Chainsaw Milling Using the Granberg Alaskan Winch

After making my first cut then milling the edges off a log, it’s time to use the @GranbergInternational Alaskan Chainsaw Mill to cut boards or slabs. This Granberg Alaskan Winch is an awesome addition to what’s already been a literal life-changing setup. It saves time, wear-and-tear, and tends to provide a smoother/more efficient cut on longer sections of logs.
Thanks for watching,
Matt - Overkill Woodcraft LLC
Chainsaw Mill Edge Guide Comparison:
• Chainsaw Mill Edge Gui...
Chapters
0:00 - Intro
0:55 - Components
2:03 - Install
4:07 - Dirty Chains
5:08 - Cutting
9:39 - Conclusion
*For more woodworking tips, content, and tools I use:
Instagram: @overkillwoodcraft
/ overkillwoodcraft
TikTok: @overkillwoodcraft
/ overkillwoodcraft
Amazon Affiliate link to general tools used:
www.amazon.com/shop/overkillw...

[@dmend7123]

when you add up the cost of the saw, and saw repairs, and gas and chain oil, and like you said, you only get 4 or 5 cuts per chain, does it pay to mill your own lumber this way?

[@OverkillWoodcraft]

Valid question. Hard to factor the cost of the saw per milling if you're using it for more than just milling and getting more than one milling out of it, but the cost there isn't much. I haven't had to repair my saw at all and I've been using it for years. Gas and oil depends, but it isn't much. Depends on the wood for how many cuts, but I've had a ton of use per chain. Here's an example, a few months back I spent two days milling up roughly $6K (market price) in black cherry. All it cost (besides my time and labor) was a can of mixed gas and a chain/chainsaw cleaning afterwards. 100% worth it to me.

[@diener586]

What kind of echo chainsaw do you use?

[@OverkillWoodcraft]

A heavily modded CS-590 with a 24" bar, pretty happy with it.

[@Powell343]

Were the chains used here specific ripping chains?

[@OverkillWoodcraft]

Yes, skip tooth is another option. Definitely wouldn't recommend a normal chain for this.

[@purandraketaki9113]

I Am from India I need you chainsaw mill attechment

[@OverkillWoodcraft]

Look at the Granberg International website, I'm pretty sure they'll ship it there.