Lumen LED Halo Rings Installation Instructions

LED Halo Rings by Lumen www.carid.com/u... will increase the light output and visual effect of your vehicle's headlights. Lumen LED Halo Rings can be used as OEM replacements or easily wired into existing headlight assemblies not originally equipped with them. Provides up to 50,000 hours of lifetime vs. 2,000 hours for traditional bulbs while using a fraction of the energy without getting hot. CAN Bus compatibility ensures no flickering, bulb out warnings, check engine lights, or other data loop errors on modern vehicles so equipped. Available colors and diameters of angel eyes you can see at CARiD's website www.carid.com/

[@adilchaudhry8642]

That has to be one of the most cleanest civics I have ever seen

[@GHP99]

Lol, one of the last original Civics.

[@vatoloco1348]

lol I have a 09 civic but its rebuilt and when I got it decidef to take off the bumper and the dude that had it before me had it up with double sided tape😅 so I decided since it was already ruined to paint the decals since the tape was showing through

[@newyorkboss6124]

They just did it for commercial 😂

[@coydog7902]

*Confused screaming*

[@hakage8517]

Haha, not many left

[@seal-n-shinedetailing7348]

I just installed mine last night on my g37. Went with starry brand halos. Made a little 3 minute video outside in day time as that's when they get the most use. Over 300 colors and patterns , I'm a happy customer. They make any vehicle stand out . Try not to fall in love with them

[@gplusgplus2286]

Silicone will go dry and you will never be able to take the headlight apart again. Use the same material, its called butyl sealant.

[@Vishal_ks]

if u throw heat air ...then it will loose...so u can remove easily

[@soppingwetburgers6493]

@@Vishal_ks hes talking about the material used to seal the headlights, please dont make comments about shit you don't understand

[@fintansky9369]

@@soppingwetburgers6493 He was talking about how the silicone is easy to take apart. Don’t comment about shit you don’t understand.

[@yahbahisrael6522]

Cap....heat gun will take it apart

[@mark-fu4yu]

Thanks for the tutorial. Finally someone that explain straight & direct！ 'old is gold'

[@DapimpBDSD]

"Took us about 2 hours to do these halos" So it'll take 1 week for me to do it you say........

[@chinaleighshawtymane]

Did you do them ?

[@widowmaker777]

I always listen to well articulated men who have white hair.

[@animaxofficial4559]

😁😁😁

[@NeoJSsk]

They have the real experience !

[@mark-fu4yu]

Exactly！

[@cablenowadays6586]

Except bernie

[@saby8765]

I thought this is Scooty

[@AvinashArora0]

Fantastic guide, well spoken, and all steps clearly outlined!

[@langamaphumulo5009]

Thank you for your very professional,precise and straight to the point demonstration.

[@TimSzabo]

@@carid Yo! I am a student at El Camino and you are part of our program :D so cool you guys posted a nice video like this!

[@anthonygiordano6265]

I wish you guys showed the electrical connections and how it was all done a bit better. Only thing stopping me from going ahead with this job.

[@danielzukowski5184]

Me too

[@diegouy8277]

Just splice it to your headlamp or your running lamp (if you want them on all the time)

[@newyorkboss6124]

Finally good ass instruction video we need more like these other ppl caint explain it right

[@wuzihuzi]

When I searched this it was literally all Jeeps!

[@phatista]

Why did you use oversized halos? Why not just use smaller ones? Doesn't look right. They are cut off.

[@KB-xe8mt]

It gives an eye-like look where the bottom is like a lower eyelid. You can do smaller to sow whole ring. It depends upon what appearance you prefer.

[@michaelmarini3123]

Thank you for the straight forward explanation, it covered my few question very well...

[@janierios1194]

THE WORK IS SO DAMM HARD,

[@jerryrivera7704]

I like the way u installed and showed how to ..very simple clean and fun.

[@Biddybalboa]

except the electricals the most important part

[@RotogripRocks]

Thank you Larry David

[@godzilla7148]

Bernie Sanders before he became a socialist!

[@LoserSnoozer]

BRRRRRRRRRRRRROOOOOOOOOOOOO

[@ELP1125]

💀💀💀

[@NanoProtection]

Looks really cool! Well done CARiD! ;)

[@CCBurban]

Car Id has a KZbin channel I got goosebumps 🤭🤭🤭

[@erinpitt580]

The HALO don't have backing to reflect to halo light out to the front of the car, and the inside of the headlight assembly is soaking a lot of light and reflecting it back out kind of drowning out the halo effect. Use adhesive reflective tape on the back side only of the halo, to prevent the light from soaking into the headlight assembly, and the halo will be brighter and more "seperate" light source from the headlights when they are off and just daytime running lights on, And with headlights on at night. You will get more light projected outwards from the HALO to the front of the car, and it will look way better at night.

[@JonRedeye]

Erin Pitt what reflective tape would you suggest?

[@mikhailalphonso9611]

i bought those for my em2 civic aftermarket projector headlights and its pretty bright and it was a perfect fit also. pretty east to install. i think oracle invented this new kind of halo. its like a ccfl and led hybrid. its bright like an LED ring but smooth like a CCFL ring.

[@willcarruthers7989]

are these road legal cos I want to buy them but they technically interfere with the reflectors in the light

[@-.__]

By wiring it to the parking lights does that mean the lights would only be supplied power when the parking lights are on? I'm not too familiar with headlight assemblies yet

[@kingturk3918]

How do you know what size you need for specific model . Example golf mk5

[@chechilesgarage2536]

Hey buddy, I'm trying to install an angel eyes in a VW T3 but I've ordered a 163mm complete angel eyes and the led driver but does not work, I tryed everything even directly to the battery and nothing happens... The led driver output is 900v 25hz... I though I did ordered wrong? Could you help me?

[@jamesryan6224]

"Slotted" screwdriver. You're welcome. lol

[@tlowwilliams3783]

Where can I go to get mine's done I have halos but I want to change the color

[@hiroshi138]

Nice tutorial. Clamping the two pieces back together (vice tape) to re-set the glue may be more effective, no?

[@jamesnewell3521]

Was here wonder if it could work in my car, but when I click on the vid it’s my exact car 😁

[@jamesnewell3521]

Thanks much. Love from Jamaica.

[@LeSigNagE]

Sorry to hear that :-(

[@bcob8989]

@@LeSigNagE what

[@akamekira2769]

Will it get burn?? Bcs the wire didnt connect with any 12V relay

[@mikeyjohnson9316]

I have aftermarket headlights with a ring around it but it's not bright enough I wanted to order sum like this and install them .. but wouldn't the light behind it still be on when the rings turn on?

[@blondiexox]

Does anyone know if this will work on a 2020 Honda Civic ex sedan with stock lights???

[@El_TerribleVP]

Tk you Sr. Very professional tutorial!

[@Soldier1287]

are they on when the headlights are on, or do they turn off

[@bigodeku1491]

Quick question guy's, what's the functions of the red and black wire connector that comes with the projector? Secondly, where do that connects to?

[@shivandabideen4587]

very well stated and layed out... awesome and helpful video

[@Spartan117A51]

+CARiD hey carID I'm not scared to take apart anything I'm just scared with the wiring part? how do I do the wiring the right way?

[@hello12321hi]

I tried to do this in the oven but it turned into a cake. what do i do?

[@adaywithshaman2318]

is that safe from dust?

[@robertfranks3934]

cant you glue it

[@AznXReveal]

Would you happen to know the size for an Acura TL 3rd gen (2008)? Thank you

[@ramonzamudio4442]

Please help me I cant find any tutorial to install led halo rings in a mercury grand marquis 1986. Maybe you can tell me how to do it.

[@elandy4831]

Thank you CARID

[@abdovwmk4]

Great video so helpful

[@katogee7042]

Can they 1998 grand marquis

[@JohnDoe-rd5hu]

Hi do you have a video on how to wire to a switch for a on and off in side the car?

[@JohnDoe-rd5hu]

CARiD if i do wire them to the parking light would they turn on and of while the turn signal is on?

[@Andy___1990tiktok]

Seems like a lot of hassle

[@chrism7067]

well thats just how it is to install something aftermarket inside your head light housing. Dont do it if you dont wanna put in the time or pay someone else to do it

[@wolfgurl88]

I'd rather pay more for a complete kit already done

[@utube31291]

I wanted know what's the diameter of the picture hanging wire?

[@tonycervantes4816]

Can i put on 97 nissan maxima gxe car id ?

[@Dalvarus]

I installed CCFL rings and they melted as the top was above my headlight will the plasma do the same ?? Please anyone

[@Dalvarus]

CARiD it was because if the halogen but im unsure whether i should go for the plasma wouldnt the halogen do the same to the plasma ring?

[@edgarcuello5349]

nice video what size the ring you used en this Honda civic

[@tonycervantes4816]

What size i need for 97 nissan maxima gxe can you help me CAR ID. AND NICE JOB . YOU DO

[@dilukabeylk]

Note the amount of reflection from the headlight reflector itself that has ruined the halo light quality of contrast.

[@SentinelEx]

I agree. It looks so dumb tbh.

[@Merlin333J]

Interesting halo build, it raises a couple of questions. 1.) Can the clear plexi wand withstand the temperature of the main headlight and UV? 2.) what wattage, type and size of LED are you using? Thanks

[@shanerikalundy320]

How do u know what size u need

[@krisjones0926]

Measure you're headlights? Did you even watch any part of this

[@randomrangoon5476]

Straight forward. Thanks

[@blackpower143hp]

Very good video.

[@shawnmacritchie5351]

i see water in the headlights down the road

[@chrisrstt]

or u can buy a bmw

[@RagingBad]

chris s there are many BMW's that comes with halogens

[@KheBergas]

No thanks, we'd rather not be in the shop every six months.

[@magicalpieceofpugtato8359]

LOL!

[@mikexcanxjerk]

when I see ppl with a bmw with full halogens from like 2000s I just laugh , like you really bought a base model car.

[@jivdis1x]

@@KheBergas you bought the wrong BMW.

[@coydog7902]

Your a legend!

[@mik3ybabii]

would soldering the connection directly to the lights power and ground be a bad idea?

[@superdutyzack]

+CARiD.com I have a custom headlights that have Halos but are poor quality and I want the RGB Oracle set, would these fit my truck?

[@robertomorales5347]

i fkn need the patience of this mister to do this shit hahahaha

[@ukkano]

I don't even own a car, i just liked the speech

[@InSlobnia]

Anyone know what that Tool was called to drill that Slot for the Halo?

[@silossilos1927]

I was considering this for my older car, nd lucky me the example is ! 🤣

[@chanraj100]

i always afraid the glue may leak after time,,

[@banggangmelly700gang7]

Any for Infiniti i30

[@SlipBscsr12]

I'm just a little confused with the wiring part, but I'm sure I'll get it

[@dennisthemenace8825]

By the prophets were you blinded by its majesty

[@sandhyabipin]

2 things to clarify 1 shade on light beam reaching area 2 Chance for melting of soldering led for connection wires because of heat producing in the reflector chamber when halogen head light bulb is on for long time ride Please advise.

[@Keepitgoinging]

But why?

[@demigod5219]

does having halo rings & vinyl tint on your headlights enhance or decrease the effect of either? or does each just do its own thing even together?

[@stevenharpervw]

But your reducing the reflective efficiency of the reflecting With that big circle. This makes no sense

[@bmanclassics4350]

Jus turn the rings on at the same time I guess 😅

[@ronedwards8239]

I purchased 4 Lumen 7443 from you guys. Absolute junk. Lasted approximately 1 year and segments of all bulbs started flickering. There are far better products at half the cost. When examining the LED's she I applied slight pressure on the side panel LED's they would light up. But even the front LED on the bulb was going bad. Save your money!

[@Krazykidone22]

sounds like cold solder joints, possibly from the heat of the headlight over time.

[@dino339]

What other products you recommend?

[@davejalenderki]

Nice video.

[@vertigo7096]

This a terrific instructional, thanks.

[@tinkusing3761]

Very very good

[@joboss9511]

Doesn't seem that great of a halo assembly for how much time you have to put into the whole process.

[@JamesWilson-du4xt]

I tried it at 500 degrees but it took too long so I set it at about 950 and I over heated it but it came apart so I'm not complaining lol

[@DirtyMikeHoncho]

What kinda oven do you even have that goes past 500 lol

[@Masomanable]

that was the easiest front bumper removal ive seen.. can you do it to my car

[@Mooch2myLoO]

its even easier when u have the quick release .. u can get it off the car within 15 seconds

[@rgbtape5946]

Well done

[@Chupria]

That's way too much work. If you sell a 2004 Saturn Ion Sedan complete headlight and halo ring already pre-installed I might buy it.

[@djmonster13]

the process was well spoken but it would have been easier to just install the right size halo and not cut into the reflector. Never use hanging wire guys nor cut your head lights. Use the right shit in the right place.

[@MrJiblack]

Hot water will loosen the bond to

[@danfuerthgillis4483]

I would blow a gasket if this failed after a few days and had to remove everything again!!.

[@hustlerkc11]

Gonna leak like faucet, have to add new sealant in the channel.

[@magia5035]

That shit is ghetto fabulous.

[@chrisnguyen1944]

Or u coulda just stick it in the oven at the right temperature amount

[@kxmikalbot9639]

This adds HP! Let's goooooo! Lmfao 😂

[@leorodriguez6080]

Cringe comment

[@csanisha2]

help full video . thank you

[@urban8644]

Easy to install

[@scarh3426]

Should had used smaller rings would had look better

[@jayrock305]

If your going to do it do it right

[@jayrock305]

Looks like crap

[@cakedom504]

Why do you have to ruin it and do it on a Honda Civic

[@kevinsmith6oh6]

The juice isn't worth the squeeze

[@tonybelisle423]

It's not a complete halo it's cut off at the bottom I think this is a getto ass job

[@mathewchillackal3165]

Well that little cutted spot for halo....it will ruin our headlights after in future.

[@monjier]

Just buy Stok headlights in the future if that's the case

[@yinde5902]

The wiring might be the hardest part

[@BIllF02]

This should be relatively easy... 1st step remove the front bumper🤥

[@sringfield45]

Who uses scotch locks like that? He wouldn't be putting mine in

[@Thesquiggleman]

Fuck it I’ll just ask my garage to do it 😅