Can a Full Bolt on 2001 Mustang GT beat a 2004 Mach 1? | DYNO TUNE

What’s going on guys! Thanks for tuning into another one of my KZbin videos! We broke down what been done to my buddie project 2vs car along with a dyno tune and some fun runs. thanks for all the support on the last video and I hope you guys like this one! Thanks again for watching..💯
Follow the Aqua Green/Blue Mustang GT owner: @Project_2v_
2004 DSG Mach 1 owner: @a_slowmach1@_onpointmedia
Stay updated on instagram: @Oscar2v
www.instagram....
Club Page: @thestangbros
CHECK OUT MY RELATED VIDEO!
🎥2001 NEWEDGE MUSTANG GETS A RARE PAINT JOB!
• 2001 NEW EDGE MUSTANG ...
🎥My Mustang Club’s Chill Car Meet turns into SLIDESHOW CITY!
• MY MUSTANG CLUB'S CHIL...
🎥Svt Cobras STEAL the spotlight from FBO 2V at Video shoot (cinematic)
• SVT Cobras Steal Spotl...
🎥750+ HP 2014 Whipple Supercharged Shelby Hits the Dyno!
• 2014 WHIPPLE SUPERCHAR...
🎥Huge Mustang Group Mob to the Mountains and Take Over the Highway!
• MUSTANGS TAKE OVER HIG...
🎥Taking my Bagged Mustang GT to Las Vegas
• MY BAGGED 2000 MUSTANG...
🎥Taking A SVT COBRA To Huge Car Meets
• TAKING A SVT COBRA TO ...
🎥Check Out My Last Video: Should you Bag your 99-04 Mustang?
• SHOULD YOU BAG YOUR 99...
🎥My First Video: Overview of my Bagged Mustang GT
• Overview of my Bagged ...
🎥Reviewing a Termi Swapped Mach 1:
• TERMI SWAPPED 2004 MAC...
Tags:
#Mustang #NewEdge #Transformation #Ford #MuscleCars #LosAngeles #FORD #SVTCobra #Photography #AmericanMuscle #V8 #Stance #JDM #Cinematic #StangGang #559 #Fresno #PaintJob #LateModelRestoration #GoodVibes #StangGang #GrandDesignMAT #HotBoyWheels

[@abasiczombie.]

Watching the GT’s driver head bob when shifting gears is the most hilarious thing ever!

[@maguilar51]

had to go back to rewatch that. lmaoooooo

[@theinternets7516]

280 whp in a 2V is no small feat. That's a nice ride. It makes me even more impressed with the Mach 1 just in general. What a great car right out of the box.

[@midnight347]

I've seen machs hit 280 wheel bone stock.. and 280 wheel is pretty easy with cams I've seen guys do 270 with just fbo with stock cams. It's possible to hit 300 w cams but all the stars have to line up. 280-290 is more typical. I don't think some people realize how much of a step up the Mach is from the 2v they're very underrated that 305 and 310 hp crap is just plain lies lol. More like 335 hp. They put down 280 bone stock to the tire. They're a good bit faster. They trap about 4-5 mph more than a 2v stock for stock and over half second et faster.

[@newedgecarlos]

1st race scared me for a bit until he said he missed a gear. The next raced were super close

[@project_2v_]

I felt the same way until I dialed in third gear lol

[@brandonnichols7999]

Big 4v

[@manaaalsuwaidi3643]

I call an achivment for the 2V ! good to see someone around still driving 2Vs and taking care of them with love! around here in Dubai they totally disappeared :( only me and very few guys drives them 😢

[@seanmckay3392]

4.6L are the best bro especially the 2v i bet your rich ahh hell in dubai so you guys got no snow either so your frames dont rot out

[@The_NJG]

Probably more Lambo's and Ferrari's in Dubai than Mustangs lmao

[@Westhelockpicker]

I bought a new 99 GT and installed a vortech supercharger and every mod you can think of. I even went from the factory supercharger pulley 3.60 and went down to a 3.33 with 42 lb injectors and a new tune. It ran awesome and I wish I never got rid of it. I kept it for a while and I really took car of it. Washed it once a week and waxed it once a month plus you could eat off the engine

[@79chevy901]

You and your friends got some slick rides.

[@mesi9018]

Gtg!

[@anothercarguy2043]

I’m surprised how many of you’ll know each other in real life🔥

[@Hawks2010champs]

Love the new edge content !

[@oscar_2v]

Appreciate you brotha 🙏💯

[@project_2v_]

Damm this video came out ❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥❤️‍🔥

[@oscar_2v]

Thanks my boy!! Glad we made it happen 💯❤️🤟🏽

[@manguny92]

Oscar Killin it with the content 👏 👏👏 let's gooooo

[@arthurdelacruz6879]

Man those are some bad ass mustangs

[@RangerDanger074x4]

Great video!! Would love to meet up with my 01 cobra. I’m in CA. Just had flowmaster cat back exhaust and short throw shifter.

[@project_2v_]

Make it happen baby!

[@petrolhead8851]

These 4v motors don’t play, I just recently bought a 100% bone stock 03 Oxford white Mach 1 with 184k miles and I’ve beat brand new bolt on Subaru sti’s, Mercedes gle 63 which come with a fucking twin turbo v8 packing almost 600hp, I’ve beat on ls3 5th gen Camaros etc…I’m very impressed with my Mach 1 for being bone stock car down to the plastic intake

[@RangerDanger074x4]

@@petrolhead8851 wow super impressive! Any plans for the car? For my 01 Cobra I just bought a jlt intake for it, heard that those are the best for these 4V. Do you have any videos on it?

[@TurboTurdBurglar]

Poor little 2v put up a good fight

[@MustangMike90]

good races that 2v running good

[@vmoya6631]

Excellent video my good man...great work.

[@Yamanijja]

Cool races 🔥🔥🔥🔥

[@lowkey_35G]

Both sound great.

[@clarencetv8789]

Some beasts over there boy👀

[@oscar_2v]

That’s all you brodie!👀💪🏽

[@aslowmach1976]

🔥🔥🔥🔥

[@oscar_2v]

Thanks for coming out papa!🤞🏽💯

[@CT-pc3rh]

Hey bro love the channel keep up the great work your buddy with the two valve mustang ask him after the dyno tune does the car feel faster or about the same

[@project_2v_]

It feels the same tbh :/ ¯\_(ツ)_/¯

[@CT-pc3rh]

Okay kind of what I thought I have a full bolt on two valve and I've been told you need to tie everything together and get a Dyno tune I'm probably still going to do it and spend the $300 but I just always wondered will I notice a difference or with the car just run beeeettteeerr.thanks bro.love the car.mines silver also

[@jacobesp7736]

You will feel the difference if you put e85.

[@CT-pc3rh]

@@jacobesp7736 okay

[@jp_interest4333]

281whp 304wtq isn’t bad, got a 2001 GT with the sn95 cobra 4.6 NA swap with bolt ons made 315whp/300wtq 💪🏻

[@bryanpelayo1382]

I’ll try the Mach one got a 100shot of nos

[@sgv160]

Best intro on you tube 👍🏽 , I watch the whole intro 💯 😀

[@oscar_2v]

Thank you brotha! Means a lot! I need to remake it and perfect it 🙏🏽💯

[@sgv160]

@@oscar_2v it’s 🔥 bro keep doing your thang 👍🏽

[@rickhughett6713]

Looks like an even up run

[@JezusGT]

procharger time😳

[@project_2v_]

Yessir Forsure comin in the near future!😎

[@dh123ize]

Mine has a vortech v3 on my 2003 runing 7psi getting it tuned next month. I hope it doesn't blow up

[@Anelly_Jacob]

Cool intro !

[@shanestewart9505]

Awesome race at the end!

[@Mach1eric]

🔥🔥🔥🔥banger

[@twogunz8533]

Good ass race

[@itsharrydude]

that was some good runs man

[@oscar_2v]

hell yeah they gotta make it happen again 🙌

[@itsharrydude]

@@oscar_2v yeee your content is great man i like it

[@alyssa3418]

❤️

[@WiseUpRiseUp42]

Seeing your guys Stangs compared to mine i need to step my game up i have some ideas 🤔😈

[@oscar_2v]

Make it happen brodie we love seeing those new edges fixed up 🔥🔥

[@ngbb3x__777]

What’s the bolt ons on the green one ? If you don’t mind me asking everything he has

[@renemonge7437]

Hahaha 2:42 what did he sayyy!!

[@oscar_2v]

He was trolling around that he would beat that whippled cobra 😂🔥

[@dsg2v]

What cams are they?

[@project_2v_]

Trickflow stage 2!🔥

[@samleo6784]

Where'd you get your rear bumper?

[@TechWizard28]

Does it have the bullitt intake?

[@kevins6661]

What are the wheels that are on the 2001 GT? I love the way they look

[@friendzoning]

I believe they might be aodhan

[@oscar_2v]

My last video be breaks down him exterior mods. But he rolling on Aodhan DSO5 💯🔥

[@kevins6661]

@@oscar_2v Thanks! I did go back and rewatched that video again!

[@oscar_2v]

@@kevins6661 Dope!! Appreciate it brotha 🙏🏽

[@brianboots266]

What color is your friend's car.

[@project_2v_]

Gulf Stream Aqua is the paint name

[@BucDaddy98]

What is the wheel specs on that GT?

[@canasians8783]

Can you tune stock ecu

[@JosephAStanley]

Why did he shift like it was 800hp car lol

[@hobbs0798]

I’m just curious what’s the exhaust setup on the Mach 1?

[@oscar_2v]

He has a bassani X pipe and straight piped 🔥💪🏽

[@crisrodriguez4778]

Whenever y’all are down for that run now 👀

[@oscar_2v]

let’s make it happen 👀🔥

[@Chase004]

Correct me if im wrong but if its a “full bolt on” how is only making 20-30 more hp then factory? Maybe my idea of full bolt on is different but i was jw

[@luisuribe5432]

It’s a 2v bro

[@Chase004]

Damn, thats rough just putting cams in my car adds about 65+ hp

[@jvirgil89]

@@Chase004 stock rwhp is around 225. So he's Gained around 55rwhp. Stock crank is 260 so puts him around 325 crank now. Depends on the dyno type, if he has 4.10 gears dyno numbers will fall shorter as well, wheel/tire combo play a factor as well. So he could be pushing even more. Also could be a safe tune. Lots of factors unknown.

[@josephr.8622]

@AlphaChadChase it depends on how aggressive the cams are where you need to upgrade the valvetrain heads therefore making more power, this one didn't give out a specific cam it could've been a hot rod cam that just bolts on & barely add huge hp numbers where as a bigger cam add a good amount of hp & improve top end, & also tuning, a good custom tune plays a huge factor, but honestly 3vs are just way better they're good on low end mid range, fbo & cams they're making 360+ whp pretty much stock coyote power which is insane for the money, 2vs are trash ngl but their bodystyle is nice maybe a 3v swap or 5.0 would be better off or boost

[@Westhelockpicker]

You're not sure if it has a cold air intake? Pop the hood before you say something stupid

[@josephr.8622]

Lmfao no way fbo & cams & it didn't even break 300 whp, that's why 3vs are way better torquey engine good on low to mid range, with just bolt ons, exhaust, cai+tune would put them just about 300 whp & fbo/cams they make 360+ whp pretty much gen 1 coyote power which is pretty insane, don't get me wrong sn95 new edge still looks nice but the 2vs are trash to waste money on for power mods, a good 3v or 5.0 swap would be better off or boost

[@Morax515]

Shit even the 5.0 pushrod can do better with bolt one and cams.

[@alfredocobra3460]

2v needs a better driver

[@RidinDirtyRollinBurnouts]

Lemme save you a 12 minute video and say no. I've pulled on cammed 2v in my bone stock mach 1

[@midnight347]

I'm a 4v guy for sure but a fbo cammed 2v done right can absolutely run with a stock mach 1 it'd prob be a drivers race you may have outdriven the guys you ran nobody ever factors this in and it's even more important if it's manual vs manual. You can literally beat faster cars just by being a better driver trust me I've done it countless times over the years. Driver mod is Def a real thing.

[@Bbc418]

Not if it has that cobra bumper on a GT cause it looks hideous 🤮🤢

[@mustang_headass]

Mach 1 was just a catback?

[@lifestyleraceing5468]

Wat cams he running

[@project_2v_]

Trickflow stage 2!🔥🔥

[@lifestyleraceing5468]

@@project_2v_ shit my 2v look like his when it was black but I have fat tires n diffrent wheels I see y’all a few times at the shows

[@swegyp3687]

🔥🔥🔥