Cancer ms: 3d printed arduino humanoid robot for beginners.

[@MatsMatsuo]

Ive been always interested in those humanoid walking/fighting robots, since I was a kid. It was one of the reasons that made me pursue my Control Engineer degree, now that i have a better understanding of eletronics i was searching on youtube if I could finding any sort of data to help me with the first steps. It took me a while but i finally found the perfect chanel, thank you very much for your work!

[@ashutoshdash1955]

Great design I will sure try this ... One question which screw u used M2 ? Of what dimensions actually I am getting many results so dimensions will be helpful. Thx

[@JohnDoe-yh9ll]

The piece at 1:01 is missing from the stl files, can you please put it up when you get the time? Thank you.

[@tangwoonthai]

Re-download the file and look for lower body. Thanks for the notice.

[@JohnDoe-yh9ll]

@@tangwoonthai no problem, thank you too.

[@brayanmoya7947]

en los archivos están mal algunas piezas

[@MuminKoykiran]

Are you going to upload video that robot is moving with sg90 and motor controller ?

[@tangwoonthai]

I do made one with ts90a servo(lower spec than sg90), kzbin.info/www/bejne/oKXJenuvqcqYY5I ,but those plastic gear break too easily, so, I rather using mg90s even though it a bit heavier.

[@ashutoshdash1955]

Karkinos ss I will try this but right now I will go for cancer because mg996 will cost me more than expected..

[@tangwoonthai]

"Diymore" Mg996r will be like usd$3 /pieces.

[@ashutoshdash1955]

Like M2 screw 8 mm ?

[@tangwoonthai]

M2 6mm 8mm 10mm 12mm 16mm, seen the DM mg90s is very expensive now, almost same as DM Mg996r, You can try Karkinos SS, it's bigger and tougher, although it cost eur 10 for the 3d file, but it's screwless designed, the money you save for the screws should cover it.

[@bayufajar5536]

Can you teach me how to program multi servo?.

[@tangwoonthai]

I'm using the source code from robojax.com/learn/arduino/?vid=robojax_ESP32_Servo-1

[@JohnDoe-yh9ll]

This is so awesome, thank you so much.

[@tangwoonthai]

You're welcome.

[@toniavazquez5819]

Now this is another level.

[@jessicarojas4279]

Dude your right this is so cool

[@jessicarojas4279]

Keep it up.

[@toniavazquez5819]

Omg he has so many real robots

[@JohnDoe-yh9ll]

Did you use m2 screws?

[@tangwoonthai]

Yes

[@JohnDoe-yh9ll]

@@tangwoonthai thanks

[@JohnDoe-yh9ll]

Does blender let you make step. File?

[@tangwoonthai]

No, it not.

[@JohnDoe-yh9ll]

@@tangwoonthai thanks, its ok i will download blender. I didn't know blender was free.

[@tangwoonthai]

Yes, it free, and very easy to learn.

[@tangwoonthai]

I saw you comment asking for the picture of MOD servo at notifications , but couldn't find it in comment section, so i put it here, drive.google.com/file/d/1eX2y3Zh_6lRMFmxA6-E5EJU3ezqsqf9T/view?usp=drivesdk, but I not sure the servo you got are same as my, better watch where the motor circuits go before you cut it. Of course, it won't break even if you connect the terminal opposite, just reverse it when malfunction.

[@khabil_Blat]

​@@tangwoonthaihello, I want to assemble this robot, I really liked it, what details do you need? fees or something else?

[@hectorpena1119]

Very good

[@abuhanzala6926]

Impressed, Subscribed 👍, It's my dream to make my own Humanoid Robot, incase if u can guide , I'll be very thankful to you 😊

[@cutthroat3976]

Nice😎

[@anthonyvillanueva4500]

like like good

[@3LP1TCHUL4]

pelo título é um robo que dá cancer

[@toniavazquez5819]

This is a real robot

[@olivier671988]

Yes ! good work :)

[@jessicarojas4279]

Oh my jesus