Check your own engine codes! Motorcycle Diagnostic Scanner OBD2 Adaptor

[@jonatday]

Advisable to always turn the ign off before pulling out the diagnostic plug, as you may do something nasty to the ECU. Thankyou for the tip about the Amazon cables , great videos as always 😊

[@CamelADV]

I’ve never had an issue with it but it definitely falls into “best practices”. :)

[@joshuagoodsell5952]

that is not how ecu’s work at all lol

[@amerikanviking]

Thank you! This is a HUGE LIFESAVER! I didn't even know this cable existed! Update: I have a 202w Yamaha MT 03 NB. The adapter I purchased is a 4-pin connector to 16-pin connector. But. There is always a but. The adapter isn't working. I have tried lots of things. I am about to go to Autozone to see what the issue is. It hasn't damaged anything, but it just won't connect. I had a brilliant idea. Always do. Probably less brilliant than stupid. But, this is what I do. I tinker to try and do things. Always have. So, my idea was to combine things. I purchased an adapter and a Sync-Up drive. The idea is to have a tracker, scanner tool, and wifi Hotspot all in one. It won't connect either. If anyone has any info on what may be the issue or have the correct wiring diagram for the 4-pin to 16-pin adapter. Please let me know. I am going to call Yamaha Monday as well to try and get info from them. But, with proprietary systems. I highly doubt I will get any info. There are no motorcycle shops near me either. So, I won't have luck there.

[@sritter]

Very timely and somewhat reassuring ... I have a malfunction orange light on my KTM 790R ... probably unplugged a sensor during air box removal and clean. Going to KTM to scan it tommorrow morning... 100km away ... I need to buy one of these with Bluetooth dingle. Thanks for sharing

[@gamelogicShortage]

You are my hero sir…thanks a lot and bless you for the links..! Nice vid.

[@Fredricksen390]

Awesome video it helped me a lot. I bougth the adaptor fot my Tracer 900 to erase a code worked like a charm.

[@myname9252]

Who would have known that a regular scanner would read a bikes ecu. I suppose itll say on the scanners manual which manufacturers it covers. Thanks for this ,gonna get that adapter asap.

[@johnsonbar1738]

Awesome vid bro, appreciate the info!! I'll be purchasing one of those adapters.

[@daveyt4802]

These won't work on some older Suzuki's. I think you need a CAN bus capable ECU.

[@patrickdelaney1315]

Thanks for the tip Saves a trip to the dealership

[@AjarnSpencer]

xxxxin' thanks man i have 2 ducatis and soon one more, and I am sick of the Ducati service centers ripping me ff, and and doing it myself, because the maintenance costs of official Ducati service centers is like buying a yacht for 1 million then spend 5 million on fuel marina and maintenance costs.. Ducatis are like Yachts, the money to buy the bike is just the beginning.. the maintenance costs, are the ongoing hole in the pocket!You did us a service showng us this circumvention method and devicce. I am getting one, you sold me on it, as in Thailand no garage has a Ducati compatible scanner

[@charlessykes6927]

Thanks, have bought one for tenere700 and Honda

[@matthewjames4268]

FYI to 22 Teneres and later. Mine is a 6 pin OBD. I assume depending on build year this is the case.

[@4TradeStore]

Hello. Yamaha XT660R Year 2007 has this feature?

[@troubleshooterr5775]

Does an automotive (car) scan tool work for motorcycles too? Examples of obd2 Launch CRP 221 Launch X431 Lemur blue driver

[@Anjjuss]

thanks man. you solved a big question of mine

[@AdventureMotoEnduro]

funny you should pop this video up right now ,my new 2020 street bob did the same today after exhaust install , i fired it up with the o2 sensors not connected ,i cleared 2 codes relating to o2 sensors vr control switches entering diagnostics mode through a process holding in buttons lol damn pain in the ass ,

[@CPerreault]

Would you know where to buy a 4 pin connector obd adapter for Harley Davidson Delphi systems?

[@cihan.kurucu]

Hello bro. Do you know Hyosung gv 250 efi obd2 protocol? Which protocol it is using?

[@stephrace]

THANKS ! Good video. Is it dangerous to use it with the engine running, if it does not work with my key ON, on my snowmobile. Me my lights and my dial does not light up with the key ON. Polaris Switchback Adventure 2012 600.

[@livelymoto2039]

appreciate the tip ordering it now

[@hammy2729]

What is the brand of the OBD2 Scanner, or do you have a link to it?

[@donschlegel1972]

Will this work for a 2021 Honda African twin? I’ve ordered this and I’ve not it’s not worked.

[@jamesdewer]

So a car scanner s it doesn't have to be a motorcycle specific OBD2 scanner or bi-directional scanner. That's huge. If that's the case, you don't really explain that, but hopefully you mean any car OBD2 scanner will work with a motorcycle, although I don't see how

[@TheZakkmylde]

What model scanner is that. Mine doesn’t pick up any codes so must not be compatible

[@robertwestbury4066]

I have a 2021 Kimco 150 cc Super 8 scooter and I cannot find the OBD211 connector. and is it 3 prong or four?

[@ortega181956]

Great info., Thank you

[@charlesbernard3042]

Please direct me on where to purchase such a cable adaptor for a 2009 Suzuki VSTROM DL650. Thanks

[@thetwoextraveryawsomeboys5249]

Do you have a link to that specific obd scanner? Did you have to update it for your specific bike? Can I use any automotive obd2

[@jamesdewer]

Exactly he doesn't explain

[@ricardoblancoberrios2498]

What kind scanner you used??

[@michaelschlup8610]

Hi I'm trying to clear engine check light on ktm rc390 after I installed power commander v with broadband adjustable o2 replacing standard o2 sensor.

[@AntonyStyles-mr5by]

I have a lexmoto tempest 2020 but don't know what cable I need and I don't know where the obd2 port is please can you help

[@MichelJosephCardin]

What I would like to know is what pin goes where as so that I can just plug it by linking it.

[@jacksonmayo6637]

I have the same adapter piece and I’m trying to plug it into a Yamaha Kodiak forwheeler 2017 where would the plug in be located?? I can’t find it

[@CamelADV]

No idea, I'm a bike guy, not an ATV guy!

[@chrisbutcher4497]

Hi mate can I ask what tool it is as my zx12r has the fI light has come on and where can I get that tool cheers mate....Chris

[@dannytapp9422]

What kink of wire is that that you hooked up to the scanner

[@fotisdrosos9158]

Hello, I have an Aprilia Caponord 1200, and can't find any cables in the market. Do you know if the cable from Ducati as mentioned on the description below may work? Thanks

[@CamelADV]

No idea! My Italian bike knowledge is about zero!

[@mackenzieharmon826]

What's the name of that plug I can't find it anywhere lol thanks in advance

[@ronaldbogard3358]

Is there a patch cable that will work on the canam spyder????

[@victordipersia]

do they make a cable for 2020 KTM / Husqvarna...?

[@johnhomles2711]

Brilliant as struggling with a Ktm 1290 fault code rear

[@kevinm5530]

Which adaptor unit did you get for your KTM?I have a 2017 SDGT

[@col1600]

Hi were you able to read your ktm faults. I have a 2017 sdr with mtc failure but is intermittent

[@chupilotv123]

Can i do this on the gsxr 600 07? Erase error codes for sensors in ecu even all my sensor is ok.. can i delete it with this device??

[@kevinbone5848]

Have you by chance used that scanner on the R1200GS in the back ground? Amazon sells a BMW plug also. I have a R1200RT with a anti lock light.

[@CamelADV]

We have not scanned the BWM. I believe it needs a special scanner.

[@aurochandru6191]

Does this work for SUZUKI?

[@bmfilmnut]

Unfortunately, my Triumph Rocket 3 Touring doesn't have the same ODB-2 connector as your bike. Mine is the same as you see in cars but my ODB-2 coded reader can't read the codes. However, I have two apps - one that I haven't used in years and one I've never used and I think they can read codes if I can figure out how to use them. One is Factory Tool that I've used to bleed the ABS and to adjust the throttle bodies but it took a long time to get it to work. The other is TuneECU which I have never used.

[@scooterbutner9674]

FYI....I have a 2009 Triumhp America 900 (865cc) with the OBD2 connector. I have an Actron 9145 scanner and it connects and works really well on the bike. Now I'm trying to find the connector port on my 2014 Honda CTX (D). I'd love to see if my Autel-maxi check MX808 will connect. I want to see if there's any faults in the Double Clutch transmission.

[@vdwbjorn]

In your video you mention that shops will scan your bike for free... in my country they ask 70 euro just for scanning the faults

[@goatsvlogs1455]

Do you have a link for that scanner your using

[@backcountryadvmoto]

Did you by chance try this out in your Honda? I picked a cord off of Amazon a while back and though it said it works with my Honda, it actually didn’t. Could have been my reader I suppose.

[@CamelADV]

I had no idea they existed until a couple weeks ago so I never had one when I had my AT. The first time I used this one, it took several minutes to load properly. Seems quicker now.

[@LuGrainzy]

What was the OBD2 scanner called?

[@jamesdewer]

I know he's so vague. Is it just any car scanner? My cable just arrived tonight but I don't have time to check it. I have several professional grade automotive scanners but I don't have a motorcycle specific one. I'm still trying and vacillating between which one to buy. I have a BMW

[@johngouker3887]

Post the adapter cable id #’s ?

[@XxDiogoxX100]

Hey man, have you tried on the BMW? Can you reset the service light? Cheers!

[@sirmikemurray]

hi mate, do you know where i would find my diagnostic port on my sinnis hero 125 (2018)

[@nicholassmith6983]

Hi I just fitted I piggyback to my Ktm duke 125 year 2019 the it come up ecu failure with the temperature gauge flashing on the dashboard bike will not start I took the piggyback off put the bike back to stock and still the same and same error can you help please

[@skarebsuper]

could you also edit values? change co settings?

[@robsonenduro3316]

no

[@cykablyat8513]

Does it read ABS codes as well with the adapter?

[@car5car5]

Thanks! Super!

[@timramirez4121]

Will this work with Harley Davidson?

[@paolomartini150]

Thanks but does it work on a 2002 model?

[@apiazza63]

Have you found one for the newer KTMs? I know the 990 you could do it but I think the 790/1290 are trickier.

[@CamelADV]

There are KTM cables listed but you'd have to figure out which models it works with.

[@lessmore444]

great info dude, thanks

[@kwakaj14]

thank you

[@robertwestbury4066]

or is it a Bluetooth thing?

[@Peachybundah]

Have a 2008 honda cbr 125 rides for about 30+mins fine then starts to judder down road till I pull over turn it off then will be fine again has the fi light flash anyone know what it could be please

[@julianarodriguez3635]

Can you use this plug on scooter from the Philippines let me know thanks

[@CamelADV]

If your scooter is fuel injected and someone makes a cable for it then, perhaps you can. Scooters are not our market and I know little about them.

[@davem5333]

Was under the impression that each motorcycle manufacturer had its own version. But now realize that that model makes no financial sense. Why would each take on the development expenses? If you fix the problem, the code will clear itself after several cycles.

[@laurencej498]

Don’t you need an OBD specifically for motorcycle 🏍 (software)?

[@CamelADV]

You can get the basic codes with a generic scanner. The dealer units definitely will get more info but this set-up works well for standard stuff.

[@laurencej498]

@@CamelADV I haul bikes for a local dealership I’m trying to improve the quality of my services. There are times when I’m literally picking up trash bikes and hauling them across Texas for a technician 👨‍🔧 to do what I can do during a pickup. Would you recommend a DIY quality or a mechanic level OBD?

[@fxtul7225]

would you pls help test our device?

[@TheRealTorqueMaster]

Hi man, very interesting video! One question: is your OBD able to read other motorcycle brands? If yes, do you know which of them? Thank you so much in advance for your support.

[@MrOldBeaver]

I think you need to know the pinout of the OBD2 plug of yr model and brand. It is supposed to be standard from Euro 5 on, but I have researched that on the net and the pinout differ even between different models of the same brand.

[@JM-yx1lm]

Ya you need the correct pin adapter for each one thats different. Like for Kawasaki I know it takes 6 pin.

[@kirkkimber7886]

You'll be able to read the basics at best. The dealerships pay for a license and for the diag tool that's license locked. Powersports do not work strictly on OBD2 platform like automotive software

[@fairplayer916]

So I've got a 2012 Shadow RS. 4 plug k-line. I have the appropriate adapter. And have tried 3 different OBD2 tools. None can establish a connection protocol. Do you or maybe anyone else here in the comments have any ideas? EDIT: now all I've managed to do is turn the check engine light on.

[@TheZakkmylde]

Any luck ? I have Honda 300 rally and can’t get connection with my scanner as well. Need the right scanner but not sure which one

[@fairplayer916]

@@TheZakkmylde dont have the bike anymore. gave up.

[@michaelschlup8610]

3:29

[@charlesbernard3042]

I guess you never heard of suzuki

[@epa7566]

Finally someone who is not indian

[@3434babyboy]

You forgot Suzuki

[@KHIJAPAN]

Because you know nothing on this you are bullshitting on KZbin. Car OBDii can damage your ECU. Some sensors and fault codes have a different meaning for cars and motorbikes. You have a fault code, because of OEM O2 sensor is unplugged. The issue is the tuning software you use. Most probably is a Woolich. Keep the OEM O2 sensor plugged in, and you will not have this problem. Yamaha Tenere 700 is a fantastic motorbike.

[@flplifemed]

suzuki?

[@ed631941]

PLEASE SLOW DOWN WHEN YOU TALK