Changing Wheel fast & easy with a Impact Drill

[@zaiah9252]

While the old-school way is rewarding in work, this just makes things more convenient. Love it!

[@fabiandempewolf2820]

I use this since years. Works awesome. Change all 4 wheel in 6 minutes 👍🏻

[@TheMetalist]

I knew i was not the first one 😅 i guess i would have allmost the same speed. "Challenge accepted" 😂👍🏻😁

[@Stagmike]

Yeah but does it screw well as the proper machines at wheel changing stores?

[@fabiandempewolf2820]

@@Stagmike I use a impact wrench from MAKITA and a 3ah akku. It has much more power you need for a tyre change and you can work free without any airpressure hose. Loosen axlescrews with a 36mm nut? No Problem 👍🏻

[@garybrown9719]

Fantastic Working a job for 4 years 4 supervisors present supervisor is young and lacks experience. But its ok I'm getting older and plan to retire in four years. Just have to pace myself and stay healthy. Im a mechanic and certified welder I love welding and build tools to make life easier. Necessity Is the mother of invention

[@aaronmunro5818]

I'm amazed at how virtually no wheel-changing videos on KZbin show the use of wheel hangers/pins. They're absolute game-changers and a must-have for driveway mechanics. The wheel won't drop taking it off, and lining up the lug holes for the bolts when installing the new wheels becomes super easy.

[@mrobvious1100]

I'm not quite sure what you're referring to but I'm going to look for those myself. These 20-inch tires on my SUV weigh more than I do and trying to pick up a tire and push it onto the lugs is a bear at 64 years old. My Mercedes has two holes in the hub that you screw these 5 inch bolts into to slide on your wheel so I'm guessing you're referring to something like that that must extend the studs out for 5 in thanks for the suggestion

[@momoo5843]

Dude this video is really cool. Thank you for making it hahaha chaning a wheel under 1 minute and with zero physical effort

[@robertodeleon-gonzalez9844]

This is what I need! Only one thing - tighten the nuts by hand! Otherwise, you may strip the threads, and make it impossible to remove without this power tool.

[@frederickneal4781]

Exactly! I agree.

[@trentmorrison6074]

From over torqeing or cross threading?

[@robertodeleon-gonzalez9844]

@@trentmorrison6074 Over torqueing. Car mechanics here are only too happy to tighten a nut with the air-driven tool until it can hardly be removed by hand.

[@trentmorrison6074]

@@robertodeleon-gonzalez9844 would it be possible to over tighten with lets say a milwakee m12 wrench? That my impact tool, 3/8.

[@lugrand75]

I'd mostly about shredding the threading on the scissor jack

[@mastershredder2002]

Star pattern, junior.

[@Voltermort]

I don't know why I never thought to do this! nice channel!

[@TheMetalist]

Thank you 😊

[@mariococo8293]

I have the same jack. Good to know it can use the same trick : )

[@JB-sc3er]

Unbelievable!!! You’re the man!

[@saitejagatadi9711]

0:13 Could you please let me know what is the mm of this yellow socket.

[@TheMetalist]

17mm

[@saitejagatadi9711]

@@TheMetalist thank you so much for your reply 😍

[@faridaishaque9862]

Where to buy this?

[@saadjan3229]

Which drill is enough to remove those bolts? I mean power wise.

[@parijatsinghal4729]

Came here looking for this very question answered

[@jubhgioubgob]

Any impackt wrench that can do around 500nm

[@Eric-mb1do]

What kind of drill is this and lug nut remover?

[@DuyDepTraiPhoBaTrieu]

Hey isnt it too much torque with that machine? Too tight might be dangerous, damaging the thread.

[@TheMetalist]

Speed 3, max 115Nm

[@MrAnaiwan]

hi , is there any other tools involved other than scissor jack?

[@unknowntosociety01]

That was satisfying to watch

[@hoomalimali6334]

Very clever ~ Thanks!

[@brad5301]

No disrespect cos i love you're channel but watch out doing this with an impact wrench as i have done it this way and stripped the threads on the jack and the car dropped to the clean threads which was only a couple of mm so not that bad

[@TheMetalist]

Yes thats right if its getting really used i will thorw it away and get a new one 😐 better safe than sorry 😊

[@saturnmedia1]

Grease the threads, dang it!

[@minidocstv3339]

Genius exactly what I needed to know

[@shellybelle6781]

It tore my life up.

[@erykah7596]

Dam I love this!!!

[@GregoriusSu]

Hi, very interesting video. May I know how you control the torque? So it's not too tight

[@sevenonsere6399]

Drop the Amazon link bro

[@paleologosifantis8305]

Just a little hint: clear thoroughly and lube with oil not wd40 the threads of the jack to reduce heat from friction you really don’t want the threads to snap during elevation…

[@palette_1563]

So most sockets will fit onto a jack?

[@joelewis3634]

That’s brilliant

[@JacobGagoOfficial]

What drill are you using?

[@AbhishekkKumar-hn9ll]

Aaj se tu mera guru😔

[@baldhead1295]

Pls help is this a universal drill bit?

[@TCBABY1]

Good work

[@TheMetalist]

Thank you 😊

[@sajedsajed9876]

I like this profession

[@gyuubamz]

What is the name of the jack?specs also

[@mangakhawlhring3054]

Hahaha Smooooth👍🏾👍🏾👍🏾

[@urgencylockout]

And just like that, it gets done!

[@chrisrockingstone88]

Wow!! Less in 5 minutes 🎉

[@TotalCoreDump]

So no torque wrench?

[@0ohm738]

Nice!

[@ricgxnzo]

Yeah, I'm buying one of these.

[@Olds_Pwr]

If I recall, eventually those jack screws will start to pit after doing this 20 or so times.

[@moparrdudee87]

Hell nah. Always tighten by hand first! Then hit it with the Ugga dugga gun.

[@charles17508]

Boom try the hercules ultra torque 👌🏻

[@58caliber]

10 miles down the road the wheel and tire leave the vehicle because you forgot to properly use a torque wrench as the last step. Been there experienced it while driving an 18 wheeler. Tire shop did the exact same thing you did with an air impact gun. Didn’t check the torque on the lug nuts. At 55 mph the steering started shaking and the right front tire and wheel ended up in a farmers pasture. I got lucky and ended up in the emergency lane on the right shoulder off in the grass.

[@TastyLemon123]

very helpful thank you

[@Johnsua-lr3qw]

Is funny the other day i did this to swap the oem wheels for the summer ones and it was so easy and now i found this video 😅😅

[@carloslopez-lt1zl]

Thanks good job

[@JimmyJohanes]

bro is qualified for F1 team

[@godwinchelsea4244]

Wow super

[@brianoconner3090]

Thank you for sharing this but you should have lowered the car before torqueing the nuts in star pattern.

[@keenanjoseph1245]

How many N.m does the drill need to do that?

[@evenito9455]

300 newtonmeters is more than enough to do this kind of job

[@mortierul666]

60nm.....with a simple normal drill without impact

[@ronniepenaflorida635]

I think its an impact wrench not impact drill... BTW thanks for the info

[@OrangeCounty92]

I stopped doing this. Impact wrench kept breaking those cheap jacks. Ended up buying a real jack.

[@Abdullah_M_T]

Very good

[@ljavery10]

GOAT

[@Vidishish]

Hand threat them first so you dont cross threat

[@user-mg2uh8np6c]

Bravo!

[@garthvooder1402]

I subscribe to because of this video🙂

[@charliethomas2219]

😂😂😂😂😂 my whole point exactly

[@greatestever9393]

what type of jack???? an is this a impact drill or wrench

[@danlawler670]

What brand impact and drill do you use?

[@TheMetalist]

Its a Fein ASCD 18v

[@jshadnot]

@@TheMetalistany cheaper recommendations?

[@evenito9455]

Dewalt DCF921 or Ryobi R18 (many different ones under the R18 name, but you need 300 newtonmeters or more)@@jshadnot

[@F9oLY]

@@evenito9455i have the a dewalt drill but what kind of bit do i need?

[@bhanukiran1480]

Can any one share the online link please

[@celiwekhoali3830]

Wow❤

[@muraleedharanmuraleedharan5865]

I want to buy WCH, where do I get it and what is the rate

[@evenito9455]

what is WCH ?

[@jesseg8107]

NASCAR 💨💨💨

[@wolferiin62]

super ideja

[@TheMetalist]

Thank you 😊

[@itsjuneHQ]

Bad ass

[@loveeveryonepeace9081]

Nice

[@syahtech1616]

Bull, under 1min,.. good

[@louf8335]

Lol. You should never torque lug nuts while in the air. Lol

[@rajdeepsir]

❤

[@markellrobinson4447]

WOW

[@JamesJohnson-mu7zh]

God bless

[@Murge816]

Bro need to work for NASCAR.

[@lugrand75]

That was a wrench, not a drill

[@DPH1301]

Nascar speed at home lol

[@DezhOG7]

Absurd

[@BeeRich33]

holy shart An impact drill for removal? What kind of torque for application? This got me wet.