Chevy Colorado Passlock Security Fix

[@williamarias444]

Thanks for posting this video I just replaced the sensor in my 08 chevrolet colorado four months ago, I did the relearn sequence 4 or 5 times but it did works very well,so far I haven't had any problems, you really helped me

[@chemicallyfreenolye5462]

It actually talks about it in the owners manual, that’s how I found what the issue was, I may invest in a new ignition switch. I wish the Manufacturer would pay for the switch or a perm fix.... these trucks should be recalled.

[@grahamshatter6625]

Damn right.

[@chemicallyfreenolye5462]

That was the ignition issue, this is not the ignition it’s a security pass lock issue.

[@Machowoman21]

Report the issue to the NHTSA! If they get enough of the same complaints, they'll force GM to recall! 1-888-327-4236

[@chemicallyfreenolye5462]

@@Machowoman21 I dont think it will help, it is in the owners manual, GM will point that out to not be held accountable for the repairs, my 2007 just sits in my driveway… i don’t even want to sell it for fear of having to explain this to a potential new owner.

[@darkhunter5594]

@@chemicallyfreenolye5462 is the frame good?

[@pfchutchison2343]

Thanks bro I bought a ignition switch last night and I haven’t had no problems since then and I will keep every one updated.

[@niclabeaux1143]

It’s still running good?

[@nickolasblank9265]

Thank you so much! I'm not sure if I was doing it wrong, but it took me 5 or 6 times before it worked instead of 3 after I replaced the switch. Whatever the case, now it's working great!

[@cindymartin6665]

This needs to be a class action suit. I was stuck for 3 hours today. We cut the blue and white wire 2 years ago it worked fine until I had my gas line replaced then the issue is back with a vengeance.

[@averageautomotiveenthusias9555]

I totally agree. This issue should definently be a recall

[@joejjl]

I wouldn't even need any money. I would be satisfied if they would just assemble all the engineers together who designed this system, and make them read a Twitter feed from us to them for 8 hours straight. They really need to understand what dumbasses they are, and then never design anything again.

[@wesmiller1310]

Cindy, I know this is an older post, but thought you and others might find my experience useful. I too have cut the white and blue wire, and it worked perfectly for years. But, I put butt connectors on each end of the white and blue wire, so that I could reconnect them easily should I ever need to. When my alternator had to be replaced, the mechanic cleared all codes with his scan tool, and my truck would no longer start. I am guessing your mechanic did the same thing when he replaced the gas line. At any rate, all I had to do was reconnect the white and blue wire, start the truck (it started on the first try after reconnecting the white and blue wire), and while it was running, I just disconnected the white and blue wire again, and it has worked perfectly ever since. Hope this info helps!

[@Machowoman21]

Report the issue to the NHTSA! If they get enough complaints, they will force GM to recall the parts! 1-888-327-4236

[@KevintheTerrible]

@@Machowoman21 I'm pretty sure that I reported it to NHTSA a few years back because my truck died on my twice while I was driving. I have been trying to fix this problem yet again.

[@cread80dsflkdsh]

That thing tried to leave me stranded at the store, at work, at my house, and in the middle of the road. Passlock flashing cutting off in the middle of the road and stuff. The new ones come with a steering wheel lock. I never noticed they didn't have a lock until then. It's the newest vehicle I've ever owned that didn't come with one.

[@aarontyrrell2931]

After having issues with my 09 Colorado, I took passlock sensor out of my column to clean it with electronics cleaner and noticed the screws holding it with lock washers were not very tight. Cleaned plug and terminals and reinstalled and made sure screws were tight. Seems to be more solid feeling while starting with no lag. Have had no issue with security lock out since. Knock on wood hope this fixes it without having to buy a new part that should be a recall.

[@GCHUSTLEHAWAII]

Any problems since you tighten them?

[@aarontyrrell2931]

@@GCHUSTLEHAWAII no problems! I havent even been doubting the starting like i used to. Just feels more solid turning the key

[@josephd.3247]

Did you have to make the sensor re learn the key or you were good after just taking it out cleaning it up and plugging it back in

[@aarontyrrell2931]

Finally have been having an issue again about a year after I have done this. May be time to checked the screws again and see if they are loosing up. I did not have to relearn the key after unplugging it

[@ice9945]

Great video. Mine doesn't start at all Pass lock is on.ty for the figuring it out. IAM going to take mine apart & change it. Truck was running just fine and left me stranded at the market a few miles away.bewn sitting in the garage even since. Thank you keep you posted

[@rosasjv76]

Thank you for posting this video I was getting ready to replace the hole housing instead just did what you did I'm in the process of removing learning The switch hopefully it works Thank you

[@averageautomotiveenthusias9555]

My pleasure, so happy I could help you 👍

[@on1t]

Thanks for posting this video!!! My dad was having the same issue with his 06 Colorado that he had just purchased about a year ago. So yeah..., there wasn’t a warranty and the problem seemed like it was getting worse. Like you I did some googling and YouTubing..., thankfully I found your vid!!! It’s been about a week since we replaced the switch and the truck has been starting just fine. Will update this post if the problem occurs again (01-24-20)

[@averageautomotiveenthusias9555]

My pleasure, glad I could help. That's awesome man! Yes definitely update on how his truck is running

[@swissarmywife2039]

How's the truck doing now,?

[@on1t]

Seems like this fix lasts about a year and then you’ll have to do it again…, at least this has been the case with my dads truck. Going to have to repeat the process today. I didn’t get the part from a pic and pull…, so maybe that’s the difference between a new aftermarket part that I’m getting🤷‍♂️. But it does work

[@brvndon.47]

@@on1t My truck is doing this as well, any luck with the aftermarket sensor?

[@on1t]

@@brvndon.47 It’ll work for a while and is a relatively easy fix…, hopefully you only have to do it once. As for my dads truck I’ve done it more than a few times. Id suggest trying a sensor from a pick and pull

[@lukeb2068]

For the win!! Exactly what I needed!

[@ice9945]

I changed my pass lock switch. It fixed my problem. Thank you.

[@pjr7505]

On my 05 Chevy Colorado I followed the steps on the video and it worked for a while only. Finally the engine would crank but not start. So I had to pay a towing service to take it to a auto shop. The first auto shop wanted to burn the vehicle computer. So I had to call the towing service to deliver it to another auto shop. The tech was able to reset the vehicle computer and the truck starts up fine. $166.40 towing ,$240 to reset the vehicle computer. Lots of frustration.

[@GCHUSTLEHAWAII]

It didn’t start even after waiting for about 10 mins? The passlock security sensor should hav stoppped blinking

[@humlocker]

I have a 2016 colorado truck own it since about 3 years I start to have this issue it would not start, i took it to dealership but they were clueless what is the problem, what they did was reposition the fuel box and fix it, a year later the issue is back to where it cranks but wont start the engine. After watching this video maybe this could be the problem the only thing is my dashboard does not indicted any lights for anti theft icon. How do I find out if my 2016 colorado truck has this anti theft sensor? Im tire of dealing with this to long and spend thousands of dollars with this colorado truck. Im done buying American trucks if you have to pay out of pocket huge repairs and not even that old with mileage under 110k

[@eugenewhipple2562]

if that doesnt fix it there is a switch next to brake light switch closest to the door its connected to the passlock system i own an 05 n got same problem till i changed that switch

[@mikeb5607]

He went to a Junk Yard (U-Pull) .... how did he get the sensor out without a key to turn the lock cylinder in the truck at the yard? And the key / cylinder should be in the ACC or On position to release the black sensor out of the housing??

[@irbycrulee9020]

looking for the same answer?????

[@mikeb5607]

@@irbycrulee9020 I had this issue on my 09 GMC Canyon ... I ended up just replacing that black switch / sensor only. It has resolved my issue (knock on wood). Its been a few months ago since I changed it. You do need to turn the key to the On position to release that sensor and to reinstall it. I disconnected the Battery before doing this. Reconnected the Battery and went thru the manual relearn process. The hardest part was getting the column covers off.

[@HandyDan]

Hello, I was wondering about this passlock light on my dash. My truck is odd, this light randomly comes on while driving, but nothing happens. I never have trouble starting it. 2007 Colorado LT

[@irbycrulee9020]

how do you pull one in the u-pull it junk yard with out a key for the junker that you are getting the module from?????

[@kanewaikiki6071]

Hi, I had a question so when you change the ignition module the black piece in the back, do you need to turn on the car while you disconnect it?

[@glennflake5732]

I bought the whole part new, including the lock. Before I unscrew the two screws and remove the black plastic part from the cylinder metal are there any springs other parts gonna fall off in my hand or is that a clean removal? Thanks for this great video, and I pray, the plastic part fixes it and I don’t have to remove the whole steering wheel and cylinder and Lock , etc.🙏 just came in the mail from Amazon for 90 bucks so I plan on removing the two screws and R&R plastic part only. Txs for answer.

[@AOREM76]

Replaced the sensor today, i did have to do the relearn sequence 3 times.. i was very skeptical, but it did work! Thank you for the video.. very informative!

[@kens1955]

Does the sensor come off easily once the 2 screws are removed? The new full housing with the new sensor feels like there is some tension holding it in. I don't want to break the new part.

[@douglaslovo7624]

Can do you tell me the name of the piece please, i got this problem right now, is so stressful

[@clownz313]

@@kens1955 did you figure how to remove the new sensor off the housing?

[@Zemu8]

@@clownz313 I just kind of had to get rough with mine on the new housing when it come in the mail….. there’s also a black button down inside I pressed that down turned the sensor and it popped out

[@ubettafishitup]

I have an 07 Colorado. Last time this happened to me two days in a row staring it first thing in the morning after driving 20 minutes and stopping. But my truck went into a power reduced mode. It went away after pulling the battery cable.

[@ivanarau2073]

Your problem is the throttle body sensor

[@risainfinita5793]

And when I try start it it does not start and you can hear a noise like it slides

[@paultodd4543]

Thank you I just wanted to tell you to help me out so much. I didn’t think it would work but it work thanks a lot I really appreciate it.

[@Derek-uv1nt]

I replaced mine today, ive done the re learn 4 or more times now wont start at all. Put the old one in it will start for a few times then lock again. Cant get the new one to re learn. Anh ideas?

[@angelaflores7259]

How long did this fix work for you before it starts again?

[@mauriciog8590]

On my truck I notice that it would do that only when the battery is getting low ready for a new one

[@craigslistebaystuff]

Well, I followed the steps right up to relearning the key however it started right up on the first try..... is that bad? 2009 colorado

[@sonicrunner-fm8oq]

I got the switch with the housing - removing the switch is not easy - is that normal? I don’t want to break it

[@billrobbins7773]

Changed the sensor, did the relearn thing and nothing! Put the old sensor back in - starts fine. What is going on?

[@normajean5975]

I just got a 2011 chevy colorado and the carlock symbol came on. It would not turn over or crank up, only the radio and the air comes on. It will start up after about ten mins. It happens randomly I need to figure this problem out.

[@jon112785]

Very easy fix. www.coloradofans.com/threads/how-to-permanently-disable-the-passlock-ii-system.142238/

[@normajean5975]

@@jon112785 I was told that if I cut any wires on the 2011 chevy colorado then it will just shut it down and would not be able to start it.

[@jon112785]

@@normajean5975 Who told you that? Did you take a look at the link I sent you? The first generation Colorado trucks cover 2004-2012 so wiring should be the same for the most part. If you view the "How to" and you can find the wire in your truck and it all looks the same as the "how to" you should be good to go. Just make sure the truck is running when you cut (this is not a remedy if the truck is currently not starting, only as a preventative measure for the future) If you are having reservations about it, worst case scenario: you follow the "how to" and cut the specific wire and you still cannot start it? Just disconnect the battery and reconnect the wire you cut and its like it never happened. There are other ways to fix the pass lock issue. They just cost money. You can install a bypass device or have someone with an HPTuner disable it by reprogramming the vehicle's computer. My truck is a 2006 and I had this issue. I researched the problem, found out I could cut this wire, and the truck has started with no issue since for over 8 years now.

[@normajean5975]

@@jon112785 dang, they probably told me that to get more money it was a mechanic that works at the dealership I bought the truck from told me that. I had to pay 500 for a new ignition cylinder.

[@jon112785]

@@normajean5975🤦‍♂️ oh no! Ya if the flashing lock light flashes after you start your engine and its cranking but won't start is the pass lock issue. New ignition cylinder isn't going to do anything. Ive dealt with the most scammy dealerships and will never ever take any car I own there unless its under warranty. You should honestly cut the wire. And now that I remember, I had an unrelated issue with my PCM (on board computer) that i had to replace. I ended up reconnecting the wire I cut years back because I wasn't sure if a new computer would affect it. Sure enough the problem came back and wouldn't start. So as soon as I waited the 15 minutes and it started up, i disconnected the wire again and everything is all good. Long story short if you cut the correct wire that is described it won't permanently disable your vehicle or anything like that.

[@risainfinita5793]

Hii my chevy colorado 2005 shut off I was on my way when suddenly it shut off and said in the dash low fuel but it has gas and it has because the dash showed it has

[@macsteezywayz4603]

Can you just buy the whole ignition switch with them sensor and just replace the sensor instead of replacing the whole thing like in the video you linked?

[@averageautomotiveenthusias9555]

Most new ones are sold with the whole key cylinder and switch attached to it. Replacing the whole thing is alot more work as you saw in the linked video. What I did was undid the plastic under the steering column and that exposed the switch to the left. To take the switch off you just unscrew the two screws, the key has to be in the "ON" position or maybe "accessory" I cant remember, once in that position the switch will come right off. Then you put everything back together and complete the relear and you're golden. Any more questions feel free to ask 👍

[@daniloalbi8673]

Ok so is just enough to replace the switch..???!!!. I’m not an expert but I have a 2008 Chevy Colorado with the same starting problem it does almost every day and every time I have to wait 10 minutes before I can start the truck ... it is a security issue in the ignition.. but not recall at all ... it’s very very frustrating... hope I can solve the problem because after all I like my truck , and almost payed off... God bless

[@aventurasenelsalvador1750]

Hey, did you find anything leading to a failure inside the switch?

[@kennethhayes3763]

You do get housing and all with a new one but you can take the switch part off the new housing and just use it. I've put a lot of 'em in but never have used the entire housing, just the switch. There are common problems, which is why I wouldn't trust a used one.

[@jfmmccoll9189]

Do you have to do this with both keys.

[@dakotapennington2840]

I have an 07 Colorado that started doing this. Sometimes it will start and die and then I have to wait a little bit and it will start back and run fine. Sometimes it won’t start at all. Curious how yours was acting.

[@a.p.980]

seemingly at random. like a 50% chance that it will start. if not I have to wait 10 minutes.

[@edgarramirez8731]

Do you have an aftermarket alarm?

[@averageautomotiveenthusias9555]

No, factory alarm system

[@bustedaimbotgaming1763]

Unfortunately this isn’t helping with my 2007. Seems like the only thing that works is just waiting for 10 minutes just excepting defeat walking away and coming back 10 minutes later it 99% of the time will start again but unfortunately the reset code isn’t working for me

[@Leon-qc7fe]

OK-I have not tried this but I thought I would make a suggestion. That switch looks similar to the rotary switches I have repaired on several different kinds of electronic equipment. I would use a spray can of contact or tuner cleaner with a plastic straw on the nozzle. Get the end of the straw into the switch by prying the case open then spray the inside of the switch and rotate the ignition switch back and fourth several times to work the cleaner into the contacts. I have repaired/cleaned the contacts of many switches that way-It is worth a try-If someone does that and it works please post your result. GOOD LUCK!

[@AllStarBallers1]

Hey so I replaced the sensor with one off a new ignition switch, when I to to try and start it the first time it starts then dies, not crank. Then the pass lock light blinks for a few seconds and then stays solid and never goes off after the 10 minutes. Any idea where I’m going wrong ???

[@averageautomotiveenthusias9555]

Are you sure you have a bad ignition switch? Try disconnecting the battery for a minute or so and start the relearn process over again. Refer to the video I have linked in the description, towards the end of the video is the relearn procedure. Hope this helped, good luck 👍

[@rockofallalphapleasure4349]

I'm having the same issue. Mines seems to do it more often when I use my remote starter. I'll appreciate your input

[@averageautomotiveenthusias9555]

@@rockofallalphapleasure4349 Weird, I would think the remote starter would bypass the ignition switch. Is it throwing any codes?

[@redneckgames9357]

Mine won't even crank over but light is on

[@belongs_2_the_grave]

101K on my 04 Colorado. A few moments ago I vame out of the gas station, and truck didnt fire up. Noticed my pass lock was flashing😑. Had my BCM replaced about a year and a half ago. Probably put MAYBE 1500 miles on it if that since the BCM replacement

[@belongs_2_the_grave]

Going to mess with it tomorrow afternoon when I get off work ugh. Good times🤣

[@JamesAmos-jv4hl]

Is this still working for you

[@ricksatterfield4596]

I have a 2005 Chevy Colorado broadcast my anti theft kicks on then it won't start won't do nothing Pull the ground cable and then wait for about 45 minutes to an hour then it will start then everything was shut back down and stay running but that's how theft light kicks back on again But this last time it did it it would not go into gear

[@Krash837]

Is the switch the actual computer for the passlock system?

[@javiermedina1812]

Bro just the right video for this fix thanks 🙏🏽🔥💯💯

[@jesusalba1989]

it's 2021 did it fix the problem long term?

[@averageautomotiveenthusias9555]

Yeah, zero issues once I swapped out the switch 👍

[@abrahammora2104]

When you do the 10 minute procedure to reset the key, do you crank all the way each time or just set the key to on?

[@averageautomotiveenthusias9555]

Crank it all the way and then leave the key in the run position, the antitheft light will stop flashing then you repeat it. Click the link I have in the description, it's of a guy replacing his switch and doing the relearn process, that's what I followed and it worked for me. The relearn starts around 30:50. Hope this helped you out, any more questions you have dont be afraid to ask 👍

[@abrahammora2104]

Worked. Definitely need to crank all the way each time. Thanks!

[@averageautomotiveenthusias9555]

@@abrahammora2104 My pleasure, and other questions feel free to ask 👍

[@ritawthomas8898]

So mine starts but won’t move out of park, passlock light stays on solid. Do you think it’s the same problem?

[@averageautomotiveenthusias9555]

I dont think so. The purpose of the passlock system is an antitheft device that cuts off fuel if the switch doesn't recognize the key, so if your truck starts its not the same issue i was having. This being said the switch could be faulty in a different way if it is staying solid while the truck is idling or it could be the switch is starting to fail. It not moving out of park is odd. Try undoing the positive and negative terminal on the battery for about 10 mins, i think that should be enough time to reset the ECU. See if it runs normal after that. If the light comes back on then its a legitimate reoccurring problem. I'd then take it to a shop for a diagnosis

[@sv4954]

Thank you for doing this video.

[@hotrod-yf9oq]

IAM having the same issue on my 05 Chevy ever once a while it want start I only have 13,000 miles on it so yea have a new motor so yes I parked it cause IAM up set with the pace of shit

[@luismosqueda8847]

Thank you for the video I'm having the same problem for years I just replace my as well hope the fix it will see thank you again

[@averageautomotiveenthusias9555]

My pleasure, glad I could help. Thanks for watching 👍👍

[@Voice4orNoise]

Awesome video. I'm having these issues got time to talk about it?

[@averageautomotiveenthusias9555]

Thanks man. Yeah i got some time I'll try and help you out as much as I can

[@UndrRatedEnt]

I had been postponing this repair for awhile, i researched it awhile ago and like an idiot i am waited for it to not start one day before i decided to replace it so i watched your video, replaced the switch reprogrammed the key and i still get a solid security light 80% of the time i drive, wondering if you or anyone else has had the same issue? I just replaced the sensor, thinking about replacing the housing and key cylinder.

[@daniloalbi8673]

Hi I just read ur comment... I have a 2008 Colorado and I have starting problems almost every day my truck doesn’t start at the first turning of key and I have to wait ten minutes before it gets started sometimes it take also 20 minutes... very very frustrating . I found this video today and wondering if can solve the problem replacing the ignition switch!!?? I’m not veri practical with car but I can try ... do you find the switch at any kind of body shops ?!! Would appreciate any tips to solve the problem really.. 🙏

[@UndrRatedEnt]

@@daniloalbi8673 Yes replacing the switch will most likely solve your problem but the light will probably come back every now and then. I have been driving the truck for a couple months now and it always starts since I have replaced it, but I did end up replacing my ignition lock cylinder as well with new keys but nothing has changed so I would just go with the switch

[@daniloalbi8673]

Thanks very much I’ll try.... hope I find easy to replace by myself because I don’t trust ask mechanic or dealership so far because they try to take too much money

[@UndrRatedEnt]

@@daniloalbi8673 good luck my friend you can always call a mechanic and they can give you recommendations for free. Just a thought

[@daniloalbi8673]

Thanks to you my friend I’ll let you know the results.. take care and God bless you

[@domingotrevino6797]

Have you had anymore problems with since you replace that part?

[@averageautomotiveenthusias9555]

No, no issues. Shes running like a champ 👍

[@jon112785]

You dont need to buy a part you can fix it for 0$. Hope this helps. www.coloradofans.com/threads/how-to-permanently-disable-the-passlock-ii-system.142238/

[@rocastyle86]

It’s the pass lock sensor plug and play

[@averageautomotiveenthusias9555]

I believe any switch from 2004-2012 Canyon or Colorado will work, and I'm pretty sure the relearn procedure is the same. Its plug and play once the key cylinder is off of the switch , if you're pulling it off a truck at a scrap yard the only way to remove the switch is to have the key in the on position and this will alow the switch to slide off the cylinder and then it can be removed and put on another vehical. Once the switch is on your truck it has to be relearned

[@Kameronwest1991]

What year is your truck

[@jesusefrainledesma5446]

La mía esta así no la puedo arrancar ya intente eso y no da marcha no se que hacer

[@JorgeGonzalez-vm9mn]

How do I get that sensor?

[@franckypena6451]

What is the name of the parte sr please let know

[@togiebear444]

I think my truck is having this problem, my truck won't start and some kind of security sensor light has came on. Ugh. I love my lil truck it's cute but this is frustrating esp when you're a woman and don't know anything about mechanics, luckily my uncle is going to help me.

[@jon112785]

Check out this how to on how to fix. You would be able to do this yourself. Good luck! Let me know if you have questions. www.coloradofans.com/threads/how-to-permanently-disable-the-passlock-ii-system.142238/

[@alexisortiz3452]

what is the number or name of the sensor please.freddy thanks

[@gammawave5425]

How did you take the part off? It’s stuck

[@averageautomotiveenthusias9555]

You have to put the key in and turn it to accessory I think it is, then the switch will come out

[@Goodsxp]

GM is no friend to its customers !

[@rikwescoupe7868]

Long story short is probably a phrase that you never heard of… get to the point already lol😅

[@domingotrevino6797]

Did it fix the problem????

[@averageautomotiveenthusias9555]

Yes 100%, never had an issue since I installed a used/new switch

[@domingotrevino6797]

Awesome!!!! Thanks for sharing.

[@averageautomotiveenthusias9555]

@@domingotrevino6797 My pleasure, thanks for watching 👍

[@kingcanadahi11]

lets be clear, did this Chevy come from Colorado?

[@averageautomotiveenthusias9555]

Alabama actually

[@imaginethat6356]

I have this EXACT same issue, but I have a 2006. It is literally at the most random times that it won't start, then I have to wait 10 minutes to start it. I'm going to also have to replace the POS radio they put in here. If anyone knows if i actually need the chime box or if it will mess with the passlock system please let me know. I'm glad you figured this out man!

[@averageautomotiveenthusias9555]

@@imaginethat6356 Yeah if you have to wait 10 mins before it starts it's the passlock 2 antitheft system. Get a used or new one and install it your self to save a alot of money. Thankfully, I haven't had any issues starting the truck since I replaced the switch. As far as the issues you're having with the radio I'm unsure, I wish I could help. Hopefully someone else can answer, thanks for watching 👍

[@headboil]

Nailed it

[@pfchutchison2343]

Do you have any idea how to fix a problem with the cruise control not working

[@joseortega1114]

There's no way to just turn it completely off I hate that anti-theift crap yes I've already switched out my ignition switch

[@ablelawrence5750]

Thanks a lot bud. I will let you know how it goes? Got a lead on a scrap yard for Saturday. Thanks eh

[@averageautomotiveenthusias9555]

No problem man, glad I could help. Awesome, yeah definitely let me know how it goes 👍

[@ablelawrence5750]

@@averageautomotiveenthusias9555 hey bud. I changed the switch and relearned the key and it didn't make anything worse lol I still had problem but it isnt passlock/ign switch related. I have power from pcm on my relay but no full time power on relay. I am waiting on a friend for pin connection diagram on the plugs of the fuse box. Take care

[@UndrRatedEnt]

@@ablelawrence5750 Did you end up finding out what the issue was?

[@ablelawrence5750]

@@UndrRatedEnt thanks for asking . The main problem in diagnosing was me. It was a bad fuel pump . Found a good used gm pump and put it in. Thanks again, appreciate that

[@MrSweatybuns]

How do I remove the bottom cover?

[@josephortiz7726]

Thanks for video

[@averageautomotiveenthusias9555]

My pleasure, glad it helped 👍

[@mrmark6690]

Great video but you forgot to include two important things one is those three security bolts that are T25 that hold the plastic cover for the steering column, you have to pop the bigger plastic piece Beneath the steering wheel but the most important thing when just replacing the sensor is when you buy a new lock cylinder you need the key to remove just the sensor so if you’re just replacing the sensor you have to remove your original key ignition cylinder from the lock cylinder housing to put into the new cylinder housing to remove the new sensor.. to do that there’s a little guide hole with the key on ACC only you push the metal circle in to remove ignition cylinder.. I do not believe you can pry the new sensor out of the housing without damaging it .. the link to the long video shows you how to remove ignition cylinder

[@t_mtb4671]

That’s if he had his own tv show and was getting paid. I was able to figure it out with this video

[@hunterhousewright6839]

You can remove the sensor without the housing on the truck, all you have to do is stick something down in the lock cylinder hole and turn it, I used a pair of needle nose pliers and it worked easy

[@jackreynolds1880]

I’m now getting a solid pass lock light. Truck starts and then dies 1 second later

[@theofficialstv]

How much did this cost you

[@rexnhogz]

cut the purple wire works best and costs nuthing

[@tomsoyer3607]

Where is the purple wire ?

[@rexnhogz]

@@tomsoyer3607 under the steering column theres write ups about it on 355nation

[@jon112785]

@@tomsoyer3607 Its not a purple wire. Its blue and white. www.coloradofans.com/threads/how-to-permanently-disable-the-passlock-ii-system.142238/

[@dylonbaer985]

Any updates??

[@averageautomotiveenthusias9555]

No issues at all once I replaced the switch 👍

[@michaelshultz7502]

Couldn't say it better than at 7.08

[@theshop5331]

Nice explanation but damn, all I see is a steering wheel!

[@xJayPlayz]

looool same 😂

[@davidmercado6947]

Colorado an Canyons most infamous truck on EU worst deplorable electronic engineering on truck market

[@lmontague8665]

Less f****** yappen and more f****** fixing

[@Heavyhearted44]

3 minutes video was 8 minutes video

[@nickboutin857]

9 second fix found here……… kzbin.info/www/bejne/iIOzpJSpp7-AkKM

[@Heavyhearted44]

To much talking

[@hayguey7952]

Talk to much.get too the point

[@allisonartiles5668]

A little too detailed bro