The last few weeks have been a great break, but it feels amazing to be back on here. I missed you guys! Thank you so much for the tips on my heater install! I will be making the changes needed in the next few weeks, like rearranging my muffler. All of the small adjustments and final touches to the van will be it's own video.... so keep an eye out. See you all in a week!
@petrimuinonen34623 жыл бұрын
That air intake filter for the combustion air would also need relocating. Beside a tire it can suck water into combustion chamber. Also it is not so important to keep it so far away from exhaust, since that air is for combustion, it does not get inside of the van.
@ultragio39833 жыл бұрын
My favorite part of this video is she laughs at her mistakes. This girl is really growing as a builder/creator.
@mikeholler5143 жыл бұрын
Thank you for your honest documentary. It's important to be slow, careful and meticulous, and to learn from ours and others' mistakes.
@Linneaandakela3 жыл бұрын
Of course, I appreciate this!
@manvanross3 жыл бұрын
Good job, Linnea. You’re going to think “OMG! More criticism!” Here goes... all the research I’ve done in these, there WILL be unburned fuel make it into your exhaust pipe. Position the pipe and muffler so it doesn’t pool and if you look closely at the muffler, it has a pee hole in one side, that has to be downward to allow drainage. Carry on!!
@JohnSmith-fe7nf3 жыл бұрын
I think you did an excellent job. Just got my heater today 5/27/21. I'm a mechanic and I must say all those parts in the box got me a bit confused. The directions i got are complete gibberish. There is no way you could have planned your first install. A lot of people think these are just plug and play. No way. You did really good and you learn from mistakes. Great video. 👍
@ethanwayne64953 жыл бұрын
This was fun to watch. Love her enthusiasm 😊👍👍
@Maddie.taylor3 жыл бұрын
I literally just did the EXACT same thing with a giant hole saw bit when I was plumbing the van. Girl, I feel your struggle.
@ginabrytowski35643 жыл бұрын
This is the first diesel heater video I've been able to watch in it's entirety and understand. 🙌 Also you have all of my respect for not having a meltdown after drilling the wrong holes. I would have had a stroke lol. ❤️
@gypsy_under_supervised13 жыл бұрын
You are one of the biggest helps on KZbin for me girl.
@cathietonkin55773 жыл бұрын
Congratulations!!!! You are so ‘real’... mistakes and all, which makes your videos awesome!
@MrGundawindy3 жыл бұрын
I love how you have no idea what you're doing, but you're still doing it, and making it work. Keep up the great work, you are inspirational. Have a good read of the comments section. There's a lot of great tips and safety advice there. Stay safe and happy travels.
@pinebearclub3 жыл бұрын
Awesome video! Now I know how to prime the stupid thing! Things I did differently… 1) I used 3” METAL heater pipe, just in case of fire! 2) I’m planning on a big deep cycle battery or eventually a lithium setup. My fuel tank is in my back door and the line is attached to the top of the tank to minimize leakage and this makes filling it easier and cleaner. 4) I made a small plywood bracket to hang the pump from. I drilled two holes the size of the fuel line and the pump is hanging on the lines, I found this to be real quiet! Great install, I learned a ton! Bryan from Vancouver
@SolsticeOnAnOdyssey Жыл бұрын
Hey Bryan from Vancouver, How did putting the putting the fuel line on top of the tank work? Doesn't it need gravity to pump out every drop of the diesel? Or did you lead it down in like a straw? Thanks! The reason I ask is that I have a huge leak and I put the gaskets on both sides of the nipple and tightened it on as far as I know correctly.
@Trang-xq9fn3 жыл бұрын
I was hoping that you would install a Chinese heater. Now I can learn from you. Thank you!
@FirstSuiGeneris3 жыл бұрын
I wanted to say a good job and pushing through until you finished it. It will help you down the road if there's ever a problem with it. Just to let you know, they all name brands are built in China and from the same companies. You were smart going with the cheaper one. I've had mine for three-season now and no problems.
@sikmom13 жыл бұрын
Thank you for showing us the struggles and the success. You are a wonderful vlogger!!!
@sheyedlington90463 жыл бұрын
Linneya you are such a determined, positive, funny builder.. Your footage of the snow was lush. I love all your work. Thank you. Keep warm and roll on summer. 🤗☀️🏖️
@leamazzocchi7303 Жыл бұрын
Thank you for you last seconds of the video! Best part! I am building my van and I'm just really impressed by how yours look and for making all these videos and taking the time on this channel in parallel! I have a full time job in parallel and bought my van 5months ago.. The electricity is not even done... But thank you for your motivation
@frankiebeech55773 жыл бұрын
So funny that you posted this today. I just ordered mine today. So proud of you!
@jonathanstephens95153 жыл бұрын
Hi young lady, We are transforming our Mercedes sprinter van into our home and would just like to say' You 'are a very inspirational young lady and yes I have used your videos for how to do jobs in our van , what you are doing all for yourself and your fluffy white buddie is great hope that your travels will be safe and fun please keep up with the videos jon and Kirsten Cornwall England x
@Karo270073 жыл бұрын
The not measuring exactly enough could have been me, 100%ly 😂
@David_111113 жыл бұрын
Love you posted your mishaps Drilling so real ... Respect .
@Simonofcalifornia3 жыл бұрын
Measure twice cut once. For holes, measure 4x.
@drewwarmath25593 жыл бұрын
I absolutely love your enthusiasm. Lol. Great video. 👍🏻👍🏻
@Linneaandakela3 жыл бұрын
Thank you!!
@Ohsage11113 жыл бұрын
lol. All the holes gave me a great belly laugh :) I've SO been there. You're doing great!
@normahalliburton29083 жыл бұрын
Another great video Linnea, 10 out of 10 for perseverance, you did a top job, take care and stay safe x
@kimsalabim48713 жыл бұрын
Thank you for your video series. You make me believe in myself and with your help i have done a lot myself already ❤
@DavetheUberSlave3 жыл бұрын
So kind of you to make this thorough video to help others. It's a good video too.
@Linneaandakela3 жыл бұрын
Thank you so much ♥️
@marlenagolba74993 жыл бұрын
I've basically binge watched whole series within two days. You are so positive, inspiring and funny woman. It feels so empowering to watch solo female doing all of that stuff on her own. Thank you for sharing this with us, I've learned a lot from you! All the best on your journey, hope to see some shots of your future travels! A lot of love for you and Akila.❣️
@Linneaandakela3 жыл бұрын
Wow, thank you so much!❤️
@davewenners67223 жыл бұрын
I love how much detail you explain. I think I'm buying a G30. Start with that and rebuild as I go.
@OneManEngineering2 жыл бұрын
Hey Linnea, Spotted something and hope you fixed it already but if didn’t here it is: The muffler HAS TO BE the lowest point in your exhaust line. Saw that the exhaust pipe goes lower and then comes back up. That will cause problems as the vapour will pool there and turn into water then rust your system and will throw up some error codes. Make sure the muffler is in upright position and lower than anything else in the line. Apart of this amazing job. Well done girl! Proud of you! Greg
@shortbus3 жыл бұрын
You did an awesome job. I'm benching mine now and then I'll be installing...thanks again.
@francescaneale72443 жыл бұрын
I have seen all of your videos of the build and your van is really starting to come together!
@KOM-jh3 жыл бұрын
I have started building my own build the past month and glad I found this video as I was looking at the more expensive webasto heaters. Sucks to see you struggle with this project, but it was for sure helpful for me! Thanks
@sukamayoutube23233 жыл бұрын
Hope its going good!
@tidelinetoalpine3 жыл бұрын
Thank you for making this video!! I've gone 8 winters without heat and was recently gifted one of these heaters and am just embarking on this install adventure
@billb9022 жыл бұрын
Girl you are fearless... love it.
@cally24573 жыл бұрын
Yay! Just bought one. So happy you made a video about it!
@branditamplen83893 жыл бұрын
I am so proud of and impressed with you! I stumbled upon you on TikTok and was so intrigued I followed you on KZbin... I have been a sub from almost the first video. I have watched your videos since you researched and bought your van and researched and did your own electric (wow) and now to install your own heating (again wow) .. and all of the videos in between ... I am so impressed by and proud of you!! Your van is beautiful and I have very eagerly awaited each and every one of your videos. You are an amazing, strong, independent woman setting an example.. thank you!! I look forward to following your travels now that the build is just about done!!
@JK-ns5dr3 жыл бұрын
I just installed mine too. finding a good location for everything can be a challenge. One thing I've read was that the exhaust has a little condensation in it so the muffler should be the lowest point in the system so the water can drain and not rust the pipe, also the muffler has I little drain hole on the bottom so the muffler actually needs the be mounted horizontally. that's where I had problems trying to find a spot to do that. Great job on the build, cant wait to see videos of you on the road.
@highgate74293 жыл бұрын
Great job. I could see the frustration on your face. But you persevered and were successful.
@SethSongwriter2 жыл бұрын
Great video, I'm installing mine now here in the Midwest. About time, I had to send the first one back. It's been cold. I learned some things from you, I appreciate your video. Next time you have to drill big holes in your floor just start by running a screw down first then going under and measuring your clearances. I was a heating install tech on residential construction, I had to do that alot. I hope to run into you in a state park or something out there. I subscribed. I really like your show. God bless you.
@SethSongwriter2 жыл бұрын
Yeah that's what was wrong with my first heater I sent back. A electric connection was faulty
@SolsticeOnAnOdyssey Жыл бұрын
Thank you for validating that this was the hardest most annoying thing to install. I have to agree after all the other things I have built in my van. Solar is a piece of cake compared to this. Your video really put a lot more detail than I have seen in the other videos that seem to assume you know all those details. I've had a few meltdowns and at the moment I have diesel leak from the first fill up of the tank. so now my van smells like freaking diesel and I have no idea why it is leaking since I feel like I followed the instructions so carefully. I've watched a lot of KZbin Videos and read a couple of blogs and watched videos on Amazon. Man this thing is such a bugger.
@Barry_BredaNL3 жыл бұрын
Great going!! that was a heroic install!!!
@robincastree2 жыл бұрын
great video, you are doing so much good work helping other people from avoiding your mistakes. You are great!
@scottmork95982 жыл бұрын
Super easy solution to quiet the fuel pump. Cut a 2" wide strip of rubber about 8 inches long, (an old mud flap from a semi truck is perfect for this.) Drill a hole in each end of the strip, form a circle and insert bolt and mount in chosen location. Drill a hole through the strip opposite your mounting and bolt pump to the loop. The loop of heavy rubber does an amazing job of silencing the pump. Worked for me. 🙂
@transverseuniverse3 жыл бұрын
Nice work on this install! I installed this in my tiny house before moving to Leadville, CO and it is working great! Scary to install - definitely agree with the "I think it might blow up" feeling - and the weird smells on the first few runs weirded me out, but it's kept the house warm even during nights it goes to -5 f and during days when it only gets to 10 f. Soooo satisfying when it works! I also lifted mine up for the fuel line and ended up keeping it like that since there wasn't any metal bottom to reach (just floor-foam-plywood underneath the trailer). So I ended up wrapping the exhaust with this green heat insulation wrap thing. Still a little worried about exhaust seeping out from the clamped part but CO alarm has never gone off...
@feesoot224811 ай бұрын
Best video of installing one of these ive found. Thank you.
@APC933 жыл бұрын
Did you put a grommet around the fuel line when you passed it through the floor ?... wouldnt want the metal to rub a hole in the line
@phstudio1003 жыл бұрын
Yes, absolutely! As it is, the fuel line will chafe, leak, then fail. It's just a matter of how long it will take. Dirt washboard roads will exacerbate it. Over all, fantastic job, Linnea.
@Simonofcalifornia3 жыл бұрын
Cut a vacuums or hose in half and put it anywhere hose or electrical comes contact with metal. Also bit of silicone won’t hurt.
@irsuzy3 жыл бұрын
I got on here to say the same thing! Great job Linnea, just cushion your fuel line so it doesn’t rub and leak!
@MagicianVANish3 жыл бұрын
This was a great video. I am happy that you posted some of the problems you were having so it is easier for when anyone needs to install a heater. When I install my heater I will reference your channel also.
@Linneaandakela3 жыл бұрын
Glad it was helpful! Thank you!
@aradiantjoy3 жыл бұрын
Congrats! Looked to be one of the more intimidating aspects of the conversion and you made it through ❤️❤️❤️
@Linneaandakela3 жыл бұрын
Yes! Thank you!
@johngrant13373 жыл бұрын
VERY IMPORTANT!! You need to have the Exhaust pipe and muffler blowing out the side of the van and not under your side window ! The problem of the exhaust being under the center of the Van is it well built up carbon dioxide. Being under the center of the van it will build-up and come into the van ! You MUST have carbon dioxide detector! PLEASE get the detector!
@Simonofcalifornia3 жыл бұрын
Best location, specially if you have diesel is toward the engine bay. It will keep the engine warm for morning startup. Also get a filter or wrap some screen on the air intake.
@johnpaul21023 жыл бұрын
Yes!! CARBON MONOXIDE is a killer. Move your exhaust and get a detector. We want you to keep making videos.
@paigem3 жыл бұрын
I thought I saw a co detector in package Just at the 19:50 mark ?
@axlbass80183 жыл бұрын
@@paigem you are right, that is a carbon monoxide detector she had there
@kalenkotalik3 жыл бұрын
If I cant afford to have my future van built out then ima go by you for instructions and advice
@nadieselgirl3 жыл бұрын
Very nice install! I wish I was half as handy with wood. One tip/issue I ran into: The "air filter" is barely just a screen and having it next to your wheel like that will have in breathing in bad things quickly. I found a "real" filter for mine, its like a closed black box that you plug the hose into. But there are a few other solutions that sort of worked for me: 1. I built a shield for it from an aluminum can, opened a slot in the top and used metal zip ties to secure it. I later modified it by taking some cheese cloth with oil on it and wrapped it around the "filter" just a few layers. 2. I briefly ran it with the air intake inside the vehicle. However, this was a bit loud. 3. Take the existing intake filter/hose and shove it into your frame rails or other part of your underbody that stays cleanest. Also thanks for being so legit and real! This has been a fun learning adventure for me and it clearly is for you too!
@jamescarroll06153 жыл бұрын
Dogo's face when you were excited for warm air was priceless.
@busdweller3 жыл бұрын
I must say on a scale of 10 I give you 10 for cuteness and a 15 for determination. Happy trails 😎
@cobaltt883 жыл бұрын
Great video. Most people would have quit halfway through. 1 tip, move that air intake away from the tire. put it in a protected area up near the body of the van. Great Job.
@Linneaandakela3 жыл бұрын
Thanks you!!
@purposelydriven65663 жыл бұрын
Love the video the journey is amazing
@johnbroystonjr233 жыл бұрын
Hey Linnea & Akela!!! As usual, trial and error rears its head but you're an expert at overcoming challenges. You're teaching a LOT of folks some valuable lessons along the way. You did an excellent job working through the bugs! Thank you for sharing your knowledge and experiences. 😎
@Q2bFF3 жыл бұрын
Feels like I’ve been waiting forever for a new video.
@alaskajeeping36022 жыл бұрын
Not sure if you've changed your exhaust layout yet but: rotate the muffler so the 'weep' is pointed downard (there is a small stamped mark to indicate the bottom). Also, you want the exhaust tube to be level or slightly downward to the muffler. This prevents moisture from accumulutaing in the exhaust tube. Really nice job on the install and video.
@shaynalee80263 жыл бұрын
Thankyou so much for making this video! Very helpful!!
@jjs8112 жыл бұрын
Great job! One thing I didn’t see a grommet around the fuel line coming into the van. The metal touching the fuel line will eventually wear a hole in it. Great job working through the troubles and making it work!!
@Linneaandakela2 жыл бұрын
Thank you! It was a big pain in my butt. haha The fuel line doesn't have a grommet but it is protected by fireseal (rubbery and firm) and I made sure it isn't touching the metal at all. But thank you for double checking, I appreciate it a lot!
@glenn9878 Жыл бұрын
Helpful video. Thankyou. Not many vids on E-04 error. But it is connected to either problems with the fuel pump or fuel pump wiring faults. A few tips to help you if you get this error. Check fuel pump wiring and connections and change out fuel pump or try hitting existing pump to get piston moving again.
@B-B3753 жыл бұрын
Hard to believe it will be done in week and half. Hope you will bring us along for the ride. Glad to see it all working out. Godspeed
@marlysvantastic77723 жыл бұрын
Thanks for putting this info out there for other people in the van life community to learn from your mistakes and successes! Sorry this was so frustrating!
@stevehendrickson34253 жыл бұрын
I think it would be wise to have a rubber grommet for the fuel line and any wires to keep the wires and fuel line from fraying and causing a short or licking fuel. Also, taking any sharp edges off your holes with some sand paper and a coat of primer for rust. That all said, I admire your courage and your ability to laugh at yourself and or the situation! Best to you in life and love!!!
@danhohman2 жыл бұрын
Thank you for another amazing video Linnea! You really do amaze me when you tackle these projects and I learn so much from your videos!
@lokis72303 жыл бұрын
Mount the exhaust pipe so it ends outside the side of the van. You can cut the pipe if it's too long. And it should also lean downwards to prevent water from flowing into the pipe. I struggled with a similar heater in my Peugot Boxer (same as Promaster) and it's not very easy. My van is a diesel so I can take fuel from the van fuel tank. Well done!!
@APC933 жыл бұрын
Been following your build, so interesting and wanting to build my own
@davidcroft86453 жыл бұрын
Well done. I put some heat wrap bandage around my exhaust and some 10mm cable conduit around my fuel line both under the van just because they are close under there and it was an added level of protection.
@nicolerumsey92152 жыл бұрын
Dad see ew were ferlrl see
@samanthabecerra2173 жыл бұрын
this made me SO happy for you... great job ❤️
@georgeflora11783 жыл бұрын
Great Job!! Way to persevere!
@k_blyth88033 жыл бұрын
Aw well done, bet it was worth all the stress & pain to get you & Akela nice & snug. I thought this might have been your last post, but im glad you will be back with another up date. I look forward to your videos & will be happy for you when the van is complete....but also sad 😥. Hope to continue seeing lots of you & the gorgeous Akela. Take care & good luck with the finish xx
@vidsvideos3 жыл бұрын
Hello friend, first of love your videos. The one thing I wanted to mention is you may want to put in a rubber grommet where the fuel line goes under the van because of the sharp edges. Besides that it looks great. 👍🏠🚀
@susanscovill68173 жыл бұрын
When you do your next build (and I’m sure you will) drill from underneath into the cab. Something I’ve also learned from others is make sure you run on high for awhile when you turn it on. Also, some units do not like eco diesel. Check the air intake at the unit to ensure it’s clear of dust and fluff etc. It’ll need to be cleaned out every few months. Cheers from Canader eh!
@dbpfrontgater438 Жыл бұрын
John McK 47 is the guru of the Diesel heater.
@imErdal3 жыл бұрын
Binged videos today, reached the end, now I feel a bit empty inside. 😅
@MTknives3 жыл бұрын
Thanks for the video, I am installing one on my mobile shop now. :)
@LostNative3 жыл бұрын
Lol u remind me of me, I'm currently building my van, close to finishing and just put the diesel heater in, installing in -3 snowing also. 🤣
@philjhealey3 жыл бұрын
Awesome video, thank you.
@sandylee17173 жыл бұрын
You can do ANYTHING!! Awesome info as always! I took the easy route with Webasto professional install. Great dry heat!
@Rosie-jx6jo3 жыл бұрын
I just discovered your channel a few days ago and have been binge watching your videos. Also, my Yoshi is your dogs twin! I usually call him pooh, pooh bear! 😷
@ronethridge98753 жыл бұрын
yea you got it done /it will be super great to have warm-hot heat in very cold cold cold conditions/you are smart girl/it is your sweet home/traveling woman/thanks much
@tobeyanderson26733 жыл бұрын
Another very useful vid. Thanks. 👊🍻
@kayakchrispy2 жыл бұрын
I just installed one ! It works great so far .. I was going to install the fuel pump and filter inside as well but when I was filling the parts I realized that the tubing had to go down below and back up again and I didn’t want to have air bubbles forming after the pump cavitate‘s. So I mounted the pump just underneath the heater outside but it is a short run at the correct angle with no chance for air bubbles to form anywhere so it will feed gas efficiently even with the green tubing… I wrapped the pump and filter in cloth and plastic then taped it to weather proof ..
@kalenkotalik3 жыл бұрын
I can literally feel the cold air through the screen
@Linneaandakela3 жыл бұрын
Haha it was definitely so cold!
@NYR144773 жыл бұрын
Love it a 13:20. I’m sorry but I love the puppy. So white and clean. Beautiful 🤩
@tinatravels8153 жыл бұрын
Great build well done! Just one thing - your exhaust needs to point out of the vehicle so the fumes don't build up under your van, also the muffler needs to be mounted vertically as there is a drainage hole on the bottom for water building up (the way you mounted it it will start rusting) hope this helps!!
@sheyedlington90463 жыл бұрын
Good advise, I have made a screenshot. Safe information 🌝
@Maxime-eq1zv2 жыл бұрын
Hello, I liked your video, thanks a lot.. I have a question, My heater smells the assembly plastic again.. even after 2-3 days of running at 4hz.. don’t know what to do with it. Thanks a lot
@pfsmall3 жыл бұрын
Very good install. I learned a lot. Do you think you should protect that fuel line better has it goes through your floor? Vibration can be a real problem.
@gianttravelsbyvan96703 жыл бұрын
Next time you make a bench or seat, lower the height at the back 1/2" or an inch. It will make it much more comfortable to have it rising up to your knees when you sit (think Adirondack chair). For even more comfort, check out some furniture build videos on KZbin, and buy the inexpensive webbing that they put under the cushions and cut out the opening where you'll sit, and staple the webbing in a crosshatch pattern. Same as a couch at home, you'll appreciate the bit of "give" it adds. When planning to drill through the floor, use the metal pattern in the floor (pattern of raised "strips" and other areas they raise the metal floor for strength) to confirm the location is OK, such as "4 inches from the end of the 3rd raised strip".... You should be able to box around that pump, and insulate it inside to cut down the noise of the clicking. You also should have a grommet in that hole for the fuel line, so that vibration doesn't chance cutting through that tubing from the metal edge inside the hole but some silicone should be fine now. Home Depot has a pack of assorted size rubber grommets as I used them to protect my solar power cables coming in through the roof of the van. And I would figure out what the tubing size is and consider a better quality if others have replaced it, as a leak back there would be a fire hazard. Next time, use aluminum tape, such as used on ductwork (Harbor Freight or Home Depot) and you'll avoid that tape melting on you. It's great for a vapor barrier. With a small power system, you could wire the heater to have a switch that powers it from the vehicle battery, and that way go through startup for it on vehicle battery with the engine idling, then flip the switch to RV power system and shut off the vehicle if your batteries are ever too borderline to handle the startup cycle. Also, as smart as you are about things, do some investigating of KZbin videos on just buying 4 individual "Lifepo4 cells" to build your own Lithium battery for about 1/3 the price of an off the shelf one like a Battleborn... All you need is 4 cells and a "BMS" which simply attaches to each cell (to do balanced charging and top each 3.2v cell off fully despite how much charging is needed individually), and then has the charge power, and output power from the battery. The BMS gives you the appropriate protections such as overcharge, undercharge and cold weather prevention of charging since lithium hate very cold temps and you have to have them warm to charge them. You likely already know that a 75ah lead acid battery can only give you about 15a or so of useable power before damaging it from too low a discharge, whereas a 100ah lithium battery can deliver 80-90% of those amps, so WAY better than any lead acid and these days with lithium cells falling in price so strongly, it's the way to go. Sometimes Ebay has the cells at good prices, but a reputable seller on Alibaba can also be a source... start with KZbin DIY videos on building a battery from cells. Well done tho!
@luvnotvideos3 жыл бұрын
Pro-tip for putting the fuel line on the fittings: instead of using a hair drier, heat about a cup of water in the microwave for 2-3 minutes until it's not-quite boiling. Stick the end of the tube in the hot water for 10-30 seconds, then shove it onto your fitting. It should slide right on. If it's still stubborn, set it back in the hot water another 10-30 seconds and try again. Your install was fun to watch and gave me ideas for where I'll put mine (I have the same size van as you). But the only thing that concerns me is you have the muffler directly under the van. It should reach the outside - either front or sides. Otherwise you're trapping exhaust fumes directly under your living space, which can be dangerous (please have a CO detector)
@gi83233 жыл бұрын
nice job kid, proud of you
@nasak1111Күн бұрын
You would be my dad's absolute dream daughter 😂❤
@stevey5003 жыл бұрын
I highly highly superly duperly recommend the acoustic 60mm ducting from Propex. Vancafe carries it out of Colorado.
@billystroud75512 жыл бұрын
Sure hope you pot a grommet around the fuel line passing through the metal. Vibration will cut the line a little bit at a time. Also very proud of you. Keep trying. It’s worth it!
@rolansmith99512 жыл бұрын
Well done you good job I am also doing the same thing its extremely frustrating me you have helped me so much thanks for your video One thing I noticed is the exhaust really needs to leave the side of the wagon x
@alltiallo2 жыл бұрын
The muffler needs to be the lowest point of the exhaust and it also has a small draining hole in the bottom of the muffler that needs to be pointing downwards. Otherwise moisture will be building up in the exhaustsystem with no where to go and voila... You have new funny E-codes :) Probably someone already mentioned this but I didn't read thru all the comments. I enjoyed your honest video though. Most of the youtubers cut all issues away and make it look really easy :P
@Linneaandakela2 жыл бұрын
Thank you so much! I did end up changing the location of it because of helpful people like you. I appreciate it!
@martykong35923 жыл бұрын
Thank you for a great share and video! Love your Jedi helper :) All the best and Cheers! :)
@songkim39393 жыл бұрын
I've been thinking for quite long time that you look a lot like someone and now I figured!!!! You lowkey look alike Jenna Marbles😘 Always appreciated by your quality vids. Keep up with good works :)
@oklahoma_3 жыл бұрын
If you didn't do so where that fuel line is coming through your floor you need to make the hole a little bit bigger and put a grommet around the fuel line
@tinrat-n-teet3 жыл бұрын
Silicone gooped in there works fine
@_NicholasSmith3 жыл бұрын
Hey, great job on the install! No mistakes, only lessons learned! Just want to give you a heads up, your exhaust should be lower than the piping, otherwise it will build up moisture in the exhaust pipe and could start causing the heater to throw an error. Great video and build, keep up the great work!