Transforming our Model T Go Kart into a Burnout Machine!

We modified our Model T go kart with a Tillotson 225cc racing engine, a live axle kit, and more to do MASSIVE burnouts! This shriner parade car was never designed to be a burnout go kart, so we had to modify the axle, wheels and tires, front suspension, engine, and driveline to make it do massive burnouts!
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
3.50 - 8" tire: bit.ly/3cY7UcD
8" spinner wheels: bit.ly/3D64QG0
Live axle kit: bit.ly/3Qq1fXJ
Upgraded spindles: bit.ly/3PXQk68
Tillotson 212cc engine: bit.ly/3rf4Kok
Big valve Tillotson 225cc racing engine parts breakdown:
Tillotson 225RS long block: bit.ly/38VCvzv
Billet side cover: bit.ly/3Nd3QSI
Billet rod: options available, call for your specific application
285 camshaft: bit.ly/3wYW5cs
Billet flywheel: bit.ly/3m3Xx8d
Dual 55lb valve springs: bit.ly/3zhe7cJ
Exhaust valve (25mm): bit.ly/3m5ze9Z
Intake valve (28.5mm): bit.ly/3wYTOOl
Titanium valve retainers: bit.ly/3PUkzfv
Racing coil: bit.ly/3x9rQk0
28mm flat slide carburetor: bit.ly/3oWSFRJ
Header: bit.ly/3x9R2Y0
Chromoly pushrods: call for availability + length
Gauge roller rockers: bit.ly/3m2W2XI
3/16” fuel line: bit.ly/32iAlNe
Fuel filter: bit.ly/3f81xRe
Tillotson oil: bit.ly/3sRRgAk
Go Power Sports: bit.ly/3QKyODE
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@bigbobvub]

You guys are so cool!! I'm a recently disabled Army veteran, and housebound which really sucks, but since finding y'all's channel it's cheered me up. Thank you!!

[@jhaedtler]

On split rims I have found if you putt a little air in the tube it will help clear the wheel haves and stop from pinching the tube!

[@marissataylor4108]

That's ikes trick to! He said it in multiple vids

[@fightfanian]

@@marissataylor4108 must work, coming from multiple sources.

[@bobadam7021]

"We're not going to modify the frame" - I knew that would age like milk the second something got in the way.

[@BIllMcCambridge]

Just cut it already!!! Yall rescued it from turning into a pile of rust. That thing has already had more views and appreciation now that it ever would have had. Looks good. Nice donuts and heck of a burn out. Nice edit John just a little too heavy on the apologies for me. Thanks for sharing y'all's talents and adventures.

[@rimfire2642]

When I was a kid in the 80s, my church raffled one of these off. It's JUST a go-kart, nothing special.

[@inspireonex]

Ike made a joke about people stealing wheels from John's but we haven't forgotten when that really happened.

[@Lively_1185]

Was there a video about it or just a Facebook post? I don't recall any theft regarding tires, but John's minibike I know that was stolen.

[@aaron_brown7324]

Pepperidge farm remembers

[@inspireonex]

@@Lively_1185 that was it

[@Lively_1185]

For my future self, 7:03

[@Hitycooking]

kzbin.info/www/bejne/gn29aHhuYsljpLs

[@hydealmen5280]

You guys should take the old frame out building a custom one and make it a proper burnout car

[@Hitycooking]

kzbin.info/www/bejne/gn29aHhuYsljpLs

[@Rattus-Norvegicus]

It's kinda too late now.

[@hydealmen5280]

No

[@jackmagnium6115]

take it to the drag strip and cleetus and cars. it deserves to be more than a burnout machine. it looks like it can haul ass down a strip

[@Butters_Stunts]

Hopefully it doesn’t end up like Neighbor 😂

[@Hitycooking]

kzbin.info/www/bejne/gn29aHhuYsljpLs

[@208Concepts]

Garrett would probably be down for a mini burnout class 🤣

[@ebalmes]

6:13, “these are really sweet wheels” says Ike, as he grinds the brand new wheel into the concrete floor. The sound of a brand new wheel grinding on concrete was almost like nails on a chalkboard. Jeez, put a towel down, or a piece of cardboard.

[@socialxperiment3162]

Wrench monkeys don’t care about preserving or making things look good lol, they just make shit work

[@tslim250]

Dude i was cringing so hard at that one, man ike wtf!

[@Nunya_Beezwax]

Exactly....🤦‍♂️

[@baymechanic1009]

acting like those wheels arent about to get thrashed on the grand prix next episode....

[@redflthcui]

Just saying thanks. You guys went above an beyond on the "vote for turbo" shirt deal. Figured Id get a shirt. Didnt think I'd get a shirt, signed sticker, and part of the drag rail clutch (also signed) very cool indeed. keep up the content.

[@CarsandCameras]

Thanks for picking up a tee. The names on the firewall was Charles' idea. It looks sweet with all the names on it and it helps us with the big upgrades we're making to the driveline.

[@redflthcui]

@@CarsandCameras oh man. I forgot about the names! going to have to get a shot of the fire wall up on your website so we can find our name.

[@kccarzofficial]

@@CarsandCameras imma buy a shirt now

[@ghomerhust]

oh badass, you got a hunk of the explosion! thats wicked

[@jdmjedi777]

It's clean!!! Looks great guys and love the video.

[@jerryfallin1753]

I knew it would only be a matter of time before you hotroded the model T, Its looking great, keep up the good work ! I'm a 74 year old street rodder and I've watched you're Chanel from the at art. And loving it !

[@zZWolfyZz]

Sounds like youve had some fun in your time brother I recently picked up a really clean deuce roadster and have been debating what to do with it I can't decide wether I should rod it or leave it stock haha either way will have to wait for me to finish my 57 belair though

[@dylanzrim3635]

It’s a T-bucket now

[@jerryfallin1753]

My street rod was a 30 two door sedan chopped and power by 5.0 mustang motor. And a 55 Ford F lOO power by a 351 CJ. But now at my age I'm riding my Vw power trike chopper ,and my Daughters are driving the street rods. I have over 100 trophy 's the vehicles won at car shows.

[@jerryfallin1753]

Street rod the Duece ,It more fun that way ,and let the good times roll! 🙂

[@radoncave69]

I just don’t understand why people get all bent outta shape when y’all guys what to modify something y’all own. All the mods you do to a really old cart frame is just making it better and really a lot safer!!! C&C y’all don’t worry about what the haters say. You insanely good stuff, and you do it like all of us back yard mechanics do!!!! Keep up the awesome work!!!!

[@051570orion]

It's like a mini thunderbolt grease slapper ... Tom Slick cartoon , Ike should be old enough to remember that cartoon . Lol

[@robertdicarlo4490]

It looked like passenger side rear wheel had a little wobble in it during the burnout. That Model T has a fever!!!!!!!!

[@cavemanvi]

"we might install a lubrication system" meanwhile a hose sticking out of the side in the intro LOL

[@cavemanvi]

gotta be worried about pinching the tube "WEVE ALL BEEN THERE" amen brother after this video I was thinking of doing the same

[@MrGixxer1300r]

You guys are really good at what you do as far as what parts you need to make or buy to get these projects running. My hats off to y ou on the Model T build, and the care that was taken during modification.

[@KingCobraJFS]

I love model t go-carts now all it needs is head lights tail lights and a crank

[@larrydavidson3402]

This Model T 0.5, is turning out to be one cool go kart. I really like those rims on it also. Keep up the great work.

[@Hitycooking]

kzbin.info/www/bejne/gn29aHhuYsljpLs

[@ThirstyFoe00]

Startin to freakin love this build guys keep up the great work.

[@dynamite6507]

Everyone who commented better 👍 these guys have or had other jobs and really put in the work to give us awesome content. This is absolutely my favorite channel on Y.T

[@bjrobertscbr600f3]

Thanks! Love the idea guys! My favorite channel! Wish I worked with you guys! Best job ever!!!

[@ibroughtaturbo-chargerfrom667]

Bro did you just wasted $5?

[@lloydbaker7099]

John congratulations on the channel and the crew in my opinion you guys have hit it out of the park

[@davesplace1307]

A manual hand brake for the front wheels would be awesome! Let's see it get done john, ike and charles!!! If anyone can go it itll be certified gap welders from carsandcameras

[@marissataylor4108]

Nice to see you guys hired a new guy been a while since I've seen him do something

[@genehasenbuhler2594]

From the first moment I saw a Shriner troop in a parade I have dreamed of Rat Rodding one of those model T's😆 you have fulfilled my dream👍😁

[@strongandco]

John says: "It's important to preserve the integrity of this historic 50 year old parade cart." Ike and Charles thinks: "we'll see about that" 😄

[@robertsnyder8855]

lol🤣

[@GratefulEd907]

It only hurts the resale value of you plan on reselling it and because it’s such an improvement I don’t think it hurt it anyway

[@Hitycooking]

kzbin.info/www/bejne/gn29aHhuYsljpLs

[@kshepthedrummer]

Ike: "were not going to modify this so we can keep it all original" also Ike: "so were cutting the frame to be able to do burnouts" 🤣🤣🤣

[@TheKurtsPlaceChannel]

Very nicely put together video and very entertaining as well. Thanks for posting this.

[@medburd]

You guys should make a killer looking multi trumpet exhaust for that!

[@THEMOWERMEDIC1]

Ike : I guarantee you that's a Lawn mower transmission. He would be correct. Modeled after a snapper rear engine rider 😁

[@roldan1988]

Awesome guys!

[@Zack-ni4hs]

the three of y'all remind me of my 2 best friends and I, keep up the awesome builds, and props to the camera man as well.

[@trumpfancardanostakepool4737]

I'm glad you guys don't get too precious with keeping everything original, because the mods just make it so much better.

[@christopheralstrup8478]

I love seeing what you guys come up with great job !

[@kristianellis1858]

Great work fellas!

[@Bob-gx4wn]

" Anybody can restore a car, it takes a real man to cut one up"! (Posey's Hot Rods). Go for it!!

[@someweirdassdude5759]

I’ve been watching you guys for years seeing you guys grow up and become more professional is such a great feeling

[@jameswarren423]

Really like this build you guys did a great job one mean little machine! It looks like it could be a real little ripper ! would like to see a top speed and can’t wait for more burnouts! keep up the great work guys!👍🏼🤩💪🏼

[@mr_sketch]

This is exactly what I hoped you all would do to this thing. Love it

[@MattSmith-mx2yg]

That is so sick good job guys

[@mattcreek3671]

All good nice job yall!

[@johnconnell1424]

Awesome 😎 burnout . looking sweet

[@DMILLION160]

Good job guys💯

[@lukemeier1853]

Fun video guys....the child is us all is shouting hooray! Burn outs!

[@Smurphenstein]

That is going to be a surprise in the town parade. 🤣

[@marksmithson1414]

They finally got John to do some work!!! Amazing LOL!!!

[@Robert-ni6ut]

Great video love that cart . Watching john do those donuts was so satisfying 😆 lol

[@jonathonh1089]

Thank was really awesome to see, thank you guys so much.

[@joshuaaltizer9047]

Kids now days need that in a Parade.!!! Keep it like u make it and put it in one.

[@shk2564]

I can’t help but close my eyes every time you weld because I have burned my eyes in the past! 😂

[@justinfurman9267]

Thats soooo cool i love it!

[@danf4616]

Looks far cooler as a big wheel hot rod, than it ever did as a parade kart model T! 👌

[@BUILDNIGHT]

Hey John! So glad you’ve announced the Fall Minibike Mayhem! We had planned to be there in 2020 but COVID stopped us all! We’re coming next month! MeralMan329 from Massachusetts! Bringing a brand new build, as well! Can’t wait!

[@RearEngineShop]

Who didn’t see this coming?! 🤣 This is awesome.

[@robertrichardson1973]

Y'all need to go the the next Cleetus and Cars. LOL

[@BIllMcCambridge]

Yeah enter the burn out contest. Guaranteed trophy for that thing!! It sounds sweet doing donuts.

[@bobmanzi7712]

Isaac the look on your face when you were doing the burnout was priceless. As always great stuff guys. Thanks

[@brianreese9318]

Super cool amazing

[@adammullinger6848]

Hello guys hope your good.. Id like to thank you guys i ordered some gap welding stickers from you, (From the UK) You went out of your way sent me extra stickers and a stitch on gap welding patch plus you all signed one of the stickers made my day.... Been with you all the way back to cc10 days. when john was bigger than Ike... ;) watched everything you guys have posted many many times... Thanks again guys you have manged to keep humble not go too far from your roots unlike many other channels that have become huge. Charles is a great addition to the team also. Thanks

[@richb313]

Love how it came together looking forward to next week.

[@isomer13]

Idea. Make a fully custom burnout kart and shoot for Cleetus McFarlands next burnout competition. Seriously.

[@Chris-cq5dy]

Model T burnout car hell yeah guys great show

[@ucikbarker9763]

💯%awesome🔥🙌

[@johnstancato8785]

As far as I'm concerned you owe no explanation or apology because I think you're just making it 10 times better I'd rather ride your finished project in the parade before I would want to ride it the way it was

[@1YouTube_you]

Man that’s so cool!!

[@bustinyanutz4195]

It's your freaking kart , nobody else paid for it except you guys so who cares what anyone says it's not theirs, if they want one that's 100% original then they need to buy one. Do whatever you want to your kart ( key words YOUR KART) . You guys are only improving the kart which is actually preserving it, if you didn't do the improvements it would just fall apart. Final words you guys are doing a great job and do whatever you guys want to YOUR KART

[@byron7165]

Yay! Still waiting for that Bar Stool racer build video.

[@TheRealDToTsO]

Love the fun content and building!! Rear wheel looks like there's a wobble, is it warp from weld / Bent Shaft or wobble from no jig? / @25:05

[@MrThunderCunt]

Yeah i noticed that too, but remember the rail used to do that when it had those wheels and tires too, but that was just axle flex. Also ignore the other comment. Same account comments on all my comments.

[@johnweeks5614]

Cool you turned it into a pro street cart AWESOME

[@Ifitallfails]

You guys are nuts, I love it. 🤟

[@Brandonvscars695]

So glad you guys are finally building a burnout cart MHC approves

[@bustinyanutz4195]

Ike looks like a little boy while he's doing that burnout, cheesing the whole time

[@Legoman585]

So cool guys, Early in the video I was thinking the only missing is chromies for the front. Then out came those beauties. Nice go cart guys.

[@jasonpetrich4141]

You guys are awesome as always. Thank you for the yrs of shenanigans. Keep it up your doing great 👍

[@matthewpeppard6537]

Awesome episode as always! That things a rip with a great look

[@darploin5071]

That is awesome what you did to that model t have an excellent day

[@Adventure_Van_Upgrades]

Can't wait to see this one guys keep up the great work

[@tristanmcnabb2741]

Woohoo 😁👌🌟 nice work from cruzermans inventions 😁 🎉🌟👍

[@StandForFreedom1776]

I would love to see you all build a whole series or old vehicles from scratch. and make them all hot rods. Do and olf 50 to 54 pickup, or a VW bus

[@spanky_88]

Ike’s shit eating grin while doing the burnout made my day. Haha. Great content guys and proud to have my name on the drag rail firewall.

[@taneleveridge3055]

This is dope

[@Llyduramax]

Great vid this is definitely a banger

[@matthewherard3297]

Man I love these three musketeers so much they're like the dream team keep up at work guys love the content actually look forward to the new videos every week

[@sunburntlawnmowermechanic16]

y'all need to bring that model t go kart to the drag strip

[@noluckgarage8026]

This was so awesome

[@perry5598]

You guys need to get in touch with Cletus McFarland, start a go-kart burnout championship at the freedom factory 👍👍👍👍

[@brycerobbins875]

Can I vote to just modify this sonofagun as much as you’d like because it’s way cooler

[@awpgaming7505]

on one of those kx80 or 85 other ones you have. Do a full factory restore (if you can, or as close to possible) on it. make it look like brand new, then save all the footage and post up a 10 min start to finish time lapse of it when you are done down the road. Easily bring it new eyes, and prob a million views in 6m-1 year. Alot of people like those videos, little music, clean, no talking, complete satisfying video. Be a great idea for the channel

[@ericflower9855]

It's like watching the "Power Hour" where the show is just one long commercial...lol...Still cool video!

[@cobramike13bravo63]

You guys are living the dream life, love you guys.

[@notimegarage8632]

Oh yeah!

[@GrumpyIan]

imagine this little monster winning a burnout contest at Cleetus and Cars.

[@edtuller2537]

Guys That Cart is Awesome

[@countryboyscooter3402]

Eddie Munster cart. LOL!!!

[@mikeomalley9511]

don't worry about the frame, it's a very cool restomod of a T!

[@mckrackin5324]

Gonna have to hit the next Cleetus and Cars burnout contest.

[@billytracy7580]

and the guys are working very hard and still have enthusiasm thanks cars and camera for where you started and where you are. ps love the 2 stroke dirt bike i have rm250 and kx250 and a mini bike im building since i started watching your channel just somthing to ride around on in the pits at dirt races.

[@rubenexposito6171]

Hola gracias a ustedes le hice un got kart a mi hijo mil gracias saludos desde España 😉siempre vemos sus proyectos

[@johnnyphillips9735]

Nice build on that model t and ike there is someone trying to hack on your other channel claiming that we won something just thought I'd give you a heads up keep up the good work this old man still loves anything that runs

[@JoeRocket-sf6qs]

The guys that can build from old used parts those are the guys I admire,anyone can build when you have a parts supplier and modern tools.

[@shark11175]

Man I love Charles, what a unit

[@MrThunderCunt]

Looks like the trans could be off an old wheelhorse sideshaft ridingmower from the 60s