CASTING A DIAMOND RING | STEP BY STEP GUIDE

[@ya9931]

Beautiful ring 😍 Your video deserves more attention! Hope to see more in the future 👍🏻

[@Bi_Nhan]

Thank you

[@PointmanOps]

Very nice finished product

[@danielclau1858]

Very nice Video - step by step for good learning

[@Bi_Nhan]

Thank you very much

[@Ozzy2341]

Amazing work my brother please make more videos :)

[@jamesstays7192]

WOW!! Amazing work!

[@Bi_Nhan]

Thank you

[@kelvinaguilar3360]

For a piece of the same size I use a cylinder that is just 1.25" x 2.18" and it has worked excellent for me. less time in the oven (approx. 1½hr) and much less plaster.

[@Bi_Nhan]

Thank you for your advice. I'll try that next time.

[@nicosdemetriou2585]

Hi kelvin

[@renezavala6574]

Nice!! Do you have to scale the ring at all in the 3D CAD model? Wondering if 14ct white gold shrinks when doing the casting.

[@Bi_Nhan]

I did not scale it, my casting never shrank, but got expanded a few times.

[@sarkistakessian1066]

Beautiful setting job

[@randallmccullough4876]

What resin do you use and what print setting for the printer?

[@Bi_Nhan]

I used Power Burn resin in this video and the setting from the resin website.

[@kvri-beats]

Can you tell me about your polishing machine?

[@weluvwilla]

NHAN THE BEST!!!

[@meeko81g39]

palladium white gold ? nice

[@Bi_Nhan]

No it wasnt.

[@Ozzy2341]

Love your kiln, where did you buy it ?

[@Bi_Nhan]

Thank you. I cant quite remember, either Rio or Stull

[@connormorrison8976]

I really want to cast an engagement ring and i have some questions about the process, is there any way i can message you?

[@Bi_Nhan]

Yes. There is a link to my facebook in the description. You can message me through it

[@kvri-beats]

Can I know what's your micro motor brand pls

[@Bi_Nhan]

It is foredom sr motor with quick change handpiece

[@kvri-beats]

@@Bi_Nhan thank you bro , can you give me a link

[@jeremytherrien5199]

Hello,I see on the picture of the video that you had a failed cast . I have similar issue . Can you list there what you changed to have good result please it would really help me . Thank you and Nice video

[@Bi_Nhan]

My flask casting temperature was too high, then I changed it to 1000f. There are a lot of reasons that can cause it to fail. Let me know if I can help

[@jeremytherrien5199]

Is there a way to contact you to talk in private . I just started my casting project and i have some question please . Thanks for your answer

[@Bi_Nhan]

You can connect with me on facebook at the link provided in the description above.

[@adamrobbins2091]

Ohh man I use cautery pens too, the ones I use have gold connecting the batteries lol

[@rajkumarverma6260]

Best video

[@michaelhobart8423]

The 3d printer software is ZBrush and Blender?

[@marotoworks]

How do you pass from 5:10 to 5:16? (before the magnetic chamer)

[@Bi_Nhan]

I cut off the sprue and filed the extra metal at the bottom shank.

[@ryanmundell3504]

what tools do you uses

[@badb1812]

Кольцо по итогу получилось хорошее. Но литьё с большим браком. Я бы даже не стал с ним возиться. Клиент который платит хорошую сумму за данную модель (при том если ещё с бриллиантами) заслуживает достойного качества от начала до конца.

[@gmjewerlyworkshop5556]

hola que tipo de resina usas?

[@Meiradiaadia]

Muito bom.....Parabéns!

[@barbaracovey]

Why not use a stainless steel whisk to mix the plaster instead of your hand?

[@grillzbytroy8870]

When u cast 14k yellow whatbos your preffered flask temp same 1000f as the nickel whitegold?

[@Bi_Nhan]

There is a video in my channel that I casted a 14k YG bracelet, casting temp was 945f.

[@grillzbytroy8870]

Thanks I'm getting ready to load a flask thanks brotha

[@grillzbytroy8870]

@Bi_Nhan I think I cast before the inside diameter of flask was settled at 945.f in other words the flask was much hotter than the desired 945 I should have waited a bit longer for inner flask to match oven temp. I use the centrifugal casting aka spin casting. Same flask temp as vacuum? Just triple checking I am loading up another flask and trying to get a perfect cast

[@Bi_Nhan]

@@grillzbytroy8870 I leave the flask in an oven at the casting temp for at least 1 hour. I have never used centrifugal casting so im not sure, but i guess it should be the same.

[@grillzbytroy8870]

@Bi_Nhan thanks again brother. Much 👏 appreciated from California

[@gabrielpasche690]

perfect

[@geovannycordero08]

Great video , questions whats the resin brand ))))

[@Bi_Nhan]

Thanks. Its Powerresin/burn.

[@ga9098]

Nice project! You cast and set all alone?

[@Bi_Nhan]

Yes, thank you

[@ga9098]

@@Bi_Nhan What resin do you use?

[@Bi_Nhan]

I used Powerresin/Burn

[@sportydelite]

@@Bi_Nhan did you use powerresin burn on the failed print as well ? Also what do you think went wrong with the first casting Investment powder ratio or resin not completely cured

[@Bi_Nhan]

Aaron Tucker : I used powerresin for both. I failed at first because I set the casting temperature too high , almost double of what it supposed to be

[@tacitozetticci408]

What CAD program did you use ?

[@Bi_Nhan]

It's matrix.

[@td7324]

this resin doesnt need post cure ?

[@Bi_Nhan]

I'm not sure if it does but I did not cure it, I just soaked it with denatured alcohol right after the print gets done

[@maxdavidovitch3559]

Bro got the dab charger sitting out

[@juba3498]

What metal is this? Do you mind telling us your burnout settings and metal temperature?

[@kvri-beats]

Wish you a wax printer you deserve more good things

[@Bi_Nhan]

Thank you. I appreciate it very much.

[@kvri-beats]

@@Bi_Nhan what do you think about the nsk motor instead of foredom

[@kvri-beats]

@@Bi_Nhan this one kzbin.info/www/bejne/jaWqi4J9f7Gaisksi=tx6YeRvlmeTJAKLY

[@Bi_Nhan]

@@kvri-beats I think that is a good idea. NSK is the best

[@Bokan.]

3:11 what's machine

[@Bi_Nhan]

Casting machine

[@Bokan.]

@@Bi_Nhan vibrating

[@ironmen0211991]

Nghi sao đúc cai nhẫn chut xí zô cai lap chà bá😏

[@Bi_Nhan]

Tại lúc đó chỉ có cái lap đó à hehe

[@ironmen0211991]

@@Bi_Nhan 😩😩😩