Can't Believe What Rain-X Did To My WINDSHIELD!!

[@johnlopez4089]

As a truck driver for the last 18 years I can tell you rainX is a awesome product. I’ve driven thru many thunderstorms without even having to use the wipers. It’s also great if you have a shower with glass doors. Makes them WAY easier to clean. And keeps the water spots from forming 👍👍

[@markfenbers1329]

Yes, but Rain-X make a special product for shower doors. Same wonderful effect, though!

[@surfer8210]

@@markfenbers1329 Do you have a link to the shower door product…?

[@jofus3604]

Have u tried it on ur rear view mirrors, they stay clear and when they dry no sludge, especially on heated ones!

[@markfenbers1329]

@@jofus3604 Yes, I apply Rain-X on all the exterior glass including side mirrors and sunroof.

[@jessykareynolds2744]

Thanks didn't even think of that

[@noimagination99]

Yet another long-term user of Rain-X, nearly 40 years now! And I probably have a 30+ year old bottle in my garage too. I used to swear by it, loved it, and still do, but have gotten lazier! 😁 This video reminds me to get back to using it again, AND to use it on the shower door - Thanks to those that reminded me/all of us, of that great use!

[@dan7163]

I have been using rain since they started. Just bought a new bottle and found it is no longer effective. Just like spraying water in it. My old bottle is milky white and smells like rain . The new bottle is clear fluid and practically no smell at all. Seems rain is cutting it and putting out an inferior product now. So I will discontinue rainx and try the competition. Great job rainx.

[@catholic3dod790]

40 years??? I never heard of this product.

[@Mike-hu8yz]

@@catholic3dod790 you need to get out more

[@billb.5887]

Rain X Is the best. Several years ago I found my old bottle of rain x and applied it to my windshield on my 1989 S-10 blazer and it worked as if it was a new bottle. I later checked the date on the bottle and found it to be twenty some years old. The application to the windshield was done in early 2020 and a couple of days later I was driving in one hell of a thunderstorm without my windshield wipers being on and other cars pulled off of the road because they could not see where they were going. I believe in Rain X no matter how olde it is, the stuff WORKS ! ! ! ! ! ! ! ! (wish l still had my S-10 Blazer)

[@markfenbers1329]

I’m a decades long Rain-X user. Love the stuff! I have not had an issue with wiper blade skipping like you demonstrate. I’d try raising one wiper blade off the glass and see if the other skips. Do this on both sides. Secondly, it might have something to do with the car wax on the glass that got spread over to the Rain-X side by the blades. I’d wash the whole windshield with isopropyl alcohol, and clean the blades as well, then try again. Lastly, time to replace the blades.

[@RyshusMojo1]

Likewise, I discovered Rain-X 1980 or so. They also make wiper blades that work well.

[@a.barker7792]

Ive been using RainX 35 years now, since i got a sample bottle from Mario Andretti at Road America for letting him pet my dog. Never use my wipers at all. Only for snow and slush.

[@bigmacdaddy1234]

I tried Rain-X on my brand new car and the wiper blades skipped as well. Threw the Rain-X in the trash. Never again.

[@a.barker7792]

@michaelodonnell123 why did you need the wipers? You must not have applied it correctly. I never use my wipers at all, not even in heavy rain. When your moving the wind is enough to keep my window clean of moisture. The 1st time you get sprayed by a huge puddle when you have no reason to have wipers on. And you're blind for 2 seconds. You know why you need it.

[@bigmacdaddy1234]

@@a.barker7792 I used the wipers to remove a dusting of snow while I was driving on the highway. What alternative did I have?

[@upside2k]

I started using RainX about 30 years ago. My big test was a drive from Seattle to Santa Barbara on the I-5 freeway. I drove through many rain showers, some heavy, during the trip. My goal was to see if I could avoid turning my wipers on during the entire trip. I did not use my windshield wipers at all during the entire 1100 mile trip. This is a great product.

[@onusgumboot5565]

My sister used rain x thirty years ago on a car that had wipers that didn't work. That was in Missouri. We got rain so heavy sometimes visibility was pretty much zero. She swore by that stuff.

[@paulmartos7730]

I drove a Dodge Intrepid (a great car!) for 17 years and used nothing but RainX windshield washer fluid. If it was raining, as soon as I got above 30 MPH the water just beaded and rolled up my windshield. I rarely had to use wipers in the summer.

[@samuelsungstabtu7527]

I can second you on that - driving without turning the wiper on in the rain. And I live in tropical climate. Not advisable, but doable...

[@kennethz3366]

How long does last before you need to reapply rainx?

[@CARMENTHUNDERS]

I also have 30 plus year old rain x. It all works still. Here in Washington state is beyond important for safety as we get major rain. Extremely important to use. Helps keep windows clean so you can see. Meaning you live.

[@kirkwaggoner7573]

I'm another long time Rain X user and love how well it works. I have seen Rain X additive that you can put in regular washer fluid, Rain X washer fluid (with Rain X in it already) and Rain X anti-fog for the interior glass. I find that treating the glass and using the Rain X washer fluid gives me the longest lasting results.

[@Boss-mo3zf]

Use it on your headlights too , also your side windows and rear glass and mirrors. If you resist the urge to turn on wipers it last much longer and beads off beautifully at hiway speeds.

[@JuggaloNY]

I was going to say the same thing. What product specifically are you talking about? The "Nu Finish"?

[@JuggaloNY]

Also if you have the Rain X windshield wipers that reapplies the Rain-X when you do use your wipers. Just an FYI

[@weskirkland5850]

Only on Glass Headlights.

[@JuggaloNY]

@@weskirkland5850 okay thank you I've been trying to find this stuff that's in an orange bottle and it looked like that consistency I can't remember the name of it but a mechanic of mine wiped it on my plastic headlights and it cleared them right up never been able to find the product sense

[@JuggaloNY]

Bummed it's not this stuff. 😕

[@sirquack]

Definitely use Rain-X. One additional function I use it for is to help remove snow/ice from the windshield. When it gets cold her in the midwest, we often wake up with frost on the windows. Regular use of Rain-X helps to get that off the windshield a little easier.

[@WeirdOleHippy]

Ha! That is because the windshield is better without the wipers when you use this stuff.

[@YRR_J]

@@WeirdOleHippy It's because the glass surface becomes hydrofobic after the treatment. And as water/moisture tries to stick to the surface at freezing weather, it can do it only as in tiny droplets. When scraping the most sticky version of icing on the windshield, the difference between untreated and treated surfaces are just insane. Without it you may have to use a ton of force and a LOT of time. Whereas the treated surface doesn't need anything more than one handed light scrape and it's gone.

[@Mike-hu8yz]

Do you put it on hot?

[@todzilla09]

Love Rain-X! I use it on all of automotive and outdoor household glass. The windshield wiper skipping is due to the increased surface tension from the applied coatings. They will not skip when there is an adequate amount of water falling on the windshield. You will notice that a slower wiper setting works best with a windshield that has Rain-X applied. A slower wiper setting will also allow your application to last longer.

[@markkoh888]

I am experiencing the same skipping effect too. Its only goes away if I repolish my windscreen and remove the RainX coating.

[@DavidStrchld]

@@markkoh888 Same here. along with some loss of clarity over time (like months). I took some harsh cleaners to get that coating off and restore clarity. I think Gasoline was the one that finally worked. I now use the rainx wiper solution with silicon wiper blades and skip the bottle of rainx type concentrates and have much of the beading effect without the clouding

[@ssoffshore5111]

"The windshield wiper skipping is due to the increased surface tension from the applied coatings." Lower surface tension.

[@todzilla09]

@@markkoh888 Understand that Rain-X was originally marketed as the invisible windshield wiper. The idea was that you no longer need your wipers. Now that is an absolute bunch of BS. You still need your wipers but less often and a slower wiper setting because the Rain-X is shedding more water than an untreated windshield. The increased surface tension is because all of the small scratches and pits get filled in creating a smooth surface. The smooth surface sheds more water but increases surface resistance for your wipers. More surface area contact more resistance, not less. Kind like when you put slicks on your hot rod for a weekend at the dragway. More contact area more resistance equals quicker launch. What I found stopped the skipping was switching to a triple edge wiper blade.

[@sjsomething4936]

@@todzilla09 with a relatively recent application of these rain dispersants you actually can drive without using the wipers, especially in moderate to heavy rain. A light mist at slow speeds is more problematic as there’s little wind pressure on the beads of moisture to push them up the windshield (thus requiring wipers), and of course it’s not always possible to keep the windshield maintained with this stuff, so a car still has to have wipers. However, I take your point that the marketing was highly deceptive suggesting that wipers aren’t needed at all. Cheers

[@mercmush]

I’ve been using Rain-X on all of my cars since 1991. It’s a brilliant product. The harder it rains and the faster you drive the better it gets. I use it on my car’s lights too , front & rear. I’ve never had the wiper judder that you have. I clean my wiper blades with it too.

[@valuedhumanoid6574]

I use RainX on EVERYTHING I own. Especially my Cessna 172. And it's improved my visibility so much. And not just in flight. Morning dew is just as bad as rain when you're taxiing. But the real benefit is not beading water, but keeping bugs and bird crap and all other manner of junk sticking to the glass. What dies manage to stick is easily knocked off with just plain water out of a hose. Magic in a bottle!

[@johnhutchison9782]

Skyhawks are awesome aircraft!

[@brianbassett4379]

Congrats Pumpkin but I bet your incentive is the fact that you can make micro cents off other uninformed children with affiliate links. Total lack of integrity... KZbin: Do Not Recommend Channel

[@unclefart5527]

I understand it was developed for aircraft windscreens. Saw that 30 years ago when it was Repcon.

[@wuppercruiser]

hi. rainx is awesome. did you know that you can also use it inside to prevent fogging? 😉

[@flybobbie1449]

Do you use "for plastic" version?

[@bemame0119]

I grew up in Vermont not only does Rain X work amazing on rain but in a good nasty cold snow storm it is amazing!!! I still use it to this day in California.

[@JetsetJive7]

The wiper skipping is because of the absence of water on the windscreen surface for the wiper to glide over. If your wipers are well worn, the skipping is reduced or disappears. But that leaves very fine misty beads on the surface which will evaporate very fast, so not much of an issue. the other problem with beads is during night driving, the beads act as tiny lenses and can be distracting whilst driving. I also use this on my mobile phone screen, makes it really smooth and reduces finger prints. great product!

[@robertthomas5906]

An improvement is to use denatured alcohol on the wiper blade with a rag you don't care about. It'll be filthy with oils. Might want to use gloves. It's usually that filthy. That's why it skips. This will help extend blade life. Finish up with Windex on the glass to get the rest of the stuff off. Then put the rainx on the glass, wd-40 on the blade. Use wd-40 for what it was invented for.

[@simonruszczak5563]

No, it's because the wiper blades are not in line with the wiper arms. The blade at the top of the windscreen was being dragged but the blade at the bottom was being pushed.

[@skylined5534]

Never thought to use it on my phone screen, genius suggestion!

[@bobbrown1603]

@@robertthomas5906 Not a good idea to use Windex on auto glass. It contains ammonia which will attack the rubber mounting seals at the window edges. Better to use a good quality windshield washer liquid like the stuff you pour into your windshield washer tank. No ammonia in that.

[@robertthomas5906]

​@@bobbrown1603 You're not bathing the glass in Windex. Spray it on, wipe it off. You'll be amazed at what comes off. They used to use similar stuff at full service stations 50 years ago. It never bothered the seals and I've never had any problems with the seals in over 40 years of doing that. The washer fluid is useless. Even when the wipers are moving it's still not taking the oils off. It's not designed to do that. It's designed to not freeze and get dirt off.

[@Musket33]

Been using Rain-X for 30 years. Works well on glass shower doors too! I occasionally do a deep clean of my windshield just to insure an even application of Rain-X. I prefer the regular bottle rather than the spray bottle however.

[@emilpilacikjr9597]

Figured it out! The skipping I mean. After many DIY videos of great folks about cleaning to avoid skipping, I found they did not work for very long or at all. New blades seemed to make a difference for a while but then it returns. Then blamo, I found a video that explained it. I tried it and it works!!! Wiper arm position. In other words, you bend the wiper arm, I use 2 adjustable wrenches on the arm in opposing movements to align the blade to be perpendicular to the glass. Running the blade when it is bias downward or upward on the glass surface will case skipping. Perpendicular or even closer then what you have, totaly changes and fixes skipping. I'll try to find and post the link to the video later. I'm driving and had to stop and comment. Hope this helps.

[@kinguin7]

This is very interesting and I'm gonna have to look at the angle of my wipers now...

[@flagmichael]

I remember watching that video - good stuff! IIRC the title was something about wiper blades making noise or working badly.

[@Krakondack]

I've seen such videos. But can you do it on a Toyota, where the wiper arm is boxed, all the way through? Seems impossible, without damaging the arm.

[@mghuertas]

Hi folks this happens to my chevy s10 and I was figuring out what happens i have to bend the wiper arm against the windshield to resolve the "skipping" area

[@pilot2020]

@Tom Jelinek this stuff leaves a wax residue on windshield that's why it skips I advise not to bend wipers because of this stuff as a mechanic we don't like this stuff and kills wiper blades and also don't use rainx washercfluid ether we constantly replace blades and washer nozzles squirters and hoses cause it clogs the squirters and hoses leave orange residue in lines .just do a ceramic coating or wax and clean it .a good ceramic coating will beed off the water.not the turtle wax stuff .but an Adam's ceramic spray or a high ceramic coating

[@mrc3458]

Good comparison. I'm a RainX user and have been for about 30 years. At one point on my old 95' Silverado when the wiper motor had problems, I went a year without wipers and only using RainX got me through several rainstorms with no problem.

[@richa.s9912]

Me too I have had 1978 American Motors Pacer Station wagon and using the Rain-X and my wipers motor quit working on my driver side and good thing that I used Rain-X for years during the ice storm and snow storm so easy to remove ice off windshield and doors glass and headlights and back glass and I bought several trucks over the years 84 Power Ram 50 little truck and 85 Chevy Silverado Blazer and 1994 Dodge Dakota Club Cab truck and 2008 Chevy Silverado truck and used it on camper shell was great on camper shell door glass when going through mud and ice storm and I can see where I'm backing up the trailer better.

[@dw3403]

The arms on my bmw got weak and I would notice when on the freeway they would lift. I bought some dumb looking things to put on the arms so they would be pushed down by the wind and rain x. Worked perfectly.

[@jayrowe6473]

I've used it since the 1970s, and I've even used the original old bottle that I found tucked away in an old box. Still works as well as it always did.

[@blacksquirrel4008]

Same, been buying it since 1972. Every time I put more on I think “why did I wait so long?”

[@lgoamity]

Same from early 80's... Probably have several bottles/versions of Rain-X (include an anti-fog from late 80's?) Spanning the last 30-40 years. As mentioned I too keep asking myself why I wait so long between applications. Now that is Winter here and I do get various forms of frost,ice, and/or snow... A few minutes deep cleaning my glass and applying some Rain-X will greatly reduce my time scraping the Windows. Anything that "sticks" had beaded up as a liquid so easily comes loose with a scraper and washer fluid/wiper blades also make quick work of things.

[@unclefart5527]

Originally called Repcon.

[@joeniederhofer2566]

My 9 year old Subaru still has the original wiper blades! I clean them regularly and treat them with pure silicone to keep them pliable. Also, I've recently been applying hybrid ceramic polish to the glass when I do the rest of the car (the directions say it's safe for glass). My wipers still clear rain with no streaking or chattering and i find that the ceramic coating helps keep the glass cleaner in the corners where the wipers don't reach.

[@russellmiller2256]

The skipping is because you taped the windscreen and left clear gaps between application test areas leaving a gap on the drivers side and a gap in the middle which is where it gets worse. The passenger side is far more inconsistent because of the different products used. Even new wipers would skip under those circumstances.

[@HAL-dm1eh]

That has 0% to do with clearly consistent space between each skip all the way across the windshield, not just some perceived gap in the middle.

[@paulwujek5208]

I use Aquapel which only needs to be applied once a year, whereas Rain-X must be applied many more times. Note: the directions for Aquapel suggest applying every 6 months, but I have never done that and it works fine for me for a whole year.

[@MickeyMishra]

I'll try it out. Thanks!!

[@germanshepherd13]

Aquapel doesn't last much longer than rain x and in many instances lasts less, plenty of testing on it

[@danlapierre5400]

In the 80’s I detailed vehicles on Long Island Ny. RainX was my go to and people were amazed. When I got into the FD I put it on our trucks windows and it worked great. Currently in Arizona and still using it. Never an issue or complaint.

[@GlennC789]

Very interesting. I've been using Rain-X since probably when that first bottle was actually manufactured and I've never noticed any difference in the product itself, but I have over the years learned how to use it better. I work it well into the glass but then immediately rinse it completely off. The layer that's bonded to the glass stays, but the layer that might cause some fogginess (main problem I hear with it) is rinsed off. You can use distilled water from a spray bottle if you want a perfect finish with no trouble, or just rinse and dry however you normally would. I do like to use of of those blue Scott shop towels to assist the rinsing. Works great and lasts several months. I also use Rain-X wiper fluid when I can find it (Wal-mart in my area doesn't seem to be carrying it right now) and it does help and is convenient, but just doing it by hand works great.

[@bbennett40]

The fogginess you mentioned is the reason I stopped trying to use this product. I may try again taking your comments into consideration.

[@lobsterbisque7567]

I've used clean newspaper soaked through with water to buff out the foginess after apllying rain-X. Wet newspaper is useful for lightly scrubbing glass surfaces without any abrasion. I use newspaper with rubbing alcohol to clean the glass before applying the base coat of Rain-x. Did it ths way for decades, and the rain-x lasts for months after aplication

[@Sushihunter250]

I've been using Rain-X for 40 years or more. I love the product. Where it really shines is on a boat windshield that is used in salt water. I used to run off the West Coast of Vancouver Island where it was pretty common to take a wave over the front windshield. With Rain-X, it clears pretty quick so you can see where you are going. Without it, you can often take a second wave before the water has cleared from the first wave making it really difficult to see where you are going or see any obstacles in the water. It also helps to prevent salt from sticking to the windshield.

[@xjet]

You should have tried it with the wipers on. It's been my experience that treated glass (with RainX or anything) produces a white misty effect as the very thin film of water left by the wiper blades beads-up. In this regard, untreated glass works better than treated glass when you're actually using the wipers. For this reason alone I don't use these products.

[@kinguin7]

It's often very humid where I live, and this seems like a problem those times.

[@IdahoPohTaToh]

I don't use it on my front windshield. Love it on all the rest.

[@timmueller1314]

The older Rain-x bottles said to apply it twice. Not because you needed two layers, but to make sure any areas of the windshield weren't missed. The windshield doesn't have to be super cleaned either. Just spray cleaner or soap and water is fine. There's alcohol in Rain-x. It acts as a carrier, which evaporates leaving the water repellent behind. It also cleans the glass very well. To get rid of the hase, after the second coat fully dries, just either mist or wipe on plain water and then fully wipe dry.

[@taoh780]

I used Rain-X between '00-'05 and I liked that water beads will glide off when travelling around 30mph but performance fades around 2-3 months. I read somewhere that silicone based coatings like Rain-X can be difficult to remove for a clean reapplication or trying different products. I don't remember experiencing wiper chatter, but maybe silicone doesn't interact very well with certain materials for windshield wipers and I might've been lucky. I went on to try Aquapel, which seemed more durable than Rain-X, but I had to be at speeds above 45mph to see water beads gliding off. Recently been using a ceramic coating and I find that it might be just as durable as Aquapel and it expels water at similar speeds.

[@deanevangelista6359]

Aquapel is great product.

[@jonhansen4745]

I used RainX for several years on all of my vehicle's windows. It always worked just as your demonstration shows. The one thing I didn't like about RainX was that after using my wipers for several times, there would be a glaze or smear on the windshield where the wipers swipe. I would then have to deglaze that area with rubbing compound before I could reapply more RainX or it would just get worse. I finally quit using it altogether. I've tried using other products like Meguires Ultimate Polish, which seemed to work nearly as well, & didn't get the smear from my wipers, but didn't last more than a couple of months on my windshields. A little over a year ago I finally tried a good ceramic coat on a new Honda that we bought & did the windows with that. 17,000 miles later the water still disappears from my windows like magic. I now use that ceramic coating on everything I own. Just my experience. Yours may vary.

[@Maybe-So]

ceramic coating brand?

[@flat6fever680]

Yes, which product?

[@pjonesmoody]

I stopped using rainX years ago for the same reason.

[@jonhansen4745]

@@Maybe-So The brand is DP ceramic paint sealant. It's the brand recommended by a friend of mine who is a professional detailer. It is relatively inexpensive compared to many others. I put 2 coats on our Honda Passport, 1 coat on our Forester, & 1 coat on my Cub Cadet Z Force mower & still have about 1/4 of a 12 oz. bottle left.

[@jman1057]

I remember about 30 years ago I used to Rain-X and was very unhappy with what it did to my windshield, I can't remember enough to give an explanation as to what it did exactly, but I know that what happened, I said I would never use Rain-X on my windshield again. Rain-X altered my windshield response to water in someway that was a negative and I wish I had not applied it to my windshield. I remember trying badly to get it off my windshield. That being said it might be a great product on the passenger windows, since passenger windows can't use wipers. For me nothing works better for rain on my windshield than a fresh pair of factory wiper blades.

[@EV-W-y4w]

Great test using different products. I have tried all as well and though rain-x is the best at removing water especially at highway speeds, the application is a real pain. After years of tinkering, I have found that using detailer clay to apply the rain-X and a thick microfiber towel to remove is the best method. The clay smooths the surface and rain-x really adheres to the glass. One negative is when a bug gets squashed, the white cloud dots do not go away without getting a microfiber cloth out and using some elbow grease..

[@rayclark8773]

I've used Rain-X since I first heard about it in the early 1980s. One of my driving pet peeves is having to use windshield wipers; I try to minimize that as much as possible. Rain-X keeps me from having to even turn them on more than 90% of the time when they might be needed. I have NEVER had the skipping issue shown and had never heard of that until now. Rain-X is also good for helping make it easier to clean dead bugs off the windshield.

[@moncorp1]

Use rain x wiper fluid. You don't have to worry about it wearing off that way. Just a little spray with your wiper fluid and viola, you keep it going.

[@MarkWickenheiser-yg7ny]

Yes I have been using it for at least 15 years, I LOVE this product! We even use it on the glass in our shower, never gets soap scum on the shower glass....

[@fredfox5145]

I use Rain-X and love it. I also use the washer fluid; it helps prolong the time between reapplying. I've never had an issue with the wipers. and at night you can't even tell it's raining. The stuff is great.

[@nickviet9274]

I installed my current Rain X wiper blades about 2 months ago.....and I love it! The product keeps my windshield clean and clear

[@michaelmedart7430]

I'm surprised that you couldn't see the difference between the old and the new Rain-X. Looks to me that the new Rain-X side had much less water adhering to the glass. Also, although I've been a fan of Rain-X for decades, about a year ago I started using a new glass cleaner: Invisible Glass. This stuff works just like Rain-X in preventing water from 'sticking' to the windshield--enough so that I don't have to have the wipers on when traveling down the road in the rain. It's also a phenomenal glass cleaner. It'd be interesting to do a side-by-side test with the Rain-X (new!) and Invisible Glass.

[@MrRoyPacheco]

I have used Rainex since 1980. A sure test came along when I was driving north to Canada preceding Hurricane Andrew. Did not have to use my wipers for 300 miles. My companion following me responded by asking if my wipers had failed! A superb product indeed!

[@Raymond-rr5iv]

Your video is perfectly timed. I also have a 30-year-old bottle of Rain-X and I was wondering if I needed to buy a new one.

[@hitardo]

9:23 The reason why this happens is the rubber of the windshield wiper being so hard, and as the windshield surface gets drier, the wiper start skipping. To avoid this - and solve it at your point - you need to apply some Rain-X to your windshield wipers, right after cleaning them. This way, the resistance between the two surfaces will be reduced, and avoid that horrible effect. I learned that the hard way, as this happened to me in the middle of a long rainy journey. I really like the improvement on visibility that Rain-X provides! I applied it on all my cars, and on my family cars as well.

[@mr.stonerUDX714]

been using rainX for 40 years back in the 80s I would pour a whole bottle of rain X in a gal of washer fluid but since rain X stole my Idea I just buy washer fluid with rain x in it

[@thinkingimpaired5663]

Me too, so much simpler to buy rain x windshield washer fluid.

[@missingremote4388]

Same here and that stuff will eat the clear coat paint

[@travdripdrip382]

You should sue

[@TheOminousVoidWispers]

@@missingremote4388 source? I've been useing rainx for 15 years with no issue.

[@celuiquipeut6527]

Rainx windshield washer is a must have. Use ti work in the road. In the north if Canada. Its simply the best thing ever in the snow. Since your cab is hot, it melts the snows. So your windshield is always cleaned. Its litterally magical.

[@peterrivney552]

Myself I use Rain ☔ X on all my windows as well as my lights keeps them cleaner and I do an extra application before winter to make it easier to scrape the ice and snow off the windows... Great job on the other brand testing I always wondered about the ceramic coating how it will work but did not want to try it in case it was to hard to remove... Great work 👍 PS. Another thing I do is wipe my wiper blades with rubbing alcohol to clean them as well the pollution takes it till on them as well as cuts down on the skipping... But before I apply the Rain-X I use a very fine steel wool and super clean my windows with dish soap the clean them again with a jug of window washer bug remover then dry the windows it helps make the rain X last a bit longer it seems like...

[@fivespeed42]

Never thought to use it on my headlamps... good call 👌

[@countmorbid3187]

I think rain-x is a must for safe highway driving. Since it lasts 6 to 12 months, depending on how many times you go to the carwash, i still use a bottle from 30-40 years ago. Still working fine. Have bought a new one but still on the old one. Incredible stuff ... Driving during the night in the dark no wipers needed.

[@JohnNorris411]

Warning on RainX windshield washer fluid. It is ok stuff but if you are going to use it, do not mix it with other washer fluids such as the standard blue stuff. Make sure your washer res tank is empty and even flush the line out with a couple cups of distilled water before filling it with RainX brand fluid, and make sure that is cleared out before you ever add any other fluid. I used RainX, was getting a little low, and stopped by the local auto parts store, they were out of RainX brand so I just got a bottle of the blue stuff. The next day my sprayers were not spraying, only sputtering a little. I found the 2 fluids had a chemical reaction and created a bunch of stringy sticky goo in the fluid that clogged the pump, lines, and sprayers. I had to take it all apart and clean everything out to get it working again.

[@xmradio11]

bummer

[@denisrozon8588]

been using rain x for more than 30 years. it is a fantastic product. in hard rain you see everybody pulling over on the side of the highway but you can keep on driving even without your wipers on .Also to prevent the wipers from skipping on the windshield ,you must add,at the time you apply rain-x to your windshield wash your wiper blades with soapy rag and then apply a generous amount of rain-x to the wiper blades using the rag you used to do the windshield. BEFORE i leave to drive to Florida from Canada, i always treat my windshield and side glass with RAIN-X .It even prevents the slushy snow from sticking to the glass. i also do my 2 side mirrors.I'm a retired mechanic.

[@YouNameItGaming]

RainX is just an amazing product, period. i used to have a process of cleaning windshields with 0000 steel wool to remove grime, tar, and bug material before purifying the glass with denatured alcohol before applying 2 coats of RainX concentrate, waiting about 10 minutes then buffing it off with a soft microfiber and the results were always jaw dropping from the shine on the glass and the way the fingertip glides across the surface (it's glass that feels like glass) to the way a bucket of water seems to just bounce off of it! but lately i've gotten lazy and started using Stoner's Invisible Glass Clean & Repel as you just spray it on and wipe it off with surprisingly similar results from about 5% of the effort. if you can get Stoner's products there, it might be worth pitting it against RainX with this same method of testing. P.S. great video as allways

[@ralphseifer5537]

I've used Rain-X for years, and it's miraculous in wet weather. However, most don't recognize how helpful it is at other times of the year. If you drive in warmer climates, with a lot of bugs hanging in the air, you'll find it it a breeze to clean them off the glass with virtually no elbow grease.

[@LilRedDog]

It is helpful when you just drove through 50 miles of cicadas dried to your windshield. Much easier to clean off.

[@TonyRule]

My only complaint with Rain-X is it increases the fogging (condensation) on the glass windshield in winter. Your wipers are chattering because the arms are not correctly adjusted. They need twisting so the blades flop to the correct side depending on the direction of travel - that is to say so they're dragged (drawn) across the windscreen, rather than pushed (like rake on motorcycle forks).

[@graysinclair6572]

You are correct! I spent about 4 years trying to deep clean and reapply Rain-X and the chatter would continue. Tried new blades and problem would eventually resurface. I asked countless people what the problem could be and no one could give me a valid reason. UNTIL, this KZbinr posted a video on doing exactly what you just mentioned. Bingo, problem solved! The rubber blade needs to be perpendicular to the glass or it will push as you mentioned and chatter. Thanks for pointing this out. 👍

[@mmac4047]

I use 1/2 kerosene in 4.5 gallons of water and car soap to wash vehicle top to bottom even engine bays - restores rubber paint on everything. No wax either.

[@bigmacdaddy1234]

His wipers were fine before the Rain X, so they do not need to be adjusted. I also tried Rain X on my brand new car the the wiper blades starting chattering as well.

[@TonyRule]

@@bigmacdaddy1234 That just means both of your wipers were maladjusted.

[@bigmacdaddy1234]

@@TonyRule Nope. They worked perfectly fine before the Rain-X. And after using vinegar and water to remove the Rain-X they worked perfect afterwards. No adjustments needed.

[@drunksaru]

Similar to many who don't like Rain-X I too am in that group. It will cause wiper issues, but also the thin film it leaves behind on days it's not raining will attract dust more and if you have really clear glass starting off, you'll see the slight haze from the product no matter how well you try to wipe it off because essentially, it's a chemical layer that repels water. after decades of trying different products, I personally am happy with cleaning with Carpro's Ceriglass and doing a sealant with Carpro HydrO2 and using silicone wiper blades. That combination will keep my glass looking absolutely amazing for a very long time. That said, I do have leftover Rain-X so I use that on the lens of the cameras on the vehicle. I just can't get rid of it as quickly as I want. Good to know Rain-X has the potential for lasting a long time. I also have a bottle of Fog-X which I used to use on my old vehicle but now just sitting on the shelf. haha

[@brettster3331]

Great video, thank you for showing this. You need to re-clean your windshield by scraping with a razor blade or some other method. I watched other You Tubes, to get all the stuck on minerals that you can feel but not really see then re-apply the new RainX, I also use RainX windshield washer fluid, works so well.

[@paulcurrie7828]

Use a clay bar for the ultimate clean glass

[@donotneed2250]

I've been applying car wax to the windows and paint since the 1970's. As an over-the-road driver I started out using Rain-X in 1992 and then went back to using car wax since it was cheaper in truckstops. Same result with each. I also applied it to the side windows and mirrors. I found that it works best at speeds of 35MPH and higher.

[@birdolla4441]

I used Rain-x from it debut in the 80's. I realized it caused the water to bead up and roll, allowing me to see past them instead of them spreading out and distorting the view. My favorite recollection was speeding up and watching those tiny beads of water start to quiver and dance. Then, approaching 80mph the quivering got faster and then at 87mph the beads just left the glass. It was just like the way the stars appeared on "Startrek" when they went hyperspace ... then all gone. Note: Using wipers messed up effectiveness big time, and no need anyway if freshly applied

[@germanshepherd13]

Rain x came out in the early 70s ,I remember my dad using it when I was around 6 or 7

[@DonPolmann]

I started using Rain-X as a teenager in the '70s and I still use it today! Absolutely the best enhancement to the driving experience you can get, other than a killer sound system. The best advice I have, and true satisfaction with Rain-X, is to follow the instructions and apply it 3 times on the windshield. Yes, THREE times each time you do it. You will not use wipers ever again (my least favorite part of driving). If you want a super clean windshield, use the Rain-X foam or spray glass cleaner and cotton cloth. Apply the Rain-X liberally with paper towel. Use enough to fog the glass - - make it cloudy and dry. Wait a minute or two, and polish off with CLEAN paper towel. Repeat application process twice again. Enjoy. By the way, clean inside of your windshield with Denatured Alcohol after warm water and spray cleaner and damp cloth. Denature alcohol dries very quickly. Use it to remove the plasticizers that evaporate from your car interior parts (vinyl, synthetic carpet, plastic parts, dash...) and make your glass yukked and greasy-like...otherwise the glass never gets clean. Thank me later.

[@mikeburnett7028]

Been using rain X for 40 years. Works best on my 34 Ford windshield because it’s more upright and catches more air. Don’t forget to use it on side glass and mirrors also, especially in winter to help keep ice from forming. Don’t forget to also apply to wiper blades, to keep them from freezing to windshield.

[@mrbjay5443]

I, too, have a bottle of Rain-X from circa 1990. it still works flawlessly and since I only use it in the Wintertime, it's a large bottle with a little left now. Yes, apply twice as directed. It's a fantastic product. I Hyperclean my windows as you instructed in your previous video using 0000 steel wool. Magnificent! THANKS AGAIN!

[@gjkozy]

Been using RainX for over 40 years, they even had a version that you mixed into you washer fluid, but that led to a thick buildup that smeared. The original RainX works great and used it on the rigs that I owned along with my personal vehicles. It doesn't last very long though.

[@mikep1772]

they now have washer fluid in rainx brand that works great

[@eddiec.2856]

I've been a Rain-X user for over 35 years both while driving over the road as a trucker, as a cabbie, then when I settled down and joined a volunteer fire department. It has kept our windows clear from rain, ice and snow for the 20+ years I was with them. I still use Rain-X in my car and my kids do as well, It has seen us thru many of miles of rain, ice, snow, and fog with great results. I think the new bottle edges out the older stuff just a bit, but that's better chemistry.

[@Andy1416]

Hey Jimmy I had the same problem on my truck, even with new blades installed. I also had a film on my window, when I used my wipers, just like you had. I opted to hyper-clean my windshield with 0000 steel wool and foaming glass cleaner, and never applied RainX again.

[@MrOlea]

me too - used it once in 1992 and never again.

[@danc2014]

Still OK on the windows without a blade. Does it chatter when wet? You should not use the wiper with no rain on the glass

[@bossmark5830]

Yup me too.

[@XxSoBeHaLLxX]

Incorrect application will cause this issue. I learned this myself after I started getting smearing on the windshield. What I found is that I missed the final wipe down on a one spot and when the wipers hit it, it just smeared it ... the final wipe down with a wet rag is the best way to go.

[@loopshackr]

I tried RainX right about the time your old bottle was new. When driving thru rain at night, using wipers, into oncoming headlights, every swipe of the wiper (up or down) would leave a zero-visibility white-out trail for about half of the cycle. The only cure was to remove the RainX as best as I could. I continued to use RainX on the other windows besides the front of the windshield, inside and out - helps prevent grime, and those pesky inside windshield stickers will peel right off when they're expired. Being half-blind in a night rainstorm was a no-go, though.

[@sm7091bs]

Using it since 1988. Very very great product. Pre cleaning the window with a high quality window cleaner is a must, and use a paper towel to apply it two or three times with circular motion. Repeating this once a month will do the job!!

[@camarokurt]

I just saw a video a couple weeks ago that said the main reason for wipers skipping / chattering is the angle of the blade on the glass. He twisted the wiper arms slightly and they were smooth after that.

[@YRR_J]

I've used Turtle Wax Clearvue. I found it's important to have the glass quite warm, and especially super clean and dry! Apply it at least two times with circular motion and let it dry to gray finish in between. Then wash with water and dry + buff with a kitchen roll. I think there was an instance where I tried to do the buffing with microfiber and the end result was worse. Also using other types of paper towels like a hand towel seemed to be less optimal. One can also treat the viper blades with the stuff, it potentially helps with skipping.

[@timothyvu7006]

I was told by windshield techs not to use water repellant on front windshields because it makes really hard to fix rock chips. The epoxy can't bond with the glass.

[@user-tb7rn1il3q]

I’ve had 1 rock chip in over a million miles of driving. It’s a non issue.

[@timothyvu7006]

@user-tb7rn1il3q it's a non-issue until it becomes an issue. If the chip doesn't phase you than you'd know that these glass coatings won't handle you turning on your wipers. Ask me how I know

[@ErikBrown1000]

Like many people have commented I've been using RainX for about 30 years. I haven't read through all the comments, so forgive me if this has been stated already, but in addition to the front windshield I use it on the back window and on my headlights. The headlight treatment is especially helpful during Winter and Spring months when a lot of crap gets thrown onto your car.

[@LilRedDog]

Rain-X specifically says not to us it on plastic, like headlight lenses.

[@d.e.b.b5788]

Haven't touched Rain X in over 30 years. When it first came out, yes, it worked well..... until about a week later, when even mild fog turned my windshield completely opaque! I had to keep the windshield wipers on constantly, or I wouldn't be able to see a thing. Turned out that with that product, you HAD TO keep using it every week, or you would wind up with the opaque window problem. NOT GOOD, Rain X. Never again.

[@davemartin4424]

Hi. Been using rainX for over 30 years . A must on a Peterbuilt running in the slush keeps the side windows clear. Wipers skip cuz there is no drap for them across the windshield. 😊

[@Eszentric]

I also have a tip on getting your wiper blades to last longer, as they have become quite expensive over the past 20 years. In the summer time I remove my wiper blade arms, rub a fine layer of silicone gel on the blades and store them in the trunk wrapped in a towel. I usually don't even think about them again for 3 to 4 months, but if I do get caught in the rain, it's not a big deal to go to the trunk, wipe the silicone off with the towel, and quickly snap them back onto the splined motor adaptor. I also etched a D on one of the arms to quickly identify it as the driver side, and P on the other for passenger. I don't want to have to think too much getting them on in a real hurry if the case should be. Anyway, I am going on my 6th year with the same wiper blades, and they look, feel and perform as good as new.

[@overlandzero]

I drove a full year with broken wipers. I used rain x. Awesome. Especially at highway speeds. Fantastic product.

[@slow_decay]

Love Rain-X. My only issue with it is at night when it's misting out and you drive under street lights, the beading causes a prism effect and blinding the driver as the whole windshield lights up. As far as the wipers, the arms are no longer parallel to the windshield causing the wipers not to me perpendicular to the glass. There is a video on how to bend the bar towards the middle to torque it the correct way so the edge of the blade hits correctly.

[@paulne1514]

Agree 100% about the prison effect. Had it on my work truck. Going down an interstate was fine, until I hit the city limits(Philly) with the overhead street lights. Then I couldn’t see a thing.

[@paulne1514]

Damm spell check! prisim

[@pies1772]

@@paulne1514 - WTF is "prisim"? WTF is "damm"? Oh, I know, they are proofs of your inability to spell simple words, that you're just a ... damn illiterate.

[@chaseychaseum5366]

I mix up and use Hydr02 on my vehicles. Great results and for motorcycles is AWESOME! Water runs off fast and makes leaf blower drying my bikes a snap! Works great on acrylic windshields, plastic parts and chrome as well. Will make those black bikes glisten like diamonds. Just apply in the shade and rinse quickly. If you let it set or don't rinse thoroughly and quickly, streaks will form. Lasts for months, too! Just wash it, rinse, spray Hydr02, rinse and blow dry. DONE!

[@ttinlv]

rain-x has cerami-x. If you perform a follow up, possibly half traditional rain-x and the other half with the cerami-x rain-x

[@billsmith3493]

I used to use Turtle Wax before Rain X was born, worked great. I swear by Rain X now and bought 30 of the trigger spray bottles at a Lowe's when they went to the bottle only low volume higher price scheme. I suggest running the heat if applying in fall and winter helps it haze faster. Also, if caught in rain before application remove as much water as you can before application. Don't be afraid to use it on your home windows as well, I do.

[@psoon04286]

Been a long time Rain-X user and evangelist. It works exactly as advertised. Hardly ever used the wipers except when its pouring and I’m driving less than 30mph. The coating lasts a lot longer if you avoid using the wipers, and visibility is still good since the water is not smeared

[@Big_Island_Boi]

I used to use Rain X on my fancy cars in the 1980's... it was kind of the hot new thing back then. Loved it. Used to be so amazed that I could drive on the freeway in any type of rain storm without using my wipers... and see perfectly clearly. The water just rolled right by. I don't know I stopped using it sometime in the 90s... but I still have some out the garage... I should pull it out and use it again.

[@macman231]

I've had the wiper skip also, you will have to use a very harsh chemical to get the rainx off if you do not like it, regular cleaners will NOT take it off and the skipping seems pretty common, ALSO at the very end of the vid you see that fog looking leftover after a wiper sweep, at night that causes an almost total white out of your view for a second or two on every wiper sweep and is not nice.

[@briannoble366]

Headlight glare at night in the rain is blinding and very dangerous

[@ramesparza9748]

Thank you for performing the test and showing the world that remix does outperform other so-called water resistant products I’m a big rain X fan have been since the first conception that I picked up a bottle back at 97 so it’s good to know the product I’ve been using still works just as well as it did back in 1997. Great job. Thank you for all your info. Have a great month.😎!

[@mathewhunt81]

I would guess that the wipers are catching more on the untreated parts of the glass and sliding smoothly where treated. That would cause a difference in noise and skipping. Please treat all of the windshield with Rain-X and let us know if that corrects the problem. Another great video Jimmy!

[@legionofanon]

thats a possibility, in my experience rainx when applied through the sprayers (so in theory an even application) the wipers will skip and haze when theres low water on the windshield. theyre the least noisy and clearest where theres a good rain on it, not a mist of rain

[@anth5189]

I would assume he wasn't having this issue before applying the coatings. So the wipers would be skipping over the "treated" parts not the untreated. It is probably leaving a residue. Which is not good.

[@xmradio11]

It doesn't take long for wipers to get a cupped edge from laying on the glass with the edge bent as they are in the off position. Especially in the heat of the summer. When they travel across the treated glass that cupped edge resists sliding and you will typically only see it chatter in one direction and not the other because of the direction of the cupped edge.

[@anth5189]

@@xmradio11 Yea, that would happen over time, not between the time the windshield was treated and untreated. It clearly was not happening before he applied the treatment. It had nothing to do with temperature or wear.

[@punker4Real]

@@xmradio11 Not on my 50 dollar wipers maybe on the dollar store ones

[@cbswm1957yaho]

I have used Rain-X for Decades (since it came out) and it has lived up to its advertisements. GREAT PRODUCT!!!

[@russelllutwyche5736]

I'm going to go against the grain here and say having used Rain-x once I would never use it again. Initially I was blown away by how it performs it was unbelievable and great fun when driving in rain. But I soon noticed it created a "bloom" over the windscreen adding a fogging effect and diminishing the clarity of the glass. Plus like you it started to affect the wiper blade performance which was annoying. Finally whilst the beading effect was impressive it too became an irritation particularly around the perimeter of the wiper blades. Truth is you don't want a beading effect rather you want a sheeting effect so the water sheets away and doesn't sit there. Not too long after applying it and living with it I wanted to revert to a normal windscreen and found removing it was a nightmare. Wouldn't go back to it ever. Whether the climate makes a difference I don't know, I live in England. Conclusion don't apply any product to you're windscreen just have good wiper blades

[@bradleypark1936]

Yes, yes, yes. Thank-you. Exactly my experience with Rain-X. I will never ever use it again. It becomes dangerous to drive at night in a light downpour or fog within a week of application. Oncoming headlights are a total blinder when they hit that bloom on your windscreen. I had to look out through parts of the windscreen that don't get wiped. Forget trying to clean it off the windscreen and replacing the wiper blades. Nothing removes it completely. New blades and a new windscreen were the only fix for me. Rain-X makes diesel on your screen seem a non-event. Gonna go one step further and suggest it should be banned.

[@SuperHooverdam]

I agree. We have fleet vehicles and almost everyone of them have a haze over them. They asked me to try everything I could find without damaging the windshield and it never would come off. It caused horrible night glare as well. And we live are in the US.

[@YarsRevenge67]

Agreed. I was a fan, but never again. People are clueless like i used to be

[@graemewiltshire312]

I had exactly the same experience, would never use it again.

[@dennissanvicente1576]

RainX is great for four season climate! Rain & muddy splashes sheet away clean. And in winter time, the hydrophobic RainX barrier will make the overnight snow/ice removal much easier

[@FLYRME]

The Army used RainX on Blackhawk windshields at least when In the 80’s. It worked great even at high speeds as long as you didn’t use the wipers. The problem was that in the field you kick up dirt at times and have to use the wipers and the RainX is history. Aircraft wipers are very strong.

[@yuuwhoo]

Prep: clean the windshield very good using a mild soapy water solution - use a single edge razor blade all over the windshield to get bugs or whatever else off and obviously wipe dry. I pour a little RainX on the area I'm going to do (I'm not tall enough to reach all the way across the windshield (-: ) rub it around with the newspaper and repeat - then a new piece of newspaper and rub off the haze. Repeat on the other side. Works for me. I do it twice a year. Four 0000 steel wool also shines the glass - NOT 0 or 00 or 000 BUT ONLY 0000. I've never scratched any glass using 4-0000 steel wool.

[@seeharvester]

Rain-X works good at first, but as it wears off, and you use your wipers again, there is a lot of streaking which makes seeing difficult. So you have to keep applying it all the time. At least that was my experience.

[@isaaclang6031]

Do a longevity test between the 2 rainx. You'll find the old rainx far outlasts the new stuff. Good thing about the new, spray on a wet windshield, wipe, and you're good to go.

[@timothyvu7006]

I've tried rain x on my back windshield and it'll last maybe a month. Aquapel will last longer maybe 3 months but the window will eventually get spotty. Cleaning your windows with any glass cleaner will make the spots even worse.

[@sahhull]

@@timothyvu7006 I get 3 to 4 months out of RainX

[@isaaclang6031]

I get 2 weeks to a month on the new rainx, up to 6 months on the old.

[@isaaclang6031]

There IS a difference between the 2 rainx. The new smells like alcohol, the old like a chemical watermelon odor.

[@timothyvu7006]

@@sahhull the problem I have is that morning dew will deposit dirt on the glass and just using water will leave streaks. I feel it's better to just polish your glass with steel wool and wash it when you wash your car. The time to prep the glass for rain x or any glass treatment is not worth it.

[@Hira9612]

Hey Jimmy, this seems to be an issue with Rain x in general. I had the same issue with mine where the wiper blades started skipping and my wiper blades were newly replaced (premium wipers) which cost me $60 for the pair. In the end, I hyper-cleaned my windshield and used griots garage window sealant and then the wiper blades stopped skipping. Seems to me like there is an issue with the formula that RainX uses.

[@martingarza3383]

Thru the years I have experienced that some wiper blades leave rubber marks on the windshield. I've used rain x for many years and will for many more.

[@ivanbit4012]

rain x is garbage! it will get you in real trouble in fog or light mist, you cannot see through your windshield.

[@jaybutler]

It is an issue with these glass sealants. They do cause wiper chatter. I love the way Rain-X beads and clears water, but I cannot stand that chatter. So, I stopped using Rain-X years ago.

[@workonitm8]

Tried Rain X once about 30 years ago and it made the wipers chatter and skip so bad I was afraid something was going to break. Thought that maybe I did something wrong, but your test confirmed what I already experienced. Don't think I'll try it again.

[@LastCallAgain]

Who would have guessed that the products specifically designed for glass would perform so much better? Great comparison. Impressive that the ancient RainX worked so well! I've been using it since my college roommate turned me on to it around 1990.

[@gungadinn]

If looking for best results, clean the windshield with iso-propyl alcohol before treating. This way any dirt and oils are removed. Long time RainX user, both windshield and washer fluid. I'll treat a pair of new wiper blades prior to being put into service. It's nice that when driving in a small rain event where the wipers on lowest speed is still to fast, RainX does the job.

[@sammilburn445]

im guessing the old rainx wont have been quite as good as the new one (at least thats what it looked like in the video, taking a bit longer to start beading) but im guessing thats something to do with changing formulas. its interesting to see the improvement bc often you see a new formula and it works the same or a bit worse

[@AgentOffice]

Yes I expected the old to work better

[@mrcryptozoic817]

Like a lot of fluids, Rainx degradation is probably dependent on where it's stored. If it's in your trunk in Phoenix it will age more quickly than in Telluride.

[@AgentOffice]

@@mrcryptozoic817 the SUV?

[@factChecker01]

It looked to me like the old Rain-X did not work quite as well as the new, but that difference was small compared to the other options.

[@shanedog9082]

I think the company got sued and had to change the formula. They concluded that rainx was a fake product and didn’t work!! That’s b.s. cuz I’ve used it for years before that and it worked great.

[@tinmole9032]

30 years ago had a car's wiper motor go out used Rain-X till I got it fixed.👍👍

[@martinswan9175]

I thinks it's because of the masked off parts, along with the different lubrication levels of each different product on your windshield. I bet one uniform coat of Rain-X I think will make that go away. Hopefully😋

[@1RoadGarage]

Awesome, thanks for the tip. As I watched the footage I thought about the tape and if that may be effecting the wipers at all. 🤷‍♂️

[@danc2014]

Why are the wipers of with no rain?

[@nigelnightmare4160]

Been using it for over 30yrs now. Still the best in my opinion. Treat the wiper rubbers with rain-x to stop the judder. Silicone wipers don't judder & don't need treating, + last a very long time.

[@Rondogardener]

I was once in a rainstorm that was so intense that the wipers were useless. Since I had put Rain-x on the windshield, I decided to turn the wipers off and just go with the Rain-X coating. I was elated to see that I could actually drive through that storm, at a reduced speed, with little problem. For an ordinary rain, though, the wipers and the Rain-X work better together.

[@jacksonlandstra9249]

This is a great video. I have used Rain-X for many years I even had your 1992 bottle of Rain-X. One thing I will add Rain-X is a great coating on the windshield for those early spring Frost's that you don't have to scrape This is a great side-by-side test, I have started using the same turtle Wax ceramic on my windshields. Moving away from the extra step of doing Rain-X. Your video proves Rain-X is Superior.

[@hakanyigit79]

It's so annoying when people test products and don't follow the instructions as stated. God damn it man, how hard is it to apply exactly as the manufacturer stated? 3mins in and this test is already null and void!

[@diverbob8]

Been using Rain-X since you had to add the concentrate to you windshield washer fluid. I really appreciate it when the washer fluid does not freeze !!

[@donsmith9478]

Since my trips out west and to Alaska 50 years ago, I have been using Rain-X on my vehicles. At highway speeds of 50 mph and higher, I do not need my wipers. I apply once every year or so. It's important to buff with a soft towel after the haze dries. Sometimes it may be necessary to repeat the buffing if it is wet in the early morning.

[@Rekmeyata]

I've used RainX for over 40 years, and it is a great product. The one thing I did notice with the new RainX vs the old one is that the new product doesn't last as long, the old product would last 90 days and even longer with some diminished capability as time went on, but the new RainX seems to last about 2 to 3 weeks with diminished capability as time went on; the other problem is standard windshield washer stuff strips off the new stuff way faster. Best to reapply either after every car wash or after about 2 weeks. If you use RainX windshield washer fluid refill instead of the other brands you can extend the life of how long the application of RainX will last. I also found that with the new RainX is if you apply 4 coats instead of 2, it will hold up longer. RainX wiper blades are supposed to deposit some stuff on the windshield to help create the water sheeting, but those wiper blades are pure junk, they started streaking after just 30 to 60 days of use, I tried those blades 3 times over the years and the result was always the same. RainX will make certain brands of blades skip on the windshield when the windshield is dry, you won't notice it if it's raining.

[@justplanefred]

I commented on the super clean video and I have seen better results over time from a sealer I mentioned. Like I said in the comments on the other video The Rain-X does work it just never worked for long for me. I figured most any way would work similarly to the product I now use instead of Rain-X and the morning dew would have super micro beads of water on it but after I opened the door, got in and shut the door the windshield was nearly clear of the moisture.

[@smojovi]

I started using the all weather wiper fluid with rainx about 10yrs ago. It keeps the glass constantly coated and the wipers (which skip over the buff-on rainx). The only drawback is the wiper fluid will clog up your filter in the fluid reservoir if you combine it with old school blue fluid.

[@matt3195]

Been using rain-X for decades. The little trick I learned to help prevent skipping and to extend the wiper blades life to clean the edge of the wiper blade using Armor All or any tire shine product. Hope this helps.

[@currentsitguy]

FWIW I put RainX onto the skylights on my house. I find it really helps throughout the year I find it help to keep the usual dust, dirt, and crud from sticking.

[@joshuaa3075]

I've used RainX for decades and noticed the bottles getting smaller. I tried the Scottie Kilmer suggestion of nu-finish once and thought the results were mediocre. Your test was correct.

[@JimVincitore]

Great video! Very cool! LOVE IT! I've used rainx since the 90's. I put it on all the windows and review mirrors too. I don't ever remember having the skipping, but I think if you put the rainx on the wipers, that will stop the skipping. I always do the wipers too. I usually apply it twice a year, fall and spring, before the rains. Sometimes more if I think about it. It comes in a spray bottle too. The spray makes it real easy to apply, but I think it wastes a lot...wear a mask when spraying. The spray is great, but I still prefer the liquid. I squirt the liquid on the windows, then rub it around with rubber gloves...so it's not wasted on a towel. After it dries, I just wash the car, then squeegee and hand towel the windows. That method works great. It only last 2-3 months, so if you don't like it, it washes off soon. I've driven 50 miles on the freeway in rain storms and never turned on the wipers, rainx works that great! You only need a teaspoon or less on each window.

[@lawtonheilman526]

I've been using Rain-X for decades, it is awesome! The people at Rain-X told me to go over your wiper blades with rain-X on a cloth and it will clean the road film off of them. I tried it and could not believe what came off of them.