Ceramic Coating Your Car At Home: PART 3 - COATING MAINTENANCE

Ceramic Coating Your Car At Home: Part 3 - COATING MAINTENANCE. In this three part series, I show you all the steps of how to easily apply a ceramic coating on your vehicle at home. I will guide you through the wash, decontamination, polishing, paint prep, application of the ceramic coating and show you how to perform proper maintenance once the vehicle is coated.
✅ Click here to buy on Amazon: amzn.to/3wzM8W2
Let’s clean, enhance and protect your car together!
►►SUBSCRIBE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Gyeon Bathe+: bit.ly/3TMYEJc
Gyeon Quick Detailer: bit.ly/3CVl8l5
Gyeon Wet Coat: bit.ly/3q5Qk9S
Gyeon Tire Express: amzn.to/3krJlnv
Other Gyeon products: bit.ly/3bYNhcy
🇨🇦 For people in Canada:
Gyeon Bathe+: bit.ly/31y1l74
Gyeon Quick Detailer: bit.ly/2PFNyFK
Gyeon Wet Coat: bit.ly/31ymspN
Gyeon Tire Express: bit.ly/2DQc1Wd
Other Gyeon products: bit.ly/31A8WC8
🇬🇧 For people in the UK:
Gyeon Bathe+: bit.ly/3TEx3d9
Gyeon Quick Detailer: bit.ly/3AHMmZL
Gyeon Wet Coat: bit.ly/3CN3u2Z
Gyeon Tire Express: bit.ly/3KDmOBL
Other Gyeon products: bit.ly/3q54jwp
►Other countries: gyeonquartz.com/network/
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
►Watch part 1 of this series: • Ceramic Coating Your C...
►Watch part 2 of this series: • Ceramic Coating Your C...
►Watch my review of all the Gyeon ceramic coatings: • NEW GYEON 2018 CERAMIC...
►Watch my wheel cleaning and protection tutorial: • HOW TO CLEAN, PROTECT ...
►Follow the Gyeon KZbin channel: bit.ly/3klexos
►For more details on products, visit the official Gyeon Quartz website: gyeonquartz.com
►Full disclosure: This is a sponsored video. However, I made sure that the opinions expressed in my video are my own and the company had no influence on my content.
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZbin, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
►►My merchandise store (T-Shirts, hoodies, sweatshirts, and more!): teespring.com/stores/pantheor...
►List of equipment I use to produce my KZbin videos: • BEST KZbin CAMERA & ...
►Follow Pan TheOrganizer:
Instagram: / pantheorganizer
Facebook: / pantheorganizer
Twitter: / pantheorganizer
🌐 Visit my official website: pantheorganizer.com
Intro music by Hurley Mower
/ hurleymower
#gyeon #ceramiccoating #detailing #cardetailing #cleaning #pantheorganizer #tutorial #carcareproducts #autodetailing #diy

[@PanTheOrganizer]

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: Gyeon Bathe+: bit.ly/3TMYEJc Gyeon Quick Detailer: bit.ly/3CVl8l5 Gyeon Wet Coat: bit.ly/3q5Qk9S Gyeon Tire Express: amzn.to/3krJlnv Other Gyeon products: bit.ly/3bYNhcy 🇨🇦 For people in Canada: Gyeon Bathe+: bit.ly/31y1l74 Gyeon Quick Detailer: bit.ly/2PFNyFK Gyeon Wet Coat: bit.ly/31ymspN Gyeon Tire Express: bit.ly/2DQc1Wd Other Gyeon products: bit.ly/31A8WC8 🇬🇧 For people in the UK: Gyeon Bathe+: bit.ly/3TEx3d9 Gyeon Quick Detailer: bit.ly/3AHMmZL Gyeon Wet Coat: bit.ly/3CN3u2Z Gyeon Tire Express: bit.ly/3KDmOBL Other Gyeon products: bit.ly/3q54jwp ►Other countries: gyeonquartz.com/network/ ►Watch part 1 of this series: kzbin.info/www/bejne/mqi8Y6BupbSafKc ►Watch part 2 of this series: kzbin.info/www/bejne/jJ-oYZVmo9icg7c

[@FABAutomotiveDetailing]

This was a great 3 part series! It’s also great to see all your sprayers facing the same direction in these videos. I’m OCD about sprayers facing the same way.

[@PanTheOrganizer]

Glad you noticed that! 👍🏻

[@FABAutomotiveDetailing]

Pan TheOrganizer First thing I noticed actually. 😂

[@rtfj5341]

Pan now you can do a full brand comparison, like next you can do car pro ot turtle wax, that would be awesome

[@loranseis300]

or meguiars :)

[@SovietBaltus]

I really liked this style. One could put everything in to one video, but in this way one can actually focus the steps and you have more time to actually explain what you are doing and how to do it. It all just makes it easier imo. Thanks again for very helpful videos :)

[@PanTheOrganizer]

Thanks Baltus! It’s nice to have feedback on new styles of videos that I come up with.

[@mattduffy2023]

This was awesome. Love to see older vehicles black paint from scrap yard to showroom !!!!!

[@santoarmano9053]

Thank you pan! I have been fallowing you for a few years now and you have helped me a great deal learning how to take care of our vehicles. I enjoy your videos so much and cannot thank you enough.

[@240sxdriver]

Pan I have to say this is by far the best format I've seen for a product showcase. Please do more!

[@PanTheOrganizer]

Cool! Thanks for the positive feedback Nick!

[@salsaadic]

Paaannnnn The Organizer!!!! Excellent series! You are literally my go to channel for detailing videos! I’ve spent tons of $$$ on equipment and product all based on your videos. I never used a polisher prior to discovering ur channel. U gave me the confidence to do this on my own. My wife thought I was crazy at first until she saw the end product of our cars... the gloss from the paint alone won her over. This is such a great hobby for me and it’s all thanks to u bro! Keep it tight and keep it clean!

[@PanTheOrganizer]

I am happy to read comments like this! Thank you!

[@nrnccrdn]

I'd love to see a series like this with a brand that we can easily get in Europe... Sonax for example.

[@404notfound.....]

Excellent 3 part series! Always fresh and interesting content. 🇨🇦 😎

[@PanTheOrganizer]

Thanks! I like having each video come as a surprise for you guys!

[@allancameron2023]

Hello Pan. I have watched many of your videos, some of them multiple times. I've learned so much about products and detailing from you and I wanted to thank you for your efforts. From one Canadian to another..... Thanks Pan !

[@PanTheOrganizer]

Ah thanks for the positive feedback Allan! What is your favourite video on my channel so far?

[@allancameron2023]

@@PanTheOrganizer The paint polishing tutorial for beginners really inspired me to buy a polisher and other products and it was the catalyst for me becoming interested in detailing. Thanks again Pan and all the best from B.C. !

[@waynecreedon272]

Hi Pan again you know how to make detailing fun and easy with great results thanks heaps. Even now my front load washing machine is very clean and hygienic thanks to you.

[@PanTheOrganizer]

Hehe thanks Wayne!

[@watchman6141]

Pan, you did an excellent job explaining how a DYI person can ceramic coat their car. It was also good that you broke the topic into three separate videos. There was a lot of information you covered.

[@PanTheOrganizer]

Thanks for the positive feedback!

[@ericdruet1885]

Amazing series if videos!! Do it again with different prize level products. Definitely a very enjoyable videos to watch, as always the best quality coming from Pan

[@PanTheOrganizer]

Thanks Eric!

[@eamonkelly2792]

Hi I love this style of video series it is pantastic, 😊😊, please do more of these and thanks again for all your tips and tricks on helping us to learn more about detailing 👍👍👍

[@PanTheOrganizer]

Thanks Eamon!

[@johnmuser3026]

I'm a big fan of the Gyeon products; especially the quick detailer and wet coat. Great video on how to maintain a ceramic coated car.

[@PanTheOrganizer]

Thanks John!

[@qa_hoang]

Thanks a lot for the helpful video! I'm getting ceramic coating applied on my new car soon so I've been doing research on how to maintain it. Your channel has been a great resource for me and many others I'm sure.

[@PanTheOrganizer]

Glad it was helpful! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 910,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@en3rgy187]

You're awesome Pan!

[@PanTheOrganizer]

Thanks!! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 920,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@Mike_Spina]

Great 3 part series!!!! Enjoyed this a lot!

[@PanTheOrganizer]

Glad to hear! Thanks Mike!

[@federicodanese]

From Italy : BRAVO 👏👏👏

[@PanTheOrganizer]

Gracie mille!

[@richardseem7948]

another great video again buddy. great idea 4 this mini series

[@PanTheOrganizer]

Glad you enjoyed it! Always nice to have your feedback. Have a great weekend.

[@hansbirkeland3350]

I have learned a lot with your videos 👍🏆 from Puerto Rico 🇵🇷

[@PanTheOrganizer]

Thanks Hans! Cheers from Canada 🍁!

[@amesbears]

Great Three part series

[@PanTheOrganizer]

I’m glad you enjoyed it!

[@davidleitch3199]

Pan, I miss seeing your detailing work in the sunshine. Just some after detailing video outside would be great. Great series.

[@PanTheOrganizer]

Hi David. I miss those too. However, I have recently moved into a brand new home, in a new construction/development area, so the roads are not yet asphalted. As I was one of the first homes delivered, there is still a long way to go before we have paved roads and no dirt/dust flying all over the place. So for now, I will continue to detail in my garage which was custom built specifically for this purpose. :)

[@jzvtec9]

great video pan..love and respect

[@PanTheOrganizer]

Thank you so much 😀

[@brasileiroadulto]

Pan, muito obrigado. Excelente vídeo. Pessoalmente, sou um fã dos produtos da Gyeon. Os meus produtos favoritos são o Q2M Bath plus e o Wet Coat. Até breve. Waston Ribeiro from Brazil

[@tafl-9198]

Gyeon make some great products. I love Bathe+ and Wet Coat 👍👍👍

[@franciscomendoza1168]

Excellent video series as always Pan!!! Keep'em coming... 👍🏼🤙🏼🖖🏼🤘🏼 I wish here in Mexico were more options like you have, it's hard to find quality products, and when you happen to find them, they're very expensive... :(

[@PanTheOrganizer]

Thanks Francisco! What’s your favourite video on my channel so far?

[@geovannyzuniga6037]

Love your videos Pan..learning alot from you ever time. Would like to see a DIY tutorial GYEON interior cleaning.

[@PanTheOrganizer]

Thanks Geovanny! How did you discover my channel by the way?

[@geovannyzuniga6037]

@@PanTheOrganizer I been looking at few details channels..and saw yours.. I like it how you explain everything..and I subscribed to your channel.

[@paulpaul864]

Pan, amazing job!👍

[@PanTheOrganizer]

Thanks Paul!

[@GoTMLGo1967]

Glad to see that you stick with one brand. Would like to see similar videos with other brands. For me I would say meguairs and turtle wax as these are probably the most popular ones you can get at Canadian tire or Walmart. Keep up the good work Pan!

[@PanTheOrganizer]

Thanks for the positive feedback!

[@GoTMLGo1967]

@@PanTheOrganizer if your up for the challenge I would suggest Chemicals guys 🤣

[@jahdel.j]

Awesomeness Pan!

[@PanTheOrganizer]

Thanks! 👍🏻

[@alexanderginis1488]

Great series I greatly enjoyed it A question though I have a car that was been neglected for a few years, there are spots of mold on the paint, can you recommend a plan of action? Maybe a quick video?

[@yaishmatheen4274]

Alexander Ginis they may actually be calcium deposits or limescale. U can use a waterspot remover but If that doesn’t work you can use a steam machine

[@VW.907]

Ooo jelly of the whole gyeon line.

[@PanTheOrganizer]

?

[@VW.907]

@@PanTheOrganizer line, gyeon line haha, sorry.

[@michaelcampanella9360]

First! Love your videos Pan !!!

[@PanTheOrganizer]

🥇

[@apdmc6008]

I found your videos a few months ago, I've watched plenty, and you're inspiring me to ceramic coat my new BMW M40i that I got in June. I live in the PNW so anything to help with the copious amounts of rain and commensurate grime is very appealing. Fortunately, the car is so new (picked it up in late June, and

[@howardbarton4279]

Hi Pan, I am a first timer with all this, and am a bit nervous about getting it wrong on my new car! Does the following look about right for my process - do steps W1 to W5 as wash stage (which would be my regular wash process adding step W6), then steps C1 to C7 to complete the one-off treatment. This obviously leaves the interior to do! Any advise before I start would be gratefully received. All products etc already bought. My car is a 5 year old black Mercedes E220 - the paintwork looks fine to my laymans' eye, but I have been told by Pros that it has some respray/repairs which are not up to standard. W1. Tyres & Wheels • Meguiar’s Hot Rims Wheel & Tire cleaner • Tyre Brush • MF Cloth • Clean • apply spray from 6”-8” • allow 15 sec to foam (use wheel brush if needed) • rinse with water • dry with MF Cloth W2. Pre-Wash • CarPro Multi-X • Pressure Washer • Foamer Fitting • Dilute 1:100 with water • Apply with Pressure washer • Do not allow to dry • Rinse W3. Snow Foam • Koch Chemicals: GSF • Pressure Washer • Foamer Fitting • Dilute 1:10 with water in foamer fitting • Attach to Pressure Washer • Spray over whole car • Rinse W4. Hand Wash • CarPro Resit • 1 x Bucket Warm Water • 1 x Bucket Water • 2 x Wash Mits • MF Cloths/Towels • Dilute 1:500 with water • Hand-wash (rinsing wash-mit in clean water between uses) • Rinse • Pat Dry W5. Ext. Windows • Stoner Clean & Repel Invisible Glass • MF Cloths • Spray a light coating • wipe dry with MF Cloth W6. Wax • Gyeon Wax • Orbital Polisher • MF Cloths • Apply product • Allow 30 mins to dry • Buff off C1. Paint Correction • 400 One 3D Cutting Compound • Chemical Guys: Polish Pad Conditioner • Orbital Polisher • MF Cloths • Orbital Polisher with Cutting Pad • 4-5 dots of Compound to pad • 1-3 sprays of Conditioner over dots of compound. • Apply to Panels in 2” square sections, in a lattice • Don’t allow to dry • MF Cloth wipe-off • Inspect with Torch • Repeat C2. Oil & Polish removal • CarPro Eraser • MF Cloths • Spray on • MF Cloth wipe-off C3. De-Contaminate • Q2M Clay Lube • Clay Bar • MF Cloths • Apply lube to Clay • Wipe clay over panel, with little to no downforce • Dry with MF Cloths C4. Final de-contaminate • CarPro IronX • Pressure Washer • MF Cloths & Towels • Spray on • Wait 3-5 mins (to turn purple-red colour) • Rub in with damp sponge • Rinse & Pat Dry C5. Polish • Meguiar’s Ultimate Polish • Chemical Guys: Polish Pad Conditioner • Orbital Polisher • Polishing Pad • MF Cloths • Orbital Polisher with polishing Pad • 4-5 dots of polish to pad • 1-3 sprays of Conditioner over dots of polish. • Apply to Panels in 2” square sections, in a lattice • Don’t allow to dry • MF Cloth wipe-off • Inspect with Torch • Repeat C6. Ceramic Coating • Armor Shield X • Applicator Block • Applicator Cloth • 4-5 drips onto cloth (which is over pad) • Apply to panel, in 2” square sections, in a lattice, overlapping, 2 x horizontal + 2 x vertical passes • Allow to go ‘iridescent’/oily rainbow finish • Polish off with MF Cloths C7. Wax • Gyeon Wax • Orbital Polisher • MF Cloths • Apply product with Foam Pad on Orbital Polisher • Allow 30 mins to dry • Buff off with MF Cloths

[@syphadeous]

Another great tutorial! Having watched every video, i am trying to see if you did one on using products on PPF and how to protect them. If not, video idea?? LOL! Stay awesome!

[@PanTheOrganizer]

Thanks! For PPF, you can use the same ceramic coatings as on paint. Or you can also apply PPF specific coatings like CarPro Skin ot Gyeon PPF.

[@syphadeous]

Thank you!

[@yaishmatheen4274]

@Dash Cam Huh?

[@michaelstewart3220]

Hello Pan. What about adding another coat of protection with the ceramic spray let's say month from original coating? Can I use a APC and Iron remover on an already coated vehicle to prep it for another coat of the ceramic spray?

[@jacobrudman_esq]

Hi Pan, I love your channel and the enthusiasm you bring to each video post. Would you recommend/not recommend spraying P&S Beadmaker after using Gyeon Wet Coat?

[@PanTheOrganizer]

Not in the same wash, as you run the risk of streaking and product overload. As you only need to use WetCoat once every other month, you can use Bead Maker on your weekly washes as a drying aid.

[@jacobrudman_esq]

@@PanTheOrganizer Thank you again!

[@barrybij8079]

excellent series...Gyeon makes great products..Can or would you use Wet coat as a drying aid on a coated car?

[@PanTheOrganizer]

Thanks Barry! Wet Coat isn't designed to be used as a drying aid, as you need to spray it on and rinse it immediately, one panel at a time.

[@lianyoukhanna6935]

Pan could you show us how to clean alcentara panels inside the car.

[@recent808]

Hey Pan, great video. Question for you, I noticed you used a garden type blower to demonstrate hydrophobic on the hood but also noticed a metro vac dryer hanging on the wall. Do you prefer one blower over the other? If so why?

[@PanTheOrganizer]

I prefer the cordless option as it’s more practical

[@andrewh9443]

Thanks for producing such great content! If your ceramic coating is constantly topped with with a silica spray sealant, when would you decide to strip everything and re-apply a new ceramic coating?

[@PanTheOrganizer]

I typically will apply a topper every 2-3 months. The coating underneath should be good until the end of its lifespan. So if the brand says 2 years, then at the 2 year mark, I do the entire process all over again. Unless I see a big degradation in the coating's performance before that.

[@andrewh9443]

Makes sense, thanks!

[@heshameladly]

Thanks Pan for another excellent video. The Gyeon products are great and I’ve been using Wetcoat for several months. I just completed graphene coating my car with GlassParency’s product (limited Pan edition!) followed by using the booster from GlassParency for an amazing finish. For maintenance coats, can I use a quality product like Gyeon’s WetCoat or should I keep the booster to the same brand as the ceramic coating?

[@PanTheOrganizer]

Yes you can use any ceramic oriented maintenance products that you wish. :)

[@croat4life100]

Hey pan, great video as always. A couple of questions, first being are you able to do a full paint correction outside on a non windy/sunny day as I don’t have access to a garage ? Also, would you ever be interested in trying some bowdens own products ? They’re an Australian based company and some products have unreal performance and the product names make you laugh. Thanks

[@rooboy99]

Just look for a compound that states that u can use in full sun ie one with plenty of lubrication that wont dry out too quickly

[@cyba888]

I have Gyeon can coat on my paint and I top it off with gyeon wax. Would maintenance be the same as in this video thank you

[@williamthomastaggart5080]

Pan, great video, not sure how I missed this one. Quick question, this is one I always ask, especially within my circle of professional retailers in my area that I consult with. I like to use Iron every year during my annual maintenance on a coated vehicle I did. I’m doing any damage to the coating, even though I am outing a top coat on? ”Asking for a friend,” lol.

[@PanTheOrganizer]

Hi William. Absolutely no problem to use iron removers on ceramic coated cars. It’s even recommended as part of a maintenance routine say every 4-5 months. And most iron removers, like CarPro IronX, are actually pH neutral.

[@louislou8233]

Hello Pan, how are you doing. I am seeking for your professional help: I’ve coated my PPF with Car Pro Skin about 4 months ago, there has no beading or sheeting when I wash the car. I thought there must be something wrong, maybe I did not have enough time let the product sit there before I leveled. I remember you said it is polishing that really remove ceramic coating on clear paint, but what is the steps if I want to re-coat my PPF, how to ensure good result. Thanks 🙏

[@felipepaz4306]

Hi Pan, great video again. quick question, I want to use CanCoat but I am using CarPro products, is there any compatibility issues If I use CanCoat and after do maintenance with Reload? Cheers

[@PanTheOrganizer]

No problem

[@bilcentersvergie716]

Hey! I love your videos and you get a lot of info I thank you for. I have a question regarding Gyeon Q² CanCoat and Gyeon Q² CanCoat PRO? here in Sweden we as private can not buy Gyeon Q² CanCoat PRO, and no one answers why can not buy as private? could you make a video of Gyeon Q² CanCoat PRO? appreciate all the help

[@GYEON_official]

Q² CanCoat Pro is available to GYEON Certified Detailer only - what's the difference with the non-Pro version? More concentration and durability. If you wish to learn more about GYEON Certified Detailer Program, have a look right here: www.gyeonservices.com

[@DaiPad881]

Hi Pan Really like your channel, I've just bought a BMW 1 series and i intend to put cancoat on it, When the coating gets to the point that it no longer works and i've decontaminated the paint would Gyeon primer alone be enough to prepare the surface again instead of using something with more cutting power? Many thanks from the UK

[@PanTheOrganizer]

It depends on the state of your paint. If it has only very light swirls or scratches yes.

[@geokon7192]

A lot of these brands aren’t available in Australia. Can you use mequires new ceramic spray wax at the end of a wash of a car that has a ceramic coating?

[@jesserodriguez9300]

Like the videos of the maintenance section. How about maintenance cleaning of ceramic coated windows?

[@PanTheOrganizer]

Nothing special for glass. Just use a quality automotive glass cleaner and you're done.

[@floridaactor]

I ordered the Gyeon wet coat, however, I have a question. I purchased my 2020 Honda CR-V two months ago and they put on a ceramic coating made by ECP. According to ECP they have a warranty for a number of years and state that all that is needed is to wash the car. I don't believe that the product will last all those years and feel that I need a booster. How good is the ECP paint protection?

[@thomasr7429]

Hello Pan 😀 bonne série de vidéos 👍 il n'y a pas de sous-titres disponible pour cette dernière vidéo ? Une version française de prévu ? Je sais que c'est du travail supplémentaire pour toi 😇

[@PanTheOrganizer]

Malheureusement non

[@thomasr7429]

@@PanTheOrganizer bonjour Pan. Ok, no problèmo 😉 Peux-tu faire en sorte que les sous-titres soient accessible pour cette dernière vidéo ? Bonne journée à toi.

[@MyGuyKirby]

Going back to last touch on maintenance of tires. Tire Express over the Tire coating, how often is that needed. I would expected the coating to last longer with only a Bathe cleaning for a month or two.

[@joannenaylor8781]

Pañ its craigger have a c7vette and it has drive ceramic coating and they say it's good for 7years but can I maintain it with mother's ceramic coating I don't believe you don't need to up keep finish true or not.Im close to opening my own detail business but covid hit I'm waiting for things to settle down to give it a try love you vids and any thing you could share I'm from Tecumseh ont next to Windsor Craig naylor

[@gege7785]

Pour un lavage d'appoint on peut aussi faire l'étape du pre lavage avec un shampoing de pre lavage neutre, comme le honeydew de chemical guys? Superbes vidéos Pan, on veut la même chose avec ta BMW!!!

[@PanTheOrganizer]

Oui tu peux

[@mann3151]

So continued with my question in previous episode, if there are spots from rain drops, is it possible to think of a waterless wash instead of full wash in case I don't have a space to do a full wash. Thanks Pan!

[@yaishmatheen4274]

Betterman's Reel You can use the water spot remover to Remove the tougher deposits

[@davidhughes4150]

Hi pan great video After 6 months can you just reply another ceramic coat or would you have to go through the whole process again

[@PanTheOrganizer]

No. Just wash, iron remover, IPA and apply a fresh coat.

[@davidhughes4150]

@@PanTheOrganizer good to no thanks

[@Brian-fo8sh]

Pan, I have yet another question for you. I’ve recently started investing in Gyeon products and what I’ve used so far…I love them. I ordered Wet Coat and here is my question. Can a small section of a panel be sprayed with Wet Coat and distributed with a microfiber wash mitt for more of an equal distribution and then rinsed thoroughly? I’m having a very difficult time wrapping my head around a product that I just spray/mist on and rinse off. It just seems to me that the distribution would not be as even as it would if you apply a small amount with a mitt and then rinse. Thoughts? Thanks again.

[@PanTheOrganizer]

Spray and rinse products get distributed evenly when you rinse with your pressure washer. You’ll see this easily as you will have equal water beading on the entire panel. I know it sounds weird but you’ll understand when you apply it. And one thing is for sure: don’t overapply this.

[@Brian-fo8sh]

@@PanTheOrganizer thanks so much Pan. I’m looking forward to using it and I’ll do my best to lightly spray/mist the product and thoroughly rinse afterwards.

[@mikejones514]

Can you do one of these but with Adams products 🙏🏽

[@kattyRocks23]

great video!! quick question, how often do i have to do the coating maintenance ? thanks :)

[@PanTheOrganizer]

At least once every 2-3 months is good to replenish the protection. Other than that, you can wash the car as often as you want.

[@kattyRocks23]

@@PanTheOrganizer Merci Pan!! C'est très apprecié!

[@btcullen5876]

Pan: I have water spots on my F-150. Will these products remove the water spots or do I have to buy another product to remove them? Great Videos, thank you!!

[@PanTheOrganizer]

Hi! First, what kind of protection is on your paint? Do you have a ceramic coating? If you have zero protection (not a good idea) or you have a ceramic coating (best paint protection available), there are water spot removers that you can use. You wash your vehicle first, dry it, and then use the water spot remover. You spray it on a microfiber towel, wipe on the surface, and then immediately buff off with a second clean and dry microfiber towel. Once you are done with the process, wash your car once more, to neutralize any leftover residue from the water spot remover. Here's an excellent few product selections: bit.ly/3MUyMJN bit.ly/43Hx6Jt Now that's assuming the water spots haven't been left unattended for too long, baking in the hot sun, and potentially etching through the clear coat. At that point, you might need machine polishing steps, or water sanding, or if it completely destroyed the clear coat, a respray.

[@Rcontr03]

Hi Pan, wondering where does the Q2M Cure product fit in the lineup? it would seem as though the Bathe+ and WetCoat combo it's all you need.

[@PanTheOrganizer]

Cure is just a different type of application. You use either Cure or Wet Coat, not both.

[@themetafury]

Hi Pan. Could you provide a link to your pressure washer wand please.

[@PanTheOrganizer]

Here you go: Kranzle 1122TST pressure washer: bit.ly/3d5kZeK Kranzle 1122TST plus upgraded Mosmatic gun and wand: bit.ly/2WoDHHI Mosmatic gun and wand solution: bit.ly/3faTEJQ

[@themetafury]

@@PanTheOrganizer thanks Pan!! You're the best!!

[@Chunkychocolatemilk7]

Should I use all of these products if I wash my car every week? Or just bathe, and all the other toppers every like 2 months. Thanks!

[@billsawyer5265]

PAN... please... how about this topic. I have a coated car and a coated Matte bike. What detail sprays can I use for dust, bugs etc? Thanks

[@PanTheOrganizer]

You're in luck Bill! I just released a new matte paint care video here: kzbin.info/www/bejne/a4PSlIauf7agsKs

[@coltonbalasa]

Can I use bead maker as a drying aid over evo mohs coating? Also, does have a topper lik carpro reload to use like every few months to maintain the coating?

[@PanTheOrganizer]

Yes to both questions. Every 2-3 months you can use which ever ceramic or graphene topper of your choice, including Gyeon Cure.

[@Calonv]

Hi Pan! As maintenance, can you use some wax like the Gyeon Q2 Wax? (The one that comes like in a stick)

[@PanTheOrganizer]

Yes, or Gyeon WetCoat or Gyeon Bathe+ (the shampoo infused with SiO2). I have a review of the Q2 Wax here: kzbin.info/www/bejne/qpXQkJlml7Jgmsksi=Kv6xxFNpPLY99CcU And of WetCoat here: kzbin.info/www/bejne/Z4ibi5mvqrKGmbssi=sEDW_0GpzieJsVNq

[@Calonv]

@@PanTheOrganizer great, thanks! I've already seen those videos 🤭🫣 big fan of your job here!

[@feeldafury]

Pan, for maintenance wash. You don't have to do the foam spray to help lift the dirt?

[@PanTheOrganizer]

There are many ways to wash a car. So if the snow foam is part of your pre-wash then yes you would foam the vehicle.

[@radostindimitrov241]

Hello, Pan, can i use carpro Reset for washing my carpro uk3.0 ceramic coated cat and enhance my ceramic ? Or this soap has e diffrent purpose ?

[@PanTheOrganizer]

Reset is a pure shampoo like Gyeon Bathe. They are simply made to do a good job of washing your car. For further enhancing your coating, watch Part 3 of this series where I talk about maintenance options. ;)

[@rossmeistergeneral9614]

Hey Pan, what other brands would you pick for a job like this if you could ONLY choose that one brand for all these types of products? I would guess CarPro personally.

[@PanTheOrganizer]

CarPro or Gyeon yes. Very solid and complete lineups and quality products.

[@rnavin20]

Pan I'm getting an ceramic coating from IGL. Would like to know if I could use TW seal and shine as a maintenance coating on the ceramic coating. Thanks

[@PanTheOrganizer]

Seal N Shine is best used as a base layer of protection. I would recommend you look into the silica spray sealant from IGL that they recommend for their coatings.

[@rnavin20]

@@PanTheOrganizer Thanks a bunch Pan.

[@cplcouture]

J'ai commandé un ensemble Flyby Forte pour mes fenêtres. Est-ce que je dois faire un entretien comme celui-ci pour les fenêtres (après combien de temps)? Le reste de mon véhicule vient d'être traité avec le scellant Turtle Wax Ice Sean & Shine. J'ai aussi commandé la cire à vaporisé pour ajouter sur le scellant. Un savon en particulier que tu recommandes pour les entretiens hebdomadaires?

[@PanTheOrganizer]

Tu n'auras rien à faire pour les fenêtres. Pour le savon de lavages d'appoint, n'importe quel savon pour voiture à pH neutre fera.

[@cplcouture]

Pan TheOrganizer J’ai reçu des pads pour verre Lake Country au lieu de Carpro... même qualité?!

[@covertrun2326]

Hey Pan... I watched with interest your series on ceramic coating, particularly the Gyeon Wet Coat for a spray on spray off finisher. I use traditional carnauba products, sealers and wax. Is there any problem using Wet Coat on top of carnauba, as it seems to fit perfectly (as designed) with the other ceramic and silica products? Carzilla says it's OK to use on any surface, but feel better asking for your opinion. I'm interested to know if you think it's wise to use a products strictly by product line (content, carnaubas, silicas, and ceramics,) or do you think it's OK to mix and match. With so many great products and mfgrs out there, it seems it would be counter productive to use one manufacturer thru their entire line only. I watch most of your videos, but still a relative newby and learning as we go. My wife wants to know if we need to move to get a bigger garage with indoor drainage capabilities. I've graduated from a dish soap wash with hose, to pump spray foamers, and now a two bucket set up with grit guards and hose fed spray foamer. (any yes, lost the dish soap a while ago). She's asking me how much I should spend on a pressure washer now. I have a '13 Lexus RX 350 and a 911, 933 (1995), both treated with loving care.

[@PanTheOrganizer]

Do NOT use ceramic based products on top of existing waxes or sealants. They won't bond. Hence why we make sure to do proper paint prep before applying any ceramic based product, as it has to bond directly to virgin clear coat.

[@covertrun2326]

Thank you Pan! I was heading down a path of certain destruction.

[@cjchico]

So I have a traditional wax on my truck. Can I use the turtle wax seal and shine then their ceramic spray overtop of the wax? Or do I need to do a strip wash then that?

[@PanTheOrganizer]

Seal N Shine yes. Not the Ceramic Spray Coating. Don’t mix ceramic based products with regular waxes.

[@andrewmackenlv4229]

Hi Pan, when to do and maintenance wash

[@PanTheOrganizer]

Once every two or three months, using a silica spray sealant as topper.

[@HYPERsonic007]

Can I use gyeon wet coat on top of my adams advance graphene coating base? Like right after a maintenance wash?

[@PanTheOrganizer]

Yes, absolutely.

[@nathanaelayala766]

Hello Pan! What brand is that car dryer you used on this video? And also, when do you do the mantainance wash? Weekly? Every other day? Please advise me :)

[@PanTheOrganizer]

That's my EGO blower, which I reviewed in this video: kzbin.info/www/bejne/r3m3YqevaKh4epo Here's a link to the blower on Amazon: amzn.to/3rgV6An I recommend a regular wash as often as you can, I do my car twice weekly. And a maintenance wash with a silica spray sealant at the end at least once every 2-3 months.

[@nathanaelayala766]

@@PanTheOrganizer thank you so much Pan. Im new in all of this detailing stuff and your videos are way amazing!! Al ready did my first car and it went good thanks to you!!

[@VIDEOHEREBOB]

Pan, during the maintenance wash, you wouldn't do a foam wash with your foam canon? Please let me know why that step was omitted. Thank you.

[@PanTheOrganizer]

You can. But here we were focusing on options to add a bit of protection.

[@dsvillalva]

I have cquartz finest reserve on my car for 2 years now. Can I use these maintenance products or should I stick to CarPro products?

[@PanTheOrganizer]

You are free to use which ever maintenance products you wish, including Gyeon. ;)

[@joannenaylor8781]

Pañ I'm using my wife's phone I have a drive product of ceramic coating they say it's good for seven years do you recommend a follow up with cmf after each wash or not craigger

[@PanTheOrganizer]

What is a CMF?

[@joannenaylor8781]

It's cmx cgnaylor sorry

[@Brivmurnieks]

So if I add all kinds of protection with months of protection on top of cancoat, does it all add up that time to those original 6 months of protection?

[@PanTheOrganizer]

The protection underneath won't last beyond its original durability. The fact you are adding toppers on top of protection just ensures you reach the maximum durability and get maximum performance during its lifespan. By the way, Gyeon have since updated the formula to the new EVO version, and it now lasts up to 12 months. Links in the description.

[@Nigga6996]

Bonjour Mr. Pan, is it too much to have Gyeon Bathe+, Glass+, Ceramic detailer and Wet coat as maintenance products? Or should it be enough with just a few of the products?

[@PanTheOrganizer]

It's definitely too much. You don't want to be applying too many different toppers. Pick one, and stick to it. Stacking different products can lead to streaking or product overload.

[@Nigga6996]

@@PanTheOrganizer Just one? Really? i was ready to buy them all. Hehe.. I am thinking about applying Gyeon View and Synchro Evo on my car. Would then Gyeon Bathe+ and Glass+ be enough for maintenance?

[@Matthew3753]

Hi Pan ! I have a question. I have Gyeon wet-coat on my wheels, and each time I use brake-buster to clean my wheels and power wash all the dirt I feel like i’m stripping the coding because it loses the beating and sheeting.

[@PanTheOrganizer]

What is your question? I don’t see a question.

[@Matthew3753]

@@PanTheOrganizer my question is, can you strip off the wet-coat from using Break Buster for future weekly maintenance washes ?

[@robertbrownell3918]

Are you liking these products better than the optimum brand? I started using ONR based on your videos - do I need to dump the ONR?

[@PanTheOrganizer]

There are many great brands out there. That’s the beauty for us consumers. More competition amongst brands leads to better products. Optimum products are still excellent.

[@tomislavognenovski6804]

Hi Pan, can we use bathe+ every single wash or we need to use it from time to time to boost ceramic properties? Washing my car once a week is a MUST for me and somethimes i do that twice a week. Should i use bathe+ for contact wash every single time or should i use regular bathe?

[@PanTheOrganizer]

I wouldn't use Bathe+ for every wash as you could potentially run in product buildup or streaking. Once a month should be more than plenty. Then use the regular Bathe for your weekly washes.

[@tomislavognenovski6804]

@@PanTheOrganizer Thanks for the fast answer !! I have another question related to this. I want to polish my car and apply can coat this weekend. Instead of using bathe+ afterwards can i contact wash with regular bathe and use wet coat for maintenance and how often should i use wet coat. As i mention i wash my car regulary and its daily driven car.

[@RayRay-em4vp]

Hi Pan, I have a weird question. If it's raining fairly hard outside and I spray Gyeon Wet Coat on my clean car while it's raining, would the rain "rinsing" it off my car be the same as rinsing it with a hose? What about driving the car around the block after spraying it to let the rain rinse it? I live in a townhouse community and car wash hours are strict and when it rains, it tends to rain during late evening and early morning when car washing is not allowed. However, I CAN spray the car down with rinseless washes, spray on/wipe off products within my parking stall. I just can't use the water hose

[@PanTheOrganizer]

Don't do that. Rain isn't as strong a jet as a garden hose or pressure washer. You only need to apply WetCoat once every 2 or 3 months. So wait for appropriate conditions.

[@RayRay-em4vp]

@@PanTheOrganizer I understand.. Aloha Pan!

[@dirtyflow1825]

Pan if you only wash your one car as a DIY person how long do these bottles stay good on a shelf?

[@PanTheOrganizer]

1-2 years is the typical shelf life of auto detailing products as long as they are kept in stable, non freezing conditions.

[@gregorytimmermans6984]

Thank you for all these great videos. Eventually, which option is the best for an usual maintenance wash of a ceramic coated vehicle : Reset from CarPro (strong cleaning power but without SiO2) or an SiO2 infused shampoo like Gyeon Bathe+ ? In this video you use the Bathe+, but in more recent videos with your wonderful 911 Turbo S, you use Carpro Reset everytime.

[@PanTheOrganizer]

I tend to prefer shampoos that are pure (no protection in them) as I prefer to add my own topper of choice at the end of the wash process. Shampoos with infused protection are for those who want to save on time and not use multiple products for maintenance of their coated cars. If that's your car, then pick shampoos like Bathe+. If you can apply your own protection, use a pure shampoo like CarPro Reset or the new Gyeon Restart Wash (a shampoo with iron removing capabilities), and then use Gyeon Cure or Gyeon Wax on your ceramic coating at the end of the wash process.

[@gregorytimmermans6984]

@@PanTheOrganizer Ok thank you. Is it equivalent if I use CarPro Reset for washing, then Gyeon Wet Coat before drying, then Gyeon Ceramic Detailer on the whole car after drying ? (that's actually what I'm usually doing). I suppose that Wet Coat + Ceramic Detailer are sufficient together but I'm maybe wrong.

[@leonardyhuang5085]

Awesome video, Pan! I have the same question: is the wet coat an alternative to ceramic detailer or ceramic detailer can be topped up after the wet coat?

[@leonardyhuang5085]

Awesome video, Pan! I have the same question: is the wet coat an alternative to ceramic detailer or ceramic detailer can be topped up after the wet coat?

[@leonardyhuang5085]

Awesome video, Pan! I have the same question: is the wet coat an alternative to ceramic detailer or ceramic detailer can be topped up after the wet coat?

[@Vini-Pizza]

Pan, with most ceramic coatings, you need to discard any applicators and microfiber towels after the coating process. With the Can Coat ceramic Coating does the same apply here?

[@PanTheOrganizer]

Yes

[@Vini-Pizza]

@@PanTheOrganizer thanks again 👍👍

[@losmoore3358]

I'm not having luck finding your part 1 and 2. If I finish using 3D AIO, do I wet the car again to apply the wet coat then spray water on it again for the sealant coverage ? Then dry it again ?

[@PanTheOrganizer]

Part 1: kzbin.info/www/bejne/mqi8Y6BupbSafKc Part 2: kzbin.info/www/bejne/jJ-oYZVmo9icg7c

[@ronaldgoerdemann3837]

Thanks for this video, I Only misses the windows.

[@svnuno]

Can you do a video for someone that washes cars in a desert environment ?

[@flowinthrou]

Does wet coat stand on other coats? Or should be applied on bare panel as they say?

[@PanTheOrganizer]

It can absolutely be used as a maintenance topper on an existing ceramic coating. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 990,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@halamadrid6733]

Could you also use a wash and wax as a maintenance wash

[@PanTheOrganizer]

No. Don't use waxes or wax infused products on ceramic coated cars. Use appropriate shampoos (ph Neutral wax-free) like Gyeon Bathe, CarPro Reset.

[@amesbears]

How does this company to Turtle wax seal & shine new formula. They are the same lasting time. This is what I used on my car. It looks great plus topped with bead maker.

[@PanTheOrganizer]

There are many great products and brands. This series simply highlighted one of them and also answered my viewers who wanted to see if it was possible to do a coating application from A to Z using a single brand’s products.

[@danieljackson9]

Pan what's your opinion of avlon king ceramic coating ?

[@PanTheOrganizer]

I have been testing it and it’s hands down one of the easiest coating applications I have ever done! Expect a full review and tutorial in October. I never reveal future content but that video will be absolutely crazy. 👍🏻

[@danieljackson9]

I'm so glade you managed to test it cant wait for the video