Chevy Malibu/Impala "P0011 / P0013" Code - Camshaft Solenoid - EASY FIX

[@Supercell725]

Thanks Michael, watched your video and fixed my wife’s blue 2013 Malibu, it was acting up and died on her. She told me she was going to set it on fire.

[@DIYwithMichaelBorders]

You are welcome, and great to hear the car is back up and running…and not on fire. 😁👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰

[@dp58287]

This is by far the best video for this job. After watching 3 or 4 other videos I finally checked this one out. Wish I had just watched this one first. Concise editing. Step by step from top to bottom. Thanks for putting this out there...saved me time and money!

[@DIYwithMichaelBorders]

Dakota Philbrick Awesome Awesome & we love reading comments like yours. This is why we do this. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 We are happy to hear you found the video beneficial. Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@fmly4him]

Fantastic! This saved me hundreds of $$$ ... I bought the part today ... just finished putting in the exhaust solenoid. It literally took me less than 15 minutes! Thanks for the great video!!

[@DIYwithMichaelBorders]

David Peake Awesome Awesome & thanks for watching & sharing your experience. We really appreciate it & are happy to hear the video helped. 😎👍🔧🔩

[@Teslacoilette]

Thank you! This video make it super simple to remove this code! Once the clip is unlocked, use long nose pliers to gently press down on the end of the clip and pull them out. For the back solenoid, we removed the air handling hose just above it to make it a bit easier. Overall, saved me hundreds! Thanks again!

[@DIYwithMichaelBorders]

George Birch Thanks for watching & we are happy to hear the video helped. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again George. 😎👍🔧🔩

[@5150on420]

Nice video, Wish there was more women in this world like you.

[@DIYwithMichaelBorders]

5150on420 Thanks for watching 5150on420! We are glad you liked the video. This is a pretty user friendly project and definitely won’t hurt the bank account 😊. We had fun doing this repair. After this part set off our check engine light...it tripped off our remote starter feature due to safety purposes...we had to fix this ASAP as we are getting into the cold season 😱. Thanks again for checking out the video. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍

[@gnovincejr2]

What does this mean about your remote starter feature? What happened and what did you have to do?@@DIYwithMichaelBorders

[@DIYwithMichaelBorders]

gnovincejr2 Thanks for watching, great question! Since our Solenoid failed & sent error code to the onboard computer, it then illuminated the Check Engine Light. At this point, the illuminated Check Engine Light deactivates our onboard remote starter...Bummer. In order to get our remote starter to work again, we needed to replace Solenoid. After replacing the solenoid and starting the engine, The new solenoid sent an electrical communication link to the onboard computer which allowed the onboard computer to recognize the new solenoid...which then allowed the onboard computer to turn off the check engine light. At this point the remote starter was now reactivated for normal use. We hope this helps. Below is a link to video explaining more. kzbin.info/www/bejne/nouslH6Khbh8hqM Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@gnovincejr2]

Thanks so much!! Amazing response time by the way. Haha Good stuff! You're AWESOME! @@DIYwithMichaelBorders

[@DIYwithMichaelBorders]

gnovincejr2 We hope the video & info was helpful! 😎👍🔧🔩 Thanks again for watching!

[@JJL92]

Great video had to change my exhaust solenoid. P0013 problem was fixed. No more check engine . Total cost $38 got ac Delco part on Amazon. Thanks for sharing 👍.

[@DIYwithMichaelBorders]

Thanks for watching & that’s great news. $38.00 is a very friendly price. Welcome to the DIY Raptor Club. Let us know if you have any questions, us fellow DIY’ers need to stick together. Enjoy your day. 😎👍🔧🔩

[@naturallydee1835]

Oh my gosh thank you for posting!! I had no idea it was such an easy fix, saved so much money thanks!!!!

[@DIYwithMichaelBorders]

Naturally*Dee* Awesome & Thanks for checking out the video and sharing your comment! We are so glad the video helped. We definitely found this to be a friendly repair & it’s always good to save money 💰. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍

[@MrAlittle5150]

Great video but I would recommend changing oil and filter after this repair. Used a good high quality oil and filter.

[@DIYwithMichaelBorders]

MrAlittle5150 Very cool & thanks for watching. Great recommendations & we appreciate you sharing. Keep us posted with your DIY project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@emmarietory7755]

Wait? Thats it? KZbin is a life saver i swear.

[@DIYwithMichaelBorders]

Emmarie Snider Awesome Awesome & we 100% agree. 😀 We appreciate you watching. Let us know if you have any questions, we are always here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@jameswilkes7824]

I believe there was some tv magic with connector removal 😂

[@zonedaiatlas]

Thank you so much! I had the P0013 error today and fixed it myself thanks to you.

[@DIYwithMichaelBorders]

Wayne J. Svantner Awesome Awesome & thanks for watching Wayne! That’s great news! We appreciate you taking the time to reach out to us! So glad the video helped! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again Wayne! 😎👍🔧🔩 Also below is a link to our Car Repair Video PlayList...it contains several videos that you can benefit from including additional videos on your vehicle. Definitely check those out! kzbin.info/aero/PLjCXOz8TSkZnavDiGDyHdPKe2dV2RzEMZ

[@scottkeppler6935]

What year is your Malibu ? I have a 2014 with the same code how do you know which might be the bad Solenoid.

[@DIYwithMichaelBorders]

Scott Keppler Thanks for watching Scott, we worked on a 2013 Malibu in this video. After hooking up OBD scanner to vehicle, you will get a Solenoid (A) error code or a Solenoid (B) error code. If you get an (A) error code, you will need to replace the Intake Solenoid. Below is a link to videos that show step-by-step process on replacing Intake Solenoid. kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M If you get a (B) error code, you will need to replace the Exhaust Solenoid as shown in this video. Keep us posted on your repair! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@scottkeppler6935]

Gave me some good advice I ordered a replacement camshaft actuator but my light came off still keeping the camshaft actuator when it comes in my car has 48 k on it im sure it will happen again but it really is a simple job I took off the plastic cover but I have to ask do I need to dissconect the trunk battery if I need to replace the censor ?

[@scottkeppler6935]

Didn't get a A or B error code just get the POO13 code

[@shanerichards4198]

Question other than check engine light on what was car doing was it acting weird cutting off Thanks???

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. You’re spot on, it was doing that exactly. Keep us posted on your project. 😎👍🔧🔩

[@jayvee9334]

Great video. I was wondering if you can you tell me what part number is for bank 1 ? I have a code p0011 Camshaft position a - timing over - advance system performance (bank 1) please let me know. Thank you

[@DIYwithMichaelBorders]

coast to coast Thanks for watching! Great question! We strongly recommend purchasing OEM part from your local Chevy Dealership. This will ensure you get the more reliable Solenoid rather than an aftermarket Solenoid. Give your local dealership a call & they will have the part ready for you that same day! Let us know if you have any additional questions along the way we are here to help. Keep us posted on your repair! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! Also, below are links to videos that show you the Step-by-step process on replacing your Solenoid. kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M

[@mitchferris1301]

I’m having the same problem removing the connector. The latch slides back easily but the connector doesn’t come off. Watching the video, it seems there’s some sort of tab on the solenoid that has to be cleared, so I’m guessing you have to push on something to clear that tab, but I’m not seeing anything. If anyone knows, please pass along. Thanks!

[@DIYwithMichaelBorders]

Mitch Ferris Thanks for watching! These little clips can be a pain. Most important thing is to be careful as you remove & reinstall it. Keep me posted on your repair Mitch. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍

[@mitchferris1301]

Turns out you slide the latch back, then squeeze the back part of that latch against the base of the connector and pull it off. I figured it was something simple.

[@DIYwithMichaelBorders]

Mitch Ferris Have you completed the project? If so, how did it go?...minus the Electrical Clips haha...

[@401Northwestern]

Great video! Question, my car won't start at all. Just before it conked out I had a diagnostic done because my engine light was on. The code I was given was p0013 C0899. I have a 2012 Chevy Malibu. Since I have a different year Malibu then the one in your video and my code is a C, I dont know specifically what part needs to be replaced. Can you help me?

[@401Northwestern]

Yeah I also tried to have my car jumped when it conked out but that didn't work.

[@darrenheard9943]

THANK YOU SO MUCH FOR THE DEMONSTRATION! YOU ARE AWESOME!!!!

[@DIYwithMichaelBorders]

Darren Heard Thanks for checking out the video and sharing your comment Darren! We appreciate you taking the time to reach out to us! So glad to hear the video helped. Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again Darren 😀👍🔧🔩

[@frankb518]

Hey, this is Frank in Troy, N.Y.. Nice job! it's Jan.3, 2021 I just did the Exhaust Solenoid { the front one] on my 2014 2.5 Malibu. and I did the Evap Purge Valve that sits just behind the Intake solenoid valve.. HAD Code P0455 [CPV] and a code P0014, so hopefully this fix's it! that 2013 you have has better Electrical conn's on it than the 2014. " Come on GM" why do they do such a crappy job on that stuff ? And the eco start stop function is A piece of Crap ! why did they ever do that? More electronics to go Wrong !!!! I think the Solenoid valves have something to with it. the code reader, reads P0014 and it is Bank 2, cam shaft positioning is Advanced.

[@DIYwithMichaelBorders]

Thanks for watching Frank & welcome to the DIY Raptor Club. We appreciate you sharing your thoughts & it sounds like you’ve been busy working on your car. Hopefully you’re back up and running properly and efficiently. Let us know if you have any questions, enjoy your day Frank. 😎👍🔧🔩

[@blakebusbee7186]

I was wondering if they made any whining noises , I have a 2013 Malibu LT 2.5 liter

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. It’s very possible. Are you showing the P0011 or P0013 fault codes?

[@blakebusbee7186]

@@DIYwithMichaelBorders I'm going to O'Reilly's today

[@DIYwithMichaelBorders]

@@blakebusbee7186 Very cool, keep us posted. 😎👍

[@Cilov]

Does anyone have a link to the piece here, Camshaft Exhaust Solenoid, I can't find the exact one, Malibu 2014 eco, same car in the video just 2014.

[@DIYwithMichaelBorders]

CiLO v Thanks for watching. We hope the video helped. Your 2014 engine will be very similar to this. Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@KweenIndy3]

Hi great video. I have a 2015 Malibu and my check engine light has been coming on and off. Got this code 3 times stored. I ordered the part just wanting for it to arrive hopefully sometime this upcoming week. I was wondering what is all the tools i should get to loosen the bolts and etc for this project? Thanks

[@DIYwithMichaelBorders]

Indy J. Thanks for watching Indy J. This is a very friendly DIY project & you will be so happy you saved a lot of 💰 by making it a DIY project. Very minimal tools required as you can see, all tool mentioned & shown in this video are all you need! Keep us posted on your project! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@KweenIndy3]

DIY With Michael Borders Thank you 😌

[@DIYwithMichaelBorders]

Indy J. 😎👍🔧🔩

[@KweenIndy3]

DIY With Michael Borders So as far as tools I found my ratcheting screwdriver and realized that I have a 10mm socket but as far as the socket i need for the engine screws i dont have a T30 i only have a T27 do you think that would work or would I have to go out and buy a T30 socket? Thanks in advance 🙂 Just want to make sure I have my tools in order before the part gets here.

[@DIYwithMichaelBorders]

Indy J. Thanks for the reply. We recommend renting a T-ratchet/socket set from your local AutoZone. It’s free...you pay for the rental, then use the tools for your project, then return tools to AutoZone & you get 100% of your money back. Hope this helps! 😎👍🔧🔩

[@christinamartinez7972]

My 2006 Chevy Impala is stalling, dying while I'm driving and it jerks when I accelerate speed. I replaced the 02 sensors, (upstream and downstream) crankshaft and camshaft position sensors, motor mounts, and mass air flow housing and my car is still stalling on me. What would you reccomend I do next? I subscribed. 🤷‍♀️❤

[@DIYwithMichaelBorders]

Christina Martinez Thanks for watching & sharing your experience Christina, let’s get this figured out! Let’s start with the simple friendly inexpensive options. 1. Air Filter: A dirty/clogged Air Filter can cause your exact symptoms. A new Filter will help increase engine performance. 2. Spark Plugs & Wires: It’s very important to replace Spark Plugs & Wires every 2-3 years. Worn out Wires & damaged Plugs will cause a significant loss of engine performance. We recommend replacing your Plugs & Wires...& make sure you purchase the right Plugs. Let’s start there, keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@christinamartinez7972]

@@DIYwithMichaelBorders All you listed have already been replaced this last month. Those were my parts to have replaced. I put SeaFoam in the engine yesterday. What is next to check? ❤

[@DIYwithMichaelBorders]

Christina Martinez Thanks for the reply, is your Check Engine Light illuminated by chance? If yes then we recommend visiting your local AutoZone and having them hook up the OBD scanner. They will then be able to show you what exact error codes are causing your engine light which in return will lead us directly to the part that needs to be replaced. Keep us posted! 😎👍🔧🔩

[@christinamartinez7972]

@@DIYwithMichaelBordersYes, the check engine light stays on then goes off. I work at Auto Zone. The obd2 scanner didn't read any error codes.

[@DIYwithMichaelBorders]

Christina Martinez Thanks for the reply! AutoZone is our favorite! 😎👍 What year is your Malibu? What spark plugs did you purchase? Also when you replaced spark plugs, did you apply the dielectric grease to your plug connections?... maybe too much dielectric grease was added... We have done this in the past when replacing spark plugs... we accidentally added way too much dielectric grease to the plugs ....😲...and once we inserted and secured the wires onto the new plugs... The engine ran worse than it did with the old dirty worn out plugs. So we took off the wires and cleaned off all the dielectric grease and then re-secured the wires to the plugs & the engine has run great for two years. Keep us posted! Let’s get this figured out! 😎👍🔧🔩

[@Biologist19681]

I'm having difficulty removing the wire harness from the solenoid. Yours slid right off. Was there a trick to this? I slid the white piece back until it clicked, but the harness will not come off.

[@DIYwithMichaelBorders]

Biologist19681 Thanks for checking out the video and sharing your experience. Th se clips can be tricky. Each electrical connection clips have a plastic locking tab. It requires you to shift locking tab. Once locking tab is shifted back, you will then need to carefully shift electrical connection clip off. Sorry for not showing it in the video. Keep me posted on your repair. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍🔧🔩

[@Biologist19681]

DIY With Michael Borders yes I shifted the locking tab but was unable to remove the harness. I'll try a few suggestions I found on another forum. Thanks.

[@DIYwithMichaelBorders]

Biologist19681 Awesome and Thanks for the update! Let me know when you get it off.

[@shadowlaw7312]

Biologist19681 Having the same issue, how did you finally get it off?

[@DIYwithMichaelBorders]

shadowlaw7312 Thanks for checking out the video and sharing your comment. Once you shift locking tab back, you then press locking tab inward and at the same time, you shift electrical connection off. Definitely keep us posted on your repair! Let us know if you have any additional questions. We are here to help! Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍🔧🔩

[@johnbartolini6820]

Thank you this helped me save $$$$ and time

[@DIYwithMichaelBorders]

John Bartolini Thanks for watching. Glad to hear you kept money in your pocket. Us fellow DIY’ers need to stick together. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@MrScottyAwesome]

I watched this video, ordered the part, the motor looks nothing like this. I guess my 2013 Malibu Eco is a 2.4. What's the difference?

[@DIYwithMichaelBorders]

MrScottyAwesome Thanks for watching! We appreciate you sharing your comment. Let’s get this figured out! We recommend calling your local Chevy Dealership & providing them with your exact year/engine size...they might even ask for your VIN #. Next, they will be able to get you the exact replacement part for your specific engine. We have replaced Solenoids on Chevy Cruze eco engines in the past & the Solenoids look very different. Below are two links to our videos that shows the eco Solenoid. Maybe this is what your engine needs however again, your local dealership will get you the correct part. kzbin.info/www/bejne/Znq9poCAqpajarM kzbin.info/www/bejne/l5-oZWObfpt_r8k Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@yungmondi4947]

My 2013 Malibu stalls or shuts off when I come to a stop..could this be the problem?

[@DIYwithMichaelBorders]

Yung Mondi Thanks for watching & sharing your experience. By chance have you had the car hooked up to a scanner? If so and you are receiving this specific code , you’ll want to replace your Solenoid. AutoZone will hook your vehicle up to their scanner to read error codes at no additional cost ...100% free. 😎 That’s a great place to start! Keep us posted. Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩

[@RASTAGOOB]

So here we go guys. Had my 2012 Chevy Malibu lt for 5 Plus years. Got my car back fall 2016 from my uncle. it was in the shop for almost a year while after a freak accident late 2015. From that time on guys. New fuel pump, air filter, brakes, tires, battery alternator starter still solid, the fuse box got realigned, camshafts solenoids replaced myself Christmas 2016( both of them) and the position sensor as of recent day. Fast forward now 2018, cranking my car it doesn't even start. Scanned the car the same code appears p0013, Got it jumped multiple times doesn't even cut on now. What could it be?

[@DIYwithMichaelBorders]

GOOB THA DON Thanks for checking out the video and sharing your experience. Let’s get this figured out! 😀 A few things come to mind. 1. As you know, your engine requires 3 things in order to start & continue to run efficiently! 1. Fuel 2. Spark 3. Air Since you have a new starter Installed & it’s at least cranking & attempting to start, it’s possible that your starter is not getting the assistance from one of those three items. In most cases, it’s the fuel delivery. It’s possible that fuel is not making it to the cylinders to be ignited by the plugs. It can be clogged injectors or clogged fuel filter. Or your fuel pump has failed...& not sending fuel to engine. It’s also important to check all of your spark plugs and coil’s to verify that they are not burning nor do they have oil on them. If you find this to be the case, we can walk you through the required steps to get that fixed. Let’s also focus on your electrical connections & wiring as well. We recommend doing a thorough inspection of all wiring & electrical connection points that feed to the parts that have been replaced. It’s possible that your electrical connection point came loose from a part...unlikely...however we can’t rule it out. Let’s start there! Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩

[@RASTAGOOB]

@@DIYwithMichaelBorders ok.. thanks guys. now fast forward today, the car starts fine. problem is the staggers and stops and had to start and drive and do the whole process again. is it the transmission? scanned it again now multiple codes come up. appreciate the feedback

[@DIYwithMichaelBorders]

GOOB THA DON Thanks for the update & sorry for the delay! What codes did it trigger? This will definitely help us pinpoint which part is either working intermittently or has become completely faulty. Keep us posted! 😎👍🔧🔩

[@maamaa8432]

I just got p0011 code witch solenoid is not working the exhaust or intake?🙏🏻

[@DIYwithMichaelBorders]

Maa Maa Thanks for watching, great question! I have attached two video links below that will help answer this question & also the step-by-step process of replacing part. Definitely check those out & let us know if you have any questions! kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again!

[@TheCokeMan3]

Great video. Thanks for the help.

[@DIYwithMichaelBorders]

Good morning, you are welcome and we are happy to help. Let us know if you have any questions and hey if you’re into crypto trading, check out our newly launched DIY ecosystem. Toolboxtoken.com Reach out to us any time! 🧰

[@monyahanna6832]

I need to replace my camshaft actuator solenoid for. 2009 chevy aveo. Is it as easy as this also?

[@DIYwithMichaelBorders]

Monya Hanna Thanks for watching Monya Hanna! It’s very similar. Its important to verify which Solenoid needs replacement. In our case, there is an intake Solenoid as well as an exhaust Solenoid. You want to replace the correct one. However since you’re replacing one, you can only benefit from replacing both at the same time since you’re taking a few parts off to gain access to faulty Solenoid. 😀 Hope this helps! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again 😎👍🔧🔩

[@monyahanna6832]

Can i get the part at an AutoZone?

[@DIYwithMichaelBorders]

Monya Hanna It’s very possible! I would check Amazon as well. AutoZone is the Best. We love AutoZone. If you drive your car up to AutoZone, they will hook their scanner up to your car & see what code it obtains. They will then have a good guidance on which part to replace! IDE try that first. Let us know what AutoZone says. 😎👍🔧🔩

[@therealdother]

I have a 2014 Chevy Malibu. My part came with a black o ring not green. Does that make a difference?

[@DIYwithMichaelBorders]

Thanks for watching & it’s possible that your specific vehicle year has a different ring. If they are the exact same size, shape, thickness, & rubber, you should be good to go. Keep us posted. 😎👍🔧🔩

[@therealdother]

@@DIYwithMichaelBorders thank so I drove for a week now, I can tell the lack performance. So I will order the green rings and see if changes. Thank you 🙏🏾

[@DIYwithMichaelBorders]

@@therealdother Thanks for the update & keep us posted. 😎👍🔧🔩

[@ledarriust1916]

Will the exhaust always be located in the front? I have a 2012 2.4 Malibu. I got the exhaust code but I’ll be replacing both

[@DIYwithMichaelBorders]

Ledarrius T Great question & this will depend on your model & year. So to answer your question, the exhaust will not always be located in the front. Thanks for checking out the video and sharing your comment. We really appreciate it. We hope the video helped. Please keep us posted on your project, we are very interested to hear your update & help in the event that you have any questions Below is a few other CHEVY Malibu videos that may help you down the road. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again 😎👍 Reset Oil Percentage: kzbin.info/www/bejne/pZClZp-Aat-sqs0 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs P0013 Code: kzbin.info/www/bejne/ZorEfWyIatNlraM Exhaust Solenoid: kzbin.info/www/bejne/mImvn2SBmdFjpdk Replace Key Fob Battery: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not working: kzbin.info/www/bejne/nouslH6Khbh8hqM P0010 / P0011 Error Code kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M

[@slickrickdarula9483]

I have a question I replaced both of my solenoids once and the car continued stalling but there was no check engine light so I thought that maybe the parts were bad so I went and exchange them for two new ones and the car is still doing the same thing what could be the issue? Thank you

[@DIYwithMichaelBorders]

Slick Rick Da Rula Thanks for watching & sharing your comment. Let’s get this figured out together! As you know, your engine requires 3 things to run. 1. Spark 2. Fuel 3. Air Spark: In the event that your spark plugs have not been changed in a few years it may be a good idea to replace your spark plugs and wires. As the spark plugs age and gather corrosion over the years, the efficient spark will degrade and may cause degraded engine performance. 2. Fuel: At any point your fuel delivery is interfered with or clogged, your engine will experience several issues. It’s possible that you may need to run some fuel system cleaner through your system and hopefully loosen up any gathered gunk on your injectors or inside your fuel pump that is ultimately interfering with your fuel delivery. 3. Air: One of the more commonly forgotten about parts in your engine is your air filter. Your air filter is very important and over the years your air filter can get to a point where it is so clogged that it is constantly causing degraded engine performance and sometimes leading you to think it something else when it’s really as simple as the air filter. Let’s start there. Keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@slickrickdarula9483]

All I had to do was put fresh oil and it stopped

[@slickrickdarula9483]

Of course I put the new solenoids in and it was still stalling but I just got the oil changed yesterday and it does not do it anymore the solenoids run off of the oil and for whatever reason the new oil made it stop. I talk to my mechanic and he told me he fixed the same problem on someone else's car all he did was take us Illinois's out clean off the little screens on the solenoids and change the oil and it worked

[@DIYwithMichaelBorders]

Slick Rick Da Rula Hey very cool & thanks for the update! These little Solenoids last roughly 60-70 thousand miles & then need to be replaced. 😎👍🔧🔩

[@DIYwithMichaelBorders]

Slick Rick Da Rula Awesome Awesome & that’s definitely another option. Some people however will clean, clean, clean, & clean it & the Solenoid still throws the error code. 😲 Thanks for sharing your update! You Rock! 😎👍🔧🔩

[@hectorfalcon6200]

It is necesary to unconnnect battery or is optional?? Engine hot or cold?

[@DIYwithMichaelBorders]

Thanks for watching, we always find it best to disconnect black battery from battery when working with anything electrical. 👍🧰

[@jorger6813]

I'm having this issue now. Where can I order the OEM part ?

[@DIYwithMichaelBorders]

Jorge R Thanks for watching Jorge R! We recommend contacting your Local Chevy Dealership. They will use OEM parts. It’s always a good idea to double check with the dealership before you purchase part. Keep us posted on your repair and let us know if you have any questions along the way. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again Jorge R 😎👍

[@Stairway2Hell88]

Is there a trick to pulling off that clip? Trying to remove mine and it does not seem to want to come off easy.

[@DIYwithMichaelBorders]

Nick Zimmerman Thanks for watching! These little clips can be a pain. Most important thing is to be patient & careful as you remove & reinstall it. You need to compress clip & shift tab off. Easier said than done. 😲 Keep us posted on your project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@joeolvera5175]

What does she mean when she says if you got the a code and b code?

[@DIYwithMichaelBorders]

Joe Olvera Thanks for checking out the video and sharing your comment...sorry for the delay. The A code & B code refer to the Exhaust Solenoid separately from the Intake Solenoid. It’s very important that you get the correct Solenoid. Below is an additional video that shows step-by-step on replacing Intake Solenoid. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍🔧🔩 Below is link to video: kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M

[@chicagomusicguide]

How did you determine that the solenoid was at fault? (As opposed to a camshaft cam phaser actuator of simply the fuse?

[@DIYwithMichaelBorders]

Chicago Music Guide Thanks for watching & great question. We used our OBD scanner which detected the exact error code that illuminated the check engine light. We recommend visiting your local AutoZone where they will hook up their OBD scanner to your vehicle & read error codes for 100% free. 😀 We hope the video helped. Let us know if you have any additional questions. Keep us posted on your DIY project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@chicagomusicguide]

@@DIYwithMichaelBorders Thank you SO MUCH for the super-speedy response! I greatly appreciate it! Actually, I have a 2013 Dodge Dart that just gave the P0013 code, took a trip to the AutoZone and they found that it is the Exhaust Camshaft Position Actuator Circuit / Open (Bank 1). I spoke to them this morning and an engine variable timing solenoid would do the trick, then I found your video which seems to support it.. however, I was also told by a friend that it would be camshaft position scanner... for the sake of being thorough, I odered both, but at the moment, this car is so new to me, I can't even figure out how to get the engine cover off to even [get] to the engine and I've worked on engines for other cars no problem. Any further assistance is greatly appreciated! Thanks again!

[@DIYwithMichaelBorders]

Chicago Music Guide Thanks for the reply & that’s great news! Congrats on the car & purchasing both parts will only benefit you. Lean Bank 1 & Lean Bank 2...or “A & B” are different as you know & in sounds like you have pinpointed the part. Keep us posted on your end result. There should be a few helpful videos on your exact make & model. 😎👍🔧🔩

[@chicagomusicguide]

@@DIYwithMichaelBorders Thanks again!

[@DIYwithMichaelBorders]

Chicago Music Guide 😎👍🔧🔩

[@mannydavila7027]

Is this the reason why the factory car starter won’t work ?

[@DIYwithMichaelBorders]

Manny davila Thanks for watching & that’s a great question! Once your Check-Engine light come on, it automatically inhibits your remote starting system. In order to get your remote starter to operate properly again, you’ll need to fix the part that is triggering your Check-Engine light... Below are two links that provide more info, definitely check those out! kzbin.info/www/bejne/nouslH6Khbh8hqM kzbin.info/www/bejne/gIeZnpqrisaBiLs Let’s start there, keep us posted! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@mannydavila7027]

DIY With Michael Borders thanks

[@DIYwithMichaelBorders]

Manny davila 😎👍🔧🔩

[@scottkeppler6935]

Didn't get a A or B code replaced the back one engine light came on again today ran a diagnostic machine again get the same P0013 code again the code read Camshaft Actuator Circuit Bank 1

[@DIYwithMichaelBorders]

Scott Keppler It’s possible that the other Solenoid has faulted & it’s time to replace it. As you know, it’s a very friendly DIY project & is also cost friendly. That is a fun replacement. Thanks for checking out the video and sharing your comment. We really appreciate it. We hope the video helped. Below is a few other CHEVY Malibu videos that may help you down the road. Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again 😎👍 Reset Oil Percentage: kzbin.info/www/bejne/pZClZp-Aat-sqs0 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs P0013 Code: kzbin.info/www/bejne/ZorEfWyIatNlraM Exhaust Solenoid: kzbin.info/www/bejne/mImvn2SBmdFjpdk Replace Key Fob Battery: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not working: kzbin.info/www/bejne/nouslH6Khbh8hqM P0010 / P0011 Error Code kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M

[@scottkeppler6935]

Thanks will do .

[@DIYwithMichaelBorders]

Scott Keppler 😎👍

[@Eli-mp8li]

Thank you for the video. That seems easy to do to save money. I'm getting the same code on my Malibu, except its on a 2010 LT. Is the solenoids located at the same area?

[@DIYwithMichaelBorders]

Thanks for watching & in most cases yes. For our 2013, there is a plastic cap that is supposed to always be connected on the solenoid. The other solenoid does not have one. Keep us posted on your project, enjoy your day. 😎👍🔧🔩

[@djkaneck1]

What yr is the car model?

[@DIYwithMichaelBorders]

DJ KaNeck Thanks for watching! This is a 2013 Malibu. We hope the video helped! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@MegaBALLINOUT]

What if the clip won't come off the solenoid?

[@DIYwithMichaelBorders]

Thanks for watching, they can definitely be a bit tricky. Most important approach is staying patient, precise, & gentle with clip. Keep us posted.

[@MegaBALLINOUT]

@@DIYwithMichaelBorders The clip still didn't come off like it's stuck even with the tab slide up for it to release but it won't slide off

[@DIYwithMichaelBorders]

@@MegaBALLINOUT Thanks for the update, that’s no fun. Haven’t had one hang on for dear life like that one...😲 Don’t really have a solid route or recommendation on that other than doing your best not to destroy it...🤔

[@scott9784]

Great job replacing the part. However the most important part of the job was not done. These solenoids fail do to oil quality, the first step of the job s to flush the old oil out.

[@DIYwithMichaelBorders]

Scott, we appreciate you watching & sharing your thoughts. Any & all helpful info is greatly appreciated!! Hope all is well with you and your family. 😎👍

[@OhhThatsKo]

My clip is broke and the wires came out , what do I do ?

[@jamalmakki3700]

Done good enough ... THANK you very much

[@DIYwithMichaelBorders]

Jamal Makki Very cool and you are very welcome! We really appreciate you sharing your comment. How did your DIY project go? Let us know if you have any questions we are here to help. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@joeolvera5175]

Could I get link to part?

[@DIYwithMichaelBorders]

Joe Olvera Thanks for checking out the video Joe! Unfortunately this is still a dealership part and has not been released to local auto parts stores such as O’Reillys and AutoZone. We recommend contacting your local Chevy dealership to purchase part! Keep us posted on your repair. Let us know if you have any additional questions along the way! Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again Joe 😎👍🔧🔩

[@fishermanofmen4196]

You the woman!✌👍👍👍

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. We really appreciate that & let us know if you have any questions. Enjoy your day isac. 😎👍🔧🔩

[@MrLADodger1]

Awesome Vid! Thank You So much UR a Life & Money Saver!👍👌😘😁

[@DIYwithMichaelBorders]

Dj Spinnin Tops We really appreciate your comments! That’s awesome! Let us know if you have any additional questions! We are here to help! 😎👍

[@DIYwithMichaelBorders]

Dj Spinnin Tops I posted this on your other comment as well...links to Malibu videos that you may find very helpful! 😎👍 Reset Oil Percentage: kzbin.info/www/bejne/pZClZp-Aat-sqs0 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs P0013 Code: kzbin.info/www/bejne/ZorEfWyIatNlraM Exhaust Solenoid: kzbin.info/www/bejne/mImvn2SBmdFjpdk Replace Key Fob Battery: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not working: kzbin.info/www/bejne/nouslH6Khbh8hqM P0010 / P0011 Error Code kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M

[@pimpjuicejv13]

where did you all buy your parts, i can only find the one for exhaust.

[@DIYwithMichaelBorders]

Jessica Vierra Thanks for watching & that’s a great question Jessica. We purchased our OEM parts from our local Chevy Dealership. For some odd reason AutoZone & other auto parts stores don’t sell these Solenoids. Let us know if you have any additional questions, we are here to help! Keep us posted on your DIY project! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again Jessica! 😎👍🔧🔩

[@fernandomoran6393]

I love you ❤️. Ups sorry .. I love it! Thanks!

[@DIYwithMichaelBorders]

Fernando Moran 😊 Thank you thank you, & thanks for checking out the video and sharing your comment. We really appreciate it. We hope the video helped. Below is a few other CHEVY Malibu videos that may help you down the road. Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again 😎👍 Reset Oil Percentage: kzbin.info/www/bejne/pZClZp-Aat-sqs0 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs P0013 Code: kzbin.info/www/bejne/ZorEfWyIatNlraM Exhaust Solenoid: kzbin.info/www/bejne/mImvn2SBmdFjpdk Replace Key Fob Battery: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not working: kzbin.info/www/bejne/nouslH6Khbh8hqM P0010 / P0011 Error Code kzbin.info/www/bejne/nn_Fk3ewqbJsmMU kzbin.info/www/bejne/oKqQhnqCbNN3n7M

[@Ron-h4l]

How many miles on this chevy.

[@DIYwithMichaelBorders]

john1240able Thanks for checking out the video john1240able! We are just shy of 70,000 miles! Are you experiencing the same error code? Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍🔧🔩

[@MegaBbqbbq]

leave the light on, if it's fixed it will go out

[@DIYwithMichaelBorders]

dave scott Thanks for the info dave! We have enjoyed the Malibu over the years! Most repairs are DIY friendly. Let us know if you have any additional questions! 😎👍🔧🔩

[@kendramcbride7812]

Will it go out instantly?

[@DIYwithMichaelBorders]

K M Thanks for watching! Great question! After the Solenoid sets off Error Code, it has gotten to a point where it is no longer working at the specified efficiency as it is supposed to. It is recommended to replace it or your engine performance will degrade & may cause additional problems over time. Hope this helps! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩

[@MegaBbqbbq]

at last, someone else figured out it's a T30

[@DIYwithMichaelBorders]

dave scott Hi Dave thanks for checking out the video and sharing your comment. We appreciate you taking the time to reach out to us! This is definitely a friendly DIY project and can save you some money 💰. Let us know if you have any additional questions along the way we are here to help. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍🔧🔩

[@damarcusbuck3596]

How to get the clips off ?

[@DIYwithMichaelBorders]

Damarcus Buck Thanks for watching & we hope the video helped. Those little things can be tricky. It’s definitely a two hand step. 😃 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@feliciahawkins3131]

Yes it’s very tricky and with two hands we still are unable to get the clamp loose.. maybe you guys should make a video completely showing you getting the clamps released and the trickiness to it so we’ll kind of have a idea 🙂🙂🙂

[@DIYwithMichaelBorders]

Felicia Hawkins Thanks for watching & we like that. 😎👍🔧🔩

[@newhere0]

She romoved very easy the electrical connection and that's the thing I can not take it away :(

[@DIYwithMichaelBorders]

Ben Thanks for watching & we hope you enjoyed the video. These little locking clips can be tricky. Definitely keep us posted on your project Ben. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@newhere0]

@@DIYwithMichaelBorders thank you I took the clip out but the conector seemed to be jamed

[@DIYwithMichaelBorders]

Ben Very cool & hopefully you can get your Malibu back up and running properly. 😎👍🔧🔩

[@bigkev6784]

Tks Sista' 😀

[@DIYwithMichaelBorders]

big kev Thanks for watching & we hope the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩

[@andyjones5]

This the same for chevy impala

[@DIYwithMichaelBorders]

Andy Jones Thanks for watching Andy! Same for Chevy Impala. Let us know if you have any additional questions along the way we are here to help. Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩

[@andyjones5]

DIY With Michael Borders. So for chevy impala 2010 its in the exact same spot.My enginr light is on i got it read and that code came up thank you!!!

[@DIYwithMichaelBorders]

Andy Jones Great question. Same part however may be I’d different location on engine. We recommend purchasing part from Dealership. Did your code say Intake Solenoid or did it say Exhaust Solenoid? Make sure you purchase correct Solenoid! 😎👍

[@andyjones5]

DIY With Michael Borders it said actuator selonid

[@DIYwithMichaelBorders]

Andy Jones There should be second page code on the scanner that will indicate if it’s Intake or Exhaust.

[@flytye824]

So the mechanic trying to charge me $90 to fix this. NOPE

[@DIYwithMichaelBorders]

tye Kellz Yikes..this is definitely a friendly Do-It-Yourself project and can save you some 💰 💰. Keep us posted on your repair. Let us know if you have any additional questions along the way we are here to help! Thanks for checking out the video and sharing your comment. Below are a few other videos that might help you along the way. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍 Air Filter Replacement: kzbin.info/www/bejne/i6W7lX6Hf8plnLs P0013 Code kzbin.info/www/bejne/ZorEfWyIatNlraM Camshaft Actuator: kzbin.info/www/bejne/mImvn2SBmdFjpdk Key Fob Battery Replacement: kzbin.info/www/bejne/gIeZnpqrisaBiLs Remote Stater not Working: kzbin.info/www/bejne/nouslH6Khbh8hqM Oil Reset Procedure: kzbin.info/www/bejne/pZClZp-Aat-sqs0 P0010 / P0011 Codes kzbin.info/www/bejne/pZClZp-Aat-sqs0 kzbin.info/www/bejne/oKqQhnqCbNN3n7M

[@igorzamorski5085]

Isnt p0011 its intake solenoid

[@DIYwithMichaelBorders]

igor zamorski Thanks for watching & sharing your question. The P0011 error code is tied to your Solenoid & depending on whether you get the (A) or (B) reference will lead you to which Solenoid to replace. With our specific make, model, & year....the (A) reference is the Intake Solenoid & the (B) reference is the Exhaust Solenoid. Replacing them both at the same time isn’t a bad idea either. 😀 We hope this helps. Let us know if you have any additional questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩

[@igorzamorski5085]

Thanks for the replay i have code p0011 and my mechanic said it has to do with oil pressure or bad quality oil does it make sense?does the solenoid problem its common for chevrolet malibu 2013? My car drove only 56000 kilometres a bit too soon?

[@DIYwithMichaelBorders]

igor zamorski Thanks for the reply & unfortunately this is an extremely common issue with Chevy engines lately. It’s possible that the oil grade caused your error code. This engine requires Synthetic Oil & if Synthetic Oil is drained & Conventional Oil is added, it may trip the sensor as it is noticing a downgrade in required oil. Hope this helps. Keep us posted! 😎👍🔧🔩

[@julioa7558]

Nice

[@DIYwithMichaelBorders]

Thanks for watching & welcome to the DIY Raptor Club. Happy to help. Enjoy your day Julio. 😎👍🔧🔩

[@Snowboy2015]

you are my dream woman! you anglo american, you..