[CC]How I Made a 3D Printed 80 MPH RC boat mantaray [making story]

[@south_korea72]

우연히 보게된 영상인데 처음부터 끝까지 정속 시청하게 되었네요.. 설계부터 거의 모든 파트를 수작업으로 만드시고 제작하신게 정말 대단하십니다. 저도 하이드로나 3P보트를 좋아 하는 편인데 기성품 부품들을 사용하시면 제작과정이 조금 단순해지겠지만 선체 형상상 어쩔 수 없이 소소한 파트도 제작을 해야하니 생산성에 어려움이 많으셨던거 같네요. 하이드로외에 다른 종류들도 앞으로 기대됩니다. ^^ㅋ

[@D-factory]

저도 어려서 부터 V정 보다는 하이드로 타입을 좋아 하다보니 이지경 까지 이르렀네요.^^;;; 제작의 고충을 이해해 주셔서 고맙고 좋은 댓글 달아 주셔서 감사합니다.😀

[@robertread3046]

Hi my name is Robert Read i worked with Ron Jones and built unlimited like Circus Circus Atlas Van-lines Square Shop we hold 13 world records I’m saying this to show you just how impressed I am with your design can’t wait to see your boat designs scaled up and raced with the big boys🏴‍☠️🇺🇸👏👏👏

[@D-factory]

Thank you so much for your valuable comments. ^^😀

[@IRONCLADRC]

Absolutely love the design and mechanics that went into this build. I especially like the strut design with the set screws for adjustments light weight and practical. Looks ironclad to me!

[@D-factory]

Thank you for looking at the boat that I made. The strut fixing method I use is very strong. However, it has the inconvenience of having to set it up if you put the seam in between.😄

[@billclark5943]

Outstanding styling and forward thinking. Looks awesome. Appears very stable in the current trim and could probably take quite a bit more power

[@D-factory]

Thank you for liking it. That's good advice. I'd like to test the LMT motor.But it's too expensive.

[@김이성-w5f]

제작영상 너무 멋지네요 3p보트 디자인이 정말예쁘네요

[@D-factory]

좋게 봐주셔서 감사합니다.^^. 빠르게 달려 보려고 이렇게 저렇게 세팅중인데 ...현재 127km/h에서 발전이 없습니다.^^;;;

[@김이성-w5f]

@@D-factory 혹시 제작 의뢰될까요

[@D-factory]

현재 이 선체는 3d프린터로만 제작이 가능 하고.판매 할수 있는 FRP선체는 아직 없습니다.^^;;; kzbin.info/www/bejne/mGTCpoCmhLpno80si=6XQsY_XHjUIbRnS_ 대신 이 선체는 에폭시FRP제품이 2대가 있습니다.@@김이성-w5f

[@김이성-w5f]

@@D-factory 혹시 연락처 알수있을까요

[@D-factory]

***********입니다,@@김이성-w5f

[@jeremypikul7047]

Thank you

[@D-factory]

Thank you very much.

[@aquilesmasdmd]

Very impressive. Very.

[@D-factory]

Hello. Thank you for leaving a good comment.😁

[@tuanduong2373]

It's beautiful, it works so well, after I saw it, I fell in love with it, can I sell this passion again?

[@D-factory]

Thank you very much for the nice comments. I'm trying to sell it. I'm having a hard time because the hull design is not suitable for mass production. I'll try harder.

[@desnekke7073]

Beautiful model ❤❤ very nice 👍

[@D-factory]

Thank you for liking it.😊

[@desnekke7073]

@@D-factory you need a Dremel from Germany and not a big flex. You just can work more precisely. And maybe you can sell it 👍

[@D-factory]

@@desnekke7073 Thank you for your good advice. I'll hold it in.👍

[@eclipsetoys6551]

Very nice design

[@D-factory]

Thank you for liking it.^^

[@corbymodelboatclub]

Love the design, very futuristic.

[@D-factory]

Thank you for the compliment ^^

[@kaprc631]

You have created a piece of art! This is an awesome design. Congrats!

[@D-factory]

Thank you so much for your compliment.

[@Rc-Heizer]

A very good video - i like this futuristic shape -

[@D-factory]

Thank you for liking it.😁

[@RickChen]

You did a great job, the 150th Like is from Taiwan!

[@D-factory]

Thank you for liking it.

[@MrFadjule]

Fantastic design!

[@D-factory]

Thank you for liking it.😁

[@redwolfrc1.14]

Super cool boat bro 👊👍💯😎

[@D-factory]

Thank you so much for your compliment.😁

[@mikesrcgarage]

Awesome build! ✌🏼😎👍🏼

[@D-factory]

Thank you so much for your compliment.^^~

[@angelicgundam90]

This looks insane! Are you selling the STLs ?

[@D-factory]

Great idea. Let's get it ready, thank you.

[@thermalascension]

Excellent 👍

[@D-factory]

Thank you for the compliment ^^~

[@ericsorbara5386]

Great work

[@D-factory]

Thank you for liking it.^^

[@ВалерийЯкушин-ъ3й]

Неожиданная модель. Молодцы.

[@D-factory]

Спасибо за хороший комментарий.

[@robertheinrich2994]

this is impressive 🙂

[@D-factory]

Thank you liking it.😄

[@farzadfaradjizadeh3916]

Amazing!

[@D-factory]

Thank you for liking it

[@fonwoolridge]

Awesome!

[@D-factory]

Thank you so much for your compliment👍

[@vlademirbenevides9850]

Que belo trabalho ❗️ Meus parabéns ❗️🇧🇷

[@D-factory]

Obrigado pelas suas palavras amáveis.

[@iamkian]

Hello DJ Kim. What type of glue and activator did you use at 9:43? And... I love the RC-boot!

[@D-factory]

The adhesive used is a general purpose instantaneous adhesive with good penetration. The spray curing agent is from Loc & Loc

[@manu34667]

Beautiful build ! What kind of 3d printing filament did you use ? PLA ? ABS ? Thank you.

[@D-factory]

Thank you for liking it.😊 I used the PLA filament.

[@rcmodman403]

Amazing Design work ... Piece of art .. When your ready to sell any after your testing and changes let me know ...Thanks 🚤🎮

[@D-factory]

Thank you for liking it.😁

[@daiciuapostol79]

Amazing design and buid

[@D-factory]

Thank you so much for your valuable comments. ^^

[@daiciuapostol79]

@@D-factory Thank you sir for share this,to bad I don't understand the language. 6,35 mm flexshaft for that Power?

[@kaprc631]

Awesome design and speed. Great building video. Well done👍! Using the 3d printed hull as a mold and then build with carbon fiber would also be an option.

[@daiciuapostol79]

@@kaprc631 much lighter and more resistant, but probably quite difficult to make a mold of such a design

[@kaprc631]

@@daiciuapostol79 I agree! It would be very challenging to build this hull with cf!

[@RcBoat-TeamEBR]

너무 멋있습니다.~구매하고 싶을정도입니다

[@D-factory]

좋게 봐주셔서 감사합니다. 저도 제품화 하고 싶어 열심히 테스트 중 입니다.너무 디자인에 치중 하다보니 기능적으로나 생산성 면에서 어려움이 많이 있습니다.^^;;;

[@RcBoat-TeamEBR]

@@D-factory 성공하셔서 저도 주항 해보고 싶네요

[@D-factory]

응원해 주셔서 감사합니다^^

[@jimbrust486]

Is your plan to produce this boat? If so, just the hull, hull and drive line, or complete ready to run?

[@D-factory]

It's currently in the process of development. Various tests are under way with 3D printed hulls.😅

[@Mr.RC-Creator]

Amazing design. 👍

[@D-factory]

Thank you for your kind words.😄😄

[@ahmetakyasan3536]

which 3d program did you use to draw

[@D-factory]

I used a very old one.😅Do you know? mdt.

[@bitsurfer0101]

How did you model the boat and parts? It looks pretty authentic.

[@D-factory]

Thank you. It was designed after a long thought.

[@born_fpv]

오우 속도감 소리가 어마무시하네요. 저걸 수제작하시다니 장인이십니다!

[@D-factory]

3D 프린터의 힘을 빌렸으니 완전 수제작은 아니지요^^;;; 좋게 봐주셔서 정말 감사합니다.^^😃

[@D-factory]

kzbin.info/www/bejne/mGTCpoCmhLpno80 이보트가 8년전에 100%수제작 으로 만들었지요^^;;;

[@stevejackson3564]

I love the exotic design. What would it cost for me to get one sent to u.s.a. .

[@D-factory]

The boat in the video is currently being tested hard to become a commercial model. 3D printed hulls are heavy and not very strong. I will contact you when it is finished enough to sell.😄

[@pfll9755]

我很酷，这个 ebe 什么时候上市 Wǒ hěn kù, zhège ebe shénme shíhòu shàngshì

[@D-factory]

现在正在测试船身。 试验完成后，计划制作模具，以CFRP或GFRP为材质制作船体。

[@D-factory]

使用了翻译器。 明白了吗？

[@RDM3DLAB]

I want to print one for myself!! How do I get the 3D file?

[@송영주-c3m]

3D 프린터로 나오는 시간은 얼마나 걸리셨나요?

[@D-factory]

글쎄요. 정확히 기억은 안나는데...1m길이 선체 기준으로 30시간 내외였던거 같습니다.

[@tabaharif3606]

Hello sir, cool boat. Do you sell the hull?

[@D-factory]

The hull, currently built in 3d print, is built for testing. It is very heavy and weak in structure. When the test is completed, we are planning to process the mold and make it into a cfrp or gfrp product. I think it will be possible to sell by then.

[@tabaharif3606]

@@D-factory okay Sir 👍

[@minorich-]

3Dプリンターは何を使用してますか？

[@D-factory]

プリンターは私が直接製作したものを利用した。fdmデルタ方式で出力サイズ直径830mmに高さ1200mmまで出力可能だ。

[@minorich-]

@@D-factory ありがとうございました。

[@Rapha83br]

What filament was used in the boat?

[@D-factory]

It's a common pla filament.Filaments are heavy and have weak structural rigidity.

[@Rapha83br]

@@D-factory Ok, but why use the PLA filament in this project? Thanks for answering.

[@D-factory]

@@Rapha83br There is no particular reason. It is readily available around.I am well aware of the characteristics of FDM-style 3D printers that do not bond well between layers. However, I chose PLA because it has smaller shrinkage than other materials, so it can suppress deformation during printing.😁

[@ggkyy7186]

i need 3d design

[@D-factory]

Hi, friend. Thank you for liking my design product. But it is being tested hard by changing the setting to make it my business model. So 3D data is not available.

[@이승부-s1x]

😂

[@djaka6738]

📌📌📌

[@D-factory]

^^

[@mystic0824]

혹시 판매계획 없으실까요? 한대 구입해서 주항해 보고 싶습니다. ^-^

[@D-factory]

서둘러야 하는데.. 먹고 사는게 우선 인지라 늦어지고 있습니다.^^;;

[@mystic0824]

@@D-factory네^-^ 한대 만들게 되면 연락부탁드립니다. 모변등은 제가 준비해 보겠습니다.

[@황성원-g8w]

드론 주세용😀

[@D-factory]

현재 드론은 고장 수리중 입니다.ㅋㅋ

[@Djmeniz1]

stl?

[@D-factory]

Yes.

[@Djmeniz1]

@@D-factory i would like to build it

[@D-factory]

@@Djmeniz1 Hi, friend. Thank you for liking my design product. But it is being tested hard by changing the setting to make it my business model.

[@KK3DTechnology]

stl..?

[@D-factory]

Yes

[@KK3DTechnology]

@@D-factory sir can you send me...?

[@D-factory]

@@KK3DTechnology Hi, friend. Thank you for liking my design product. But it is being tested hard by changing the setting to make it my business model. So 3D data is not available.

[@KK3DTechnology]

@@D-factory no problem sir🙂👍🏻