Change the oil and the oil filter Peugeot 208 mk1 1.2 PURETECH 🛢

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛢 Find out what oil type and quantity is right for your engine : maclede12.co/OilSelector
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Oil filter : bit.ly/oilfilterLS867Ben
- Motor oil : bit.ly/huileSPECIFIC23120W30fr
- Drain seal : bit.ly/drainseal813052en
- Pre-oil change cleaner : bit.ly/preoilchangecleaneren
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Oil change and the oil filter on a Peugeot 208 1 1.2 PURETECH.
Discover the world of UseTool EN
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your 208 1 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- Socket wrench
- Spider wrench
- Measuring cup (optional)
- Piece of tissue
- Liquid collector
- Funnel (optional)
- 8mm Allen socket
🔝💪Safely lift your 208 1 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- Don't perform this operation when the engine is still hot, as you could seriously burn yourself.
- Be very meticulous when filling the engine with oil, especially on a Diesel engine. Never go over the maximum level indicated.
Usetool's infos
Tightening the new filter by hand is enough to set it in place.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] DIY: Making a liquids collector : • ASTUCE : Fabriquer un ...
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • ASTUCE : Soulever son ...
- [ USETOOL'S TIPS & TRICKS ] Unscrewing a blocked oil filter : • ASTUCE : Débloquer un ...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati...
Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.
0:00 Intro
0:17 Oil change
3:00 Remove the filter
3:54 Put the filter back
4:24 Add oil
5:06 Oil level

[@UseTool_EN]

BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈 📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱 ⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

[@robertwyllie1601]

Great job guys, easy to understand nice step by step instructions 👍👍my question is if you don’t have that clamp to unscrew the oil filter, would it be acceptable to hammer a old screwdriver in too the filter and lever it loose ?

[@vapex5462]

it's very nice that you are doing instruction videos but you should learn first about what car and what engine you're dealing with because you are risking your clients with killing their engines it is strictly prohibited to use engine flush or any oil cleaning additives in the 1.2 VTI\puretech motors. that's because in this motor the timing belt is located inside the engine while being lubricated by the engine oil. using flush in this engine is strictly prohibited by the manufacturer because it's damaging the timing belt and if you did use it in the worst case the timing belt will tear up with all the sorrowful consequences and in a better case, the outer layer of the timing belt will degrade and contain the oil with its fractures clogging the oil paths and following to oil starving and engine rollup. now you need to change the timing belt as soon as possible to avoid further damage. also, you're using the wrong oil, the manufacturer recommends specific 2297 oil (mobil1 esp or total quarz).

[@user-sp6eb8ht4t]

This is not correct. 5W30 2297 is ok, but 0W30 2312 is more specific and suitable for the car. No damage for both cases, I will recomend the 0W30 is the manufacture request. Secondly, doing a flush with the old oil, especially if it is 5W30 or above will not damage anything because it is for cleaining deposits and will make oil be a little bit thin than it should. The best choise is SeaFoam for flush this type of engine. You can drive it with 3 ounce more than 1000 KM total with no problem. It wont damage any engine because it is a little amount and work perefectly.

[@peterkobea5539]

Excellent information

[@jacopo952]

@@user-sp6eb8ht4t I am looking for this information myself. For example on the 2016 50kW 1.2 engine, Total seems to recommend its Quartz INEO 0W-30 oil, with Alternative recommendations: EO PSA 2290 5W-30; EO PSA 2296 5W-40. This is a ACEA C1 oil, which is not what I expected, being a naturally aspirated engine with no FAP.

[@ianbarnes961]

What is the torque setting for the drain nut/plug?

[@millitaryofficial913]

30nm I’m pretty sure

[@jacquesleroux5187]

Great video but the links dont dont give you the desired information. I wanted to check how much oil i need to put in but the site didnt give me the info after filling in my cars details.

[@dude9936]

Yeah, great video... But doesn't look professional when funnel not used during filling..

[@unitedwestand201]

I do not like the dipstick colour yellow. How do you know if the engine oil is at the max level. I cant see any oil because of the dipstick colour.

[@szym1561]

Me too. I can't tell how much oil there is and I have this car. Have you found any solution please let me know.

[@sparkyauris]

Same here! Any solution?

[@stragulus]

5:37 Right? I can't tell for the life of me after a fresh fill like here.

[@jacopo952]

drain plug is 42 Nm

[@markwarnberg9504]

TIPS: Car Ramps are more practicle for oil changes. Oil Changes can be MESSY!! Change the oil filter first, this is so you dont have too go fishing for it if it falls into your oil pan full of hot oil in case you loose your grip! If it´s a Spin On punch a whole in the bottom to drain off the oil inside the filter.