Can it Take a K26? - Episode 27

By jove I will eventually have a loadout of nothing but shotgun pistols...
Etsy Shop:
www.etsy.com/shop/CaptainXCommissions
Commission Inquiries:
[e-mail]
Facebook Page:
CaptainXavier
Mailing Address:
Chaylo Laurino
P.O. Box 111515
Tacoma, Wa 98411
Theme song source: archive.org/details/CarminaBu...
Alterations: spliced.
"The End"
Exzel Music Publishing (freemusicpublicdomain.com)
Licensed under Creative Commons: By Attribution 3.0
creativecommons.org/licenses/b...

[@WalcomS7]

And here I thought I liked Shotguns and Pistols.

[@mitchel7477]

Hi

[@badimaaa4a548]

*Shotgun gang* Seriously, if I draw a gun, 70% chance I'll draw a Shotgun.

[@zargax245]

Just toss the saw blade like a ninja star you'll never lose

[@CaptainXavier]

You know...I actually like that idea. I could put it in my melee loadout along with my half brick. :P

[@retromatt2281]

But don’t they make the mountable foam blades anyway? You could buy like 40 of these just for the blade like how coop bought so many rapidstrikes for the mags lol

[@grantdillon1083]

When you fired the gem for the first time the barrels moved forward. That may be why it didn’t fire well.

[@beretnarf]

The crosscut has a lot of potential to look like a sweet two shot, bladerunner-esque blaster.

[@CaptainXavier]

Indeed! I love the profile...just not the "junk"

[@johnshepherd6925]

That gem spring is absolutely perfect for nesting in a Reflex 6/AF Destroyer spring. I just did one last night. The Gem spring is also perfect for a Strongarm. Definitely gets a little more pop then the stock spring. I've been buying up Gems just for their springs 😂🤣😂

[@BaconCheesesteak]

I've been using Gem/Star springs to double up with stock Bigshock springs. Decent enough improvement for backyard play.

[@johnshepherd6925]

Do you put the Bigshock in the Gem or the Gem in the Bigshock?

[@BaconCheesesteak]

@@johnshepherd6925 You put the lime in the coconut. Lol Ok serious answer: I used the Gem or Star springs and put them into Bigshocks, since there are adapters available to fire various types of ammo. I’ve seen others use the Star’s 4-barrels as an absolver in other mods.

[@SynapticWyrm]

notofication squad i wait all day everyday for captain xavier

[@dnkspnk146]

order66 notification*

[@spotdavis3242]

Had to wait till after work to watch and can I say well worth the wait!

[@CaptainXavier]

:D

[@gabrielsokolaj8805]

great video! keep making them :) had to give some positivity

[@victordaraban4695]

There's no CapitanXavier without the Powerade

[@rzrider683]

You know, I have been thinking about this for a long time, but do you think you could take the crosscut saw and make it fire from eir, like a vortex disk?

[@calebengland77]

nice picture

[@pigfish99]

... this is such a brilliant idea, but then he would need to get more. XD

[@trextrap2140]

Lord RZRider I

[@alastair852]

Now that the Twinslice exist this idea sound ever better than before.

[@xtout]

Alastair yep

[@EDSKaR]

The gems barrel jumped out, there are specific lines in the shell that hold them in place, make sure you get that assembled correctly! Could you take the four barrel and cylinder from the Wizzard and combine it with the body and priming bar of the Gem? Take the saw blade, remove all the plastic from it and make it a thrown weapon.

[@timothydavies2783]

I am a simple boy and when i want to like I like

[@justanotheremail810]

esentually? i love these words you make. Great content as always!

[@kodenarmstrong3114]

Captain Xavier is the type of guy to ask someone if they can take a k26

[@finger1651]

I got my gem to take a double spring load and I rotated the barrel and covered it in epoxy to seal it and it’s a beast plus I made barrel plugs to single and double it but it works well!!!

[@sethspiers9027]

Yessss!!!!!!!! I've been waiting for another upload!😁

[@friskyobject4126]

Everett Pumpkin-head me oo

[@gamerbreadbaker]

“So, ladies and gentlemen, I’ve cut my thumb pretty significantly... so I am going to glue it shut.” You know that bandages exist, right??

[@CaptainXavier]

bandages will not stop the bleeding nearly as fast as super glue.

[@BryanWasHere89]

Love this concept. Shame half didn't work. Wonder if that Rebel Purse blaster thing would work. I want to someday have a shotgun pistol integrated under the barrel of another blaster.

[@alaeriia01]

Dude! Idea! Take a Dual-Strike, shove a K26 (or more) in there, and ditch the Elite ARs in order to get a shotgun that also shoots individual Mega darts!

[@CaptainXavier]

I have been meaning to do this. I was hoping the get it to fire the first two elites at once and then the third but I have not figured out if it is even possible. I may just go with your idea. The one issue is the size/shape/ It will not holster well.

[@alaeriia01]

Leg holster? The thing has a Longshot plunger tube; you can find some way to holster it.

[@nerfinatorrr9981]

I just did the wizard mod as you have done however I also took out the air restrictors by using a flat screw driver and hammer on the black piece attached to the barrel. one dart shoots better than the others but I need to try more types of darts to see which is best

[@derongeng1172]

Hey Cap, love your vids! Speaking of shotgun pistols, justajolt made a video some time ago about cutting accustrike darts into slugs and fitting them into frontloaders or any turreted blaster and make mini shotguns

[@CaptainXavier]

Yeah, you can always double load but that requires special, non-standard ammo, which I prefer to avoid.

[@derongeng1172]

Captain Xavier huh ok just thought you should know 😁

[@calebtebeest7425]

it was goodish

[@gcsanimations2327]

Awesome vid.

[@gcsanimations2327]

Can the speedlaod 6, snapfire and quick 16 take k26?

[@gcsanimations2327]

Can the Nerf Nitro take a k26?

[@CaptainXavier]

The Snap fire uses a tension spring, not a compression spring and the other two are reverse plunger so...probably not.

[@gcsanimations2327]

Okay, that makes sense

[@steg719]

YAYYY ANOTHER VIDEO

[@brypie202]

Glue stitched and keep on going awesome and would like to see your PvP build ideas sir

[@tatertot4410]

Me cuts finger calls 8 ambulances Captain cuts finger glues it

[@randomduder6692]

6:45 So basically it is a roughcut pistol?

[@alexprice9573]

good call on super gluing the cut. super glue was invented in WW1 as a cheaper easier alternative to stitches.

[@CaptainXavier]

Indeed. I got the idea from the movie Dog Soldiers. I have used it several times. when I cut myself. Much cheaper than getting stitches.

[@alexprice9573]

and it works better if you hate needles like me

[@Kaine777999]

I'm looking at that Wizard (the blaster, not the beadry man) and wondering if it'll take a Nightfinder/Firestrike integration. Hell if you could it might be interesting to alternate between firing 2 or 4 barrels. There's plenty of shell space, especially if you put an adult grip on it.

[@lastcaress439]

It Came From The Bin, a nerfy b movie starring captain xavier

[@aimfar7946]

tOp TeN FamOuS lAst WorDs: At number 1 we have: 'So I'll just glue it shut!'

[@ianbrindley2940]

Yay videos

[@user-gd9jz3it9o]

you and walcom, with your shotgun pistols

[@snowybanana02]

What kind of glue is best for vinyl tubing

[@Spaceraptorderp]

doublestrike ARs slide out when disassembled, but they only shotgun at a max 20-30 ft at best.

[@Wint20k]

great advice x. I always cut myself. I never knew glue worked

[@TeoHarlan]

It came from the bin! sounds like a Nerf horror story

[@CaptainXavier]

FROM THE BIN!! Dun dun duuuuuuun!

[@bkzander1622]

Gem: glue the barrel and plunger together. That would probably make it get some seal. Of course, resources are limited so you don't have to but hey. If you can try it.

[@bkzander1622]

Also in the gem, I saw the barrel pop out a little. It may have been my eyes screwing up again but maybe?

[@CaptainXavier]

I did glue them together. No joy. Just does not have enough power.

[@BreakYourMark]

mathing succsessfull

[@gairkarohncatarn4527]

Are there any blasters other than springers that benefit from heavier springs in the internals?

[@CaptainXavier]

...trying to figure out how to reply to this without sounding sarcastic. Not having any luck...

[@amiemallich3255]

Gairkarohn Bl'ese Some air-bladder blasters, I believe.

[@dleonidae]

Considering it's been almost a year since, you probably had this idea already, but looking at the Star without the barrels in, it looks like you can use the shell as a forward grip integration and put a nice flashlight into it. Also, would it be possible to get a Monday Mod on loosening solvent welds? I want to shotgun my Crosscut as well, but I'm not a big fan of caveman-ing the internals...

[@MrRimant]

Could the doublestrike be turned into a shotgun pistol while retaining its stock spring?

[@3Xnc]

Long story short, Found a Ultra-Tek Wizard, want to shoot 2 at a time. May I ask where you drilled the holes so i may get the same results before i upgrade spring and under mount it?

[@BlissBee]

I remember like 6 years ago i had 2 buzzbee gems and both of them evantually broke where the prime got tougher and tougher until one time i fired it and the handle completely flew off thank god i wasn't putting it in front of my face

[@NavySeabee333]

you need to try the night tek it will give you 3 shots of 2 or 2 shots of 3. the barrels are very good as they are tight throughout the full length and its pump action.

[@NavySeabee333]

unfortunately, its a lot of work and will require you to cannibalize 1 or 2 other night teks for a piece that goes on the plunger tube and integrate it on the shotgun version.

[@rabadabadoo491]

MEDIC!!!

[@williamgagne6374]

can the barrel-strike take a k26?

[@gorillaninja8813]

Back together

[@seanjackson2459]

you should make the saw its own attachment so it can go on a nerf rail

[@TheREALwymario]

I'm not well informed on the Wizard having only read one review where the blasters had manufacturing snafus. How good or bad is the Wizard? The rotating catch system obviously isn't great but other than that?

[@spiff590]

so who glues cut thumbs shut too?

[@dr.jex___]

What if you figured out a way that spinning the crosscut's blade assisted in the holstering of the blaster?

[@CaptainXavier]

That...might work?

[@omegawoomylol9964]

Plz make an electric sping blade fore the brainsaw or the crosscut

[@Pigness7]

add some Velcro to the cross cut so you can just stick it on your rig

[@hazard4349]

Do you have a buzzbee tetra strike?

[@Crowe0920]

I took a wizard plunger tube and put it inside of a star and aligned the holes and it fires all three darts about 40 feet with a spring upgrade

[@CaptainXavier]

Huh...I wonder why I am getting such poor range. I might have a leak somewhere.

[@Crowe0920]

Captain Xavier if you would like I could send you one after I found out how awesome these were I made probably too many

[@CaptainXavier]

Crowe0920 That would be awesome!

[@TheCatpirate]

Cap'n. I am here, and have an interesting idea. (Well, my dad does) A mechanical engineer build. You mash together a whole bunch of parts from different blasters into some kind of Frankenstein blaster.

[@CaptainXavier]

Are you not familiar with John's "Jankstrike" line. It is essentially exactly that.

[@TheCatpirate]

Captain Xavier I am not.

[@CaptainXavier]

Walcom has some videos on it. Search "Jankstrike"

[@joeofdoom]

I was wondering if you'd ever cut yourself during filming and then you did. Kudos on the superglue very manly.

[@leonbolger7590]

Have you seen justajolts shot gun pistols?

[@supahvaporeon]

Chaylo, did you plug the release holes on that Crosscut? If not, you are severely missing out on a lot of power from the K26. I managed to put two holes in my wall from the stock spring and a Maverick spring, so I can imagine a K26 would be doing better. If I ever get around to it, I'll send you my garbage Crosscut that has the putty already over all the junk on the right side of the blaster. I tried to make it "Mermaid" themed for the Rebellion contest on Reddit, but failed to make the paint job and "scales" in the putty clean enough for my standards.

[@CaptainXavier]

Yes, I plugged the holes.

[@KRcanondaisa]

Would it be possible to make a Triad into a shotgun pistol?

[@CaptainXavier]

I have heard you can...but the range is terrible.

[@KRcanondaisa]

Darn, thanks for telling me

[@robjohnson3476]

what if you used something to block one dart so only one goes into the chrono? that could let you test shotguns

[@CaptainXavier]

I have tried this, not worth the effort...especially since chrono readings don't mean much to me anyway...

[@kotikvtanke2349]

chewbacca gun

[@friskyobject4126]

I know you aren't open for commissions but I was wondering if you could take a look at this and see if it is doable. It is a Jyn urso blaster with Trustfire batteries with one of those long shot stocks attached. I would also want a Nerf blow-dart gun attached to the front for the sniper look. Also barrels brasses and a cool paint job. Oh yeah and a laser pointer made internal with wires made so it is turned on when the rev trigger is on. And and awesome galaxy paint job. According to my calculations it would be around 210 (without brass, couldn't find it).

[@themessenger1680]

Use his Email for commission inquiries :) its in the description and is for all thing commission wise :)

[@friskyobject4126]

I would but I want to know if this is possible to do.

[@littlebiglsteele4158]

FriskyObject it's possible

[@jackrutter6075]

do the x shot vigilante

[@DaRip74]

what about the double strike?

[@CaptainXavier]

It cannot take K26. But I hear that with a spring upgrade it makes a decent shotgun pistol. I have been meaning to try it.

[@amyjames6074]

bad xavier bad

[@sh2theadow738]

how did you wire the shoulder cannon to eir?

[@sh2theadow738]

to make it manually activated also

[@CaptainXavier]

I wired in a switch right below the main trigger. There is then a jack near the back of the gun that is wired to said switch. The shoulder blaster jacks into said jack allowing me to fire the shoulder blaster using the switch in EIR.

[@zer0-box585]

looks like that saw is not made of foam.... or peraps we have discovered that captain its bulnerable to foam? XDD

[@gorillaninja8813]

Hey captain sorry I haven't responded I don't know how to put the internals of a gaurdian crossbow

[@CaptainXavier]

It is a bit tricky. Can you send me a picture of the parts you are unsure of?

[@asukayoslik6446]

are you or walcom doing anything Friday or Saturday? im currently in the area and would love to play

[@CaptainXavier]

As a matter of fact we are having a War on Saturday!

[@asukayoslik6446]

do a quick video with details or such

[@asukayoslik6446]

?

[@CaptainXavier]

It is at Fort Borst in Centralia, WA. 11 am - 4:30

[@asukayoslik6446]

Captain Xavier unfortunately I don't think we'll be able to make it up that far this time for i had thought you guys were a bit closer to Vancouver lol

[@Cowmanbull9]

How about three mini darts?

[@CaptainXavier]

Worth a try I guess...

[@APR2kNSP1]

Do a dart zone special

[@SofaPop.]

Can a jolt take a K26?

[@CaptainXavier]

No

[@the_rustydoornob1164]

how did you cut ur thumb

[@CaptainXavier]

Piece of sharp plastic.

[@bardeliasnystyl1142]

Where do you buy your K26?

[@CaptainXavier]

McMaster-Carr

[@jasperburklin1672]

my father also uses super glue to get rid of his cats

[@CaptainXavier]

His cats? What does he do to the cats!? O.o

[@jasperburklin1672]

oops i ment cut

[@riffraffmike]

Can a catchspring take k26

[@thesalt8952]

Nick the nerf howitzer

[@user-gd9jz3it9o]

no

[@ROXYshark]

Captain Xavier are you going to endwar?

[@CaptainXavier]

+Clay The Animus Mudwing no

[@ROXYshark]

I heard it's going to be really big

[@rmet01]

Can I send you a couple pairs of motors for that can it take trustfires/imrs idea?

[@CaptainXavier]

Yes

[@rmet01]

Ok

[@prohunter6728]

Hey CA can you take a K-26 I wonder...

[@CaptainXavier]

(sigh) what episode 26. I went over this.

[@jiminator7696]

Why do top primed blasters exist they're tough for little to prime like when I had recon and modding them sucks cuz way harder to prime

[@christianbarnes8931]

hope ur thumb is ok

[@CaptainXavier]

It will be fine. :)

[@nicholastrombone9899]

Do I need energy drink and storm trooper candy despenser? ;)

[@CaptainXavier]

I am going to go with yes, yes I do need those things. :P

[@nicholastrombone9899]

OK thanks for humouring me love the vids man keep up the good work always amazing to watch.

[@aidangreenfield3374]

1000 views, no dislikes!!!!!!

[@aidancole7697]

Superglue on a cut? Why? I'm not judging but why?

[@CaptainXavier]

Because that is what super glue was invented for. And because getting stitches is time consuming and expensive.

[@Hario338]

I don't think you should seal yourself with superglue.

[@CaptainXavier]

Why? It has been used to treat injuries since at least eh Vietnam war and is still used by medics, EMT's and Hospitals today. It works, it is sterile, and it creates a waterproof barrier.

[@CalebDoesStuff]

Did he just glue his thumb shut?

[@CaptainXavier]

yes.

[@thefurry8649]

я люблю фенриса