How To Replace An In-Tank Fuel Filter On A Subaru

[@emgee_eegme]

I can imagine the design meeting when Subaru came to the fuel filter... "Hey, here's an idea, why don't we make changing the filter as hard and as impossibly complicated as possible? We made it easy to change on our other models and just put the filter under the bonnet and it's an easy 10 minute job but this time let's really make it a total bastard to change. All agreed? Excellent"

[@erichertsens]

Shame on Subaru

[@gabrieli334]

It’s how they make service centers money

[@dingpongchi632]

Now day most of the new Japanese cars using in tank filter, not just only Subaru.

[@songhong5482]

Agreed ,design to sliming our wallet,

[@VincentChan86]

@@gabrieli334 Funny thing is, their service centers don't even want to change these filters

[@matt_b...]

13+ minutes into this, and you've just convinced me to buy the assembly versus take my chances on this level of rocket surgery to perform a simple task. Many thanks for the video, though. I'm sure it took a lot of know how and skill to pull this off.

[@michaelmardini346]

So true..

[@JonathanVaucher]

I think with such a great video tutorial, I could do it myself. The tools aren't really complicated. The main rule of thumb I see here is 1) Take your time, 2) Don't force anything (plastic does become brittle with time) and 3) Use the right tool for the job.

[@alextallen8019]

Yeah dude, 100%. I KNOW I'll spend the 70 bucks on the filter and then break the pump and then end up breaking the pump anyway.

[@crxtodd16]

I did it myself and it really wasn't bad at all. Even so, nothing wrong with just going with a whole new assembly.

[@lainhensley9635]

bro it took me 30 min.......

[@jryanwill]

Trick to stop flow out of the pump assemsbly. Open your gas cap to relieve the pressure in there.

[@CarsNToys]

Good tip! Thank you

[@dannyslayer]

Just did this job, worked perfectly! Thank you!

[@USFZeus]

Also use vise grips or hose pliers to pinch off the fuel flow.

[@edgarastorga582]

This is so helpful. The BRZ/FRS/86 also has an in-tank fuel filter like this and mine is overdue. The part is different but I am assuming the fuel assembly service procedure is similar to replace the fuel filter. I have not found any videos or guides specific to the the BRZ/FRS/86.

[@patonbike]

Great video. I found an new aftermarket assembly for < $200 . At some point your time and sanity factor in! The module swap out can be done low stress under 2 hours including test drive, tinkering and clean up. I changed it at 192k with no problems , just wanted to upgrade for upcoming engine modifications.

[@seanhoward8025]

Be sure to reinstall the fuse and battery and start the car to check for leaks PRIOR to installing the cover plate. This is imperative!!! It's very dangerous to put everything back together and assume you have no leaking gas.

[@PeterStClair-e1s]

Thanks for your guidance. Did a Subaru forester 03/2010 EJ25 with 300K on clock. The Ryco Z931 filter was not as complicated as the job you did but with video help was able to put it back together. The Ryco at A$145 was exactly half the price of a subaru genuine unit.. Great work my friend

[@wilsonveas5953]

Tengo mi Impreza hace unos 12 años y creo que todo se lo he hecho mirando tus videos 😁 agradezco realmente tus videos son muy detallados y precisos 👏🏻👏🏻. Gracias amigo.

[@JesOj.]

Wow! I was an Aircraft Fuel Systems Specialist in U.S.A.F... You did a great Job.. Video was on point.

[@nodirectionmedia749]

Thank you for this! Literally had One mechanic refuse to do this for me and Subaru say it doesnt need to be done... but i just his 130k on my 09 outback ... now I can do it myself!

[@CarsNToys]

Happy to help

[@ForgetfulJP]

Hi I'd just like to thank you for your thoroughly detailed "How to video". I've watched it over and over as it was my first time attempting this "in tank"fuel filter change. Only you and another guy on KZbin show how to do the job properly on a Subaru Impreza of my generation. It took me longer trying to figure out how to remove the rear seats. It seems that the 2009 model didn't have the release buttons like yours. That was a pain in the ass!!! The other tough part was trying to separate the fuel pump from the assembly. After 5mins of struggling I thought heck why do I need to do this when I won't need to reuse this assembly. So I use pliers and cut those tabs to shreds like you did when separating the assembly. The best part is starting e car after and it worked! 😬

[@CarsNToys]

Good stuff! Glad it worked out. Cheers.

[@bmwrules28]

Awesome awesome video! Goodness the job looks like a PIA and probably will take all day but for peace of mind knowing the fuel pump will last and at least the factory recommended maintenance is done, is smart. It’s bad that most people will never know (unless they check on their own) if this job is really done properly. As well, thanks for the details on how to remove the clips and then to replace the seal. I’m going to try to run the tank near empty to hopefully make it easier. Still have another 20k before this maintenance is due. I’ll need a mask after Whiffing the gasoline fumes/vapors haha. This video should also apply to the WRX, Forester, Outback, Legacy, etc. Great job and Thanks again! Follow up 3/9/23 I just changed the fuel filter definitely took some time but thanks again for sharing your video. Absolutely great advice working outdoors and to change at 72,000 miles. Happy Easter!

[@fredlao6655]

This is the best detailed video on the install I have seen . You make it look so easy . I am sure it's not .

[@CarsNToys]

Thank you. It's certainly labor intensive.

[@TheBabbster]

Just did it - using this video - just as easy as the video. Thank you CarsNToys... helped tremendously. One thing I found is that I didn't need to fiddle with the motor tabs. I clipped my old filter tabs off and the motor dropped right out.

[@LodniKranazon]

Thanks for this! I have a 2008 Mazda 6 that has a similar set-up. I got less than 80K on mine right now and not really having any problems, so I think I'll wait till about 100K and just change the whole assembly.

[@jackwylie7754]

I want to congratulate you on an excellent video. The detail is excellent! You explained the pitfalls and how to avoid them in a very methodical fashion. After reviewing the video several times, I was able to accomplish the job in about an hour. Thank you for the effort and excellent format.

[@TheBabbster]

CarsNToys - thank you so. This pushed me to finally do this! I think the throttle response is better. Not sure if this is the case, but running with it! Filter from Subaru for $80.

[@CarsNToys]

Yeah, pricey. Glad to help. Cheers

[@advanced-electronic]

they don't recommend changing it so the fuel pump or the fuse blows, this way they get to tag you for additional labor to figure out your problem, then sell you the entire fuel pump assembly and your car runs like shit, you probably have to pay to have the car towed from 150 miles away and then you have to pay them to replace the pump in the ball park of $750 including the pump, filter assembly and labor. They also will try to tell you how labor intensive it is when they don't even have to drop the tank like most American cars do, as Subaru has been adding an access door under the seat so it is easy to pull out and replace, and the filter and pump are replaced in 30 to 45 minutes by any average Joe, without needing a class A mechanic to do so. You are correct for wanting to replace the filter every 30-40k because the filter gets plugged up with rust and other crap that the gas stations have in their tanks, water droplets, and other crud sticks to the moisture, dirt, etc, strains the pump and the car hesitates, while Subaru dealers just don't want to replace the filter because they make a ton of money replacing the entire pump and will charge you for the other parts while they all come as part of the kit. I've been stuck in this predicament before and have asked for the parts while they told me they just cleaned up the shop and their shop foremen threw the old parts away. The filter was plugged and the pump wasn't bad on my car, the fuse blew and they replaced only the filter because after they were done, I opened the access door and I removed the pump and showed them an old pump was reinstalled. I never paid them for the services, the labor or the parts because i threatened to go public with it. Plus, in Connecticut we have a law that states they can't charge us for parts or labor to replace anything unless they provide us with the old parts. Most folks don't know about this law, but we have a Subaru dealer that is notorious for doing shady things like this and I am not going to mention their name, but all of you guys and gals in CT that bring your car to the dealer to get your Subaru fixed, I will just tell you to go to Wallingford so you don't get robbed by others.

[@ghostrider2664]

wtf happened to Subaru? Its like somewhere between 2003 and 2007 they decided to start building cars with cheapo shit parts, and design the car so maintenance is as difficult as it can get for the DIYer, like you would swear they actually sat and thought up thid shit! And dont get me started on the seat gaps. FUCK THOSE LEGACY SEAT GAPS. Everything cheaped out on, moneypit repairs by design, working purposely against the DIY guy. Im sorry, but I predict the end of Subaru in 10 years time. This is a canary in a coalmine if Ive ever seen one

[@freeindeed5393]

Nice video! My son and I replaced the fuel filter in his 07 Legacy in under an hour!

[@cyrildupuy9453]

Very clear explanations, took around 1h to do the complete disassembly. Lets go to order the part 👌 Thanks !

[@FiferSkipper]

9:20 I missed why the temp and level senders had to be removed from the outside of the sub tank... Can't they just be unplugged from the top and left in place?

[@mikedaugherty7645]

Exactly what I was thinking watching this.. he just added a step for precaution.. but not necessary

[@214Paul]

Is there anything I need to do before putting it back in the tank ? Like do I need to have fuel in the fuel pump do I need to somehow drain the old fuel that was in the tank ?

[@Schizo-_-Gamer]

Great how to video!!! Thank you so much!!! About to start this myself, Im thinking the filter is bad. Some good news, I already have a bigger aftermarket pump just waiting to be plugged in my '08 STI. I added this video to one of my playlists on my channel. Thanks again sir!! Have a great day to you all!!

[@parafitality2730]

Did this today and took around 4 hours total to remove, clean, replace filter, reinstall and fill up tank. Worst part was the o rings, wasted around 30 mins trying to fit them on the new filter

[@MD-173]

Why didn't you change the the actual Fuel strainer on the end of the pump motor?

[@joshuameade2448]

That's the same sound my 2010 impreza non turbo makes during cold starts, when it finally starts it drives good. It will start fast when it warm but if I let it sit for a while it's a battle to get it started. I'm gonna test the pump and see if i need to replace it.

[@mcltpc15]

It is great to see someone do a proper, scheduled and educated review on a standard service item. Thank you! How many hours did you log on this job?

[@robzinnoegger2321]

Good video. This job is not really for the faint hearted but I could not fault your instruction. However I did have an issue doing one of these so I'd like to add something that I feel is important. When replacing the O-ring on the fuel pump, fit the O-ring to the pump rather than inserting into the housing. Because of the design of the houing the O-ring can become distorted and not seal properly when the pump is inserted causing starting and driving issues. Wasn't alot of fun pulling it all apart again but that's how we learn.

[@benargee]

I had the same issue with gas coming out of the fuel connector until I just removed the gas cap. It seems it was from gas vapor pressure.

[@meez5804]

Hi! I decided to change mine,myself to save money.I went through hell though,trying to get my back seat up.The bolt was so tight.Then when I got to the bottom,I didn't know how to get everything off,but I just started pulling.I did remove the fuel plug fuse first though.I'm watching to figure how to get the filter off the plug though.T hanks so much for doing this in the day time.Most of the videos where people do this are too dark.Looks like this is a lot of work.I might just buy the whole thing,rather than rebuilding the filter.Thanks so much for making this video though.

[@CarsNToys]

Glad to help. Yea, it's certainly time consuming. Buying the unit as one piece would save a lot of time and you could save the used pump for a few bucks.

[@mrbeans2425]

Great video! Convinced me to just buy a new pump though! lol

[@Damuan]

Great vid it helped a lot. To simplify removing the fuel pump from the old filter I cut the two tabs with small wire cutters. It came out with a lot more ease.

[@CarsNToys]

Good stuff!

[@ianwilder244]

another suggestion about the fuel coming out, I've read that you can relieve fuel pressure by pulling out the fuel relay switch and then running the engine until it dies. Should make less mess. Otherwise, GREAT video. Thank you.

[@whiskeymojo1150]

Great video, but i would suggest NOT to use an electric drill motor when removing any kind of fuel component. Be safe.

[@CarsNToys]

Thank you.

[@aflaz171]

Yeah was holding my breath.

[@CHAOSMOVEMENT]

Did I miss the part where you replaced the actual sock filter? I'm trying to get that off my pump right now to ship because it's connected with flimsy plastic, but I can't seem to figure out how it comes off.

[@rajg7342]

That is exactly what I was thinking.

[@Clearanceman2]

If you have the new filter in front of you, you'll understand what he did. He couldn't have been more clear.

[@Clearanceman2]

@@CHAOSMOVEMENT He put the new one back on instead of the old one he took off. Notice he cut the clips on the one one and the new one had no clips cut.

[@bjornefellhanded9708]

@@Clearanceman2 He's talking about the teabag looking thing. The actual filter. He didnt change it and Im trying to figure out why. Is it a secondary filtration system?

[@Clearanceman2]

@@bjornefellhanded9708 It's just a prefilter to catch big crap in the tank. My tank was spotless so I did not change mine but it doesn't come with the filter so if you want to change it, you have to buy it separately. And next time definitely going to buy the entire unit.

[@thearchitect4726]

Thanks!

[@Clearanceman2]

I actually ended up buying the filter. Wish I got the whole chinese unit for $70 which is what I was going to do but then I thought about how long subaru fuel pumps last and I got the OEM filter. Couldn't have done it without the video. The only thing I might add is I don't think you need to take the fuel sending unit off. And I didn't watch the first part so I didn't remove the negative terminal or the fuse. I didn't have a pressure issue but mine is 2008 YMMV. Next time I'm going to get the whole unit.

[@Jays22b]

great vid buddy. should remane title to how change pump also. I been looking for days for this vid. Get way more views

[@CarsNToys]

Thank you. Cheers.

[@stuntcardriver]

Why don't they use an external fuel filter? I have a subaru crosstrek. I will be waiting for my pump to fail to change this.

[@SteedDigital1]

That's up to you but I won't be. if that filter failed, where do you think sediment and such is headed.

[@351cleavland]

No where. If the filter "fails" it will be completely clogged. The engine would then have intermittent issues with fuel starvation. The filter isn't suddenly going to let all the stuff it collected out into the engine. That's extremely unlikley.

[@davidbryant88]

the filter is $20 on subaru parts.com

[@hallkbrdz]

That's for the sock filter on the end of the pump. The "tank" filter is more expensive.

[@hallkbrdz]

I agree - I hate internal filters. Tempted to just gut it and use a cheap external one next time.

[@no12run2]

Thank you for the video! Good attention to detail and high quality video. Assembly seems to be the better choice if you have the dough. Goodluck with the filter itself.

[@timgreening4305]

On older outbacks the filter on the fuel pump assembly is called a strainer. The filter is under the hood near the battery.

[@ypoora1]

Yet on my 2000 Legacy it's also in the tank in a little screw-off "cup" on the sending unit. Very odd because on other Legacy's of this generation it's under the bonnet!

[@Lightsout89]

I dont understand why plastic had to be changed?? The actual filter on the pump wasn't touched it was simply the outer housing of the fuel pump assy 🤔 now im asking my self why that needs to be changed and what would it possibly do.. or old mate was ment to change that little sock on the end and he didn't know.. someone please set my mind straight its absolutely confused right now

[@digits8490]

Grouse video mate, couldn’t of done it without your walkthrough

[@DavidStrchld]

I had the same answer from Subaru, wait till there is a problem. And that's what I did. No issues with that particular item after 310,000 miles and still going. There is a series of failures that is spelling the demise of my beloved 'roo, and I am currently shopping for my new ride, but a fuel filter problem has never been one of them.

[@CarsNToys]

Thanks for the heads up. I recently cut open the old filter and it looked perfectly fine. Cheers

[@sezwo5774]

just don't say detonation because of bad fuel/air ratio (clogged fuel filter) destroyed your cylinder rings and ruined the engine and you're happy you didn't have to replace the fuel filter :))) The turbo variants of these engines are very sensitive to bad fuel/air ratios!

[@dannymartinez8522]

@@sezwo5774 yup clogged up fuel lines leading to lean plus all the dirt and grime going inside your motor. It was strain your fuel pump as well leading to die out

[@AngelAngelescu]

Hi! I wonder why you did not change the filter part of the assembly? That fabric part that is attached to the pump.... Isnțt that the part that filters the gasoline?

[@bjornefellhanded9708]

Im wondering the same thing. Im about too run this service but that assembly reminds me of a motorbike service I did years ago - the most important part to change out was that teabag.

[@openleft4214]

Curious to see if you can by pass this filter and just add your own outside of the gas tank

[@marauder7412]

Very helpful video. I just followed this video for a 2008 Outback 3.0r. Thanks

[@yosefyitz]

I'm confused. Subaru part for my 2016 Impreza is 42072AA120, appears to be some little object nothing like this video. There's no canister to replace according to Subaru parts site. Any input is appreciated.

[@dewanehill1435]

Great demonstration!!! What a major PITA.

[@richardpflieger2049]

Superb job on this vid!! It looks easy to this old Transmission rebuilder. I will surely do this when she hits around 60K.IN fact ,I look forward to it .Taking preventative measures pays big dividends. Thank you for the astute video.

[@CarsNToys]

Thank you. Appreciate the feedback!

[@christophertreatmuniec1584]

why not just replace the strainer? thats the only thing interacting with the liquid fuel?

[@nawarhanna2104]

hello sir i have nissan almera b10 i had replaced the intank fuel filter with aftermarket one the micron gage of the new filter is very small causing pressure drop in the injectors bar my question is can i inject a miture of oil and gasoline fuel a high viscosity mixture in the new filter to increase the porous pf the new filter the flushing it with gasoline fuel to remove any oil contaminants then reassembling it ?please help me

[@JoseSandoval-ic5xe]

Hi if any of those o rings are missing can you lose fuel pressure?

[@ellogovernor12345]

So, I took everything apart on the passenger side and replaced the pump but car wouldn’t start once back together. Question is, that rubber disc part attached to the access panel is behind the drivers side. Did I change the wrong one or is it just one only in the passenger side?

[@JonathanVaucher]

Man, I broke two fuel assy mounting studs by trying to remove the eight bolts (hit it with PB blaster for few hours before, bolts were quite rusted patiently and slowly trying to turn the nuts without applying to0 much force). Studs in the 12 o'clock and 7 o'clock sheared right off. Still some nuts I could not remove (11, 8 and 6 o'clock). Now I can't remove the assy to replace fuel filter and gasket seal. And I'm afaid to tighten it back up as is and break more studs. Left it overnight with more PB-blaster. Don't know how to get out of this mess without having a new fuel tank installed (1800 canadian dollars). I'm quite pissed. 2008 Impreza 2.5i with 62000 miles. Timing belt, tensionner, pulleys, spark plugs, coolant just replaced 300 miles ago.

[@wittohasago]

Completed the task and your video was very useful. I don't understand why you cut the lower tank holding tabs off as they are required again to clamp the lower tank on to the upper part both of which are reused. Seemed a bit odd... undoing one tab at a time and keeping a widish screwdriver blade in the slot keeps it from closing. The entire process took about an hour max... thanks again... the circlip was where I had stumbled. Also I found no real need to remove the tank level sensor from the lower outer tank either. A job made easier for me because you took the time. Thanks mate. If you seek "ET art by B Witten" on YT you'll find out why the Pyramids in Cairo are REALLY here. The Pyramids tell us how the Earths axis was tilted and what happens when it straightens.

[@babykraig]

Hey, I find your channel very interesting. Pressure keeps building up in my 2008 impreza fuel tank. How can i resolve this issue. is there a pressure release value canister??? HELP!

[@C0R365]

Its strange because everyone is replacing the fuel pump assembly, yet few are replacing the filter screen. So can anyone clarify exactly what parts need to be replaced? I feel like the pump screen is the only thing that needs to be replaced. A $20 part. Versus the $80 assembly? Someone please clarify.

[@dirt-rippers1018]

So is their another fuel filter anywhere else besides in the fuel pump

[@elnene4091]

My friend help me please, I have. A Impreza 2009 2.5i what I just bought a couple months ago, and when I’m driving and push the brake my car dies, stall, and start again with no problem. That happen when I’m I the light or stop the car in a corner, I really dont know what is the problem. But stall when I’m brake 🚘 😱😱 please

[@thearchitect4726]

Awesome, thanks for the info. very helpful. I wonder why you opted for gasoline on the rubber seals and not a small amount of rubber grease, that's what I opted for when i did it for a client.

[@kramsuave]

What’s the name of the black part next to the fuel pump

[@antonshadyrya2088]

The ONE thing I really dislike about my subaru impreza is this new fuel filter. The dealer told me the same thing they told you. They say they don't service it until it badically fails. Being a marine diesel engineman, I deal with all kinds of filters a lot and the way you keep something running trouble free is by having easily accessable filters and changing them frequently. This is just makes it plain annoying. Anyhow, thanks for the video. Can I ask why you go through all the trouble and not replace the strainer?

[@CarsNToys]

Thank you. I called three dealers and they all told me the same as well. In fact, one transferred me to the parts department. She had no idea what the hell I was talking about. I couldn't get my hands on the strainer in time. Thanks for commenting. Cheers.

[@antonshadyrya2088]

Do you think you can do a coolant change on one of these? Really enjoying these impreza service videos. Is the plan to hit all items from the service manual? Thanks again

[@CarsNToys]

Thanks. I appreciate the feedback. Probably the power steering fluid next and then the coolant. Just trying to cover all the bases as the car racks on the miles.

[@meez5804]

Anton Shadyrya I was thinking the same thing.

[@SteedDigital1]

what year was this? newer ones use electronic power steering.

[@egx161]

Did I miss something? Where is the new filter? Does it come with the motor? Thanks

[@TomCourtney]

What a pain in the ass. Thanks for the share, i'm just going to get the whole assembly.

[@CarsNToys]

Yes, you'll save a considerable amount of time.

[@myollinir]

yeah.... im just gonna buy the entire assembly for sure HAHA thanks for the super in depth video

[@kartboarder22g17]

WTF, what a crazy job once you get the fuel pump out.

[@rio9999]

Great video. Thanks for using a tripod and stand. Your attention to those details made all the other details that much easier to see and understand. Thanks again

[@CarsNToys]

Thank you. Glad to help.

[@hpsportsfanatic]

Is there an easy way to test the pressure to see if it is going back? Wife’s car is slow to turn over after sitting overnight.

[@olsidema5875]

Not sure if I missed it, but you the only thing you replaced was the plastic housing. The filter is that flat bag attached to the pump.

[@CarsNToys]

The filter is located inside the plastic housing. Here's a vid of the filter being cut open - kzbin.info/www/bejne/nZvMeX6iapmjqNU

[@eTriumph0719]

I followed this completely. Now the fuel pump isn’t pumping sufficiently.could i have over tightened the metal ring holding it in place?

[@wyattoutlaw2370]

Does that mean it’s the cap on the right side under the rear seats? Mine has a cap on the right and a cap on the left?

[@oldtimer6528]

If you buy the whole assembly, don't you have to take it apart to lubricate the o-rings with fuel?

[@hallkbrdz]

Need to replace the filter on our 2005 OBXT. But... darn if I can even find the part number for a part like this. I want to also put in a little higher pressure fuel pump while I'm at it (for a slightly larger turbo). But it seems there is none - and no aftermarket pump assemblies either? Seriously?

[@CarsNToys]

There are some very good Subaru dealer websites that list part number and schematics. Search online for 'Subaru parts' and click on any link that's indeed a Subaru dealer. Or, call your local Subaru dealer. Good luck

[@sealifett8395]

Hey do you guys think there is a way to bypass the intank filter and add an in line filter in the engine bay

[@DavidStrchld]

I was thinking about that, but the filter is before the fuel pump and protecting it. Adding a in-line filter after the pump may protect the injectors but would most likely hasten the demise of the fuel pump

[@RoadTravelVlogs]

This would be my next project on my forester. Thank you.

[@beethovenopus2726]

Excellent vid pal. Thanks for this. Going to try it on my wifes Subaru outback ltd.

[@VKSgtSLaughter]

Great video and fantastic step by step instructions. Thanks!!

[@marcorancourt8238]

Does this fuel filter fits on my wrx 09? (Part n°42072AG140)

[@haywoodyoudome]

11:58 whole assembly is around $300 and the filter is $20.

[@Mr-Universe82]

Always follow your intitution and manual when it your subaru and it's maintenance.

[@egx161]

What’s the part number for the fuel filter that you replaced? Thanks

[@VaughanMackie]

Does a dirty fuel filter cause loss of power?

[@r.b.l.5841]

not sure when they changed this but some models/years have a secondary filter in the engine compartment by the driver side strut tower - easy pasy to change filter there. could be added for others ?

[@CarsNToys]

Yeah those a incredibly simpler to replace.

[@DrRyan82994]

ah. i think the full assembly is the play for my 138k mile guy, and i also won't be in a rush to do it. safe to assume mine has the original, and it doesn't run a m a z i n g, the computer reads 18mpg lol, commute got a lot shorter recently but that's still pretty extreme. but i'm sure i have other issues too i should probably nail down first

[@Murmeltje415]

The real estate Lady watching you with a stern look from the newspaper ad ^^

[@songhong5482]

Very detailed video, thank you for your guiding. Subaru is not as reliable as Toyota Camry. My first and last car. Lots of issues.

[@nonyourbuz5805]

..I know this is old...but...why @ 20:50 would you have to cut the clips ?...can't you just lift them ?...

[@ziadkhalaf198]

So to make this short: Either spend $70 and go through this long and tricky task OR get the Fuel Pump & Housing Assembly as one unit and just replace it with old one for $500 (I'm thinking SPECTRA PREMIUM SP4116M). Dealer says "The manual is old info and they stopped servicing the fuel tank since 2006. Subaru service will the replace the entire assembly for over $600 and that's in case there's a problem"

[@sunny820]

I used some seafoam in my gas causing low idle. General consensus is that my plugs are clogged from the carbon gunk, or that my fuel filter might need replacing. I'm hoping after this tank of gas with seafoam the issue goes away, otherwise I may replace both plugs and fuel filters. Only at ~90k miles on my 2011 and have used seafoam a few times before over the last couple years.

[@SteedDigital1]

Or do regular scheduled maintenance. the plugs aren't as hard as people make it out to be.

[@SteedDigital1]

basically this. I got as much footage as possible when I did mine so I'm uploading that next week cause I see toooo many people scaring newer owners off. the difference of $60 for the plugs or $300 for the dealership/shop to do it can be huge for struggling families. there is no way I could have got the plugs done on time with the maintenance schedule if I had to take it in for plugs and filters. too much money all totaled.

[@dixoncider7256]

I thought the filter was the strainer on the end of the fuel pump. Is that part not replaced?

[@Redzircon]

I think the filter is a foam cylinder inside the metal cylinder ( the foam we did not get to see) - it was why I was watching to see how bad it was. Our Subari impreza 2010 hesitates between 2000 rpm and 3000 rpm, but recently moreso (BTW i just changed the air filter).

[@TheGonso35]

He did not replaced the filter , at least on camera. The little sock strainer IS the only filter. Toyota uses that same assembly and "last for the life of t he vehicle ". If ain't broken I would not replace it. You are asking for trouble. Braking brittle pastic, o rings that do not reseal after reassembly.... Nice video , very detailed. Great info for pump replacement.

[@reecespieces9630]

Great video mate exelent video views makes it so much easier to do because we can see what you are actually doing 11/10 thanks very much

[@diriazi]

Wow you sure know what you're doing. GREAT vid.

[@MichaelPSmith-mps]

well, how screwed am i? I was removing the screws holding the pump to the vehicle. The 8mm bolts. 3 of them broke!!!! 3!!!! Not sure what to do now. they aren't next to each other, but 3!!

[@yhalabi1]

Excellent and informative video. Does Subaru Impreza 2015 have the same system?

[@bmxhotsauce]

might as well change the fuel pump as well since your there. Anyone know the FP part number ? great video.

[@mnapier61]

That's insane! Great video. Well done.

[@lawrencecavens5760]

Therese one step you should also include is to remove or loosen the gas cap in case of pressure build up.

[@JacanaProductions]

FYI up to 2004 OB pump and filter are different - Part Number: 42072AE00A

[@CarsNToys]

Thanks for the heads up.

[@TheRouteShow]

can you cut open the old filter and show us the interior

[@CarsNToys]

Sure. I'll take care of that shortly.

[@michaelmardini346]

Yes. I was also expecting to see the filter. Being in canada/usa, what does look like my filter after 230k km?

[@michaelmardini346]

@@CarsNToys reminder ;-)

[@bjornefellhanded9708]

@@CarsNToys 4 years later - but thank you. About to do this service, Good vid.

[@serendepia6635]

Excellent video!!