100% Real Carbon Fibre (Fiber) KTM Brake Pump Cover

[@mofifield2934]

Can't unsee the car I drew as a child.

[@doneljohnmontano7100]

For those who are wondering why carbon fiber parts are so expensive, well this process itself is the answer.

[@thanghoang8910]

That’s why i love carbon fiber parts, masterpiece of work

[@HenkeLevin]

It only took 10 minutes 😉

[@rich7331]

ehhh for a one-off part, sure, but for mass-produced parts, it's pretty easy to turn them out. not to much more involved then molded plastic parts.

[@supee7541]

@@rich7331 the cost of fiber and time needed to bake it is significant.

[@rich7331]

@supee if it was mass produced, it would not be significant

[@hemsmar]

Can't unsee that it looks like a little cartoon car. Nice work

[@CarbonWorkshops]

🚕 😁

[@4by_yotaguy373]

Now this is a spectacular "how it's made" video! Excellent work 👍

[@tysonschroeter9431]

Thanks for taking the time to make and share this process… exactly what I wanted to see and learn about. Now to find the most cost effective place for supplies so I can have a go at this :)

[@MercedesE63S-AMG]

This video has cured me of my I can just make my own carbon fiber car parts, how hard could it be? Nevermind

[@migzz7976]

First cf fab vid I’ve seen, finished product looks 🔥. Great shaping skills!

[@matteoballanti5879]

I have made the same part but with silicone mold and prepreg , and i keep the 2 line of the original part!! Try the keihin cover (if you have a 625 or a 660) i have made one but not happy with the result.. Very nice channel , i appreciate!!!

[@billyvray]

Good work. Great vid. You might consider an oscillating tool for cutting the hardened composite. It works great without slinging debris everywhere like a rotary tool .

[@TheAnonymous1one]

Will a band saw work too? With a fine tooth blade

[@mark675]

@@TheAnonymous1one with carbon, grindings always better than sawing

[@jeffallen3382]

I made a carbon fiber cover for the rear brake master cylinder on my 1999 Suzuki RM125 about 20 years ago. I made a clay impression mold and then layered the carbon fiber into the mold. I was going to go into making fork covers for dirt bikes but never got around to that project. I wish I had done that...

[@yazandahan9783]

Excellent and professional work. Please, I have a question: What is the appropriate temperature and pressure for

[@Mortimusmoose]

Good looking part. Finally between you and AJ Hartman, and one or two others, there is getting to be some good composites content on KZbin.

[@CarbonWorkshops]

Thank you 🙌

[@SupercarSeany]

Love this (and your other) vids. Would be great to see a bit more context about what's going one...why you're doing what your doing etc. Either on screen or via voice over.

[@EMlNENCJA]

I want the outer layer of my armor coated with this! This is black gold 💜

[@eugene4154]

What I would love a vid of is the entire process of making a 1/32 scale slot car body, then the cost in the country this person lives, What the difficulties are, how to get around undercuts etc etc

[@akshayakumarbehera5840]

Wow.. It takes sooo much efforts

[@KARR]

Youre good with that little saw

[@James-fu9mg]

Amazing work!

[@leonardarola]

I was in the need to see this. Subbed. Thanks for sharing.

[@jasonmorgan661]

As soon as I build my air vacuuming table I'm gonna start doing some carbon fiber projects. Safety first when dealing with this dust.☠️ Btw he was using what's called a rib roller. We used them doing fiberglass pools. What's the blue stuff called though? I haven't seen that.

[@hayallerleyasayanbirisi4592]

Hello it was very nice work Can drone body and propeller molds be made with this method? By the way, it's nice of you to provide links for the necessary materials.

[@TheSulross]

Well, this was really cool - to see how to actually make such a part. However, questions for the curious remain: 1) was this part chosen as an interesting tutorial example or was there any compelling reason to make this part out of carbon-fibre 2) it's a pretty intense series of steps to go through (vs, say, 3D printing parts), so some back-ground on when and why to chose making parts out of carbon-fiber would be of interest 3) what kind of conditions can carbon-fibre parts be subjected to - temperature range, what solvents might potentially weaken them, what kind of mechanical shock/stress can they be subjected to 4) can the mold be re-used? Great video!

[@rileyward4929]

1) probably just impact force so it doesnt break easily it is on an outdoor vehicle after all 2) it is a lot of steps i agree 3) conditions are mostly determined by the resin you use some take heat or uv better than others as well as the coats you do after if any 4) short answer yes but depending on how you make the mold can determine its stiffness and longevity

[@tedbundy8087]

Beautiful work friend

[@steelcityspeedshopj.r6942]

Next time someone asks me how in the hell all the Carbon on one of my R6’s was $2000 worth?? Ill send this video for this tiny little part and show what goes into it. Great video. And Amazing work you do !

[@1238ed]

I appreciate your work, it would have been amazing if you had weighed the finished product vs the original and put it in the video itself. In any case amazing video.

[@littlereptilian7580]

Plastic would be about the same

[@nickvledder]

This is not a brake pump cover… it is a car.

[@jaythib8621]

You just got a new sub! Man this is satisfying

[@DanMotoLife]

Hi. Good video. I have one question. What kind of carbon you are using?

[@nineteen-sixty-nine9373]

Wow! I feel it looks better without the shiney spray coat.

[@AyBee.x]

Loved watching the mould making process, Im a laminator by trade but I’m still yet to make a mould! Do you mind me asking where you got your experience as you are really good! 🙂

[@CarbonWorkshops]

Thank you 👍 I have learnt all my skills through trial and error and what ever information was about.

[@yaminsiddiqui4690]

@@CarbonWorkshops chad

[@bjorn-eriksvensson2956]

Hello , what kind of carbon is that?? Is the bsckside sticky , where can i buy this , nice skills by the way 😊

[@drivingsideways2319]

​@@bjorn-eriksvensson2956 it's pre preg carbon fiber

[@15DurangoRT]

It's worth the money that you spend to have this process done rather than doing it yourself. Especially when you know that you're going to screw it up.

[@lljustice3877]

Love that Fred Flintstone car

[@MicBergsma]

Pretty cool!

[@АндрейПилот-п5е]

Красивая текстура, качественная весч!!!

[@SebastianAvila-q9p]

Any soon video of how to carbon fiber Tubes like for intakes and stuff like that?

[@mictiannine4151]

Шикарно) навыки как всегда на высшем уровне)

[@foghornleg90]

Would the electric 'tin snips' work better for cutting it down, than the dermal?

[@simone_81]

congratulations for the excellent work! How does cooking pre-impregnated carbon work? Is it possible to make it happen in a house with a traditional oven? Thanks!

[@devonbaker9118]

Wow! Great job dude

[@natecote1971]

You should totally make a video using my 23 bmw s1000rr bet you could make some sweet parts!

[@LOOKOUT2012]

Brilliant! How would I make similar but with a couple of locating prongs \ tabs on the rear?? It's for two clip on motorbike side panels.. I get the front face ... But can't get my head round now I'd incorporate two locating tabs that would hold the part to the bike frame! Would it be easier to just blue on after? If Anyone can explain or link a video before I pull all my hair out!

[@PureGfx529]

damn this took forever lol. really well educated video on the process of making one.

[@SmalltimR]

Amazing job!

[@nicholasjjacob]

Amazing results! I don’t see you using epoxy before or after laying down your sheets. Do you use any? Or is it just molded with the vacuum?

[@CarbonWorkshops]

This is prepreg carbon fibre meaning the epoxy is already in the carbon cloth and cures at high temperatures

[@nicholasjjacob]

@@CarbonWorkshops thank you!

[@Gong4791]

Congratulations!

[@SuperArchi2010]

Hi There Thank you for the video techniques with carbon fibre I have a questuon Hiw would you approach a conical shape 40cm diameter 30cm height Maybe one sheet to cover it all ar once or in pieces or any other way Much apprieciate your help Best

[@marca5883]

Wow😳 carbon fibre is not an easy job! 💚🇬🇧🌱

[@BondanHeru]

4:55 may create safety cabinet likes sandblast, vacuum to canister or fume

[@smogman2084]

I love your videos. Your parts look sooo good. I have one question. How thick are the parts with two layers of carbon fiber? Thanks for your ideas.

[@CarbonWorkshops]

Thank you! Finished thickness is only about 1.5mm. But very strong!

[@smogman2084]

Do you have a tip for me? I want a cover for my right side of the engine. but if I made the part it would have the same dimensions as the original. how would i get it to put it on top?

[@CarbonWorkshops]

@@smogman2084 you will need to make a offset on your pattern your moulding off. Best things to use is high temperature sheet wax.

[@CmwSpeedrunUk]

Beautiful work 💪🏽🇬🇧👍🏽

[@tonn333]

What’s the weight difference? And why no show how it looks on the bike?

[@fivas]

i would love to try do stuff like this sadly dont have garage for it

[@I2AT]

What is the oven/device you use for post curing at 135c

[@albertogonzales3536]

Felicitaciones un buen trabajo en fibra de carbono desconocía cómo era el proceso de fabricación de una pieza

[@rachparov]

How would it cost (larbour and everything) to have the equivalent of an electric scooter fabricated in carbon fibre?

[@roypaulcarter4654]

Beautiful

[@ZombiePanda1776]

Why did you add aluminum powder to the gelcoat? Never heard of that

[@golden695]

Great work👍

[@andreyd1823]

А что за материал такой, что не требует ввода смолы? И откуда самоклеящаяся подложка на нем??

[@DinkyDoughnut]

**Sometimes Parts can be Discontinued** So this is an Example of what may no longer be available for Vintage Gear. So this is an example that it can be Manufactured using such or similar procedures/technique.

[@DinkyDoughnut]

❤

[@RSmithsc]

As long as the original was carbon, of course.

[@gugurmayankk5656]

Hi .. can you show me how to make EGI for squid fishing lure with those material please 🙏

[@alipsaputra8927]

Sir, how long does it take to ovens the mold? And how long does carbon take to ovens and how many degrees of heat?

[@raffhelm4635]

Good work , keep form for next product for frieds 👍:)

[@roddas26]

That was mesmerizing.

[@shaunkoger8096]

❤❤❤ What did you use for a clear coat at the end?

[@벌새날다]

9분 58초에 뿌리는 액채가 무엇인가요? 몇번 뿌려야 될가요?

[@st7650]

I would love you see stihl chainsaw parts made from caribe fiber. Now that would be awsome

[@davidgalietti3398]

I was expecting some fiberglass hackery.. but that was pretty awesome.

[@trentosterone]

What is the yellow plasticine you use at the start? Is it a certain type? Also what is the aluminium to poly gel ratio please?

[@EWAScotland]

Omg what a complicated process, and they manage to build entire aircraft and cars out of carbon fibre! Must have autoclaves the size of small houses!!!!

[@CorrederaAdventure]

Good work!!!

[@franksagen5049]

Very nice!! Where do you bye the carbonsheet? You dont apply epoxy to carbon, or am I missing something?

[@CarbonWorkshops]

This is prepreg carbon fibre. The epoxy resin is already on the carbon fibre. And only cures at high temperatures

[@franksagen5049]

@@CarbonWorkshops Tanx!! ( :

[@Velo757]

What about cycling parts, have you made anything like that?

[@Evans_moto_career]

Working with this stuff is always challenging but its not always this complex

[@FerruhTumer]

Excellent work! Thanks for sharing

[@CarbonWorkshops]

Your welcome 👍

[@rockyk1395]

Nice work! Do you make custom pieces and other parts?

[@mervet.6672]

Hello! Is this carbon fiber part flexible for a bit?

[@belledetector]

Installed footage missing? Anyway good instruction video..

[@RLCPLUMBINGLLC]

Good looking part

[@jonathanw2036]

Great video! How many coats of clear were needed to get this finish? I saw your other video with the XCR squeegee'd into pin holes, but here you don't show that and it seems literally 1 coat? And with your aluminium filled gel coat, do you use that because you found that the standard Unimould gel gives more pinholes with the Prepreg? Or some other reason?

[@CarbonWorkshops]

Only clear coat on this part because it came from the mould pin hole free. With the aluminium powder, this is added to increase the temperature the gel coat can withstand as uni mould can only go up to 90deg c. Thanks!

[@jonathanw2036]

@@CarbonWorkshops and only 1 coat of clear? I've been doing 3 sessions of several coats with sanding in between, cleaning with degreaser and silicone remover, and even when it's pinhole free from the mould I can't prevent pinholes appearing in the clearcoat... The quality of your work makes me both incredibly excited and dispirited at the same time 😅

[@CarbonWorkshops]

@@jonathanw2036 I do 1 light coat, followed by 1 full coat. Doesn't always happen first time for me 🙈

[@jonathanw2036]

@@CarbonWorkshops Ok good to know! Thanks for the replies mate!

[@joelfernandez4473]

Que cinta lleva la fibra de carbono para que no se rompa la fibra

[@JesusMartinez-nn3ms]

I wonder why you didn’t use the original plastic piece as a mold instead of having to do all that process to make one?

[@Win5Weekly]

Because the newly created carbon fiber part would then be bigger by the thickness of the fiber. Doing it this way keeps the new part to size.

[@thanghoang8910]

What a beauty

[@rogercrier9115]

How would you make a mould from an FMF 4.1 Carbon end cap.

[@compspace]

Looks very clean, can you use the unimold system for prepreg?

[@CarbonWorkshops]

Yes works great, but choice of gel coat is important. The black uni gel doesn't work well

[@sniperkotakelor]

I want to know what is the name of the carbon material used in it

[@thebuildersg]

Good work! New subscriber here

[@smokeoutfpv4132]

That's Bob on 🔥🔥 how do you get the correct size and shape of the prepreg cutouts?

[@CarbonWorkshops]

Thanks, usually by making a template inside the mould with paper/masking tape then transferring it to the prepreg to cut out

[@smokeoutfpv4132]

@@CarbonWorkshops that's genius 👍👍

[@swaq8645]

Hi, what clearcoat you are using?

[@jorandeboed7437]

The algoritme loves This video 😅

[@andrefisher4292]

Love this video ❤

[@mamasolgarage6534]

Great work nice one 👍 👏

[@sttm1283]

please enlighten me. no resin here? or is it because its prepreg and it has resin in it?

[@markkraus3598]

Looks like you’ve done this before 😎 just curious- would adding some kind of stand to the mold make it stable & easier to work w/doing the part lay up ? What clear are you using , duratech ? Have a good one

[@CarbonWorkshops]

Not tried any of those methods sorry. The clear coat I use is Lechler 2000 macrofan

[@BENJAMIN_TTRS]

@@CarbonWorkshops Do you ever do parts for customers? Looking for some carbon bits for my new vehicle.

[@ravindran8761]

Good work. First time seeing in u tube. Where can i get carbon fiber and what is the price.

[@muhdasyraf3567]

shopee

[@garydeandeery]

I’m just doing a test Range Rover eyebrow. You can’t get any so Iv made a moulding too so I can make carbon fibre or chopped look I was just going to paint mine till others asked for a set lol

[@StickerBao]

NICE , Geat Job !!!

[@Holmesy89]

All that process and you dont use a pedestal drill for the holes? Any reason for that?

[@CarbonWorkshops]

Yeah, I haven't got one 😂

[@ruso9781]

Nice video! How many times can you use that mold before you break it?

[@CarbonWorkshops]

Iv got moulds made the same way that have had over 100 parts made with no damage

[@ajhartmanaero]

Good stuff!

[@CarbonWorkshops]

Thanks man 🤟