atleast put that motor on a pallet with 2×4s on each side...geeez
@don_dota3 жыл бұрын
😂
@Anarchy-Is-Liberty3 жыл бұрын
ROFLMFAO!!!! Pussy!! HA HA HA!!!!
@Eyoldaith3 жыл бұрын
Was expecting the flywheel to shred something, standing like that.
@INTIMIDATOR1984_2 жыл бұрын
For minute I thought it was gonna go in circles with that flywheel so close to the ground. Good job guys.
@richardbrobeck2384 Жыл бұрын
same here !
@teonthevwwhisperer73163 жыл бұрын
That flywheel is sooooo deadly
@Anarchy-Is-Liberty3 жыл бұрын
Going in a '69 'vette, yet can't afford an engine run stand? ROFLMFAO!!!!
@robertedwards76324 жыл бұрын
I was scared for ya? Get a proper stand for somebody looses a flip flop!! 😆
@will7its2 жыл бұрын
Haha....
@robertcowan82116 жыл бұрын
unbelieveable, stupid runs rampant here
@jonathanolsen72543 жыл бұрын
For such a nice motor and you cant build a nice test stand...
@tardzan19687 жыл бұрын
Flip flops, propped on wood, no stand, spinning flexplate near feet, rocking on the oil pan as you juice it, loose hanging wires. Bad scene man...
@coleslaw1107 жыл бұрын
It'll be fine.
@jimmygrant32126 жыл бұрын
Only if you knew what a flex plate is…
@CoroPlanesLLC5 жыл бұрын
LOL.. I thought the same thing...
@Eyoldaith3 жыл бұрын
Looks like a flywheel to me.
@geodes67223 жыл бұрын
Actually pretty stupid thing to do. Could see that “saw blade” tearing into the foot and cardboard then walking the engine around the garage. Seriously, were you guys even thinking when you tried this
@caboscott29753 жыл бұрын
Are these guys still alive?
@King-qv1pd7 жыл бұрын
What's your cam specs on your corvette 350/350? I'm looking for the factory cam specs or a replacement cam with the same specs as the corvette 350/350. I love your engine and how it sounds. Sooooo goooddddddddd. If you want you can message me on my youtube account. I'm looking to build my 350 like the 350/350 corvette style engine.
@hiteck0017 жыл бұрын
gimme those heads!
@phillipthomas51335 жыл бұрын
Hey dude you can get vortec heads from rock auto.com for 240.00 plus shipping they are better than those factory camel hump heads stop begging for shitty heads😂😂😂😂😂😂😂
@robertswrecks3 жыл бұрын
@@phillipthomas5133 might want them for a numbers matching/period correct build
@lwjw31845 жыл бұрын
You gotta dead hole cuz
@seanoleary19797 жыл бұрын
The flip flop guy wasn't involved. On wood and oil pan - so what? Every junkyard motor I've ever purchased was fired up this way or I wouldn't buy it. Flex plate? - it's called a flywheel, for a manual. Finally, the wires were no where near any problems and would be hanging in basically the same position after being installed in the car. Stop being a jealous player hater and take your BS someplace else!
@proudtobewhite33747 жыл бұрын
seanoleary1979 will always be one or two cocksperts who is going to talk shit haters
@codemang873 жыл бұрын
If the wires weren't an issue then why does the engine mount (guy) grab them and pull them up and out of the way right after they start the engine up?
@Anarchy-Is-Liberty3 жыл бұрын
Sorry, but there would be a bell housing in the way of the wires, but nice try.
@TakeAGuessWhatsNext3 жыл бұрын
To dangerous
@pedrorodriguez30672 жыл бұрын
Congratulaciones from Venezuela
@juanyiste9032 Жыл бұрын
Amigo que aceite usa ese motor soy de Venezuela saludos
@johng52952 жыл бұрын
Thanks in a million. Great content. Awesome imagination. Grade: A++💥
@pedrorodriguez30672 жыл бұрын
Majestic motor and car
@mattprice376644 жыл бұрын
Long tubes at least! I can’t believe there are teeth left on that low boy. But nice build men!
@toddferrell5183 жыл бұрын
Where do I find that overhaul kit , I have a 69 L46 that needs building, info please 🙏
@Anarchy-Is-Liberty3 жыл бұрын
It's called the local machine shop, FFS!!
@dillonwells56493 жыл бұрын
Dumb question but how did you just start that? Picked up a old mud toy with an old 350 has sat for 15 years
@cake82913 жыл бұрын
Its easy. Look up 1 goose on here he shows how to fire up 350s if you haven't already learned
@Anarchy-Is-Liberty3 жыл бұрын
Shoot it!!!
@danielbailey14896 жыл бұрын
I found an abandoned one of these sitting in the woods by us.
@seangangstad95976 жыл бұрын
Daniel Bailey look up the casting #s on google
@bukharyabrashid52394 жыл бұрын
Then sell it to me
@JavierGomez-pt8yt6 жыл бұрын
Qué precio tiene el motor 350 Chevy
@thomasodetinape41806 жыл бұрын
All in one assembly lube in the back round.
@Cheese-hi5ix4 жыл бұрын
1:23 for the start up.
@terrilockhart30757 жыл бұрын
98 gmc sierra
@seangangstad95976 жыл бұрын
Clean build..!
@mikeward29806 жыл бұрын
Man you guy's are bad ass!!
@phillipthomas51335 жыл бұрын
Ha that's the first time I've ever heard of stupidity being called badass😂😂😂😂😂😂😂😂 I mean come on they have this engine on the ground with their feet near a spinning flexplate and hanging wires too come on people buy a fucking engine stand before you and someone else gets hurt😑
@valegutierrez94905 жыл бұрын
CUAL ES LA PRESION DE ACEITE ADECUADA?
@pumaxr74 жыл бұрын
6 psi
@AlexA-fz9kr7 жыл бұрын
Is this with the harmonic balancer on ?
@proudtobewhite33747 жыл бұрын
Alex A clutch plate and flywheel in one
@vertonmccaulou52 жыл бұрын
Has to be to keep the oil in
@douglascorley58875 жыл бұрын
The best Tunes engines got one time to do
@lwjw31845 жыл бұрын
???
@Anarchy-Is-Liberty3 жыл бұрын
English son, ENGLISH!!!
@rosendorivas99568 жыл бұрын
que # de árbol tiene?
@harris15078 жыл бұрын
No sé lo que quiere decir
@rosendorivas99568 жыл бұрын
Q tipo de árbol de levas tiene? Q graduación 270; 272. Etc.