Chevy Silverado Single Cab (Super Short Bed Conversion)

[@snoopu2601]

The more you guys do the better and faster y'all will get at it. Great job you guy's 👍🏽🏁

[@pissed_and_broke_offroad]

You cut off the main frame support for the rear spring hangers, and the area that you bolted the spring hangers onto now are much weaker than the stock location because they have no backing plates and no frame crossmember support. over time your frame is going to warp and you will get axle wrap on your rear end.. The correct way to do a short bed conversion requires cutting off the factory weld at the rear of the frame and sliding the rear section of the frame forward after removing 14" of the frame out of the middle . this way you keep the frame crossmembers. it takes alot of cutting grinding and welding. I wish it was that easy like you showed in the video.

[@torosantana7489]

If it works, it works. The owner could get some cross members welded up on the frame. Worse case scenario he could get a 4 link/3link wishbone suspension in the rear.

[@nathanstevens2664]

I wish Chevy didn't have a different fuel tank for long vs short bed

[@7beast298]

Good job fellas! I wish yall would of showed more video of the front leaf spring hangers, did they have to be modified in any way?

[@aydenmendoza7524]

Bro thanks for the video but it would be even better if you showed more details doesn't matter if the video is longer keep them coming

[@robakagyser2300]

What is the wheelbase length now the rear axel was moved forward. I like this combination it is awesome! Kind of makes me think of the length of the old square body K5 Chevy Blazer.

[@joseraulzarraga9475]

Good job guys . Thinking about doing that same thing the only thing that bugs me is the gas tank sitting on top

[@Dominoid86]

Better for off roading

[@bhop222]

Where are you guys from I may have some work for you

[@marvinmedina8370]

Me too 😭

[@ickyiceful]

Lucky ass California-Texas Mexicans it’s never that simple working on my truck in Pennsylvania every bolt strips or line breaks from rust and once you remove the bed you need to reweld strut mounts subframe connectors in the frame really gotta drive out that way for my next build

[@redhatch9862]

Unlucky caucasian 😂

[@snoopu2601]

It will look pretty cool lowerd with a paint job it will definitely be different from all the rest. Don't think I've ever seen a super short bed. The gas tank has to be mounted under the truck even if a Kustom tank has to be made.

[@linelivin628]

Looks funny

[@arturoeschistosocervantes4626]

Looks funny the truck?

[@linelivin628]

Yea

[@moelester6789]

its prob the suspension

[@linelivin628]

Ok my comment was insensitive. Though the looks are not my taste, i can appreciate the work done and i wish i could be as handy. Props

[@KlNGOFFICIAL]

Cause it’s not lowered

[@yankee4893]

You change the vapor canister

[@arampanozian3537]

Where are you guys located ?

[@redlineperformance6738]

Could I copy this onto an 07 nnbs?

[@kohlchambers217]

Looks a little stubby because of that shorter short box but a cool idea that I may attempt at some point 👍

[@Silent_Ivan]

How much did it cost?

[@maxeicontreras8245]

I wouldn’t recommend just chopping the back half and leaning the cross member off but do what you gotta do I guess I cut the frames and weld them back like factory I charger 1,500 In Vegas

[@MartinGonzalez-dq2in]

Send me your info

[@KlNGOFFICIAL]

What’s your insta

[@trippytoyz_]

Send me ur info

[@jasonportillo2717]

How far did you move it forward ?

[@mikehungcho]

14 inches

[@user-q7k3i]

where @

[@yeto_5.3]

How much you guys charge

[@gunstapers6664]

how much for this

[@klueless1473]

Can a bed from a ext cab go on a single cab?

[@Manny-mk8rl]

Modified yes

[@chrischavez5908]

A single cab bed and ext cab are the same length

[@jorgearteaga2759]

Esa caja es de una doble cabina osea que es más corta de lo normal...

[@Manny-mk8rl]

Si exacto! ASI lo pidieron

[@arturoeschistosocervantes4626]

Yo también le puedo hacer a mi 89 chevy long bed y ponerle una stepside bed se podra?

[@Manny-mk8rl]

Si