Chevrolet Silverado K&N Cold Air Intake Kit FIPK 5.3L/6.2L 1500 2014-2018 Installation

Freddy shows you how to install a K&N FIPK Cold Air Intake Kit on your 2014-2018 Chevrolet Silverado 1500 with a 5.3L or 6.2L Engine.
Purchase Product Here:
www.cjponypart...
When you're tired of letting your truck breathe through a straw, upgrade your intake to this premium K&N kit that will enhance the overall performance of your 2014, 2015, 2016, 2017, or 2018 Chevrolet Silverado 1500 or GMC Sierra 1500 with a 5.3L or 6.2L Engine.
Check out more Silverado Engine parts from CJ's here:
www.cjponypart...
Check out more K&N parts from CJ's here:
www.cjponypart...
Subscribe to CJ Off-Road on KZbin here:
/ cjoffroad
Follow CJ Off-Road on Instagram here:
/ cjoffroad

[@JB-hs6km]

Just installed mine today, really quick and easy process! Make sure the open end of the air sensor faces the filter when you re-install it! That’s really the only part that takes thinking.

[@mikenice1204]

did you disconnect the battery during installation? I've read it's not entirely necessary and I dont want to lose all the radio presets, etc.

[@JB-hs6km]

@@mikenice1204 I didn’t, everything worked out fine.

[@Shawtylo2012]

This video is very detailed and user friendly! That’s the exact Silverado I have and I plan on changing mines over. I wanted to hear how it would sound but I will when I do it. Thank you!

[@taylorburton9108]

Great video, thank you for making it. I just installed K&N intake on my 2018 Silverado and this video helped make the job easy. Thanks again

[@vinnymase44]

could we get a video of that truck with the K&N CAI and the Borla Atak both installed? i know there’s this video and the other one with just the exhaust but a video with a start-up and accelerations would be awesome. Would definitely be a must watch

[@Kana7782]

Thanks for the step by step video! Your video is more detailed than K&N’s so called “detailed” video

[@fbfl32034]

Great video instruction. I just installed one on my 2015 Sierra, took about 75 minutes, watched the video a couple of times first and read the instructions, they matched up nicely. Only 1-2 surprises, nothing serious. Works great, sounds great.

[@JB-hs6km]

What were the surprises?

[@blood2921]

?????

[@daviddowd2675]

What happens if I don’t unhook my battery? I installed it but can’t start it because my kids are asleep. Looks like the check engine light is on now. Will that go away after a certain amount of miles?

[@phillipjohnson5874]

Mine didn’t come with the MAF sensor adapter. Where can I get one from?

[@HerreraCam]

Naughty boy. Using his chromies with his impact.

[@TheSpecialist54]

just installed one last week. anyone know why it would have a rough idle and shut off? it didn't do that with the stock intake.

[@DavidDeskin]

Will it make it through a code for a bad air flow sensor

[@semiccap]

Great video even years later. I just installed a K&N intake on my 5.3. Unfortunately I broke the plastic pvc hose barbed NPT. which is a dumb design IMO. I was going to complain to K&N but doubt they would care. So I found brass fittings online and ordered them.

[@Tuesflex]

Do you have a link to that?

[@isaackoller6761]

Did the same thing

[@Gearhead-en8dz]

You can pull the whole box in one shot!

[@Kana7782]

Are you positive its legal in California and if so, what model/part number is it?

[@Octavio516]

Since the intake is not entirely enclosed, will it suck in hot air? If so is there anyway i can modify it to seal it completely away from the motor?

[@WBOS72]

GM has always had the most restrictive intake system. You should see some nice gains.

[@jakefeist4643]

This might be a dumb question but I want to do this to my truck but I’m worried about water getting into the intake?

[@Raptor178]

Is this the same k&n part number and process for a 2019 Yukon slt?

[@keithzastrow]

GREAT video. What if (only) replace the factory air filter with a K&N filter? How much more improvement would I get with what you did vs. only replacing the filter itself? I recent bought a 2015 Yukon Denali with the 6.2L engine. Thanks.

[@CJBroncoF150]

Just replacing the filter the help out a tiny amount, but you still have the restrictive intake tube that should be upgraded as well.

[@keithzastrow]

@@CJBroncoF150 Thanks for the reply however I've read a few articles now that state the heat from the engine especially at idle will give you slow starts with the setup you show.

[@nikko3853]

Keith, could you share any of those articles? I have been using CAI's for the last 10+ years and I have never heard anything that you just referenced.

[@wdaniel9888]

My hose barbs would not screw in all the way. Is this normal?

[@gilvertoherrera3285]

Will it fit a 2017 Silverado 5.3 liter? Great video

[@juanbasilio2894]

What would happen if I forget to install the pcv hose

[@Cbones87]

I installed the same kit on a 17 sierra with the 5.3L with AFM and it stalls on a cold start, takes a few attempts to get it going bit once its running it throws a MAF code, I have reset the computer and cleared the code, and same thing happens a few minutes later. I have followed the install instructions to the T and have done CAI installs many times before and this is the first time I have run into this issue... any ideas on what I should do?

[@MrBob2212]

what was the issue? I had a similar issue on an old single cab and I believe the coupling was just loose somewhere

[@rolandos7028]

Mine gave a check engine light

[@ballamelo1215]

Just installed my k&n cai, the check engine light came on, any advice what to check

[@CJBroncoF150]

Go back and make sure everything is connected properly and there are no air leaks. Also pull the code for the light and see what it is.

[@hackervirus56]

I got P0171

[@sinuemedina2550]

Can a put this on a 2018 1500 chevy. Would it mess with. My. Warranty?

[@CJBroncoF150]

It will fit but call your dealership to ask about the warranty.

[@zachbuhlke3481]

Great video

[@antoniozubiate9639]

Those plastic fittings for the PVC hoses are garbage, thats why they don't show the actual installation of those fittings . I expected a little better quality for the money I dished out for this intake.

[@4-matic212]

What are you talking about

[@breezy4176]

My 5.3 threw a code after installing it.

[@hackervirus56]

What did you do to solve it

[@shawnbair]

This is the 5.3 L I think not the 6.2 - the air filter is on the drivers side in the 6.2 engine compartment, still good video however.

[@codyhalpaine7188]

Shawn Bair incorrect sir.

[@codyhalpaine7188]

Have a 6.2 Silverado myself

[@sinuemedina2550]

I tried to buy it. But it's not. Legal in California

[@badquality4069]

Waste of money gain 2 hp

[@chrifaranaudo123]

those pcv hoses slip on the engine so easily im suprised that they dont let air threw