Caravan 3.0 Crank And Camshaft Seals Replacment.

Check out My Amazon Auto Accessories Store! Lets make that Weekend job less Painful!
www.amazon.com...
Nathan is a participant in the Amazon Influencer Program. Your support is appreciated!
🔻Nathan's DIY Tools And Parts:
1. DEWALT Tools Set (192 Piece): amzn.to/2K04XZ42
2. Basic Mechanic Tool Set: amzn.to/2tEr6Ce
3. Professional Socket Set: amzn.to/2Bzmccg
4. Ratcheting Wrench Set: amzn.to/2BQjj8A
5. No Charging Required Car Jump Starter: amzn.to/2CthnUU
6. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
7. Uniteco 1/2" Cordless Impact Wrench Kit, 18V Battery: amzn.to/2LxKVG
8. HD Nitrile Gloves: amzn.to/2KpGBaG
9. Fast Orange Smooth Lotion Hand Cleaner: amzn.to/2K0RCQ9
10. Mechanic Shop Towels: amzn.to/2JZuMIL
11. High 6000 Lumen LED Work Headlight: amzn.to/2ImLQ8i

[@bigman3534]

God bless this man, it's been carrying me through my dodge shadow build.

[@markdoss1832]

EXCELLENT job of showing the procedure for getting at everything on that side of the engine! Great detail and clear explanation of each step, and why things need to be done the way you showed it. (Thanks!)

[@FixingWithPassion]

Thanks! That was a job!

[@phillippardo5712]

You are the man! That was a hell of a lot of work!

[@FixingWithPassion]

Nice!!

[@Feedback4Utoday]

Excellent video. Thank you!

[@tannermiller2465]

Where did you get the replacement seal for the front crankshaft?

[@derekthetoolguy9533]

should have used penetrating spray or used a small torch also use a hammer to tap the bolt to help break it up I would have never just went at it like you but shit happens I guess I was the engine guy at a junk yard and I had to remove ac pumps and every thing else off the engines to be sold separate I learned a lot as I had no help and just got turned loose

[@stevenbuell5387]

Best way to learn i say hey

[@derekthetoolguy9533]

you didn't have to take all that off but thanks for video I was worried how to take the crank bolt off but I got a cordless matco impact and every other tool known to man it seams good thing I collect tools got all snap on and other truck stuff it saves so much money doing your own repair people are just lazy when it comes to repair working on cars isn't all that hard if you got the right tools and patience

[@FixingWithPassion]

Derek Allison So true.

[@bobbycoakachee97]

yes excellent video thank you

[@FixingWithPassion]

Sweet!~

[@abuiso]

thank you

[@FixingWithPassion]

;D

[@vinloy23]

Never had a problem with the belt/s slipping on my 3.0 V6

[@sneakapeek2577]

did you ever change the trans axle seal? ... mine is leaking ... thanks for vid.

[@FixingWithPassion]

+sneak a peek Yea I did. It wasn't to bad to do.

[@sneakapeek2577]

could you give me any quick tips on that .. i'm thinkin about that axle also , after i finish the crank...again thats alot for first vid!

[@FixingWithPassion]

+sneak a peek You mean your want to fix both axle seals and the rear main crank or front seal that goes on the front crank?

[@sneakapeek2577]

both axle seals and rear main .. i think rear main may be impossible for me... but mostly just the drive axle seals.. thanks.

[@FixingWithPassion]

+sneak a peek Passenger side is pretty easy to do just pull the axal but the driver side is a bitch. No room to get into it. I did one time do the driver side by taking out the little bolts out of the housing and used a little sharp chisel and tapped it out with a hammer and knocked out the seal that way . But you might have to take out the side tranny mount big bolt to let the motor and tranny have some wiggle room. It can be done.

[@Chris-go9ti]

why didnt you do the water pump too?

[@FixingWithPassion]

It was replaced 20,000 earlier miles before I did this job.

[@Chris-go9ti]

TVWXMAN32 and still stuff broke? Maybe I don't want to do this myself.

[@jefferywarburton2116]

chris smith the ac compresser is in a place that you could check it out to see how stuck your bolts are before trying the whole job