go to the junkyard and find a 97 explorer with the 5.0 it's a gt40 motor intake and heads they make a gt40 and a gt40-P the gt40 has bigger valves and bigger combustion chambers good for boost the gt40-P smaller valves and smaller combustion chambers resulting in higher compression something to think about
@darryl1634 жыл бұрын
This is a 5.0, his car is a 4.62v
@Jackt-33 жыл бұрын
Glad it’s back up!!
@montreceware9725 жыл бұрын
Idle Air Control Valve delete plate. They're like $10 on eBay and they set your idle the same as your tune says it is.
@stanglife97cobra725 жыл бұрын
I have a 97 GT cobra clone 2v PI heads comp 268 cams with the same issue as him IAC is next.
@venom5oh9395 жыл бұрын
Congrats bro!!🔥🔥 now I gotta get my 2v running again!😞
@73challenger50315 жыл бұрын
She looks and sounds great! Your reaction is better than a kid on Christmas morning!!! Congrats, Brother!!!
@ReyesBuilt5 жыл бұрын
Right lol thanks man
@jorgerenegade84015 жыл бұрын
Welcome back Chris!! Man, SalLy sounds beast!!! Nice choppy exhaust.
@ReyesBuilt5 жыл бұрын
Hell yea
@elenor77364 жыл бұрын
I love 95 mustang s gt is the best model Ford ever made...
@reneblanco32115 жыл бұрын
Man bro your car sounds like a beast badass bro
@ReyesBuilt5 жыл бұрын
Thank you!!
@dommustang94835 жыл бұрын
Not bad at all for the 4.6 mine a 5.0 worked
@Ketchieofficial5 жыл бұрын
you definitely inspired me to start my own channel and just go for it
@777Jackp0t5 жыл бұрын
Sounds really good man. I'm gonna take my glass packs back off now because of you lmaoo. Sounds more cammed when it's running open loop, but nice hard work pays off
@mitchellmcdermid21635 жыл бұрын
Sounds sick man I love it I wanna do that to my 98 gt so bad!!!
@Weezer195 жыл бұрын
Wetttttt juiced af u got your stang back man‼️
@4vnickk4185 жыл бұрын
She sounds good 💪🏽 .. ready for u to hurt some feelings
@ReyesBuilt5 жыл бұрын
Yooooo
@nat415995 жыл бұрын
Dope
@lowboostedaccord49335 жыл бұрын
Nice to see you got your Mustang back I like the way it sounds Can’t wait to see it on the Dino bro 🎬💯👌
@ReyesBuilt5 жыл бұрын
thanks bro !
@CarminesRCTipsandTricks5 жыл бұрын
ALL 2005-up Stang owners are REGRETTING themselves!!!! 😲 None of them will ever sound as good as a 2 Valve!! 😎👍👍 But you said "you've all seen the Engine so I won't show you"... I HAVEN'T SEEN IT.
@rodrigoaragon49145 жыл бұрын
3v still look sexier
@manuelito8745 жыл бұрын
No way the 13-14 gt sound absolutely amazing
@erikturner50734 жыл бұрын
I'm a foxbody guy. As far as the later cars go the two 4.6 cars sound good and the three valve cars sound awesome, and have there unique sound. As far as the coyote cars, to me they sound like garbage with really loud exhaust.
@Neighbor514 ай бұрын
Good video need to write down what your gonna say maybe you get real sidetracked by random things which happens but would really add to your content in my opinion. Love the enthusiasm keep it up!
@jessecuellar30665 жыл бұрын
Dam she sounds clean af I hope when I take a trip down to cc TX I can spot this car somewhere cleanest sn95 out there!
@ajw1484 жыл бұрын
Im on the fence about keeping my 96 thunderbird with the 2V 4.6 but this got me thinking. hmmmmmm..............................
@pachurpants5 жыл бұрын
hell yah bro that sounds amazing!!! i cant wait to upgrade mine! and cant wait to see how yours comes along!
@Omararmendariz95654 жыл бұрын
26hundred just for another 80 hp max?? Wtf thats the whole forged rotating assembly yo lol.. each to their own but love the videos and the mustang man.... keep up the good work.
@Omararmendariz95654 жыл бұрын
It don't idle maybe cause the dn egr valve and head swap & the tune since its basically another engine? Smh plus you didn't break in the cames???
@OneNationUnderGod.455 жыл бұрын
"Cheap work" and "performance" should never be used in the same conversation. That mechanic really had no clue that after all that work, it wasn't going to idle right on a stock tune? MAF curve needs to be totally reworked. IAC needs to be reworked. ISC transfer needs adjusting, as well as dashpot. That's not a choppy idle from the cams, that's a choppy idle because its running like shit. need 24lb injectors, and bigger fuel pump as well, otherwise, you just paid that money to have a car running worse than it was in stock form. You cant do work like this without tuning the ECU.
@ReyesBuilt5 жыл бұрын
You’re trippin, I put it back on the stock tune put it on the dyno and it make 275 hp with clean AFR. The stock tune did fine considering the mods done. It was running like shit in the beginning of the video bc it had a can tune for a regular compression bolt on npi motor.
@OneNationUnderGod.455 жыл бұрын
@@ReyesBuilt hmm im tripping huh? so tell me, on that dyno run, what was their target AFR at WOT? what was the total spark advance at WOT as well? Im just trying to be real and honest with you, not trying to be a dick, but I see guys get screwed over way too much when they let other people build their cars. And lets think about this, you threw cams, PI heads, PI intake and have a high compression, to only make about 35 more hp than the stock pi engines made from factory? When that guy bolted on these parts, did he Degree the cams and check PTV clearance? PI heads on NON PI pistons are a recipe for PTV problems. If you would degree the cams properly, put in the proper sized fuel injectors, fuel pump, along with good spark advance and good target AFR, you would easily see 300hp +
@jacobjarvis87985 жыл бұрын
It sounds good with that stage 1 cam bc the compression is a full point higher based of what u said
@ReyesBuilt5 жыл бұрын
Maybe!
@jacobjarvis87985 жыл бұрын
@@ReyesBuilt it's true say u put a stage 3 cam in stock compression it will sound good and drive ok with the right supporting parts and tune but u put all that together with a full point of compression it's a different animal sound and performance wise
@michaelwestermann42035 жыл бұрын
Sounds sick bro keep up the good work
@linoacuna72304 жыл бұрын
When I do a cam and head swap u kind of have to let it break in man as is and then tune it I've been there done it.took a while but after a while it worked with that tune man
@justicedavenport63885 жыл бұрын
Ayyy glad your back Chris
@ae71295 жыл бұрын
That fucking CHOP bro! Congrats on the 2k too!
@TheModAddict5 жыл бұрын
Feels like it's been a year .. but finally! Awesome stuff man.
@RidingtheReaper5 жыл бұрын
Welcome back man. Car sounds lit🔥. Keep those videos coming.
@Bendejo65175 жыл бұрын
Chris later in life when you’re done with this car get a 3v 4.6 cam that one and supercharge it!!!! And after that one get a coyote.
@BLACKKNIGHTMUSTANG5 жыл бұрын
Dammmn Bro. Listen to that Beast 👍
@TheMiltonroad5 жыл бұрын
Great vid sounds killer. I have stage 1 cushman npi cams on my npi heads and sounds awesome aswell. Keep up the good work mate
@lollis_garage36835 жыл бұрын
Started watching your content not long ago man love the channel dude. I heard about you through dbp, keep grinding bro, car is looking good and sounding great!
@ReyesBuilt5 жыл бұрын
Thank you brother I appreciate it
@michaelgraham23475 жыл бұрын
That thing look nice in white , get a procharger next.
@ReyesBuilt5 жыл бұрын
Got a 125 shot for it
@michaelgraham23475 жыл бұрын
@@ReyesBuilt ok nice ride don't blow it up !
@noelramirez15165 жыл бұрын
FUCK YEAH SN95 GANG!!!!
@Ketchieofficial4 жыл бұрын
sounds incredible
@linoacuna72304 жыл бұрын
I have one with the cobra painted on it
@robrico21325 жыл бұрын
How's the throttle response feel. Sounds like she is rev happy
@YungShootaOfficialYSO5 жыл бұрын
DBP sent me !
@christianvalencia44945 жыл бұрын
Fr500s make all sn95 look great
@jimmyschmidt145 жыл бұрын
Next mod is coil on plug with 2 step. Also iac restrictor plate.
@ReyesBuilt5 жыл бұрын
I will probably do that in the future
@1aview5 жыл бұрын
Shopping for parts for my 96 still... doing the same swap !
@ReyesBuilt5 жыл бұрын
awesome bro won't regret it
@FORSAKEN_- Жыл бұрын
What’s the intro song called?
@linoacuna72304 жыл бұрын
I did the egr delete but it still idles high man.and its pissing me off bro.
@hurtzz-lz5gl4 жыл бұрын
1200 for a rebuild is ruff. I pay 500. But honestly I've thinking about getting my own tools and doing everything myself. I want the satisfaction. Currently own a v6 auto mustang. Wanna sell it 2k and either get a 94 to 98 mustang GT or Cobra or a Mitsubishi 3000gt AWD only not interested in FWD.
@ajd70764 жыл бұрын
Beautiful car bro I have a 89 lx I’m working on but did you weld you headers to your Exhaust 🥴🥴
@thebigguy72614 жыл бұрын
I want to see a gt40p 5.0 vs pi 4.6. ive had both with 3,73 gear and bolt ons and my 5.0 feels much faster.
@lookinlost56985 жыл бұрын
I bet some 4.10s and a 100 shot would do it some good. Sick car man!
@sategllib21915 жыл бұрын
4.10s is too high. Especially with nos.
@chewdaman39545 жыл бұрын
Get a tune on it and ol girl sound like a beast 🔥💯
@ReyesBuilt5 жыл бұрын
Hel yeah
@koberossum97695 жыл бұрын
Not to advanced with cars, but what will tuning the car do ?
@ReyesBuilt5 жыл бұрын
Kobe Rossum make sure the car is running top notch, gain some more horsepower also
@Marios2v4 жыл бұрын
Aye probably a dumb question but what is a PI swap ?
@jayv23085 жыл бұрын
Hell yea bro glad to see it going looks and sounds badass miss corpus !!! Gonna have to pay a visit from SA 👊🏽😎
@ReyesBuilt5 жыл бұрын
forsure!
@grocerygetr6871 Жыл бұрын
daaaaaaaaaaaaymn!!! mice
@JohnnyJitsu114 жыл бұрын
Maybe I need to hear it in person, no offense but I don’t like how it sounds. I have the same 98 GT. Too much on engine to name and tuned, but sounds throaty and beefy! Doesn’t sound anything like this. Your car is stalling because you need to tune it and change your tune according to every part installed. Mine idles at 800 rpm. Tuned at Shelby Motorsport. I sit with stage 3 comp cams and heads.
@bustd_gt5 жыл бұрын
Makes me want a 2v, thing sounds nasty!
@soleboy1875 жыл бұрын
Siiiiickk
@Marios2v4 жыл бұрын
Them muffler shop welds lol 🤣
@mekodabest5 жыл бұрын
Yo Chris, what brand of stage ones did you end up going with? Still debating on my 96. Strongly considering the swap..especially now
@ReyesBuilt5 жыл бұрын
Comp cam 262’s
@LuisOrozco-uc2ht5 жыл бұрын
The engine si stock? I'm sorry but I do not know much
@GrSTI5 жыл бұрын
stock bottom end, stock pi heads with stage 1 cams,...
@justinm61105 жыл бұрын
Dam she sounds good bro, good stuff
@damyanpopov13415 жыл бұрын
Finally! 💯🔥
@AtTheSourceStudios5 жыл бұрын
Just get some pypes high flow cats on there and you'll be good with the noise
@lamontdouglas86955 жыл бұрын
Nice ride sounds like a beast is your hood and spoiler carbon and where did you get them at
@AtTheSourceStudios5 жыл бұрын
The black or carbon fiber around the tailights would be perfect.
@ReyesBuilt5 жыл бұрын
Got something that will look great
@AtTheSourceStudios5 жыл бұрын
@@ReyesBuilt please don't go rice :( don't be like ozomeroman 🍚 lol
@AtTheSourceStudios5 жыл бұрын
@@ReyesBuilt jk I know you're nothing like him. You actually do real mods to your ride. Hope you know now everyone will expect a chop clip in every one of your future vids!
@ReyesBuilt5 жыл бұрын
SiREN-DRUMS Hell yeah lol
@73challenger50315 жыл бұрын
No! It would not look great! Sorry!
@elsenortrump47704 жыл бұрын
Deportation for the frog mechanic hahaha isn't that gorgeous he's fabulous he did wonderful job...
@wheeliboygsxr4 жыл бұрын
what’s your wheel set up size tire offset ?
@andrewmendez947 ай бұрын
Good job bro! What can did you have in it?
@ReyesBuilt7 ай бұрын
Comp cam xe262ah
@benjaminbrown75214 жыл бұрын
How did u solve ur stall issue on ur mustang
@themoparted24165 жыл бұрын
Sweet sound man! Ever consider slapping a turbo or 2 on, in the future haha?
@ReyesBuilt5 жыл бұрын
More of a supercharger typa guy
@mikiesmustangs48035 жыл бұрын
Sounds mean bud love the mustang 👍👍😀😀
@ReyesBuilt5 жыл бұрын
Thank you !
@jloggins99444 жыл бұрын
What are your back tires ?
@brssgarage90redmustang685 жыл бұрын
Buy a turbo kit fuck nos i used to have a 93 ford lightning pickup that had nos on it back in the day with a 150 hp wet shot and sprayed it all the time racing fuckers but needless to say i had the truck for 3 years and with all the nos i was using could have bought 2 paxton superchargers save your money and buy a on3 turbo kit just advice
@MRSMITHENTOP4 жыл бұрын
You need to retune it
@justinm61105 жыл бұрын
What gearz you gonna go with? Im not sure what ones to use, im thinking 3.73,s
@harrison4ever1254 жыл бұрын
Awesome
@robbpeters42565 жыл бұрын
OMG its sounds sooo badass!!!!
@hectorlopez99835 жыл бұрын
Badass Stang bro. Sounds mean ASF
@ReyesBuilt5 жыл бұрын
thank you bro !
@aaroncoleman60115 жыл бұрын
Eargasm
@TheBLAXXDEATH4 жыл бұрын
why did they weld the catback to the headers lol what if u have to take them back off or something
@ReyesBuilt4 жыл бұрын
Didn’t have any clamps left over, I just used the clamps for the headers to the mid pipe so we can take it apart for transmission work
@TheBLAXXDEATH4 жыл бұрын
@@ReyesBuilt It looks welded on both sides of the midpipe tho going to headers and to catback. I don't see any clamps
@ReyesBuilt4 жыл бұрын
a big rat sorry this was a old video, I thought this was my h pipe video. I revised it