Ceramic Coating Your Car At Home: PART 2 - DECON, PREP & COATING

Ceramic Coating Your Car At Home: Part 2 - DECON, PREP & COATING. In this three part series, I show you all the steps of how to easily apply a ceramic coating on your vehicle at home. I will guide you through the wash, decontamination, polishing, paint prep, application of the ceramic coating and show you how to perform proper maintenance once the vehicle is coated.
✅ Click here to buy on Amazon: amzn.to/3wzM8W2
Let’s clean, enhance and protect your car together!
►►SUBSCRIBE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Gyeon Iron: bit.ly/3RrFKW8
Gyeon Tar: bit.ly/3cDHflk
Gyeon Clay Lube: amzn.to/3fDB6kJ
Gyeon Clay: amzn.to/31BhUyS
Gyeon Silk Dryer: bit.ly/3AGwkiM
Gyeon Primer: amzn.to/2F6iGfQ
Gyeon polishing pad: bit.ly/33I9xV6
Gyeon finishing pad: bit.ly/2XInRZO
Gyeon Prep: bit.ly/3RsYcxF
Gyeon Polish Wipe: bit.ly/3gK27UP
Gyeon Can Coat: bit.ly/3B7cCOw
Gyeon Prism Mini: bit.ly/31C3IFZ
Gyeon microfiber applicators: bit.ly/33EnbZe
Gyeon Baldwipe: bit.ly/3q2SSp1
Gyeon Softwipe: bit.ly/3kuGM3Q
Gyeon Glass: bit.ly/3KH6wHN
Gyeon Tire dressing: bit.ly/3KFUi2c
Other Gyeon products: bit.ly/3bYNhcy
🇨🇦 For people in Canada:
Gyeon Iron: bit.ly/3adxch9
Gyeon Tar: bit.ly/30COscC
Gyeon Clay Lube: bit.ly/33GTI0T
Gyeon Clay Mild: bit.ly/2XYYmUn
Gyeon Clay Coarse: bit.ly/2PEutnG
Gyeon Silk Dryer: bit.ly/33EmK12
Gyeon Primer: bit.ly/3ioa1Uq
Gyeon polishing pad: bit.ly/33I9xV6
Gyeon finishing pad: bit.ly/2XInRZO
Gyeon Prep: bit.ly/3abjsmZ
Gyeon Polish Wipe: bit.ly/3gK27UP
Gyeon Can Coat: bit.ly/2Pzgwas
Gyeon Prism Mini: bit.ly/31C3IFZ
Gyeon microfiber applicators: bit.ly/33EnbZe
Gyeon Baldwipe: bit.ly/31Dlicu
Gyeon Softwipe: bit.ly/3kuGM3Q
Gyeon Glass: bit.ly/3itnQRz
Gyeon Tire dressing: bit.ly/3ioq2JM
Other Gyeon products: bit.ly/31A8WC8
🇬🇧 For people in the UK: bit.ly/3q54jwp
►Other countries: gyeonquartz.com/network/
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
►►Watch Part 3 of this series by clicking here: • Ceramic Coating Your C...
►Watch my review of all the Gyeon ceramic coatings: • NEW GYEON 2018 CERAMIC...
►Watch my wheel cleaning and protection tutorial: • HOW TO CLEAN, PROTECT ...
►Follow the Gyeon KZbin channel: bit.ly/3klexos
►For more details on products, visit the official Gyeon Quartz website: gyeonquartz.com
►Full disclosure: This is a sponsored video. However, I made sure that the opinions expressed in my video are my own and the company had no influence on my content.
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZbin, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
►►My merchandise store (T-Shirts, hoodies, sweatshirts, and more!): teespring.com/stores/pantheor...
►List of equipment I use to produce my KZbin videos: • BEST KZbin CAMERA & ...
►Follow Pan TheOrganizer:
Instagram: / pantheorganizer
Facebook: / pantheorganizer
Twitter: / pantheorganizer
🌐 Visit my official website: pantheorganizer.com
Intro music by Hurley Mower
/ hurleymower
#gyeon #ceramiccoating #detailing #cardetailing #cleaning #pantheorganizer #tutorial #carcareproducts #autodetailing #diy

[@PanTheOrganizer]

⬇🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇⬇ 🇺🇸 For people in USA: Gyeon Iron: bit.ly/3RrFKW8 Gyeon Tar: bit.ly/3cDHflk Gyeon Clay Lube: amzn.to/3fDB6kJ Gyeon Clay: amzn.to/31BhUyS Gyeon Silk Dryer: bit.ly/3AGwkiM Gyeon Primer: amzn.to/2F6iGfQ Gyeon polishing pad: bit.ly/33I9xV6 Gyeon finishing pad: bit.ly/2XInRZO Gyeon Prep: bit.ly/3RsYcxF Gyeon Polish Wipe: bit.ly/3gK27UP Gyeon Can Coat: bit.ly/3B7cCOw Gyeon Prism Mini: bit.ly/31C3IFZ Gyeon microfiber applicators: bit.ly/33EnbZe Gyeon Baldwipe: bit.ly/3q2SSp1 Gyeon Softwipe: bit.ly/3kuGM3Q Gyeon Glass: bit.ly/3KH6wHN Gyeon Tire dressing: bit.ly/3KFUi2c Other Gyeon products: bit.ly/3bYNhcy 🇨🇦 For people in Canada: Gyeon Iron: bit.ly/3adxch9 Gyeon Tar: bit.ly/30COscC Gyeon Clay Lube: bit.ly/33GTI0T Gyeon Clay Mild: bit.ly/2XYYmUn Gyeon Clay Coarse: bit.ly/2PEutnG Gyeon Silk Dryer: bit.ly/33EmK12 Gyeon Primer: bit.ly/3ioa1Uq Gyeon polishing pad: bit.ly/33I9xV6 Gyeon finishing pad: bit.ly/2XInRZO Gyeon Prep: bit.ly/3abjsmZ Gyeon Polish Wipe: bit.ly/3gK27UP Gyeon Can Coat: bit.ly/2Pzgwas Gyeon Prism Mini: bit.ly/31C3IFZ Gyeon microfiber applicators: bit.ly/33EnbZe Gyeon Baldwipe: bit.ly/31Dlicu Gyeon Softwipe: bit.ly/3kuGM3Q Gyeon Glass: bit.ly/3itnQRz Gyeon Tire dressing: bit.ly/3ioq2JM Other Gyeon products: bit.ly/31A8WC8 🇬🇧 For people in the UK: bit.ly/3q54jwp ►Other countries: gyeonquartz.com/network/ ►►Watch Part 3 of this series by clicking here: kzbin.info/www/bejne/hHWteGRtnN-qnq8

[@Bull1the1Great]

What a time to be alive ! It keeps getting easier to get decent results for us the weekend warriors

[@PanTheOrganizer]

Totally!

[@JackOfHearts42]

I got Gyeon CanCoat on my car, and I love it. Easy to put on, has great gloss, and superb protection properties! I did it all outdoors in less than ideal conditions, and still worked. I will do another coat before winter.

[@PanTheOrganizer]

Thanks for sharing!

[@williamthomastaggart5080]

Excellent video series Pan. Enjoy your weekend.

[@PanTheOrganizer]

Thanks! Enjoy your weekend too!

[@YK-Youtube]

Thank you always for answering questions and providing helpful information!!

[@PanTheOrganizer]

My pleasure! 😁👍🏻 And thanks for helping to support my channel. I appreciate it.

[@richardseem7948]

great video and tutorial video again pan. awesome product line.

[@PanTheOrganizer]

Thanks Richard!

[@xaviermatos5012]

Thanks Pan for all the info, tips and tricks! You have inspire me to even try to get the certification for detailing! 🙏🏻💪🏻 wish me luck! 🙌🏻

[@worlow1841]

good luck brother

[@PanTheOrganizer]

Hi Xavier! It’s cool that I can inspire my viewers!

[@xaviermatos5012]

Pan TheOrganizer indeed! 🙌🏻

[@xianreiss]

Did not know there is a certification for detailing.

[@jbss59111]

Voilà une superbe vidéo, j’ai une Lamborghini à faire la semaine prochaine donc je vais vite commander. Merci Pan , j’espère que le résultat va être au rendez-vous 🤩

[@Jonasvanbogaert]

Well Gyeon, if you read this, i’m happy to receive a full starter pack. I’m broke of have to buy all these products ... 😉

[@nasdoc1]

That's a lot of work. Car detailing is hard work. Your videos are so good. You give all the information that a common man requires.

[@PanTheOrganizer]

Thanks for the positive feedback! I appreciate it. What’s your favourite video on my channel so far?

[@nasdoc1]

@@PanTheOrganizer It's difficult to pick one. I like em all. I really like them all. There's always something to learn. You keep repeating some stuff, mostly prepping a car, in each video which is super helpful. It's like a revision and I always pick up small details that I might have missed. It's the very very small things like how you hold your towel or how you flip it over etc that makes things easier. Or how much pressure to apply. I don't know why but it's gone in my head that the more pressure you apply, better the results. So I gas out pretty soon. Lol! Great content. You have to open your own academy. You'll be a great teacher.

[@fernandoarno52]

CanCoat is fantastics product! I used with triple layer application, it's incredible! Brightness and durability, 11 months! You're a leader, Pan, your chanell and your jobs are fantastics!

[@PanTheOrganizer]

Thanks for the kind words Fernando! What car do you drive?

[@fernandoarno52]

​@@PanTheOrganizer Opel Astra K TDCI metallic silver gray. I no have garage and CC made its the great work!

[@aleskalan1891]

@@fernandoarno52 11 months and non-garaged? That’s nice! How do you like CC now, after another year?

[@dannydaugherty5702]

Wow 😯 mind blown 🤯 great job my friend. I keep finding these jewels 💎 of videos to watch.

[@PanTheOrganizer]

Glad you enjoyed!

[@dannydaugherty5702]

@@PanTheOrganizer It’s becoming my favorite past time ☝️😂

[@Dragg0]

Awsome video. Great tutorial. Thnks

[@PanTheOrganizer]

Thanks Noel!

[@laxbeach2381]

I think it’ll be cool to have a video to go over various defects, and compare a cleaner wax, vs All in one, one step, compound, and polish, etc.

[@Scwdetail]

Thanks again Pan. Gyeon makes awesome products. Need to try this out as usual. After your Saturday am video there is usually an amazon order immediately afterward- lol - i have the gyeon leather coat and it is amazing. You the best Pan

[@PanTheOrganizer]

Hehe thanks Chefkyle! It’s always a great feeling receiving an order, unboxing it and going straight to testing new products!

[@manrex5238]

You u are my hero man,the best detailing channel on KZbin thanks so much

[@PanTheOrganizer]

Thanks! How did you discover my channel?

[@manrex5238]

Pan TheOrganizer looking on KZbin for Do it yourself auto detail and theta are many good channels air there sino of them with multimillion companies behind but so far you are the most “detailed” explanation yet simple.

[@COC785]

I applied this today on a white convertible mustang. I think I may have used more than needed as I had about half the can left after the 2nd coat. 50ml per coat. It was hard to see where it was going on white paint so I used a little more. I used my own applicator and used the included towel to wipe off. Wipe on wipe off. Easy application. Nice gloss. Paint felt slick on the 2nd coat.

[@akshatbhardwaj2179]

As always, amazing video Pan! Next, make a video on ceramic coating the interior plastic trims please.

[@PanTheOrganizer]

Thanks Akshat!

[@leonardomontecalvo7046]

Thanks for this 3 part video series Pan! Are there any steps for the prep that would be different for PPF protected surfaces? Thanks!

[@FABAutomotiveDetailing]

Looks like Gyeon has some awesome products. I hope to try more soon and that can coat looks stupid simple to use. Great video brother!

[@PanTheOrganizer]

Thanks bro! Wish April a happy birthday from me!

[@jayz313]

Brian, I know right, easy great gloss, and great protection. You and I have full size crew cab pick ups, I killed myself prepping and putting on 3 coats (what GTechniq calls for) of GTechniq CSL and EXOV4. Heck doing the roof alone, is like doing a whole Mini Copper. Don't forget 20" wheels, and all that glass. Next time I get get a truck or any vehicle (I love the results of Can Coat) I'm going Gyeon Can Coat, and given it's ease I would actually welcome applying it a couple of times a year, because I enjoy doing that kind of stuff.

[@FABAutomotiveDetailing]

Jay Zstr I agree cleaning our trucks is very tiring. This can coat looks awesome for that.

[@billmccann217]

What about removal if we want to try a different product after Can Coat starts to fail. Would it need to be polished to remove any remnants of the coating?

[@danmorrissette4814]

GYEON Great line of Products.... !

[@kareemroberts3698]

Looks like I will be using gyeon as well..... keep up the awesome work bro

[@PanTheOrganizer]

Thanks Kareem!

[@adyg8221]

Just applied this today to my focus rs mk2 came out great. Full wash and decon and prep is the key I think as with any coating. Love the channel Pan .

[@PanTheOrganizer]

Great to hear! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 920,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@adyg8221]

@@PanTheOrganizer been a follower for a long time now pan live your work mate

[@PanTheOrganizer]

Oh cool! What country are you watching from? Cheers from Canada!

[@adyg8221]

@@PanTheOrganizer Australia Pan.

[@jayz313]

Great idea for a series, I really enjoyed it. Gyeon Can Coat certainly does not get enough exposure it's a great product. I hope to see you incorporating it in more of your videos, I recently applied GTechniq CSL and EXOv4 to my full size crew cab pick up truck. The results were stellar, though considering the work involved, prepping, polishing etc., then applying 3 coats the traditional way is very time consuming and taxing on the body, next time around I'm going with Can Coat.

[@PanTheOrganizer]

Thanks for the positive feedback Jay!

[@itsinthedetail9093]

You could also try Gyeon Wet Coat, it’s a spray on rinse off coating for all the car including the wheels.😀

[@pramodgaikwad1241]

Great work 👍

[@PanTheOrganizer]

Thank you! Cheers!

[@extremeoptimumautodetailin6616]

Awesome job looking great like always showing the new comets for bigginer detailers your awesome jobs be safe god bless William from extreme optimum auto detailing pr

[@PanTheOrganizer]

Thanks 👍

[@amesbears]

Love the videos

[@PanTheOrganizer]

Thanks!!

[@shots89]

I would love to see a full interior detail with an older car not a 2020 something that has been used more and pretty dirty inside I'm struggling to get a decent clean inside I don't have a wet vac atm lol

[@Paragonly]

A quick search will show hundreds of these types of videos and a few by Pan already

[@Mannystrading]

Check out detail geek

[@omarguzman2591]

check out detail groove or wilson auto detailing

[@erickabrahamdelafuentevarg606]

Yes I like to see this type of vídeo too

[@jahdel.j]

Gyeon has done it again amazing products! Awesome video Pan!

[@PanTheOrganizer]

Thanks for your support bud!

[@jahdel.j]

@@PanTheOrganizer Sure thing bud anytime!

[@kenpenguin2745]

I would like an in-depth step of polishing such as advance tips, cleaning in between passes, what to do and not to do etc. Great video

[@Scwdetail]

Quang Pan has a great video called intro to polishing that is just what you are looking for. Check it out and he answers tons of questions. I still review it alot. Thx

[@PanTheOrganizer]

Did you watch my paint polishing tutorial? Here: kzbin.info/www/bejne/jmPUm4Jrrb-NaKc

[@isirlasplace91]

@@PanTheOrganizer Hey Pan! I’m new to your channel and to car detailing. I used to drive old beater cars (12-15 yo) so I didn’t care much for the paint jobs but I just bought a 4 year old black SUV and I want to keep her shiny and protected and I want to do it myself. My question is in regards to polishing too. I live in an appartement so no access to pressure washer but I’ll go to my local manual car wash to do all of this on a quiet day so that’ll solve that issue :) As for the polish though, is there a way to polish the car without buying a polisher and pads? Thanks for posting your videos!!! I’m learning so much from you!!! :D

[@BradAxel777]

You are the best...

[@PanTheOrganizer]

Thanks!! 🏆

[@deporterdetailing]

CanCoat Pro is amazing stuff. Gyeon Certified Shop Detailer right here! 🛡

[@PanTheOrganizer]

👍🏻. What country are you watching from?

[@deporterdetailing]

Pan TheOrganizer I’m from the US!

[@justinsnow3979]

Great video, easy to do looks like. I was curious, when you have to reapply the coat. Do you have to clay and polish again?

[@PanTheOrganizer]

Just wash, IPA wipe and apply a fresh layer.

[@captaina4458]

Good question Justin Snow and thanks for the reply Pan.

[@giorgosnak9927]

So in case of just reapplying cancoat the iron stage is not neseccesary?given that the previous coat is well maintened and well cleaned

[@mann3151]

Can coat is game changer for those who likes to take care of the vehicle themselves. I'm one of those and hugely inspired by your work. How we can make sure if there is raining outside post 24-48 hours of coating and we don't clean that up, the rain drops will put spots on the paint. How to handle that situation?

[@PanTheOrganizer]

After 24 hours it won’t matter if it rains. If you ever get water spots, you’ll be happy to see next week’s tutorial where I talk about this. ;)

[@ian300whp]

Hearing a lot of good things about Owners pride products and their ceramic coating. Would like to see you do a review on them. Also, I love all your videos!

[@PanTheOrganizer]

Thanks Ian! How did you discover my channel by the way?

[@ian300whp]

Honestly I can’t remember??? I think I was looking up something detail related and came across your videos. I’ve been watching tour stuff for a while now

[@joelpettit644]

This is a great video! Thanks. Do you have a video or have your ever done ceramic coating over PPF?

[@PanTheOrganizer]

Thanks Joel. Yes I have a video right here: kzbin.info/www/bejne/bYOmmKSafNepqKM With over 800 videos on my channel, and new ones added twice weekly, you'll likely always find what you're looking for. Just use the search terms and add my name in the KZbin search bar. For example, if you type "ceramic coating PPF Pan The Organizer" you would find that video. ;)

[@Vini-Pizza]

Once again, Pan knocks it out of the park. One suggestion though. It’s great that you tell us what the products that you used in these videos. An idea of price would be good as well. Perhaps a link to buy all the items with perhaps, a Pan the Organizer discount!!! Thanks Pan!!

[@PanTheOrganizer]

Thanks for the feedback Vincent. I'm glad to read that you enjoyed the series! Did you watch all three parts?

[@Vini-Pizza]

Pan TheOrganizer no, not yet. I’ll save it for tomorrow. Btw, I did order a shirt. Couldn’t pass it up! Thanks again Pan.👍🏻👍🏻👍🏻👍🏻

[@Vini-Pizza]

Pan, I noticed your “leaf blower”? Can you tell me what brand that is? Thanks again.

[@jacksparow3193]

Hi from Greece.Great videos great channel.Just want to ask after how long you can add a second application of cancoat and after that how often do i have to use cure?Thanks

[@ziadkhalil3525]

Love all your vids. Prob the best detailer channel i found. Once can coat has been opened, how long will remainder of the bottle last ? I heard it can get thick after a year

[@PanTheOrganizer]

Thanks for the positive feedback Ziad! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 890,000 subscribers and we have over 115 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. Once you open a coating bottle, typically it's good for 1-2 months at best. Unopened, detailing chemicals are usually good for 1-2 years if kept in stable conditions and not frozen.

[@ziadkhalil3525]

Thats a shame. I was hoping to coat every year for at least 4 years. Anyway love your content and really appreciate the fact that you replied. Keep up the great work !

[@omarg9981]

Pan. Appreciate the intricate detail of use of products. How much to do that kind of detail. $$$$

[@Follz19]

Love the videos, Pan! Keep them coming, mate! A question: regarding the stage after Polishing the paint, do you recommend a dedicated product to prep the paint/remove the polishing residue? For instance, I have Meguiar's Super Degreaser, would that suitable? What about a general IPA (90%+)? Thanks for any help ;-)

[@PanTheOrganizer]

As you saw in this video, you must use an IPA type paint prep (like Gyeon Prep or CarPro Eraser) before applying the ceramic coating.

[@Carlos.Rivera]

Man... Gyeon and CarPro are top notch

[@PanTheOrganizer]

Yes I agree

[@kirbymisa]

Awesome video! I hope I can do this! How about maintaining the watermarks? If ever forgot to clean the car after downpour.

[@PanTheOrganizer]

You will be interested to watch next Saturday’s video. Stay tuned!

[@andyowen7133]

Classic pan smashing out the coatings. 👍😀. Would love to see a coating going on not in your garage. Something for the mobile detailers and hobbyists. You should do a challenge pan series. I know of a tractor that needs a clean. 😂

[@PanTheOrganizer]

LOL! That would be awesome! Detailing a tractor and ceramic coating it!

[@jaycamacho6746]

Yesterday I posted a comment on another video you did and one of the replies you sent me was asking what videos I like on your channel... well after watching these 3 part videos... this is what I like. How well you explain the products, how well you explain on how to use them.. You cover every part of what to do. Watching these videos, I feel like I'm in class to learn how to detail! I do have one question about the ceramic coating... I don't have a garage to do any of this in.. My car is always parked outside so the cure time is hard for me to do... any tips for me?

[@PanTheOrganizer]

Thanks for the positive feedback Jay. I love it. That's exactly one of the goals of my channel: to educate my viewers on proper techniques so that will empower them to go out there and enjoy detailing their cars with the confidence and knowledge that they can duplicate these steps at home. No problem if you don't have a garage. Just pick a day where it won't rain. ;)

[@jaycamacho6746]

@@PanTheOrganizer yeah that's kinda hard lol I live in Portland OR. :)

[@patrickjames3321]

I would like a video like this for inside and seats and stuff

[@Brian-fo8sh]

Pan, I’ve used CanCoat Evo and the product is great!!! I only applied one coat about 3 weeks ago. I’ve applied Ceramic Detailer and regular wash maintenance since then. Now, I’d like to add another coat of Evo. I’m a little confused on the process. Do I need to do a decon wash and IPA wipe down or can I just do a wash with Bathe+ and apply another coat? Any info would be great. Thanks and keep the great videos coming. Also, can Evo be used on the windshield? Thx.

[@jasonbrown5376]

Great video as always. I have a 2020 ram truck. I have xpel on the hood, mirrors, fenders and bumper. Do I need to clay that and spray it with iron remover? They said i can wax it but not sure about the other stuff.

[@jhall4519]

Pan, Always love your videos! Do the towels that you use with Gyeon Can Coat need to be thrown away after applying? Video request(s): For different DIY coatings (e.g. Sonax Net Shield; Opti-gloss coat) can you recommend toppings that make the car pop and the DIY coating last longer using your recommended products (e.g. Insulator Wax on top of Opti-gloss coat)-I definitely value your opinion and use a lot of your recommendations (tempered for my lack of talent and limited budget / time)! Thanks, Jack

[@PanTheOrganizer]

Yes you need to throw the towels away after use.

[@jhall4519]

Thx!!!!!

[@dannydaugherty5702]

These videos are so helpful! I have learned so much just by following your channel! Great job as usual my friend 👏☝️✨💦

[@PanTheOrganizer]

Nice to see you here and commenting too! If you had to pick the number tip that you learned from my videos, that you really enjoyed adding to your routine, what would it be Danny?

[@dannydaugherty5702]

@@PanTheOrganizer Washing my wheels first! I washed my car opposite of the way you do. I used to wash the car first and the wheels last☝️😂 also adding the two bucket method. It just makes sense 👍

[@PanTheOrganizer]

Awesome!! That’s a game changer tip right there. Work smart. 👍🏻

[@dannydaugherty5702]

@@PanTheOrganizer I keep my car pretty clean 🧼 I’m even looking into using some McKee’s waterless wash and the big black sponge 🧽

[@dannydaugherty5702]

@@PanTheOrganizer I keep my car pretty clean 🧼 I’m even looking into using some McKee’s waterless wash and the big black sponge 🧽

[@dorianchristian8568]

I love and appreciate the information. Quick question about how long does this entire process really take?

[@PanTheOrganizer]

Thanks Dorian. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 900,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. To answer your question, it really depends on multiple factors so it's not a simple answer. It depends on your experience level, how bad the paint is (does it need paint correction?) among other things. On average, a typical wash, chemical decon, clay, paint prep spray and applying the coating will take anywhere from 2 to 3 hours. If you need machine polishing, add a few more hours to the mix. Again, it will vary for every different person. But applying the spray on its own only takes a few minutes, as it's a spray on, wipe off, bingo done.

[@peterrice9460]

Hi Pan - if preparing an older vehicle (mine is 2016, unfortunately previous owner hasn’t looked after the paint particularly well, looks of swirl marks and some blemishes as well) - would it be worth using a medium cut compound or even heavy as an extra step, or in replacement of the primer step? Brand new to machine polishing! Just ordering one as we speak, have been watching your vids with great interest, fantastic description level!

[@Calonv]

Hi Pan, as always, great video! Thanks. I got a question, how to clean the towel that was used to apply the coat, any special way to clean it?

[@PanTheOrganizer]

You don't reuse the towel in this case. Just like ceramic coatings in glass bottles, you throw the towels after use. CanCoat is not your regular ceramic spray. It's a very strong ceramic coating in spray form.

[@pierre-yvesboucher8969]

Salut Pan, je me demandais s’il était nécessaire de polir une voiture après avoir passer le clay sur un voiture qui vient de sortir du concessionnaire donc neuve pour préparer avant la céramique ? Merci pour tout tes bons conseil!

[@lewisanderson6599]

Great video, i was just wondering if you have an coated car and wanted to apply a new coating for some reason, what type of pads and compound would you recommend if the paint is in good condition

[@PanTheOrganizer]

No. But if I had to machine polish a coating off, I would use 3D One with Buff and Shine Uro Fiber pads. Watch my video: kzbin.info/www/bejne/aHunp4R4qJapn68

[@taj368]

Thanks Pan for all the info I have a problem on my alloy wheels as there is a lot of Browning which doesn't come off I've got white stains which I think maybe from allowing the iron remover to dry on the wheels (this was before i started watching your videos) I used the P and S brake duster and the ironx remover but to no avail. My only option could be to take it to a car detailing specialist to see what they can do with the wheels Do you have any other products or tips you could give us 1 - remove the brown staining as the wheels have a Matt black finish 2 - remove the white stains on the Matt black finish Any advice is appreciated greatly and again thanks for all your tips

[@evertabrego4462]

Awesome video pan. Can you still apply the can coat even though you don't have a garage to keep your car inside for the curing process

[@PanTheOrganizer]

Yes as long as it doesn’t rain for 24 hours

[@bluejayrover]

Can you do a video on cleaning and protecting Xpel Film coating??

[@stuarttarry1760]

Hi pan how does this compare to last coat black ice?

[@idkidkk4410]

how often do you flip the towel when applying the coating?

[@TransitionPhase]

Awesome video! Do you think i can use wetcoat instead of cure over the fresh cancoat?

[@PanTheOrganizer]

I would wait 24 hours before wetting the car.

[@feeldafury]

Hi Pan, another great tutorial video. I have a question for you. Instead of using Gyeon prime. Can I use Rupes ultra finish polish or Rupes stand alone protection polish. Base on your review I did pick up 7 gyeon chemicals. I forgot to get gyeon primer. I got rupes polisher in a kit. Which came with the compounds and polish.

[@richardgosnell794]

Also. On the dodge ram cad wheel covers. What is going to use to get minor scratches out. Due to being hard plastic wheel cover on new dodge ram truck. Thx again

[@dexa6519]

I have an old school Japanese car from the 80s with raised white lettering on the tires...will that tire treatment work without staining the letters? if not you have any other alternatives?

[@Jaber345]

Thanks Pan, I have just bought a collector car in matte black. What happens if I put some Turtle Wax Ceramic Spray on it beside being a little more shiny? I tried a small sample area and it is still matte but darker which is very nice. Any possible damage to the paint (it’s not a wrap but paint)? Any way to contact you privately? Jacques

[@Abdulrehman-zq4ro]

Hello pan, thankyou for always sharing your experience with us. I have a ceramic coated car so I really wanna know which compound should I use to remove it. I’ll appreciate it if you can help mate ❤

[@PanTheOrganizer]

Any polish will do. Something like Sonax Perfect Finish or Rupes Yellow DA Fine polish.

[@Abdulrehman-zq4ro]

@@PanTheOrganizer thankyou pan you are a inspiration for me

[@seansaunders4617]

Gyeon is the best! 😎

[@PanTheOrganizer]

Thanks for watching Sean!

[@seansaunders4617]

My pleasure Pan, always love watching your videos. I might be a little biased since I’m a Gyeon certified detailer. 😉But no need to be since they can back up there claims etc. Quality detailing products for sure.

[@PanTheOrganizer]

Thanks for the kind words about my videos. I appreciate it. Which country do you operate from?

[@seansaunders4617]

@@PanTheOrganizer I operate from Miami, Florida USA! :)

[@MohamedMahmoud]

Hey Pan , thanks for the great content, literally two weeks ago I had no idea what car detailing was 😀, I have a question, I was overwhelmed by the amount of preparation that has to be done before using the can coat, my car is pretty new, less than two weeks, it’s had some dust and dirt on it but it actually shows some beeding, I guess that maybe was done at the factory or just because of new paint, do I need to do all of this and use all of those products and polish or a good contact wash will do since it’s pretty new ?

[@PanTheOrganizer]

Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 985,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. A new car is never new until it's properly detailed. - at the factory, the paint defects are often corrected quickly by rotary polishing which can leave marks and holograms, so polishing corrects those, before you lock that in long term with a ceramic coating for example. - vehicles are then transported by truck, train and boat so they are exposed to the elements, industrial fallout, brake dust, rail dust, etc - vehicles are often left at boat docks (when transported by boat) or in exterior parking lots for weeks or months, again being exposed to the elements - at the dealership, the vehicles are almost always poorly prepped using the same dirty water that was used for all the cars on a given day, and poor washing and drying methods leading to swirls and scratches - at the dealership, a layer of cheap wax or paint sealant is usually applied to attempt to make the paint glossy prior to delivery. It's crucial to remove any previous protection before you apply a ceramic coating, as coatings need to bond directly to a virgin clear coat. If you only plan on applying a regular carnauba wax or paint sealant though, you could decide to skip machine polishing, as those protectants can be applied over existing protection and it's not as crucial to prep the paint as well. I explain all of this in this popular video: kzbin.info/www/bejne/h5jSqqV5Ypp2g8U So you can better visualize the new car prep process, here are the steps I perform on a brand new car for my customers: RS6 Avant Performance: kzbin.info/www/bejne/gma2gmOQfq92oJIsi=mcQiMs9HBLlaqjGK Mercedes S 580: kzbin.info/www/bejne/jKLCpZmZrNesjKssi=whord2_UEFSg28UW Aston Martin Vantage: kzbin.info/www/bejne/hXzKkmavj7uHp9E Volvo XC60: kzbin.info/www/bejne/qqenc3Wbo82MfKM Tesla Model Y: kzbin.info/www/bejne/naDLnKZurbVohLs Porsche 911 Carrera: kzbin.info/www/bejne/aJTOmpysl6ukqZY Mercedes AMG GT63S matte black: kzbin.info/www/bejne/m4abq5pnob2pjrssi=oGxoCp8PWt7gTncV Audi Q7: kzbin.info/www/bejne/qmirdHWJi9OcsK8

[@cameronschooley3831]

Hey Pan, can you reuse the towel or should you throw it away after each coat?

[@bignoise6702]

Should be spraying this into the cloth away from the vehicle, being ceramic based overspray droplets will dry hard.

[@arsan_sn]

@@rudolphnash7471 i mean... he's got a point. Pan may not realized of what he was doing by spraying near the vehicle, given that he's already an expert

[@YK-Youtube]

Thank you so much for this video. I followed your procedures and applied Can Coat! I thought this product would be forgiving to a newbie like me. My first time! After curing duration (12hrs fir bewer version?), when can we start washing cars? We may need to wait 7days or so like other ceramic coating?

[@PanTheOrganizer]

Hi! I'm guessing you applied the latest CanCoat EVO version right? Gyeon recommends waiting at least 12 hours after the application before you expose the vehicle to water or rain. I recommend a full 24 hours if possible. And then, wait at least 7 days before you wash your car again. The coating continues curing during the first weeks. Ideally, I would say wait 2 weeks before you wash your car. You are correct. The same principles apply like a glass bottle coating. Cheers!

[@YK-Youtube]

@@PanTheOrganizer Thank you so much! Yes that is what I applied. So excited to see beads! Here in Seattle we have no shortage of rain! Your whole process in detail is so helpful. So thank you.

[@estecoca]

Great video and information!! Quick question. I want to use Can Coat on a new car but I have a ton of Beadmaker left over. Can I use the Beadmaker as a drying aid on a car that has Can Coat ceramic coating? Thank you.

[@PanTheOrganizer]

Yes. You can use Bead Maker on top of any protection: waxes, sealants and coatings. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 950,000 subscribers and we have over 125 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@estecoca]

You’re the man….thank you!

[@vz14_]

Excellent guide. However I want to ask. What are my options when I don't have a garage and polisher.

[@PanTheOrganizer]

You can still do all of these steps outside, just make sure you never work in direct sunlight. Work in the shade, on a cool surface. And remember to spray the CanCoat in the folded towel (so it doesn't go all over the place with the wind). Also, the new version of CanCoat, called CanCoat EVO lasts twice as long, and is outdoor friendly for the application. Link in the video description. As far as polishing, if you don't have a polisher, just note that your paint won't be improved. Paint polishing is what removes defects like swirls and scratches and oxidation. It makes the paint look glossy (way more than any paint protection can) and gives clarity and depth to the finish. Also, polishing is what removes 100% of any old protection that might be on your paint, a crucial step before applying a ceramic based protection, as the protection needs to bond to a virgin clear coat. If you have a wax on the paint currently, the coating won't bond as well and won't last as long.

[@visaggi1000]

In the Gyeon Mohs instructions it says we should wash the car after polishing. Does this count for the Primer too?

[@B3nnywhit3]

great video pan as always.. question for you, I had previously applied carpro ceramic coating to my black car. I live in florida this sun eats the coat up quick. I need to reapply the coating.. witch steps should I take to apply a coating. would it be the same as the first time or there are different steps to take? and also if you can recommend a product to remove any trees debris/liquid idk what you will call that!?

[@PanTheOrganizer]

It depends how long the coating has been applied. If it's getting close to the two years durability claim, then yes you have to restart all the steps: wash, decon, machine polishing, IPA, reapply two coats. If it has only been 6 months, you could perhaps just wash the car, iron remover, then IPA wipe with CarPro Eraser, then apply a topper like CarPro Gliss. Watch my video: kzbin.info/www/bejne/mmPadamLfr6lqtk

[@Dominik-CarshineGarage]

Hello Pan great video . I have some question : You recomend Apply can coat 2 times ? With one part and second part example 1 hours after first?

[@PanTheOrganizer]

That isn't needed. One coat is all you need. Also, there is now the new CanCoat EVO which lasts twice as long. Here: bit.ly/3w3qqq4

[@MikeDoyle247]

Any tips on removing overspray from the cancoat?

[@jozefhrusecky3085]

Great vid. One question though, what was the total time spent on this audi for the part 2 steps shown here?

[@PanTheOrganizer]

If you mean washing, decon, polishing, IPA wipe and applying the coating, 4-5 hours depending on the condition of the paint.

[@AliSatchu]

Is the iron remover ok to be used on a matte xpel ppf film? I am trying to figure out the best way to clean my car and apply the matte Gyeon ceramic coating. Any tips will be much appreciated.

[@jaanw3842]

gr8 video ,i got aquestion for you if u can help after compound and polishing surface ,we got to use IPA .but when we use IPA solution does it also take off the compound and polish that cover fine scratches also? plz help make me understand this IPA Solution thing

[@PanTheOrganizer]

True paint correction doesn’t need fillers. If you do it correctly, there should be no major swirls or scratches left. And yes an IPA wipe would remove those fillers.

[@jaanw3842]

thanks for reply, but why we need compound or polish if IPA solution will remove it eventually?@@PanTheOrganizer

[@troy14roy14]

Salut pan! Remplacer Cure par reload de carpro est aussi un bon toper quelques heures après l’application de Can coat ?

[@PanTheOrganizer]

Cure et Reload sont essentiellement le même type de produit. Alors oui. Mais quand même, lorsque j’applique une céramique d’une compagnie X, j’essaie d’appliquer le topper de la même compagnie une heure après question d’assurer une compatibilité chimique optimale. Par la suite, lorsque la céramique aura terminé ses deux semaines de durcissement (curing), on peut utiliser des toppers d’autres compagnies.

[@lukeyscorner9134]

Pan, I used the Can Coat on a couple vehicles I detailed for a few friends and I used it on my wife’s Bronco and my Bronco. I used the Can Coat Evo and this stuff is insane!! Now, can I use this as a topper on my existing Can Coat? I bought the ceramic detailer as well. Thanks for any and all input. Have a great day.

[@PanTheOrganizer]

No need to add multiple coats of CanCoat. Just maintain it with the Ceramic Detailer.

[@lukeyscorner9134]

@@PanTheOrganizer thank you so much. I haven’t used the Ceramic Detailer yet but I’m looking forward to it. So far, I’m loving Can Coat Evo and your video gave me the confidence to use a ceramic coating. Now, I’m telling everyone about it.

[@dskowron19]

@Pan The Organizer how about put QD on Gyeon CanCoat EVO? 1 Quick Detailer per month or 3? I Have gyeon Ceramic QD but I don't know how much QD I can put on CanCoat

[@PanTheOrganizer]

You can use your Gyeon Ceramic Detailer after every regular car wash if you want. Every 2 to 3 months, you will want to maintain CanCoat with something more durable like Gyeon WetCoat or Gyeon Cure.

[@QSHORTS1313]

Hi Pan Amazing video . Could you please suggest? I applied CAN coat today , hope it lasts for 6-9 months. So after 6-9 months if I want to apply again , do I need to follow the same steps such as decontamination and paint prep which can last me for 6-9 months again ? Please answer Thanks Manny from Australia

[@PanTheOrganizer]

Yes you would redo all the steps for maximum durability. The bare minimum though is to wash the car, use an iron remover, then when you are done rinsing and drying, use the Gyeon Prep to prep the surface, and apply a new fresh layer of CanCoat.

[@QSHORTS1313]

@@PanTheOrganizer thanks Pan You are the legend

[@cya442]

Hi Pan, Great videos! Greatly appreciate the steps you walk us through to coat a car. Is Can Coat similar to Xpel Ceramic Boost? I have a brand new Lexus that had PPF installed on parts of it and the installer also applied Xpel Ceramic Boost over the entire car, PPF and paint. I was planning to apply Gtechniq CSL to the Paint and HALO to the PPF but now am not sure what the best process would be to remove the Xpel Ceramic Boost before applying Gtechniq. I have been told to use everything from a 70% IPA mixture, Xpel PPF Cleaner, CarPro Reset to polishing the entire car. If need be I could do a light polishing of the paint maybe using the Primer you used as well as PPF Renew to prep the PPF. Do you have any experience with Cermaic Boost and what would be your recommendations?

[@PanTheOrganizer]

I don't have experience with XPEL Ceramic Boost, but from what I hear, it's nowhere near the durability or performance of Gyeon CanCoat EVO. XPEL Boost seems to be a light ceramic spray. CanCoat EVO is the highest performing spray coating out there. After that, the next step is a true coating in a glass bottle. CanCoat EVO is the new version of CanCoat, and has double the durability. So instead of 4-6 months like the original formula, the EVO version now boasts 10-12 months durability. But be careful with XPEL PPF, as I heard that if you use any other protection except from XPEL it might void your warranty. So check with your PPF installer first. Second, the only way to ensure 100% removal of any previous protection is by machine polishing.

[@cya442]

@@PanTheOrganizer Thank you for the prompt reply. I believe as well that I'm going to have to do a machine polishing just to be sure.

[@user-bf6go9nf6g]

Can I use ceramic retailer instead of cure to protect after application? Must I wait 12 after can coat hours to apply?

[@user-bf6go9nf6g]

Hi Pan, great video! is it possible to use CarPro essence as primer for Can Coat? (I like how essence has some silica filling capabilities vs Gyeon Primer which distant)

[@PanTheOrganizer]

In theory yes, but I haven't tested that combination personally.

[@stevejordan9567]

Hi Pan one more question. What do you like better Cancoat or DuraSlic flow X? Thanks.

[@PanTheOrganizer]

FlowX is slicker but CanCoat EVO will likely last longer in most conditions.

[@richardgosnell794]

Hello pan. Really enjoy your video. I do have a question. After doing a paint correction an getting car prep before put on gyeon ceramic liquid coating. When it comes time to do it again in 8 months or so. Does the same process have to be done all over again. Because if keep doing a paint correction over an over. You are taking layers of clear coat off correct. So what do I do. Thx an have a good day

[@PanTheOrganizer]

You only do paint correction when your paint needs it, meaning if you see lots of swirls, scratches or oxidation. You want to preserve as much clear coat as possible. If you wash and dry your car with safe washing methods you shouldn’t need machine polishing. I polished my car only once since I bought it new over two years ago. So if your paint is in good condition 6 to 8 months later, you can simply wash, use an iron remover for decon, qui paint prep and then reapply a fresh coat of Can Coat.

[@jericoleandrocortado9735]

Is it okay to use IPA after contact washing my car? It's about 2months old only. Not too confident of polishing and using clay yet. Also, iron remover that you recommended are hard to come by in our part of the world. So my system will look like (for now): foam wash, contact wash with ph neutral shampoo, IPA then TW SnS then topped by TW ice dry wax.

[@Loki_003]

Great Video Pan! I’d like to ask if I have a ceramic coated car can I still do the chemical and mechanical decontamination when applying topper such as gyeon can coat? Thanks!

[@PanTheOrganizer]

You can (and should) do chemical decon, but skip the clay step.

[@Loki_003]

Pan TheOrganizer thank you so much Pan! I'm a big fan from Philippines! Keep inspiring your fans with these awesome vids & tutorials

[@PanTheOrganizer]

Thanks for your support Niell! Cheers from Canada 🇨🇦! What’s your favourite video on my channel so far?

[@Loki_003]

Pan TheOrganizer I personally like the paint polishing tutorial for beginners. I have not yet tried polishing my car. Maybe in the near future 😂 thanks pan!

[@JJautoshow]

Amazing Video, can we apply this ceramic coating in an open environment? Like say may be early morning and not in sunlight?

[@PanTheOrganizer]

Yes as long as it doesn’t rain for 24 hours.

[@JJautoshow]

@@PanTheOrganizer Thank You, is it advisable to use rubbing compound before polishing?

[@PanTheOrganizer]

You have ton assess your paint. If you have heavy swirls, scratches and oxiation, start with a compound first. Then move to polish. If you only have light scratches, just use a polish.

[@JJautoshow]

@@PanTheOrganizer Thank You so much for valuable suggestion

[@samuelvazquez7280]

Hellow 👋😀 On what surface of a vehicle can gyeon mohs evo be applied to? Thank you very much!

[@samuelvazquez7280]

*surfaces

[@PanTheOrganizer]

Pretty much all the exterior surfaces: paint, wheels, glass, plastic trim and lights.

[@samuelvazquez7280]

@@PanTheOrganizer Thank you!👋😀🔥🔥🔥🔥

[@trooper_f30]

what are your clay recommendations, I used to use the meguairs classic quick clay kit but I am looking to change without breaking the bank.

[@PanTheOrganizer]

kzbin.info/www/bejne/r2W4hnube5mhp5o

[@lulex.652]

You do such a great job. i would love to see some undercarriage cleaning if posible. Also ive seen people cleaning their seatbelts and wipers with some weird brushes.

[@PanTheOrganizer]

Thanks! Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 920,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. My undercarriage cleaning video: kzbin.info/www/bejne/aJeydpSEhKyHfKssi=xQTYEANmkXtKAAcU

[@lulex.652]

amazing interraction. Ive watched every detailing video on your channel except this one. thank you very much. Btw, greetings from Puerto Rico. Its a bit warmer down here. Kinda hard to find a day where it doesnt rain to fully detail my cars, plus we get a lot of storms if not hurricanes this time of the year.

[@PanTheOrganizer]

Stay safe! 👍🏻

[@amill1563]

Will you be doing a sequence for the inside?

[@PanTheOrganizer]

If I see many requests for something like this yup!

[@miscellaneous5215]

Hi Pan, have you ever applied Can Coat with a rectangular microfiber applicator instead of the towel?

[@PanTheOrganizer]

No. With CanCoat, I find you can speed up the process with the towel which covers more surface area quicker, compared to a small microsuede applicator. There's a reason why they came up with this system over at Gyeon, with precise instructions. But feel free to experiment and see what works best for you. Welcome to my channel. You discovered one of the biggest car detailing channels on KZbin as we surpassed 985,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

[@jacksparow3193]

Hello.Nice detailed video.. One question please.. Which steps we have to follow if we have already applied cancoat before about 5 months.The car was for long time in the garage without moving.I just to want to refresh the coating..If i make clay,iron remover and prep will be remove or affect the previous coat?? Thanks in advance from 🇬🇷

[@PanTheOrganizer]

Yasou! If you just want to refresh and add a new layer of the same CanCoat, you can just wash the car, use iron remover, Gyeon Prep to make sure the paint is ultra clean, and simply apply a fresh layer of CanCoat.

[@jacksparow3193]

@@PanTheOrganizer You are the best Pan!! And speak also Greek..Efharisto(thanks)

[@ertansarikavak4774]

Hey, i wanna ask a question. I heard a lot of that the inviromant that you do the coating must be dust free or like super clean otherwise the dust will stick on it is that true or not. Thanks and greeting from Belguim.

[@PanTheOrganizer]

Yes and no. As long as it’s not in a hugely dusty environment (like the desert lol) or on a windy day you’re fine. What is more important is to not work in direct sunlight and make sure it doesn’t rain for at least 24 hours after applying a ceramic coating.

[@KicoMendoza]

Hey Pan! Having watched this video and your CarPro Lite demo video as well, which would you recommend for a first time ceramic coater? And would you stick with the same brand for maintenance or is it okay to use CarPro with Gyeon or vice-versa? Thanks again!

[@PanTheOrganizer]

Hands down CanCoat. They released a new EVO version which should have almost double the durability. I speak about it in my video here: kzbin.info/www/bejne/lZK9ppxseNCqhZo For maintenance, you are free to use products from any brand, as long as they are compatible with ceramic based protections. So yes you can use Gyeon Ceramic Detailer on a CarPro coating for example. Or CarPro Elixir (ceramic detailer) on a Gyeon coating.

[@KicoMendoza]

@@PanTheOrganizer That's what I was leaning towards do thank you for confirming my choice! Based on your video the spray and wipe ease of Can Coat is hard to pass up. Thanks again! Keep bringing the amazing content! 🙏🏽