Chitubox Masterclass Resin Printing How To Place Drain Hole

Chitubox Masterclass Resin Printing How To Place Drain Hole
This video is not meant to calling out somebody or anybody, it is a real case study for real test print result and example.
Slice Like a Thunder with CHITUBOX PRO v1.4.0
40% off on CHITUBOX PRO+FREE Resin, Free shipping!
* Promo code: dennys
* Yearly: 40% off+1kg resin (random, free shipping)
* Group: 40% off+2kg resin (random, free shipping)
Email CHITUBOX ([e-mail]) with your receipt, contact number and detailed address. We will mail the resin to you as soon as possible (customs duty & tax will not be covered by CHITUBOX). depends on the stock, you can try to request the resin.
kindly support my channel / dennyswang
Calibration Models
cults3d.com/en/users/krisn4li...
25% discount using my code : Dewa0310
for DM Stash figure at dmstash.com
Checkout Phrozen Website for Phrozen printer
phrozen3d.com/?aff=98
If you in Indonesia, you can buy Phrozen printer at tokopedia here :
tokopedia.link/I1hQGRPRpmb
If you are in Indonesia, you can buy NFEP at tokopedia here
www.tokopedia.com/yuishimokaw...
Chapters :
0:00 - Intro
0:15 - Identify the issue
1:18 - It can affect other models
2:26 - The solution
3:14 - Ideal drain hole
#3dprinting #phrozen #chitubox
If you interested to check my other work
Here my social media
FB : / nobodycustom
FB : / 3dmikron
IG : / dennys_wang
FB Group : / 373300934849501
Discord : / discord

[@RUFFENSTEINT]

huh... didn't even know hole placement was causing this on my prints. fantastic info!

[@jordangage3677]

This was fantastic! I've been working with resin for a few months and your videos are helping me a ton with figuring out why my prints look like crap 😂

[@troibandy2139]

Your videos are MOST informative! I enjoy listening to your videos very much! Great work!

[@Conundrummy]

This was super helpful thanks!

[@ItsAGundam]

I have this issue with solid pieces.

[@jamesdunn581]

Great info. Thank you.

[@matineyang]

Dennys you're always coming out with great content. Thank you sir.

[@wangdennys]

thank you

[@gregeezy]

Great video. Addresses and explains the issue right away and clearly explains the problems and solutions. The best part: It's not 15 minutes long with only 3 minutes of useful footage!

[@wangdennys]

Huahahahahahha i need to try the 15 minutes long with only 3 minutes useful footage

[@allanlarsen3261]

Informative and to the point. As always. Keep up the good work.

[@wangdennys]

Thank you

[@retromodernart4426]

Your videos are some of the best, they just keep getting better, too, thanks again!

[@wangdennys]

Thank you

[@brenolabs_]

Good tips. Thx a lot

[@evolutionxstudios]

Love your videos! So informative!

[@wangdennys]

Thank you

[@wieslawffw]

Dannys great, simple and very useful. Thanks man.

[@wangdennys]

Welcome

[@motasmagic]

Thanks Dennys, much appreciated :)

[@SergeCruso]

This was amazing! I have been printing for 2 years and I thought more holes= success! But it is all about the inital layers!

[@wangdennys]

Really what my thumbnail image capture right.

[@P1x3lMagic]

That's what call High quality content 👍👍

[@wangdennys]

Sankyu

[@CurtReinert]

Legend. Thank you for this iformation.

[@wangdennys]

Welcome

[@giriguru_gugugu]

Thank you sir for the experiments and demonstration.

[@wangdennys]

Thank you

[@Aveltro]

Really nice! I think I was lucky always placing drainholes in all areas which can not be seen and especially at the bottom. Even when there is hair on top of the figure, I place a very small drainhole as well to be sure nothing will happen in the end. Thanks again!

[@wangdennys]

Welcome

[@PureCrisp]

The universe provides!, this is exactly one of my issues right now. Many Thanks

[@wangdennys]

Let me know if it fix your issue

[@PureCrisp]

@@wangdennys Will do

[@isidoro.revenant]

Thank you very much for this video. After years of printing with the Sonic Mini 4k, designing my own models, cutting them and printing them, I think the most difficult model I have faced that I never get is a SQUIRTLE. I don't know how to place it anymore and where to drill, it's a nightmare XD.

[@vidsurfer0725]

My drain hole is fine, except for after tacos.

[@wangdennys]

LOL... Weakling 🤣🤣🤣

[@no.1_2u32]

Dennys, I swear, if I ever met you in person I would freaking hug you bro! 😎 Thank you

[@wangdennys]

Sorry, only girl allow to hug me. LOL

[@no.1_2u32]

@@wangdennys BASED 😂

[@tek9058]

you can try lychee slicer suction cup feature, it can display issues visually

[@wangdennys]

Op uses lychee, but somehow he miss the notification.

[@ddana2390]

Thank you for the good video. I'm using Mighty 8K. Can you share the anti-aliasing option that you are using in Chitubox?

[@bluegoatgarage]

Im new to resin printing and the main thing for me is remembering that everything is upside-down. Drain holes are actually vent holes until post processing.

[@arturopriegohardt9623]

My problem is that once I make the drain holes and then I'm going to put the supports, chitubox fills all that space with supports and the drain hole almost ceases to exist and a strong suction begins A perfect explanation of how they work!

[@wangdennys]

That is why never fully rely on auto support. Some final editing is needed

[@arturopriegohardt9623]

@@wangdennys will try it, thanks for the answer!🤩

[@oem42]

i always have to stare at it for 5 mins before i can remember which direction holes should be because its upside-down in chitu

[@wangdennys]

Glory hole

[@oem42]

@@wangdennys hallelujah

[@luisbustamante5479]

so let's say you have good draining holes as you explain and you still get those lines, then it is a lifting speed problem?

[@ManAtPlay]

Hi! Thnx for the helpfull info! Like always! I have a questions about your support. Why u didnt add them to the chin area? how to know that its should not be there?

[@wangdennys]

The angle So the chin is not an island.

[@ManAtPlay]

@@wangdennysoh I got it, it’s less than 45 degrees Thnx

[@suharsh96]

whats the least diameter can i do ? can i do 0.2 mm for the hole?

[@mhumienny]

What is the best wall thickness? I've added drain holes and looking at this video they seem correct. But still at some point the model has issues pilling from the film, I thought this might be due to too thick walls. I've put very strong supports at the bottom (in my opinion) so they should hold the model. I don't think that increasing the height of the retraction will help, or could it help?

[@wangdennys]

My wall thickness usually aroung 1.2mm-2mm

[@brib9716]

Shouldn't they be called something like suction alleviation holes rather than drain holes?

[@wangdennys]

Touche! Because at the end it is also to drain the resin trapped inside and flushing. So somehow it is more popular to be call drain hole.

[@brib9716]

@@wangdennys But the main issue in the video is lines from suction. Anyway, keep up the great work.

[@wangdennys]

@@brib9716 yes it is, because of the wrong hole placement.

[@GALITSAADIK]

so where did you place the top drain hole? in the hair?

[@wangdennys]

Nope No top drain hole I always avoid placing drain hole on details.