Carbon Fairing Brackets Build - ZX6R Build PT. 12

[@85ddog]

this is do amazing. wish I had the talent to make some for my 04 zx6r

[@paolonieri473]

Thank you ! Would be interesting to see how you manage the overlapping of the layers

[@zrcarbon9937]

Thanks mate! I’ll take a note and I will include that in one of my videos 🛠️🤘

[@paolonieri473]

🙏

[@ediroks]

Another great work!

[@jasonroberts4029]

Exactly what I needed! Thanks!

[@zrcarbon9937]

I’m glad you found it useful 🛠️🤘

[@jeanfrancoispoivre4438]

Magnifique 😊

[@zrcarbon9937]

Thanks 🙏 🛠️🤘

[@harunjuliansyah2414]

Lama baru nonton lgi ni chanel bro, sukses selalu my from Indonesia

[@zrcarbon9937]

Thanks for watching again!!! 🏍️🛠️🤘

[@hatima6068]

Make Ducati wings pleaseeeee

[@zrcarbon9937]

I will make wings for my bike but those will be custom made wings 🛠️🤘

[@hatima6068]

@ something like superlegerra v4?

[@SirSlyBird]

Tanks for sharing your project. Lots of useful info in all your videos. Hope I can do a good job like you. 👍

[@zrcarbon9937]

Thanks so much for the compliment and thanks for watching! I’m sure you’ll be fine. Only the first step is difficult 🛠️🤘

[@LC4Driver]

Again - awesome work done here ! Thank you for taking us with you through this process. Have you been thinking of using Screws in a different colour (black for example), so the carbon-Finish isn‘t disturbed like with the original steel-screws ? And what are your plans for the tank ?

[@zrcarbon9937]

Many thanks for the compliment! I thought about it yes, but I quite like the stainless steel bolts and washers on the fairing. I would like to make a carbon fiber tank. Also planning to do just a carbon tank cover. Never done those before. Will be a good learning experience for me 🏍️🛠️🤘

[@LC4Driver]

@ So things remain exciting on your channel - thank you so much for having us with you ! 🙏🏽

[@22zulu]

are you going to clear coat or polish the side and front fairings? And yes, the video is very insightful, thank you!

[@zrcarbon9937]

Hey Thanks so much! Yes, everything going to be clear coated and polished. That’s probably my next vid 🛠️🤘

[@starmokey195]

Great job ! Did the large mold with molding past has deformed during the post cure ? I already had deformation issues using high temp molding past for large mold

[@zrcarbon9937]

Hey That’s bad The post curing temperature must be increased very slowly Start on 60c for two hours and every two hours rise the temp with 10 degrees Celsius up to 120.

[@starmokey195]

@@zrcarbon9937 alright. Thanks I'll take notes. I used the post cure cycle gived by easy composite for the emp160

[@FaizulHadi-o7f]

Fuel tank carbon fiber 🎉