How to build a OZeRES - 2 Metre electric glider Part 4 Final fit out motor/prop/esc/battery

[@michaelwhinnery164]

I can guarantee you nick... this will instantly become your favorite plane.

[@tonysmith4142]

15% was spot on Nick, thank you...left enough pitch down to loose height quickly and a small flare on landing.... Just need to do the same for the motor run now, there's a lot of power in that little motor!

[@NickChittyFlying]

Great news buddy i will do a flat field video :)

[@KetilDuna]

Thank you for another superb build video. One thing I would add to your check-list is programming in high motor break on the controller, to prevent the propeller windmilling after the climb.

[@NickChittyFlying]

Thanks good tip

[@davidpiper3652]

Nice. A lovely touch on the spoiler. When cutting wire you either never find it again or A&E remove it from your eye!

[@NickChittyFlying]

Yep I still have some carbon in finger

[@richardo212]

Once again, a super build video with lots of excellent building tips. I like how the complexity of each of your glider builds (the complex FVT3 wing excepted) has slowly ramped up - but your message is: "take your time, think it through and it'll be fine".

[@NickChittyFlying]

It flew a peach at woolacombe at 7.30 am 😍

[@CirrusRC]

Enjoyed this build, lots of useful tips. Thanks for sharing. Clear covering looks nice but glider turns stealth at height. 😀

[@NickChittyFlying]

I was surprised how good it was on a flat field it shimmers in the sunlight 😍

[@tujunga10]

Nagyon köszönöm, hogy láthattam a videót. 👍Gratulálok 🍷! t.

[@chrisbeck6722]

I recently built a fRESh which looks a similar construction to this. For the spoiler I put a small magnet on the end of the servo arm and this mates with a length of steel wire on the underside of the spoiler. There are also 2 small pairs of magnets that came with the kit to hold it closed. I have a video but can't attach to this comment.

[@NickChittyFlying]

Nice idea I might try that on the balsa dune freak

[@chrisbeck6722]

Here's where I got the idea kzbin.info/www/bejne/roC1fZiJfL52pMk I also set the servo to open slowly to give me a chance to feed in some elevator.

[@tonysmith4142]

Hi Nick, Did you need to have any elevator compensation mix for the spoiler? Does it pitch up or down? Cheers Tony

[@NickChittyFlying]

Hi Tony it pitch’s down I have about 15% up elevator preset. I deploy brakes on a a switch

[@bleak0218]

Hi, is this pushrod method better then a torsion spring linkage for the V-tail?

[@NickChittyFlying]

On large electric glider yes imo

[@mikebell9536]

Hi Nick how does the motor perform in the glider mate excellent video by the way 👍

[@NickChittyFlying]

It’s climbs ballistic at 30s it’s out of site. I trying some new tricks for a flat field review

[@mikebell9536]

@@NickChittyFlying looking forward to that video 👍

[@Rob-fy9iw]

Hello Nick! Great build series. Going to start my own OZeRES build soon and have a quick question about covering - did you cover the fuz and air brake or just paint them? Undercoat? Thanks for the assistance.

[@NickChittyFlying]

Painted with car paint mate

[@NickChittyFlying]

kzbin.info/www/bejne/kIjJk42GrrGaaas

[@Rob-fy9iw]

@@NickChittyFlying thanks!

[@tonysmith4142]

Hi Nick, Just about to start building an Oz Res 2, was wondering what servos you used? I'm trying to keep costs down! already gone with your motor recommendation :) Cheers Tony

[@NickChittyFlying]

10.40 mins from component shop

[@andyharrold5076]

Are they KM 303A, can only find 03A

[@tonysmith4142]

@@andyharrold5076 I used KM1002MD

[@andyharrold5076]

@@tonysmith4142 cheers

[@fredgerring8890]

How can this kit be purchased for US customers?

[@NickChittyFlying]

Look for armsoar.com ready built or performancemodels.com.au if you want to build

[@robmorgan111]

What motor is recommended ? And Battery /esc Thanks

[@NickChittyFlying]

Motor in the description mate with links mate

[@robmorgan111]

Hi , how did you do the coloured ( black ) finish on the ribs etc ?

[@NickChittyFlying]

Car spray paint 👌

[@paul-hill]

Did you say what receiver you are using and is that part of the cost to buy.

[@NickChittyFlying]

Futaba R3008SB 8 Channel Receiver that is extra mate

[@alexkerr306]

Cool..

[@truth409]

Motor = boring usually