Champion Generator Wont Start / Generator Wont Run/ How To Fix Generator/ Generator Carburator Clean

Watch start to finish as we completely go over this Champion generator from diagnostic to fixed! This is a complete walk through. Spark test/carb clean and oil change.

[@iiu82_75]

*100% best **Generater.Systems** I have used. A test for hurricane prep here in Louisiana: three AC units, 5000, 5000 & 8000, 3 fridges, 2 device power setups, 4 flat screens....AND I had 40% of the power meter to spare.*

[@williamgreen5401]

I would recommend getting factory size line. To big is always better as if it's too small sometimes the fuel can't keep up with the machine hope this help please subscribe

[@Michael-mz8qy]

Your information is spot on. I rather have a long video of step by step helping me then to show it and I get lost. Thank you very much for the step by step.

[@Kate-turbokateproducts]

I'm 71 year-old female was having trouble with my generator this winter and you've totally fixed it for me online and I can follow you very easily to repeat the steps thank you so much for the education

[@whosoever9198]

Dude, thanks! I’m having issues with mine. You described my problem. I took it to a lawnmower/small engine shop and they said it needed a complete overhaul! $385! That’s about what I paid for it brand new. I’m gonna pick up some cleaner and do it myself! You’ve given me the confidence to do it. The good Lord will guide my hands as I try to be a good steward of His blessings. Thanks!

[@thesqueek72]

Thank you so much. Your information and the way you present it is so appreciated. You were more helpful then any other video on KZbin on this topic. Thank you again for helping me to feel more confident on doing this myself.

[@rpetty]

Best video on basic troubleshooting and carb cleaning I’ve seen. Thank you.

[@marioescalante8456]

Thank u for everything. Some ppl know how to fixed and don’t like to show others . Appreciate

[@vicBellamonkey]

Thank you !! I'm glad you showed everything on how to ..A girl here getting ready to remove my carburetor..Thanks

[@stevenndonga6963]

Thank you,you have made it a lot more easier than I thought

[@RAWGRIP54]

Expect this guy to blow up anytime.

[@bonekuhobonekuho2658]

Be careful testing for spark with fuel tossing out. Great way to start a fire.

[@dannyj5688]

A little suggestion to tell your customers.....When they are done with generator, before they store it, shut off the fuel valve and run the gas out of the carburetor.....Keeps what you had to do from happening.

[@TURNKEYiNK]

Manual does have instructions for long term (greater than 6mth), storage.

[@theidahodian4518]

I learned a couple of things I didn't know. I'm glad you said to start all the screws before you tighten them. My friend always tightens every screw as he inserts it. He's always bewildered when he can't get the last two oil pan bolts in after he had tightened down the first ten. :) Thanks for the video, Liked and Subscribed.

[@williamgreen5401]

I Appreciate your comment :)

[@charlieholland2265]

great video bud thank you !! very informative I got to take my carb apart and clean it on my generator and your video is going to make the job a lot easier

[@dennissemmel4584]

Thanks William.....my first carburator job.....and successful!

[@orlypalomar]

The video is mirrored left to right. Half the time, my brain keeps telling me your're working the bolts wrong. lol

[@Johnnyboy_584]

Thank you very much for the detailed video and clear explanations. Much appreciated. Got all I need to give it a go myself.

[@grenadabygeeps1122]

Thanks for your in-depth info, now I can try to work on mine too

[@marknagele]

This has been the best video I've seen

[@rioriggs3568]

THANK YOU... great video. My "like new" Champ generator wouldn't start. I followed these steps and got it to start on the first pull. Carb was gunked!

[@johnathanteal3856]

Awesome video, very detailed and saved me over $100. Thanks.

[@jeremyharris7161]

Very awesome vid. It explains everything so well. Thanks allot from south africa

[@TripleGAutoDetailing]

Awesome video... Thanks for sharing. 👍🏻

[@deanfronheiser6005]

Great job very informative

[@vicBellamonkey]

Great video!!

[@whatsgnu]

Great Video!

[@lisandromelendez9545]

I was given a generator, and this really help me. Actually that the same one that I got. 👍👍👍🤙🤙🤙👍

[@kevinarnold213]

Nice job you are doing great tyvm

[@psychosweetheart1524]

Thanks!

[@thehighriseconstructionob9679]

You are really awesome thank you Shearing so tidious flostrsting crazy staff so accurately and nicely, I wish I can have great patience & strength like you sir thank you so Shearing so genius video. Amazing

[@williamclements273]

Is English your second language?

[@kimmalinowski8649]

Any tips on cleaning a dual fuel carb with a solenoid? Any major differences? Have an ethanol storage problem. Draine out orange gas from storage.

[@30grayboy]

Thank you

[@jeremiahharm69]

Hey on the set screw that holds in the long jets in the center of the carb the one you took out with a screwdriver, is there a hole in the middle of that set screw that needs to be cleaned out as well ? or is mine clogged

[@rikardo128]

Thank you so much you safe muy life

[@roland349]

Nice job

[@williamgreen5401]

thanks they don't always go that good !

[@williamgreen5401]

Thanks

[@marvinhouston9043]

Thank bro

[@williamgreen5401]

Your welcome

[@zodaguado6655]

Do I need to clean the carb if I only use propane and if I use propane does the jet pin need to be cleaned too

[@robertsamarati8235]

I drained the gas out of mine and cleaned the air filter. Topped off my oil and cleaned up the spark plug by burning with my propane torch. It started right up after. Everyone should also use premium gas. I have the Champion 5500 and it got me through hurricane Sandy for 10 days.

[@williamgreen5401]

Thats very smart. With good care and maintenance you equipment will be there for you when in need

[@maryjanemoore-lx1lg]

KA BOOM 💥

[@beemorgan3539]

good video but at times hard to see some things, suggest better lighting for the next time, I have learned enough to tackle my gen ... many thanks

[@thehighriseconstructionob9679]

How many gauge wire you use and what kind please let me know sir

[@luislujan4671]

I have a general on a rv it only starts wen u put gas in spark plug hole it stays running but won’t start up again unless u put gas. New spark plug new carburetor new batteries oil good. Any sugustions I’ll read them here thanks

[@TheSkillkeeper]

With fuel sitting in the combustion chamber (on top of piston) will likely require a oil change because the fuel will leak past the rings into the oil. At the very least check the oil and check for gas contamination.

[@user-hk8uu2qm9t]

Premium gas only has higher octane so it burns slower. Its no better the regular grade.

[@kevinarnold213]

In Michigan premium has no ethanol the lower grades have it

[@Myke_Lemons]

Absolutely great tutorial. However in June of 2024 that entire carburetor with new seals is $30 Canadian. That means it's probably $25 US. While I appreciate the lesson, that is a throwaway carburetor

[@robertsamarati8235]

Before I store the unit I burn off what's left in the gas tank. Then I turn the gas to the off position and start it up again to burn off whatever is left behind. in the line.

[@robbigemon1868]

You should have showed where the lil spring goes to governor

[@DHSFEMA]

A good rule of thumb is first check oil & gas then spark 😂

[@josepablo6309]

I did all that spar plug,clean carburator,spray starter fluid and still no start

[@TerraNovaSpirit]

🙏🏼🌹🌷🌸🌺🙏🏼

[@josepablo6309]

Little oil in carburator

[@haroldjohnson3591]

HELLO SOME BODY. LEFT THE GAS. VALVE. ON. ...SO. YOU. SHOUD. TURN. OFF GAS. AND. LET. THE. MACHINE. RUN OUT. AFTER. EACH. USE.

[@thebatmom]

So i was seeing if the spark plug has spark, but its shocking me

[@Umakemelaff]

The images are backwards!

[@craiggaito3496]

Poor audio-can't hear you. Sounds like your in the other room dude.

[@AmericanConstellation]

Dude, you are lucky you didn't cause a fire.

[@bryanmildenhall1318]

You need to get a microphone that's clipped to your shirt or something you can barely hear it what you're saying in the whole video

[@williamgreen5401]

I'm sorry your having that issue. On my end and several other viewers have not experienced this issue. Perhaps there is something going on from your end ? 🤔 Your 100% right I forsure need some upgraded equipment! 😀

[@bryanmildenhall1318]

@@williamgreen5401 anything is possible except that I would have the same problem on every other video not just yours but I appreciate the response anyway. I'll keep watching some of your videos and see if I can make any suggestions.

[@williamgreen5401]

@@bryanmildenhall1318 thanks kindly there are alot of upcoming videos :)

[@davidb2869]

I noticed the screws are turning clockwise to loosen and counterclockwise to tighten. Is this a reverse image . The lettering is reversed as well. Thx Dave

[@pamr5459]

That’s weird cause I can hear him super clear!

[@walterschneider7580]

How many "ums" or "ohs" can you get into a video. Do you know how irritating that is?

[@johnfrie7273]

You really need to stop saying“UM” after every few words. It is so distracting.