Can-Am X3 Maverick Turbo Secondary Clutch Roller Replacement

[@Casperarizona]

You have to be kidding me!! This has to be one of the best videos I have ever seen on KZbin. The detail. Great. Thank You so much!!!

[@wKKnDwarriors]

Hi 👋 Thank You!! Glad our video was able reach you and help in anyway 🤗

[@timgutierrez8602]

I love the detail and the explanations you guys put into your videos. It is appreciated. Keep up the good work! I also have a jet boat and a CanAm w toy hauler. We're in Havasu all the time. We are also getting ready for off-roading season. All the local places (ie..0El Mirage) and multiple trips to Glamis. Hope to see you guys out there one day.

[@wKKnDwarriors]

Thanks for tuning in and providing us with your feedback! We appreciate it and if you do see us, feel free to wave/flag us down 🤗

[@YourOldDog]

Thanks for taking the time to make such a great video, I am pretty sure I can do this fix myself. I have a lathe and some Delrin and will make my own rollers,.

[@wKKnDwarriors]

Oh sweet, make extra seems like the rollers go out a lot. Thanks for taking the time to leave a comment!

[@prestonray3677]

Great video !

[@wKKnDwarriors]

Thank you!

[@ntwadumela374]

thank you for the detailed video and narration it helps!

[@wKKnDwarriors]

Thank you! Appreciate the support! Glad we were able to help

[@ronnyconstance3269]

This video is the best by far. Thank yall so much. Helps a lot.

[@wKKnDwarriors]

Thats great to hear! Thanks for your input and feedback! 😁

[@zachp4457]

Why are we hammering in the little black screw? Won't that destroy the threads thus making it impossible to change the rollers next go around?

[@wKKnDwarriors]

Seemed like the easiest way around getting it in. We did replace the rollers for a 2nd time with no issues

[@joekearney]

I just did my secondary rollers on my X3 and fully disassembled the clutch . Was a massive pain . I was wondering why it needed to be completely disassembled. Doing one at a time i suppose each pin keeps the helix from unclocking . A 4mm skinny neck socket works perfect for tapping the pin back in for roller reinstallation . I went with Cubic Dollar OffRoad Rollers.

[@wKKnDwarriors]

Oh man, well glad to know youre all fixed and back to shredding 🤙 Thats what really matters 😁

[@renedelrio8042]

great video ! Thank you both I'm about to inspect mine today after a huge 5 days in Glamis. I already ordered my Rollers.

[@wKKnDwarriors]

Thanks! Wow you must of had a great trip!

[@Offroadmavericks]

You guys have the best videos!

[@wKKnDwarriors]

Thanks Tony! Appreciate you taking the time to post a comment 🤗

[@rbeaulne]

Thank you... Before you changed the rollers, what was were the signs or issues?

[@wKKnDwarriors]

Hi, welcome to the channel. Before the roller replacement it made a pretty loud rattle noise, and the drive felt like it was stuck and we had to gas a bit more.

[@AngelLopez-fc8wf]

How is it that you have shock therapy stickers but you have different brand for springs ? This video is going to help me my rollers broke I seen other videos that show take in the hole clutch apart just to replace the rollers 😂

[@wKKnDwarriors]

We actually only have shock therapy valving and resevoirs. We had springs prior to the shock therapy work. Glad our video is able to help seems like the rollers commonly go bad

[@AngelLopez-fc8wf]

@@wKKnDwarriors well I just discovered it today actually hahaha was cleaning dusting the clutches when I saw it need to get it back on it’s wheels season is here lol you guys make good videos 👍🏼

[@wKKnDwarriors]

Thank you, appreciate the support! Wishing you a great shredding season 🤙

[@SergioHernandez-fu7zs]

How have the rollers been performing ?

[@wKKnDwarriors]

Hi 👋 they've been pretty solid, no issues 👌

[@xxMXMAN111xx]

I think my rollers just went out tonight. My machine wouldn’t go much when throttling. Basically the belt was spinning almost freely through the secondary. I noticed 2 out of the 3 rollers were gone, I’m assuming you had to use the gas more when yours went and it made a slight whining noise because the secondary wasn’t grabbing the belt as it should? Mine wasn’t tighten on the belt that’s when I noticed the rollers were shot. Also did you have to change anything with the helix?? Thanks! Have a good night

[@wKKnDwarriors]

Yeah there was a noise and more friction. Just changed the rollers did not touch the helix, but considering checking it out now that you mention it

[@xxMXMAN111xx]

@@wKKnDwarriors thanks for the reply! I might install them exactly how you did since it’s way easier. Possible helix damage was my only concern but I stopped using it as soon as I heard the noise, I have 2 out of 3 gone like you did. Are you still on the same set of rollers from this video?? If so I’d guess your helix is probably good to go man

[@wKKnDwarriors]

@@xxMXMAN111xx we actually changed the rollers out this past season. Def will need to check it

[@xxMXMAN111xx]

@@wKKnDwarriors oh okay gotcha yeah maybe check it out to see if there’s any damage. I’m waiting on my rollers in the mail! Hopefully be up and going by the weekend

[@wKKnDwarriors]

@@xxMXMAN111xx Def will do. Good luck and happy shredding season 🤙🤙

[@armandopadillajr.8550]

how did you rotate it to get the rollers to fit?

[@wKKnDwarriors]

The roller install started right around 10 min into video kzbin.info/www/bejne/aKjVqZ6kjtuHg5o&si=WaP2Yt8jSMLZ7AqM

[@andreszambranobejarano2916]

Hi when you put the new rollers in, as you are not disassembling, should these rollers need to spin freely or because these are still under pressure they don't spin?

[@wKKnDwarriors]

Hi correct its always under tension will not spin freely

[@antoinericci4499]

Salut tu a un claquement au démarrage à la fin de ta vidéo tu sais d’où ça vient ? Je te remercie car ça me le fait aussi à chaque démarrage et j’arrive pas à s’avoir pourquoi

[@wKKnDwarriors]

Hi yes we think its from the primary. We think it may be the weights rattling. Hope this helps.

[@antoinericci4499]

@@wKKnDwarriors je te remercie j’ai trouvé d’où ça claque tu doit avoir le même problème que moi

[@wKKnDwarriors]

Awesome, great news @@antoinericci4499

[@alfredoaa69]

How did you get the rollers in mine wont go in might have order wrong ones?

[@wKKnDwarriors]

Hi we had to buy the tool for it. But there are comments in this thread where someone was able to work around it.

[@omarzambrano3321]

Does anyone know why my belt doesn’t want to get tighten after I replaced it? Could it be my primary or secondary clutch? Any ideas? I even out the original belt and it still not tightening

[@wKKnDwarriors]

Hmmm...may be best to take it apart and reinspect everything. Maybe a washer sliped out

[@quadforce5470]

Thank you so much for this tutorial - it helps us a lot ☺️☺️☺️ greetings from Germany 😇

[@wKKnDwarriors]

Awesome! Glad this helps for you. 🤗 Thanks for tuning in!

[@davidlboss]

That rear tire carrier is very cool! Nice and low, I love it! Your other video showed some nice clean wiring, nice work! You should do a walk around video of the X3. I’m curious about the huge Intercooler, the rack and pinion, etc…

[@wKKnDwarriors]

Thanks! Well definitely work on adding more videos to the X3 playlist of our channel. Thanks for tuning in!

[@scottscott5301]

Thanks good video!

[@wKKnDwarriors]

Thank you! Appreciate the feedback 🤗

[@bernievargas6740]

I saw a video that disassemble the entire clutch, is that necessary?

[@wKKnDwarriors]

Hi we did not diassemble and was able to replace them with no issues.

[@cameronwhite1920]

Did you get a check engine light?

[@wKKnDwarriors]

I dont think we did. We only knew it was broken from all the noises.

[@seadooliveforlife2362]

Do you have this special tool for sale?

[@wKKnDwarriors]

Hi the tools can be found on amazon Can Am X3 Maverick Sport Defender G-Boost Clutch Rhino Roller Kit amzn.to/3m1njdf Dcp26 Can Am X3 Clutch Roller Pin Extractor Removal Tool amzn.to/3Ne3FqA

[@SpacecityAtv]

What you torque to?

[@wKKnDwarriors]

Hi we torqued it with 56ft lbs

[@mikemendez8665]

Why did you have to replace the rollers

[@wKKnDwarriors]

Hi they were broken to pieces. Clutch was no engaging.

[@sedelmaierranch21]

Did the rollers come with new washers

[@wKKnDwarriors]

Hi, it did not come with new washers. We used the same ones.

[@mru5170]

When you drive was it making lots of ugly noises

[@wKKnDwarriors]

Hi, yes it did. It sounded like grinding noises.

[@mru5170]

Dang i have just a basic maverick sport 2019 and it’s grinding and I took cover off and noticed my secondary is open putting no tension on the belt

[@wKKnDwarriors]

@@mru5170 Yeah similar to ours. No tension and it was stuck

[@Gorealaracer38]

@@mru5170 im about to change mine too,SAME RIG 19 ms 'base' model 1100 miles on it.#outdoorboys205youtube

[@Gorealaracer38]

@@wKKnDwarriors is the clutch tool ABSOLUTELY necessary? I dont wanna spend the $100 4 the tool if theres another way,rollers were only $60 lol.#outdoorboys205youtube

[@Gorealaracer38]

Didnt need the $100 tool,just 2 c-clamps and basic hand tools.#outdoorboys205youtube

[@wKKnDwarriors]

Cool thanks for the update. Glad you were able to find a way around it 🤗

[@Gorealaracer38]

@@wKKnDwarriors thank u! All info is good info imo.#outdoorboys205youtube

[@wKKnDwarriors]

@@Gorealaracer38 Agreed! Appreciate you sharing your updates. Will help a lot of peepz out 🤗