Checking for bent Connecting rods Harley Shovel Head

[@JCcanU]

wrist pin puller installer You can make one with a 8 inch 5/16 carriage bolt and 3/4 PVC 4 inch long and 2 washers 1 nut and a 1 inch long 3/4 PVC to install . Just make sure the snap ring is out of both sides .

[@Rapsgarage]

The tool in this video is one that I made. Thank you for watching.

[@JCcanU]

​@@Rapsgarage I watch all kinds of Old school builds . Wrist pin puller tool is what I was telling them . for every day use Jim's tools are best . for a Guy like me I do a lot of home made stuff

[@Rapsgarage]

@@JCcanU i totally agree

[@dho.onthesteel]

Is there a special tool to install wrist pins so you don’t have to knock them in place?

[@josephtizol9695]

Motion Pro makes a wrist pin puller about $50 that you can install with as well. I just did mine last week I put my wrist pins in the freezer for the day and then with oil on the wrist pin and the bushing I was able to just push it in. Are you the guy on the Lane Splitter Blvd videos? Some nice shovels on there

[@Rapsgarage]

This is all I found... www.georges-garage.com/product/wrist-pin-remover-and-installer/

[@Rapsgarage]

That's not me on Lane Splitter but thank you

[@josephtizol9695]

@@Rapsgarage I don’t know how to post a link but this is the part # I bought mine on eBay but Amazon sells them as well Motion Pro 08 - 0472 Deluxe Piston Wrist Pin Tool 13 mm to 24 mm

[@Rapsgarage]

@@josephtizol9695 Thank you