Cheap & Easy DIY Spray Can Shaker || Homemade Spray Paint Can Shaker

#spraypaint #shaker #DIY Never shake spray paint again!!! In this video I show you the best , cheapest and easiest way to shake a spray paint can by converting a commonly used power tool. I convert the reciprocating (sawzall) saw and a clamp into this magical devise. You may have seen other videos out there using a hand drill but this DOES NOT WORK! All it does is rotate the can, it doesn't actually shake it. This spray paint shaker actually SHAKES the can up and down, providing maximum ball movement.
Tools for the build
1. 12" Clamp- amzn.to/31Lz11l
2. Reciprocating saw (cheapest one) - www.harborfreight.com/6-amp-v...
3. Reciprocating saw (the one I use) - amzn.to/3upJNGZ
4. Saw Blades (cheapest) - amzn.to/3fJ6r93
5. Nuts and bolts - You are on your own
Follow me on:
Instagram: @Bmsculptures
bmsculpture...
Facebook Page: @blakemcfarlandsculptures
/ blakemcfarlandsculptures
Website: www.blakemcfarland.com/
----------------------------------------------------------------------------------------------------------------------------------------------------
Keywords: carving, sculpting, artwork, recycled, art, tire, using tires, tire sculpture, tire art, how to, how to sculpt, how to weld, metal, metal working, tig, tig welding, mig, mig welding, welding, welding sculpture, metal sculpture, armature, woodwork, woodworking, unique, unique art, wires, cables, wire art, art ideas, ideas, unusual, unusual idea, creation, creating, building, crafting, builders, handyman, handiwork, sculptor, artist, modern, modern sculpture, how to sculpt, how to carve, how to paint, ethernet cables, environment, green, recycled sculpture, blake, mcfarland, goodyear, goodyear tires, baseball, bluejays, form, human, human form, human sculpture, animal, animal sculpture, make, making, makers central, resin, resin art, pouring, table, work table, working, time lapse, bay area, california, public art, public, welding, braising, attaching, cables, wires, weaving, painting, academy, learning, learning to sculpt, wood, woodworking, amazing, unique, sculpting in blender, sculpting in clay, clay, sculpting for beginners, ideas for art, kids, kids art, woodworking tools, woodworking bench, bench, woodworking ideas, metal working tools, tools, machines, metal working machines, tig welder, mig welder, wood workshop, tips, metal working tips, woodworking tips, sculpting tips, carving tips, how to, how to draw, how to carve, how to sculpt, diy, do it yourself, time-lapse, Axe, Rusty, Restoration, Axe restoration, make money, turning trash into cash, metal restoration, rust, remove rust, removing rust, metal etching, etch, electric etching, electro etch, engraving, metal engraving.

[@AK-ic1yj]

My wife’s never been so happy!! Thank you!

[@Battle_Beard]

On another note: you know a man has confidence in his mounting abilities when he puts a cleaver that size above his door.

[@FasterBastard1]

Feller has more faith in that pegboard than I do my marriage.

[@brianwhite6691]

Not sure why the second blade is necessary considering both the clamp and a single blade are metal, while the sawzall can only accept one blade. Otherwise, I’m going to sacrifice that same HF clamp now. Great video!

[@christinereisig8596]

Holy funk- that’s was unexpectedly hilarious and a genius idea

[@adde32332]

Very clever idea! Thanks for sharing.

[@tatchik77]

Man I needed this video last summer when I was painting my Jeep Hot Pink!

[@carlric]

Great idea, great video! subscribed!

[@douglasfathers4848]

Mate you are a genius I have a saw like that , and now I know what they are used for . Cheers :)

[@BMSculptures]

hahahaha thats great. Let me know how it turns out!

[@mlbbacani]

Funny, simple hack and productive!

[@KatsumotoMoritsugo]

A wonderful adaptation to take advantage of. Another good video ;D

[@BMSculptures]

Glad you enjoyed it!

[@davidseaman9450]

What a hilarious and brilliant video.

[@PledgeAllegianceFlagCompany]

Very nice. Thank you for the idea

[@geberhard]

Great vid! A simpler and cheaper option is a old thicker sawzall blade and one or two large hose clamps around the blade and can.

[@BMSculptures]

Nice! That could work

[@kinghados]

very well done video and great idea cant wait to do this

[@BMSculptures]

Thanks!

[@MichaelStoneRichard]

Cool! The video’s just the right length to shake cans while watching it! My arms are sore, though…I wish there’s something I could build…

[@rosscoghlan]

Ah love this. Great idea.

[@sledzeppelin]

You are a damn genius, sir.

[@Kitopa]

Super silly and funny video, I enjoyed it very much 😂 time to make one! New sub 🎉❤

[@realpdm]

Genius level 9000. Absolutely.

[@BMSculptures]

haha Thanks Phillip!

[@glennmiller9487]

Funnny!! & Ingenious!!

[@njkay0033]

if only one blade is able to be mounted why put two blades on it?

[@76Patilac]

I have the same question, because the 2nd blade does not attach to the tool, but is extra weight.

[@billwolff6582]

@@76Patilac Yep, don't see the need for the 2nd blade

[@frankbrooks3348]

Good job 👏 👍

[@SellYourService]

Literally this is genius.

[@BMSculptures]

haha Thanks!

[@nimishmhatre9419]

this is sooo well done!!!!! 😂😂🤣🤣

[@BMSculptures]

😂😂 Thanks!

[@ZenRacingForza]

I could not agree with you more. Pickles are the devils work. The second worse food is bananas… you killed it my guy. I feel like we could be friends for life. Lol

[@Willy12927]

Don't understand why you need to use two blades when only one will fit into saw. at a time. Wouldn't it be cheaper to use just one blade and maybe a washer on the other side?

[@Donorcyclist]

Appreciate the tutorial, and I'm going to make one of these, but I don't see the point in a blade on each side of the clamp. What is the value?

[@SibeJanKramer]

great idea, but i have the idea my recipro is shaking too fast (i don’t hear the rattling). is that possible?

[@christopherhurray6115]

Hilarious - I love it (both video and shaker)! 😁

[@BMSculptures]

haha Thank you Chris!

[@stevooliver3877]

I did about the same thing..I used a 3/4 aluminum about 6 inches long & attached 2 big hose clamps with a 5/8 heater hose ( better grip) ..so that I can spray the with attachment still together just slide bit back in saw & shake..been doing it for years ..makes a clean coat with consistency( no dark spots)

[@drippingwax]

I watched a video where a guy used an old blade and a hose clamp, but I am trying to find one where a guy attached a PVC pipe off-center to a drill.

[@jshan8205]

​@@drippingwax sixtyfiveford is the guy with the pvc and drill

[@drippingwax]

@@jshan8205 I think that I have both videos open somewhere! Remembering is hard! :D

[@Jnjexplife]

Bravo Zulu 🏆

[@plkmr69]

What bits did you use?

[@craigkovatch7564]

Could I just duct tape around a can to a blade ?

[@norain31]

The best shaker ive seen so far to date .id maybe put a little lock tight on the nuts . and im wondering about perhaps utilizing some pvc pipe and sliding door wheels for a gallon can house paint ?? something to ponder at bed time .ha . And if a blade was to break you can move it over . Also remember "If the women don't find you handsome, they should at least find you handy." good job BM .

[@bluestar.8938]

Thank you : )

[@BMSculptures]

You are welcome!

[@mr.martyr8573]

Graffiti writer of 20 years here.......This is fuckin brilliant. Lol Thank you.

[@joemema7254]

soooooo im about to make an attachment for my wife hehe

[@Kitopa]

The whole intro worth of shaking, and when you go to use the paint it needs another shake 😂😂

[@jaredporter0580]

Make a video on doing a slide

[@bedkeepstrying]

I came here for the paint shaking, stayed for the possible sex machine ideas.

[@PeaceMotherLover]

I was thinking exactly the same thing, I think I saw it in some intro to an HBO show that had a man with a similar idea with a power tool that was like a pleasure pocket.

[@NutsOnYerGrill]

I, too, have a concave bottom.

[@bwright5520]

wish i had your kind of mind,thanks to utub i dont have to ,still wish i did though cool

[@waboom248]

When you drill the holes in the saw blades, USE THE QUICK CLAMP to hold the blades to the drill press table or work bench. The last thing you want is for the blades to spin and ...

[@davidgates1122]

I would like a 12 ounce can of gloss black, shaken, not stirred.

[@PeaceMotherLover]

Lol maybe next time someone asks why my right bicep is bigger I’ll say it’s from shaking paint cans. Got a lot of good jokes, the alone time, tight nuts, and even phallic food like pickles and bananas lol

[@tinomacias9151]

U think 🤔 u can do the gallons ? 🤔 💭 🤔

[@_bigf0ck_]

Subscribed after the tight nuts joke

[@BMSculptures]

😂😂😂😂

[@Day12My]

I usually just put mine in the dryer for a couple minutes

[@Essin62]

@1:06 I was expecting a "Satin? I thought it was gloss. Fvck!"

[@christopherwillson4269]

Why use two blades?

[@BMSculptures]

Just to give it a little more strength. You can easily do this with just 1 blade

[@christopherwillson4269]

@@BMSculptures How does that add strength? I could see if you attached them to the same side, maybe after epoxying them together or something. But on opposite sides?

[@johnjamrowski7505]

My exact question. Why two blades?

[@drmrjon]

AHHH, you still have to hold it genius.

[@fryreartechnology7611]

I hate pickles too!!!

[@BMSculptures]

Just the worst!

[@davidwebster8364]

One blade is all you need the other blade is totally useless it just adds more weight that you don't need. If both blades fit into the sawsall I could see it's use.

[@NickDigger420]

2:54 I see what you did there.

[@WaltRBuck]

Why am I getting shake weight vibes here...

[@BMSculptures]

hahaha, much better than the shake weight

[@jimmydiresta]

Hahahahahahahhaah

[@BMSculptures]

the man, the myth, the legend!

[@josiahhardy]

Hahaha keep the nuts tight!!!

[@azurefoxprince]

Spray cans the original shake weight XD

[@DivinePeace1102]

Well that was certainly dramatic...

[@kristenspencer9751]

hysterical...good belly laughs. wiping tears. I don't think most women are ready to go to that length and may not even have the tool. Just priced an electric one at Lowes for $75 and the battery ones are over $100. Plus you gotta by the battery. But every time I shake a can...I shook cans when I was a kid. We have cars that can drive themselves, but we still have to shake a can!

[@bryanscholtes8548]

I just LOVE waiting over a minute for the whole purpose of the video

[@eddie798]

😂

[@BlueAZ520]

Us both ii hate them nasty green things to 😂😂😂they should be outawedbi

[@BernSha]

Thanks for the idea. I hope you retire with ten intact fingers after years of using them to clamp long, thin, sharp metal pieces to the drill press table with them. I'd guess the points for smartness of the idea against the dumbness of the execution evens out. Youth 🙄

[@gandcwebb3700]

😂😂😂😂😂

[@petemclinc]

Now you can save your wrist and forearm for other jobs...

[@Kroogg]

Bro you straight up stole this idea, from Jared Hildabrant at least give him credit.

[@donnamealy4877]

😂 you have way too much time on your hands. Wonder if it works for martinis as well…

[@BMSculptures]

you better believe it can shake a martini!

[@ryhk3293]

While I can respect the ingenuity, this method requires the materials mentioned in the video, plus a drill (press) and and angle grinder and quite a bit of work to come up with a ultimately a louder and slower method than the drill powered spinning pipe method, which is cheaper, quicker, easier, and more accessible for the average DIYer IMO for a method that is simpler, quieter and faster when mixing. Still, nice creative use for the recip saw I wouldn't have thought of so thumbs up for that.

[@ElegantFinishes]

Haha yes pickles are trash

[@WaltRBuck]

.... doesn't like pickles. It's okay, everyone is entitled to their own tastes and opinions. Unsubscribed *click* Hehe jking )

[@BMSculptures]

hahaha noooo!!!!!

[@pricetag30]

Great videos but really don’t need the sexual implications

[@Pirsinglaff]

Greate video, but thats absolutly unprofitable in Russia, becouse my salary less than 200$. Have to exploit my hamster, less husbund. XD