Can You Drill a Hole With a Tin Can?

[@williambutler3204]

your can needs a hole on each side of the can, this will allow for air to cool the can so the heat from cutting does not get so hot, plus it helps for removing any piece you are cutting that may get stuck in the can, but pretty cool demonstration.

[@_Zoltan_]

Wow! Such a cool and creative idea! Also very cheap!

[@ShakeTheFuture]

Thank You! I am glad you like it.

[@ShakeTheFuture]

Last time I spent around 10 - 15 euros on a drill bit that I only used for 1 project...that project did not make it to KZbin. I could have bought hole saw drill bits on the internet, but I needed it the same day, so the only option was to buy it locally. I don’t mind to spend that kind of money on drill bits, but to honest, hole saw is not something I use very often. In this video, I wanted to see if something simple as tin can could replace an expensive hole saw.

[@srrufeleles9199]

Shake the Future eres español?

[@bijaymajhi6570]

Shake the Future oLy

[@audelioespinoza1934]

Very genius idea thx.

[@robertalbert5428]

Very cool!

[@wasanthawimaladharm]

You are the man 🤘💪👍

[@anon3837]

2:59 Why???

[@ShakeTheFuture]

It's my strange humor :)

[@LashingMrX01]

Jumped out of my skin XD

[@xcobyxzei]

I lolled at this comment

[@ShakeTheFuture]

Mee too :)

[@iawindowss4061]

Smoke on the water by Deep Purple in 1972 it was the first song I learned to play on the guitar

[@abobobo943]

very good idea. thanks

[@mackshinoda9969]

U make me remember young Fred Durst 😂🙏

[@mohammadmustafa722]

Nice innovation

[@ambirrai9169]

so good

[@vermalife85]

You gave me an idea. . God bless you

[@adilkhanazmi7692]

Wow what a idea

[@bigj43454]

STF University get it? Just playin. Great video man i never would have thought of that. I had to get two hole saws last year. Had I known this...

[@tinmgwin393]

Thank you so much

[@londontipton7780]

Thank you. I am trying to make holes in a can/plastic bowl to make noodles, but don’t know how. Thanks

[@FROSTINATOR]

So this actually worked pretty for well for plexiglass??

[@yaarkhan5294]

hi friend you are really having very very creative and helpful ideas... uptill now I have seen many of your tutorials based on PVC pipes...all were very helpful can you PLEASE make some more videos on PVC pipes but this time use big diameter PVC pipes and teach us some more ideas by using big pipes as well ... hope you will again show something very useful and best thanks a lot

[@setho1231]

When do we get the full versions of that cover

[@joaomendespereirafilho5117]

Cada ideia melhor do que outras

[@JAYTEEAU]

Great work. Loved it. Cheers, JAYTEE

[@ShakeTheFuture]

Thank You!

[@javilarg]

Funny, interesting, dangerous 🤩

[@darmawandesign7820]

Creative

[@FusionDeveloper]

Great! I wish I had found this video before buying Spade bits, which are horrible for plastic.

[@boredmoroccan2401]

That last one made laugh 😂

[@widebandrecords902]

Whole lotta smoke. Yea.. nice

[@user-dn9vd9xg9p]

They make can openers now that cuts leaving no burs on the can or lid.

[@kojer315]

woooooow that's perfect

[@ShakeTheFuture]

Thank You!

[@gertkriel5764]

Great video as always man Thanks for the hack Ps got any studies hacks I'm currently studying to get into university got any tips to make studying a little bit easier?

[@ShakeTheFuture]

Thank You Gert! Honestly I don't have any tips on studying. It's something I always struggled to do. Now when I am not forced to study, I enjoy it more...maybe because I can learn about the things I like.

[@philippe-lebel]

You should try to "glue" a saw around the edge of the can.

[@cdoublejj]

your speech is quiet but ,your music is blew the speakers out of the tv in to outter space

[@pheenix42]

Try using a piece of metal conduit sometime with teeth filed into it. Works pretty well if you make the teeth correctly.

[@劉建展]

唉唷唉唷

[@lakhdartemagoult2370]

i want to drill a big hole in a hard wood how can i do that ?

[@tanmaykhanna5807]

Best way to save money

[@ShakeTheFuture]

Thanks!

[@whitefeather5629]

Only if I were 50 miles from town. It takes longer to do what you did than it would to heat the can and melt through thin plastic and trim it.

[@ShakeTheFuture]

I did not mention it in the video, but it took me around 15 minutes to make it + you can use it a few times before throwing it away. Heating the can is also a good idea. Cheers!

[@FusionDeveloper]

I don't like burning plastic.

[@not_herobrine3752]

inexpensive burnout machine

[@frikkiesmit2695]

If a magnet sticks to it... Its steel not tin

[@nuwbers]

Yes

[@ShakeTheFuture]

Yes Indeed!

[@Grizzly_Lab]

Nice idea and #spoiler unexpected 😱😂😂

[@ShakeTheFuture]

Thank You Grizzly!

[@HassanRagheb]

THANKS

[@RonLarhz]

When u dont have those other tools to even make one....

[@farvision]

Of course you CAN.

[@ShakeTheFuture]

Yes, you can do it with a can

[@dekurvajo]

For 15 euro you can buy a set of bits. Those are not super high quality, but reliable for DIY job. And because its a set, you will see which diameter is what you use the most.

[@motelman6036]

All fun and games until you eat popcorn out of that plastic bowl!!

[@coondogtheman]

Over here we call those hole saws, like for cutting a hole for a doorknob or a dryer vent. Nice taste in music, smoke on the water. What else do you like to listen to?

[@ShakeTheFuture]

Thank You! Oh, I listen a little bit of everything. From Led Zeppelin to Above and Beyond.

[@coondogtheman]

Same here. do you have any favorite movie actors?

[@risunokairu]

It didn't cut a hole in the plastic it friction melted the plastic. That's why the wood smoked.

[@ravenlorans]

Always Keep the Receipt. Take the Hole Bit Back when done drilling all your holes. This is a Great Idea and works in a pinch for Light Duty. About the only reason why I think you had a hard time going through the Particle Board was because you didn't sharpen the teeth you made. Won't stay sharp for long but will cut down on the burning and smoke from being completely dull (metal too soft to hold a edge for too long). I Guess if you didn't own a Dremel, you could use a Hacksaw and there fore this would be a "Hack" and putting the word "Hack" in the title would actually be one of the Few Times it gets used Correctly and Fittingly :)

[@ShakeTheFuture]

Yes, i could have done a better job in sharpening it. Thank You for the suggestion.

[@monochromatic_monkey2439]

btw where are you from?

[@MavideDosconi]

SPAIN

[@SurajGondkar]

Mavide D'Osconi Did you like despicito?

[@ShakeTheFuture]

I am from Latvia, but I live in Spain.

[@anakindonesia888]

👍👍😁

[@evren.builds]

2:59 *SUPRISE DEEP PURPLE*

[@ShakeTheFuture]

Oh Yeah!

[@wilsonjayasundara3608]

Can i drill metal

[@i.g.noreme825]

Are you tempting me to make a smoke machine with this?

[@ShakeTheFuture]

It was not the plan 😀

[@scootergreen3]

Good deal for people like me I'm not rich. You better wear gloves while cutting with that sharp can your fingers are very close to it. You don't want to injure them.

[@carlcarl5306]

Pretty impressive for a tin can. However the product may have been better if he offset the teeth like on a real blade.

[@carlosgonzalezponce5187]

Buena idea, Hubieras entresacado los dientes para probar en madera

[@SeriousDIMA]

Возьму на заметку

[@shereef131]

ممتاز ممتاز

[@trapp7763]

I drilled a hole with a banana

[@NBGTFO]

I prefer to use an actual hole saw.

[@richardplester]

Think about your health and safety guys PLEASE. Use low sugar/salt beans👍

[@ShepherdsChapelonYT]

Let's turn to God Let's repent and ask for forgiveness Let's study God's word and thank God for sending Jesus and all He's is done Thank you God! Shepherdschapelcom Theseasonorg explains the whole Bible God bless

[@ambergonzalez7807]

Wat if ur trying to cut a coconut 😕

[@ЕвгенийОсадчий-р3ф]

У тебя такое количество электроинструмента, и ты блять, придумал сделать из консервной банки коронку? ты превысил все возможные технико-экономические показатели почти 10 раз, вместо того чтобы пойти и купить корончатое сверло в любом магазине... ну или хотя бы циркуль использовал бы...

[@tintinzerreitug2686]

your fingers are really too close ! Once I've cut my hand very close to veins with a professional drill because the drill broked while turning to make the hole.

[@ShakeTheFuture]

Note taken, thanks for commenting!

[@novikovmax8763]

Так а ты знаешь из-за чего дым идёт у твоего "произведения" ? И почему на синем тазу было отчетливо видно распавленный пластик. Потому что твоя хрень режет трением. Фигня это всё

[@ShakeTheFuture]

Thanks for the feedback!Yes, I could have sharpened the teeth better to minimize the friction. It might be useless for some people, but it works very good for me. I don't care if the hole was cut with the friction or not, what matters is the result. Cheers!

[@wunderbread7793]

Lol #6

[@markwright4923]

Hmm l

[@Jstar7777]

100th comment

[@mgdiaz2158]

Just buy a hole saw for God's sake, they're cheap enough.

[@FusionDeveloper]

If you hate DIY tutorial videos do much, then why did you watch this video? Many times DIY concepts can transfer to other skill sets for problem solving unrelated problems.