Part 2 of the led update from HNAsupplies AKA Andy Brooks, in this vid in do the H1 and H7 front lights. So now all that is left is the indicators which Andy has promised to send me asap. So stay tuned for that. Also i will be doing the 3rd brake light in the boot.
@muzarnus3 жыл бұрын
is it safe and will nothing burn? I don't know anything about electricity, but I've heard that cables and fuses can burn out, if it is completely safe, I would like to do it in my car. thanks
@neilfinch83312 жыл бұрын
Are these just plug and play mate
@ChazzCoombes2 жыл бұрын
@@neilfinch8331 hiya Neil, yeap they sure are. Only thing is you might need to tap a ground wire which is easy to do.
@petewilliams5517 Жыл бұрын
Great video chazz bit fiddley mate im glad iv got adaptive Xenons headlights hope your well mate 👍🏻
@paulmayou3703 жыл бұрын
Great work as ever bro loving the new tools makes jobs a bit easier
@ChazzCoombes3 жыл бұрын
Cheers bro, means alot.
@paulmayou3703 жыл бұрын
@@ChazzCoombes your welcome 😇
@ChazzCoombes3 жыл бұрын
@@paulmayou370 the new tool was worth buying by the way to bro.
@anthonyellis1355 Жыл бұрын
Have you done a mod for the folding mirrors on the mk4 like you did on the mk3
@ChazzCoombes Жыл бұрын
Something im looking at doing soon i hope.
@sarchizvasilealexandru52 Жыл бұрын
I have the same car but I don't know how to turn off the headlights with the engine running.
@Damiannott3 жыл бұрын
Hi just bought pair of same bulbs and i have a cambus error :(
@ChazzCoombes3 жыл бұрын
Hiya sometimes this happens but there is no issue. Mine sometimes shows this but then it goes of. I will be explaining in an up and coming video on these.
@Damiannott3 жыл бұрын
@@ChazzCoombes I just bought from UKEbay canbus error free adaptors , i give them try and write here my results
@paulclifford44693 жыл бұрын
@@Damiannott how did you get on? I put h7s in my mk4.5 today and also had canbus error. I've ordered resistors from ebay. U really hope they don't heat up too much and burn the headlight!
@qasimawan96563 жыл бұрын
@@ChazzCoombes I bought mine but however its says "Low beam Dipped Fault" doesnt work after at all. do you have a solution for that thanks
@eddieryan7639 Жыл бұрын
Hi chazz need to replace my low dipped beam i pressume this is the H7 am i correct same car as yours 09 mk4
@ChazzCoombes Жыл бұрын
Hiya Eddie, yeap thats the one. Hit Andy up at HNAsupplies im sure he will be glad to help.
@drewby45633 жыл бұрын
Allow bud what lights are they ???
@billywhizz983 жыл бұрын
The lights look good are you doing a night view of them
@ChazzCoombes3 жыл бұрын
Cheers William, i will be indeed mate.
@dannyford11393 жыл бұрын
Cant wait for the work getting done on the st
@ChazzCoombes3 жыл бұрын
Its coming mate, having to sort out my shed abit for painting.
@dannyford11393 жыл бұрын
Finger crossed we will meet up 1 day at ford fair once I stop working weekends and my st is finished
@ChazzCoombes3 жыл бұрын
@@dannyford1139 likewise mate. Im aiming to get out to shows next year now. Get the ST abit more done and ready.
@Chrismartin882 жыл бұрын
How did you manage tothe covers back on the rear of the lights I’ve got some new led bulbs and the covers no longer fit the fan sticks out way to far
@MrUnemployedjoe2 жыл бұрын
Chaz, where will i find the reversing cable on a mondeo mk4 2007, as im installing reversing sensors, I have grounded but can't find where to put th power cable from my sensor box ?
@christopheladaurade2 жыл бұрын
Hello. I am French and I beg your pardon for my English. Is the little DIY on the H1 headlight bulb necessary? Will it work if I don't.
@fsiebrand2 жыл бұрын
Didn’t you get a light warning on your dash? I’ve got the same h7 led’s and every half a minute I get a bong and warning.
@ChazzCoombes2 жыл бұрын
Nope i get a stop light out sign and then thats it.
@fsiebrand2 жыл бұрын
@@ChazzCoombes okay, I’m going to try some warning cancelers then. And if they don’t work going to 100w halogen, thanks.
@jamesbussey84173 жыл бұрын
Hi there, how are these lasting?
@ChazzCoombes3 жыл бұрын
Hiya James, last and holding up well. The car gets used regular and have had no issues.
@jamesbussey84173 жыл бұрын
@@ChazzCoombes Great to hear. Will prob go for the upgrade next time a bulb goes. Is there a great difference in brightness? Would I have to switch back to normal bulbs for MOT?
@davidriley91942 жыл бұрын
@@ChazzCoombes did it pass the MOT with LEDs in reflectors? I took mine out and put halogens back in when I took mine. just in case.
@ChazzCoombes2 жыл бұрын
@@davidriley9194 hiya yeah it passed fine. I have led in both my mondeos and they both pass fine
@ElfenLied9872 жыл бұрын
Guys, I changed my dips to LEDs, work fine bar an intermittent "low beam bulb fault" on dash. Anything can be done?
@davidriley9194 Жыл бұрын
Put a load resistor. That will trick the car
@wmvideo503 жыл бұрын
at 4.40 the led holder where can i get them Chazz thanks
@ChazzCoombes3 жыл бұрын
Hiya Terry, Andy sends them with the Led replacements.
@antonioPaulino3 жыл бұрын
I have replaced the front indicators on my galaxy mk2 (2013) and had to try a few different brands as I either go hyperflash or CAN bus error messages. Am trying to replace the brake bulbs but have so far not managed to get any that worked, all give me error messages that the bulbs are faulty. Have ordered some Osram resistors to see if those will get rid of the error messages. 1- have you not had any error or warning messages? 2- As you say that the front LEDs are very powerful I wonder what oncoming drivers will make of that? It would be great to see what the difference is between you driving at night with the halogens and then compare it with the LEDs. Also if possible do a pattern compare against a wall to see how the cut-offs compare
@ChazzCoombes3 жыл бұрын
Hiya some good points there. I do have an error message on the dash to let me know there is a bulb out. Was there before i changed them tho when all halogen bulbs was working. And sounds like a good video to make dsy time and night time drive to compair the differance.
@aperezuk3 жыл бұрын
Where can I find this aftermarket clip for the bumper tab?
@jasongiles6983 ай бұрын
Do you live by the coast by any chance?
@coinhunter58632 жыл бұрын
Hello mate great video what make are the h1 please
@drewby45633 жыл бұрын
Hey bud what's the company name of those led lights H1 H7 .. please
@ChazzCoombes3 жыл бұрын
facebook.com/hnasupplies/
@ChazzCoombes3 жыл бұрын
Hope this helps his name is Andy, let him know i sent you over.
@drewby45633 жыл бұрын
No mate I don't need to ask him that's why I'm asking you...
@drewby45632 жыл бұрын
I don't do Facebook bud
@CanterRsps3 жыл бұрын
Very nice !
@ChazzCoombes3 жыл бұрын
Thanks, they make a huge difference mate.
@EoinNaughtonMcLove3 жыл бұрын
Great video and love that handy power tool. Do you have to splice the cable or can you get away with not doing it?
@nikosplatskovits53783 жыл бұрын
Did you had any problem with the canbus?
@ChazzCoombes3 жыл бұрын
Hi Niko, nope no probs. Still working fine.
@harryarora91303 жыл бұрын
Good WORK Mate , Can you send me the link or website where I can buy them I am not based in United Kingdom but ave some friends who will mail it ... Thanks
@ChazzCoombes3 жыл бұрын
Hiya Harry, if your on facebook check out HNAsupplies he aint got a website yet. Thought i put a link in the video, lol
@krisu918 Жыл бұрын
Upgrade for NOT road legal standard. I think it is worth mentioning. Cheers
@carcctv3 жыл бұрын
Not good for the other road users, should be projector lights
@robertpotter25153 жыл бұрын
Know them blue Allen key screws you got holding the grill in? What size did you use? Also will they fit in where the headlight screws are? Just bought a mk4 mondeo and noticed there are screws missing. 🤦♂️ liking these videos too. Keep up the great work!! 😁
@ChazzCoombes3 жыл бұрын
hiya sorry for the delayed in replying but here is the link, hope its what you on about amzn.to/3h3Xk2U
@stevenkiel64522 жыл бұрын
Do you even need the plastic adapters on the mk4/4.5? Couldn't you just remove the locking collar fit into the seat on the back of the unit, then fit the retaining spring over it locking it in place then just twist the LED buld unit in place? That's what I'd do 🙂
@stevenkiel64522 жыл бұрын
Ignore my last comment, I've just changed a set and no the Mondeo has a stupid setup requiring these adapters!
@Dave-qy1fn2 жыл бұрын
Canbus error?????
@ChazzCoombes2 жыл бұрын
Nope nothing all good so far. 😃
@Dave-qy1fn2 жыл бұрын
@@ChazzCoombes fantastic good job , I seriously considering upgrading
@Pheox13373 жыл бұрын
adding leds to classic light is suicide for driver, it look great but its useless, and what about MOT? and what about drivers front of u?
@CanterRsps3 жыл бұрын
Most cars have led now it’s commonplace. You can get ones such as these that will pass an mot it depends on the type of bulb
@ZorgR3 жыл бұрын
@@CanterRsps No, they won't - if the headlights are designed for halogen lightbulbs. What this chap has done in the video is a mot failure right away
@ChazzCoombes3 жыл бұрын
@@ZorgR hi thanks for your comment. I had these leds in both the ST and MK4 and goes threw MOT each time. I have asked the guy who MOTs my car and he said there fine.
@ZorgR3 жыл бұрын
That's all nice but it's a mot failure. You'll have to undo your work (or it will be undone for you) - it's not road legal to stick LEDs into headlamps designed for halogen.
@atilasaruhan_2488 Жыл бұрын
Orjinal tesisatı mahvetti..... Maalesef böyle kaabiliyetsizlerden Türkiye'de de var.