Subaru Legacy Outback 2.5i 3.6R Fuel Filter Replacement

[@GuyPetersen-d6n]

Everyone who's considering doing a 'How To' auto repair video on KZbin should have to watch this video before diving in. In a word, it was perfect - No talking, excellent video quality, clear and concise instructive text on the screen, clear views of all part numbers needed etc. Well done.

[@bmwrules28]

At 71,895 just changed the fuel filter for the good old Rex. Thank you thank you thank you Mr. Subaru man I can’t thank you enough for your videos. I followed your steps exactly as you said (even though the 17 model year WRX is slightly different) and got the job done today. I’d like to suggest for others, it may be easier to run the tank down close to Empty (not all the way of course) when relieving the fuel pressure to avoid spillage in a garage or something. Definitely took most of the day but I put paper towels, rags, and covered all of the interior (I have the Limited model) to keep the leather same as was from the factory. Also the clips were slightly different from the fuel lines and minor differences but I strongly encourage others to replace the gaskets (a,b,c,) and stick with OEM always. The filter definitely did a good job as when I took it apart I saw the debris from all the years refueling. Thanks again!!! And happy Easter!!

[@johndicarlo225]

What's the difference with OEM and a reputable aftermarket model with new gaskets i wonder, would it just require a reinstall every 50,000km instead of OEM 80,000km change?

[@koryjohnson3333]

Was odd to hear Mr. Subaru remain silent. You have a great clear voice for narrating. I always like hearing what size socket or wrench. And loosen fuel cap does help prevent some fuel leakage. Thanks again.

[@cpmethod2]

All the indie shops around me and the dealerships say this is not required. (2011 subaru outback 2.5 Premium CVT at 135k miles). I live in the Austin area. The dealership gave a quote to get the entire fuel pump assembly done. It was almost $1000. Dude. Put the fuel filter on the outside! Sheesh. Nice video

[@BrianWalsingham]

If I ever do this I think I’m running the tank bone dry. That gas spewing out is something I don’t want to chance inside my car. Great video.

[@willschultz5452]

Its still going to do that because there is still a little pressure in the line. Just get some rags to put under the line before you pull the line off. You don't want to run the pump dry it's bad for it.

[@grampymeyer6603]

Thanx for the thorough video. Now I know how I'll be spending an afternoon once 'good weather' returns. I like the idea of the tank being

[@aaroncsantana]

Changed my filter this last weekend on my 2013 2.5 OB. A bit messy, but your video made it so easy. However, the little o ring/gasket thing that goes on the pump came off so I wasn't getting enough pressure. Realized this was the issue after I saw it in the old filter unit. Had to do the whole thing over. Can't wait to see more videos for this Gen!

[@Alniemi]

Well im sure it was a lot faster the second time ;) Ive done similar mistakes and re did everything several times. happens to the best of us.

[@liamkirkham8054]

I found undoing the fuel filler cap (after running the engine) and allowing the pressure inside the tank to equalise for 30 seconds or so reduced the amount of remaining fuel in the fuel lines significantly. A LOT less mess :)

[@bigdaddymak1439]

And do this with less than a 1/4 tank!

[@weirdbeard1980]

Smart! That's one of those things that seems obvious but you don't think to do until after your ankle deep in gas

[@ronaldfonsecaumana7922]

😅😅😅😊😅😊😊😊😊😅😅😊

[@emagowan]

2019 Limited with 22k. Just got the recall notice for potential impeller deformation, made an appointment with the dealer for tomorrow. After watching this I'd rather they give me the pump and do it myself but it doesn't work like that. I have zero experience with their service department and no reason to think they won't do a good job, but frankly there's only two mechanics in town that I trust to do a good job besides myself.

[@bullnukeoldman3794]

Another good and timely video (for me, at least). My '11 OB 2.5 suffered fuel delivery problems and I figured either the filter (never changed in 180k miles) or pump slip-sticking. I have an entire new unit, pump and filter - if I'm gonna do all that unbolting and re-gasketing I'm only gonna do it one time and be done with it. LOLOL! Great stuff, my friend.

[@macboy19]

Thank you for the video! You make it look so easy - reading the actual instructions made it look daunting. Great production and I'm happy to see things about the 3.6R.

[@MrSubaru1387]

You're welcome. Glad you enjoyed the video. 👍🏻

[@toffeepie1878]

​​@@MrSubaru1387Is it recommended to do the fuel filter on the EZ30, basically the same as this? That's news to me.. my MY08 3.0 Spec B is on 140k miles and don't think anyone has touched the fuel lines, I noticed my fuel trims ( long term) are a bit high, this could be the reason.. Bank 1 Is minus 4 percent on idle, bank 2 around 10 percent. Car drives fine, all O2 sensors been replaced, no codes tripping just thinking about the fuel filter...

[@cpmethod2]

Just got this done. Took me almost two hours but got it done!

[@davidmartinez7385]

Excellent and very helpful video. No music or silly stuff just right down to business great job!

[@Newova5]

This also is the same for 2014 4-cylinder outbacks. Thanks for the excellent step by step!

[@joeberz6691]

Thanks for all the help, just changed out the fuel filter on my 2014 Outback. The video was very helpful, good job and keep them coming.

[@MrSubaru1387]

You're welcome. 👍🏻

[@nancyoffenhiser4916]

This is one I think I'll have the dealership do! Great video!

[@nancyoffenhiser4916]

I have an even better idea Mr. Subaru.. I'll buy the parts and pay YOU to do it! 😆

[@microsoftbighard]

Nah, this is not overly difficult. Just snap on and slide off parts. I'm more concerned about if or not I have access to the pump in my sube

[@marissaramos7025]

Good idea lmfaooo same.

[@8eSix]

My dealer quoted me 500 just for labor. I said Nope!

[@gohst777]

Nice job man thanks for the great videos What a great design by subaru !

[@ToxicityAssured]

This video was great. I'm no longer worried about changing mine!

[@marianstetca9368]

Edit: Part nr: 42072AA121, that you refer to as the "sock" or "strainer" is not for the fuel pump. Instead is the fuel filter for the fuel sub level sensor on the left side of the tank. The main fuel pump and filter is on the right side and is a different pre filter sock that doesn't appear to be sold separately from subaru.

[@Houdini.C]

Once again great video very detailed and to the point! I do have to say though I do like your more recent videos where you talk lol.

[@jvs2543]

You are MR. SUBARU thanks love your Videos.

[@mdonola]

excellent video, very well explained and recorded, congratulations

[@MrSubaru1387]

Thank you.

[@Tisza33]

​@@MrSubaru1387 Great channel you have! Question. I live in Hungary - Europe, I have an EUDM Outback BR, 2010 version with 2.5 i engine. I have changed the in tank fuel filter recently. In these models, the reserve fuel line is coming through in the tank above the cardan shaft tunnel, and not on the top of the tank. But the working method is the same. While the pump sucks fuel from the main chamber, also fuel coming from the reserve chamber because of some kind of venturi effect - to my knowladge some. Here comes the problem, when I installed the new filter I was driving the like before, when I noticed the fuel run out, however the fuel level gauge was almost below half tank. I was wondering how....then I figured out maybe I forgot to put back something on a right way? I took out the filter checked, everything was fine. Next time I run out of petrol again...gosh. Nowasdays I refuel when I see half fuel to avoid this because I have lost - donno what is cause this problem, cause I did everything on a right was. PLEASE HELP!:D

[@Alniemi]

I wonder how long those plastic parts will last. Im just in the process fo changing my fuel pump on my 1996 legacy outback. Its all brass and in perfect condition. Even still with the original pump manufacture stamped 95. Nice video. was fun to watch even though I dont have this vehicle. Those 6 cylinder outbacks always peaked my interest. It just hard to run anything but an ej22 once I learned all the perks of that engine.

[@darryldelost6185]

Wow! What a great video. Thanks for sharing your expertise.

[@nathant78]

Love the interior color.

[@MrSubaru1387]

Thanks. 👍🏻

[@weirdbeard1980]

Mine is black. That burgundy looks sharp

[@Mike_44]

A job well done. Thank you for another great video!

[@kevinthompson2308]

Would have loved to have seen a segment in this video on a disection of the filter to examine the particulates captured by the filter. How dirty was it? Good video, though. Thanks for doing it.

[@yangeryanger]

nice. gotta do this. hope it's similar on my 2012 forester and my 2017 legacy...

[@weirdbeard1980]

One last recommendation, open the gas cap when you arw de- pressurizing the fuel system. I had almost now gas come out of my lines. I also used a couple cheap hose clamps I had from what I did a head gasket job on my old subie

[@MrSubaru1387]

That's not how that works. The tank isn't pressurized. The line is to the engine.

[@weirdbeard1980]

@@MrSubaru1387 well I had the hose clamps on so I guess that's why I didn't have any gas coming out. I literally had like 2 drops of gas drip out. I spilled a tiny tiny bit when I pulled the filter out but I used a small, plastic waste basket waiting and just stuck the it in that so it wouldn't piss gas all over. But i must say, you are pretty slick. Taking that bracket out was very difficult! You made it look like the thing just comes right out. It took me 20 minutes of muscling and even had to bend that opening a little for it to come out.

[@weirdbeard1980]

@@MrSubaru1387 all that aside, these vids are a friggin god send my dude! Sooooo helpful!!

[@garlicdoood]

What's a way to relieve the fuel pressure when your car won't start? I'm suspecting my fuel filter is clogged or the fuel pump is bad. I also have a 2016 Legacy 3.6r if that makes a different. So far your other videos have helped me out. Thank you

[@edf1576]

I think I would have done this with a tank that was at least 1/8-1/4 full, looks like that tank is nearly full. Great video though.

[@weirdbeard1980]

In my car that bracket doesn't just slide out. I had to actually bend the that circular opening to get it out and hack of the lip of the old fuel filter

[@seanhoward8025]

Robert, I believe the fuel pump sock link on Amazon is wrong. It appears this is only available with the fuel pump, as it is not the one listed and does not seem to be replaceable separate from the fuel pump.

[@JI77469]

Just how hard is it really to get the whole module out without damaging the float? My buddy says it's really easy to damage it so I'm a little worried about that. The rest looks easy...

[@StingingnettIe]

what spray did you use to clean the debris from the plastic ?

[@kehi6257]

Just curious to know where the fuel that came out of the hose when disconnected goes. Hope it directly drips from the bottom of the car rather than sucked in the carpet.

[@JonathanVaucher]

My 2008 Impreza 2.5i has a gas fuel drip (but it only leaks when tank is full: between completely-full and 7/8-full). I think it's either the fuel assy cover that's cracked (or gasket seal leaking) or I have a rusted tanks (rust pinhole or something). I thought the fuel filler neck could be rusted out, but it doesn't seem to be the right location for that kind of leak. It leaks gas just in front (about 12 inches forward) of the front edge of the rear right tyre (so too much in forward to be the filler neck IMHO) and slightly going towards (around 18 to 24 inch) the midline of the car. There is a plastic cover over the right side of the fuel tank, and fuel is dripping by one of the holes of that plastic cover (the lowest hole of the cover, which is kinda in the center of the cover), seems to be the right location for the fuel pump assy. I noticed the fuel leak when filling at the gas station. I might have overfilled the gas tank a bit (was pushing a bit more gas in even though the fuel nozzle trigger was "clicking" tank full), then I smelled the odor of gas. I hope it's the fuel assy gasket, as I am about to change the fuel filter and gasket (already have the OEM replacement fuel filter and gasket). Maybe it's the gasket leaking. Maybe it's a loose fuel line connected to the fuel pump assy. Maybe it's a crack in the plastic fuel pump assy. I just hope it's not a rusted fuel tank (expensive fix) ! I do antirust treatment every year, but I live in Canada (salt on the roads). If it's the tank, I'm probably going to get rid of my impreza, but I'd be very sad as I love the thing! It's a 2008 2.5i non-turbo but it's only 99000 km (62000 mile). I just had the Timing belt/tensionner/pulleys done (low milage but 12 years old). Also did a new coolant flush (OEM blue subaru coolant). Changed to new OEM spark plugs. Changed the PCV valve. Cleaned the MAF sensor. Just changed my brake rotors and brake pads on all 4 wheels (and sanded, and painted my calipers, redid the square seals and caliper piston changed). Did the front swaybar links and bushings. Did a ball joint. Front CV axle looks good. Brake fluid flushed. Recharged my battery. New synthetic 5W30. Man I hope it's not the tank that's rusted ! Do Subaru Impreza gas tank have a reputation to rust easily ??? Thanks for the video. Thumbs up !

[@LeggySti]

I need to do this!, thanks for the video!

[@MrSubaru1387]

You're welcome. 👍🏻

[@lokilawliet5041]

Oh! The filter is actually under the seat? I was worry that I need to remove the whole tank!

[@MrSubaru1387]

Nope! Easy access.

[@JonathanVaucher]

@@MrSubaru1387 But don't brake any of the 8 studs holding in place or you're in for a 1200$ new fuel tank replacement...

[@Boxycar79]

i’m assuming it’s the same location in a 2010 to 2014 Subaru Legacy

[@anthonydzikiewicz2192]

Excellent Video ! I am going to do this procedure. I am wondering if you are changing the filter, is it a good idea to change the fuel pump filter too?

[@anthonydzikiewicz2192]

just saw my answer below. Ive ordered one of those too

[@brianskinner4328]

They sure don't make cars like they used to. More difficult than it should be. Too bad they couldn't have just put the fuel filter externally. By the way awesome videos. I love them. Keep on making please

[@OhioBahn440]

my 2004 Impreza had an external fuel filter.. right in the engine bay. Cost 5 bucks and took 5 minutes and one srewdriver to change it. These filters are very expensive idk why they changed it

[@pateric8874]

For real. The many of the 90-2008 Subarus had it right on the strut tower

[@JenP2776]

All this just to change a fuel filter? Yeesh! Am I capable of doing this? Yes. Am I looking forward to it? Definitely not. I assume it’s fairly easy to install a new sock/filter part, hence not showing that part. Any tricks or suggestions on that part? Also, if I’m smelling the occasional sulfur smell, do I need to replace the whole pump assembly? Or can I just replace the sock/filter?

[@weirdbeard1980]

And I cleaned it well prior to getting into the tank but with all the prying and jiggling I knocked a bunch of debris into the tank. I would recommend having a turkey baster handy to suck all that crap out so you don't put a bunch of debris into you new filter

[@Jordan__Sloan]

I think that’s why he tells you to clean it off first

[@weirdbeard1980]

@@Jordan__Sloan so you can clean it off as well as you want. When you remove the gasket there is still gunk that can fall in. I do mention I cleaned the area before trying to open it. Are you trolling here or....

[@excampopa]

2015 Outback 3.6 any different? Subaru parts shows different part number. Thx!

[@ghostrider2664]

Why did they make it so difficult? On 2002 impreza it was at the top in the engine bay. Pop it off....pop a new one on. It was brilliant....now this? Not a step up, if you ask me.

[@gatekeeper65]

This way the filter is before the pump, The pump will last a lot longer by filtering out any debris or particulate before it can damage it.

[@triarii_00]

full tank? brave. could you have disconnected the lines in the engine bay after cooling the engine as an alternative?

[@partyguy9]

The dealer told me that the filter and pump is 1 part and you cannot get the filter separate for my 2005 legacy 2.5i. is that true? I wanted to change it at 144k now but not worth $500 for just a filter

[@Mihogan]

How did the original filter look? Have called back Subaru dealerships near me and they both told me the filter is lifetime and the 60k mile interval is a remnant from older Subaru... Not saying I believe them but just wondering if I can last til maybe 100k miles?

[@MrSubaru1387]

Yes, it should be fine to 100k miles.

[@Mihogan]

@@MrSubaru1387 thanks for responding buddy. Think 150k is pushing it?

[@MrSubaru1387]

Like Subaru said, most people never change them, does it make it right? No. Can you get by? Yeah.

[@Mihogan]

@@MrSubaru1387 well put. Will keep that in mind. Thanks man

[@redvw5963]

At the 72,000 service for my 2015 Legacy the dealer also told me not to change the fuel filter.

[@jonathanfriz4410]

Great video. What about the "tea bag" in the fuel pump? that little filter is not change?

[@MrSubaru1387]

Yeah. The sock. I forgot to order it when I was doing to replacement.

[@jonathanfriz4410]

@@MrSubaru1387 thanks man. Great tutorial

[@marianstetca9368]

The sock, part number: ‎42072 AA121 does not fit with the pump. The connection is completely different

[@JohnResciniti]

If I'm doing the filter, I'm certainly replacing the pump as well. I'm at 150k miles and getting p0171 and p0174 codes. Anyway can I get a whole new pump filter and sock as one assembly and just install the whole thing rather than swap the pump over?

[@Jordan__Sloan]

Thanks Mr. Subaru!!!

[@SeanMartin-t5z]

I need to check if my fuel pump is turning on because when I take off the line to my carb. There is not a drop of gas in it

[@Subieej20]

I'm kind of confused, can I not just change the actual filter alone?

[@yaroslavarabok4756]

Good video! What about 2.5 EJ253? According to maintenance there is no replacement at all...... I'm going to do the same job for it. Maybe some specific tips?? Many thanks

[@MrSubaru1387]

They do have a similar replacement filter built into the fuel pump module.

[@yaroslavarabok4756]

@@MrSubaru1387 Thanks 👍

[@weirdbeard1980]

Was that just break cleaner you sprayed to clean the top of the filter casing?

[@cslapler007]

Questions: 1. New gasket and strainer for the fuel pump re-installation was recommended, but I am not sure where they are located. What is the bag-like thing connected to the fuel pump? Is this the strainer that is suppose to be replaced? 2. I was thinking of running SeaFoam through the gas to clean out lines, fuel injectors, cylinders, etc. Do you think this would also work to clean out the filter or should it be removed for other reasons as well (like degradation)? Or perhaps SeaFoam will break loose debris that won't be good for the rest of the system? So I guess I'm not sure if I should do this before or after a filter change... Looking forward to your thoughts.

[@ednksu]

Gasket was the back thing under the fuel pump assembly. The strainer was the dark brown thing, sometimes called a "sock" attached to the silver fuel pump he pulled out of the white fuel pump assembly. He changed that as well to that yellowish brown thing attached before reassembling the white unit.

[@kylerworley355]

Hey MrSubaru, I have a 2011 legacy 2.5i premium, my strainer appears to be different than the one you have listed, mine also didn't have the o ring at 11:32. Do some of them not have the o ring?

[@noligarcia5200]

Very helpfull. Thanks🙏

[@TheAdvokatt]

Good job !

[@dirtwolfmtb]

i miss the engine bay mounted fuel filter.

[@Jun_G5]

Is it the same process for 2018 Crosstreck?

[@asanchez3112]

Do you have a video on a 2020 wrx fuel filter change and parts list.

[@DanielField2023]

It's a kind of tricky to exchange from the old to the new filter need to be patient to reinstall it. $88 buck for a new filter wow

[@roberthogan2297]

Excellent video

[@sevaborshevski3369]

why didn't you change the filter?

[@robertscottII]

Thanks for the video. I bought my first subaru, an outback, in 2013. I'll be putting a fuel filter in it next week. I've never done much maintenance but plugs and oil change. It has 125k miles. I've never done a cvt oil change or fuel filter b/c my owners manual doesn't show it being required to replace. Is this just common knowledge amongst subaru owners or is there a secret maintenance manual?

[@willschultz5452]

That's because Subaru claims neither one of those ever needs to be replaced so they don't put it in the manual because they don't want you messing with it🙄. Really they should be serviced though

[@vitex1231]

I have a 2010 2.5 Outback L. My maintenance and warranty manual shows fuel filter replacement every 60k miles.

[@donjalex2262]

Nice, clean engine!

[@ronodowd9760]

I had subaru parts dept. On the phone. The rep told me I was wasting money and time. He was adamant about. He was willing to sell me the filter but kept insisting the in tank filter NEVER needs replacing. I finally gave up. My mtce biok says do it at 72k. I'm at 84k. Guess I'll order it somewhere else

[@valeo29]

I have some bad gas in my 2017 Outback 2.5. What is the best way to syphon some of the gas out to dilute with fresher gas? Obviously a syphon isn't working, and the tank it full.

[@Alniemi]

ahh i didnt watch long enough, that whole plastic behemoth is being replaced. man that is a nice car and i appreciate the video. but ill stick with my 96 ;)

[@rajg7342]

The new part is labeled Fuel Filter Assembly. But the actual filter is attached to the Fuel pump, why wasn't that changed? The part that was changed had nothing to do with fuel filtering, it was a fuel level sensor.

[@MrSubaru1387]

The fuel filter is made into the white plastic assembly. Thats the sock that goes on the bottom of the pump.

[@rajg7342]

@@MrSubaru1387 Sorry. I understand it now. Thank you. I was looking at the Fuel Tank assembly drawing and there were two openings. The bigger one was for the Fuel pump and filter, and the smaller one was for the fuel level sensor. I got the two mixed up. Thank you.

[@X340n]

Hey man I know this is a super old video but is an 08 outback 2.5 the same? Been having some terrible hesitation on full throttle but no codes, thinking about trying to service the fuel filter cuz I'm sure it's never been done

[@3521Rookie]

Gosh that is the longest I have I seen a vehicle run after pulling the help pump fuse! My Silverado dies almost instantly! Subaru’s are very fuel efferent and fuel sippers!

[@MrSubaru1387]

Yeah, I was surprised myself. Haha. I'm used to them dying quickly after cutting the power to the pump.

[@davida7370]

thanks sir

[@johnhornung7139]

how do you check fuel pressure from pump.??? i am getting low gas milage on my 2009 2.5 legacy

[@a1081042]

An inline filter is so much better.

[@ghostrider2664]

Exactly what I said. This is difficult for no reasonj;

[@rpmautoreviews9249]

is it in the same place / same job for 2018 Legacy 2.5L ?

[@Boxerdad27]

I think I'll just use top tier gas brands and not let my tank go below 1/4 tank. Then hope for the best.

[@Houdini.C]

Would you recomend replacing the sock as well I noticed that you didnt replace it in this video. I'm getting ready to replace my filter.

[@MrSubaru1387]

Yes. I forgot to order it. Haha.

[@Houdini.C]

@@MrSubaru1387 yeah I was just wondering I'm going straight to my local Subaru dealer for the parts and want to make sure nothing gets forgotten. I have the 3.6r as well i was feeling a little stutter in low gear i replaced the plugs and it still does it so I'm going to replace the filter and see if that does anything unless you have any suggestions....

[@sinco2]

@@Houdini.C did this work out?

[@Houdini.C]

@@sinco2 yes I have a 2010 outback I purchased the sock off of Amazon and got the filter from my local Subaru dealer

[@silktheshock]

Hey how're you i love your videos man. I have a 2015 subaru legacy 2.5i premium automatic cvt with 236546 miles all highway believe it or not haha. And it still runs terrific and its clean i babied that car pretty much from the first day i bought it brand new till now. Would you recommend changing the fuel filter and is it located in the same location? Ill look forward to your response thanks so much MrSubaru1387 👍😊.

[@GustyCrosswinds]

do you know where the fuel filter on a 2011 tribeca is located?

[@snosqrl]

Would this be in the same location on a 2010 2.5i? Also I went to my dealer to get the part and they said its a lifetime part and they don't replace it??? However my wife's fuel gauge no longer reaches the "F" when the tank is full and the enginge has been stalling out at idle. I'm pretty convinced its a fuel flow issue... thoughts?

[@MrSubaru1387]

Yes

[@MrSubaru1387]

Can't say without measuring fuel pressure. I'd guess there's a fuel float issue if the tank won't read full.

[@Batty22]

is this same for 2015 2.5 outback?

[@ciphernemo]

Run until it dies after stopping the fuel pump... does that hurt the fuel injectors at all?

[@MrSubaru1387]

No.

[@Jbennyho]

How much was the filter and any parts you replaced in the video? Great explanation video. Did the car smell like gasoline for a while afterwards?

[@MrSubaru1387]

Like $60. Nope.

[@rocksy85]

means your seal isn’t correctly installed if you can smell gas in the cab

[@andrewpoe3047]

Stupid question but how do you cycle the ignition without starting it with a punch button start?

[@corgiepic]

You probably figured it out by now, but you just keep your foot off the brake if you want to "key on" without it cranking. If you're doing it for the purposes in this video (trying to purge fuel), don't worry about it starting; it will just help it burn out the remaining fuel in the lines and quickly sputter out. If you want to crank it without starting for other purposes, you could remove the fuse for the fuel injectors, or if you have one, you could probably use a scan tool to disable the injectors.

[@bowrepublik]

Curious what the symptoms were that requires doing this or was this just general maintenance? My US spec outback 2.5L stalls when ideling. Say putting clutch in slowing to a stop sign. Rpm goes down and drops off to a stall lights on dash. Or if it didn't stall. Sitting at a light neutral no clutch in food on brake idle at its sort of normal 500 rpm but then drops and sometimes recovers but other times stalls. I've replaced the mass air flow sensor which didn't really help. The car I bought used was not very well maintained. 188k miles on the car. When I bought it I paid for a heads up rebuild including valve job. And exhaust work. Idle has been very bouncy since I bought it but now stalls all the time. Have to heal toe at lights to keep rpm up and brake at the same time.

[@ozziecrosby2092]

My nephew ran his 2014 Subaru outback low on fuel and now it runs rough. I'm thinking the fuel pump sucked up some debris from the bottom of the fuel tank. I'm thinking about just replacing the whole fuel pump.

[@JonathanVaucher]

Can overfilling your tank crack the plastic top of that plastic fuel assy ? or make the connected clipped-on fuel lines leaks at the connections points to the fuel pump assy ? Have you seen this before ?

[@ksmiles5333]

I have a 05 outback 2.5xt and can't fine the fuel filter .is it serviceable and a part # to do so and if so do you have a video for it

[@barrythomas6429]

wish my 06 Forester had this much wiggle room (:

[@sirpablo199]

Getting bad gas mileage , 18.0 MPG in My 2010 Tribeca with 160,000. Would it be wise to replace the entire fuel pump.

[@MrSubaru1387]

No. Don't just throw parts at the car. That gets expensive.

[@daniel_plainview_ftw]

Make sure the seal is attached to the fuel pump before sliding it into the new filter. don't ask me how I found this out, haha

[@michaelk24]

Did you have to do any twisting of the fuel module bracket? I am not able to get my bracket out because the top of it hits the metal body before it can be freed from the pump.

[@stevelynn5498]

The gas mileage on my 2012 Impreza (120K miles) has been suboptimal for some time (27 mpg on highway at best). Fuel filter has never been replaced. Would this job help?

[@mlvncgndhn9583]

Looks like same as fb25 on 2011 forester

[@jacob1850]

Is the number for the 3.6 42072aj060 or 42072aj050? I’m finding different answers everywhere.

[@johnmastr7901]

keep your head down buddy. are you close to the coast?

[@MrSubaru1387]

Nah, I'm in the upstate.

[@johnmastr7901]

@@MrSubaru1387 that's good. I've been in hurricanes when I lived in Florida

[@jonathanheywood3694]

How often should i start stop the ignition? Having trouble getting car started!

[@jonathanheywood3694]

I think I figured out my “no start” problem. There is a rubber grommet for the fuel pump that i neglected to transfer to the new filter. Will have to pick this up in the morning.

[@cokolino2]

off topi question, . Ive noticed you have thermometer in your ac vent, do you know what temp it should be blowing when AC is on ? My 2018 outback 3.6 blows around 50-60 with tendency more toward 60F and i feel its not cold enough ?

[@MrSubaru1387]

Usually Max A/C recirculate, I get 40° range.