Rad Rover Accessories -- in depth info with product links

[@darkknight7169]

Just ordered my Bafung 750 from Electro bike world..Told them in the order I heard about them from Citizen Cycle about 2 weeks and I should have it and will install asap. Been using the Bolton upgraded controller while I am waiting for the real 750 to arrive and it makes a hell of a difference. My Rad is no longer a Rad its a Tank Beast have customized the heck out of it.. Bluetooth Bose Speaker System, Amber Front Running Lights/ Red/Blue Flashing light below tail light.. Last additions will be a 52 jump in battery, and Hydraulic Calipers . s always Thanks to Citizen Cycle for making all these awesome videos Please keep them coming !!!

[@Imdor]

The only thing I can really suggest is a proper suspension seatpost, adding a Suntour is the best thing I ever did to the bike.

[@darkknight7169]

I'm new to E Bikes and just assembled my first Rad Rover 5 and I diffently don't know crap about e bikes. But after beinge watching videos I bought the brain upgrade from that site. You make it easy enough to understand that even my dumb ass can beef that Rad up. Thank you I'm a subscriber for sure

[@mark3010]

I got two of the same headlights side by side on my extension bar, when I’m out at night I have them both flashing, cars can see me for miles👍 I’m all about the safety of being seen, I also got the plug and play hydraulic brakes from Bolton E bikes, let’s face it these bikes are heavy motorcycles, slow but motorcycles none the less, hydraulic stopping power is a must, though I have to admit stock brakes are very good too , stocks already saved my life when a car cut in front of me and stopped, and I went sliding in on a wing and fast prayer. I only got the Bolton brakes cause I’m a old 65 year old retired upgrade nut, and I like adding to my beloved 2019 RadRover.

[@flojotube]

Mark M. Akers - you “slid in on a wing & a fast prayer”!!!??????? HAHAHAHAHHAHA I JUST SHOT MY ENERGY DRINK THRU MY NOSTRILS!!!!! Ain’t no humor like “65+ year old retired man” humor, that’s for sure!!! It’s why I miss my dad so much.. The one-liners that come only with wisdom are one of life’s most precious, endangered commodities. God bless ya man! Never stop living life!! ✌🏻

[@mark3010]

FLOJOtube 👍😀 I’ve had that happen a few times when I was a teen and had motorcycles, Praise the good Lord he saved me then and again He saved me on my Rad👍👍👍 everytime I was going to fast and a car turned into me. Always ride like your a total ghost to cars..👻👻👻👻

[@jrperes2021]

Great video! You are such a treasure trove of Rad Rover information! Thank you!

[@MR_R.o.b.o.t.o]

Nice....you made a cop bike. Lol. Really cool. I got the Himiway. Just have to wait 6 weeks. And every minute really hurts a lot. I may go CRAY CRAY waiting forever. Can't wait to RIDE!!!!!!! Haven't been on a bike in 15 years. Hahaha, so it should be a shocking upgrade to a reg. mountain bike with no motor. Love the wheels how wide too!!! Seriously, EVERYONE HAS TO BUY ONE!!!

[@dre4759]

Pee wee herman would be jealous, the bike has everything. Get a rear seat and mini bike pegs for the rear, did it to my wifes ebike. My kids love it.

[@CitizenCycle925]

bahahaha, i just laughed out loud. pee wee's big adventure was my fav movie as a kid.

[@stevemccormack9948]

Man those wheel lights are wild. You're like the electric horseman.

[@MrSavedbyzero]

Thanks for all the information you provide. Just wanted to say that Cascade Manufacturing also makes the front bracket bottle holder and it’s a little cheaper: $16.50-21.00 depending on the color. Mine was shipped within 2 days and I got it in about 5 days.

[@danl6961]

Cool mods. I think the rear wheel lighting is better than the front setup. I like your vids so keep at it.😁🤙🚲

[@MindScienceAlchemy]

My Rover should arrive in July (the waiting is the hardest part) I watch your videos to learn from your experience and these accessories are a great heads up. Thank you for sharing

[@CitizenCycle925]

glad you enjoy the videos, it seems a lot of ebikes are backordered currently, not sure if its a big rush to buy them, or problems getting stuff out of china. you'll have it for most of the summer though. i have never regretted buying my Rover.

[@MindScienceAlchemy]

@@CitizenCycle925 your enthusiasm is contagious. A suggestion: what tools would make a good tool kit for the bike - size of spoke wrench? What kind of torc wrenches would work for assembly etc

[@mr.a9647]

@@MindScienceAlchemy My should be arriving sometime this month (JUNE). I am checking my email every single day for a tracking number hahahah. Can't wait!

[@MindScienceAlchemy]

@@mr.a9647 please let us know when your bike arrives so we can know that Rad is receiving shipments. I Googled Rads Seattle location and it stated "temporary closed" not sure if Covid or protesters are affecting the business? Hey Raul - "the waiting is the hardest part" but hopefully the wait won't be for much longer.

[@olewornhat]

@MindScienceAlchemy Same, supposed to be here sometime in July.

[@rickyn1135]

Thank you for taking the time Citizen.

[@larrywhite6298]

The Roam holder is excellent I have one on my trike. !

[@bikeragopro4570]

Good video, great info. I just did a test to see how far I could ride on throttle only.

[@MadfugginMax]

the ammo box idea was good man i like em,gonna copy that up thx for that

[@billlander3700]

Me too

[@joejohndrow2061]

Great videos! Learned a lot from them. Your Apr. 2020 vid with product links doesn't show the mounting box for the 35a controller. Can u refer me. Thanks.

[@loriwaters9233]

Hi! I want a seat cover for my RadRover mini. Do you have any suggestions? Don’t really want to replace the seat. Thanks!

[@stevenorsinelli4029]

Great Video, you make me wanna go for a ride!

[@lisat9707]

I had that kind of phone holder... my phone is a bit big like allot are now and that rubber thing wont stretch safely. GUB pro 3 holds my pixel 6 with otterbox defender case super securely. You cannot remove it without loosening the screws that hold it in place.

[@rh416]

Thanks for posting this. Very informative. Love my Rover.

[@viper8234]

I bought the bikeroo seat but I cant figure out how to mount that on the post. I'm in Raleigh would love to connect and find out how you did yours !! Thx bro

[@seriouskite]

I either slightly squeezed in the rails or back out using the pliers in the opposite tools intention. Hope that helps.

[@timwebb2129]

Cool video, very helpful.

[@Stoners_org-l1z]

Got my bike about 2 weeks ago. Love your videos. Ordered the mirrors you mentioned but after removing the grip ends, there isnt anything for the mirrors to screw in to. Am I missing something? Gracias senor

[@gunther1955]

I like the original rad fenders that had the retro look. But then, I am an old man..... No longer pushing 65, now Im pulling. Got the aeropex bone conduction headphones cuz hate stuff in my ears and I can still hear what's going on around me when I'm cruising the foothills of Maine between brewpubs mumbling to myself or jamming to some Little Feat

[@CitizenCycle925]

hahaha, whats the legal limit while operating an ebike... :)

[@dadathome274]

I know your bike is out of warranty but if it was still under warranty, would the Bolton kit void the warranty ?

[@PhotoStrider]

Listening to Bolton Bikes video on the controller upgrade, I had the impression you would void the warranty....you could always contact Rad Power bikes to confirm it. Ride Rad 😀

[@josetrevino364]

The company at Rad rover says yes.

[@josetrevino364]

Yes you would lose your warranty.

[@vanbalam8840]

After upgrading the controller have you noticed if the stock motor heated up more than normal ?

[@CitizenCycle925]

I did not notice the stock motor heating up at all and I ended up taking the stock motor out and swapping in a true 750 motor shortly after the controller upgrade anyway

[@vanbalam8840]

@@CitizenCycle925 thanks for the quick response. I planned on upgrading the motor as well !

[@Tony-ij9zx]

Thank you for the work you put into your videos. There really very informative. This could be my first electric bike purchase but I’m really looking hard at the rad rover. Getting up in age and recently sold my MC so the itch to ride is back. Comfort is a key for me and your seat looks like a soft ride. I may have missed it what could you comment on your handlebar. I really like how they ride back sorta like my old MC. appreciate all the feedback and I’m sure all riders out there appreciate your time in doing so. E well.

[@milan99224201]

Do you have a suggestion on bike locks? Cafe locks fit the fat tire? Will the kryptonite gravity wheel locks work with this bike?

[@Tardisius]

I added Welgo MG3 Magnesium pedals + pedal extensions. A Thumb Throttle. A RavX Cruiser Deluxe saddle (14x14) Video: Rad Rover Power Bike ..1 Year Old. =)

[@fosterechalimbana2160]

doing a good job & like this

[@jayhernandez6812]

Hi, do you any of this to protect your radrover 5 / gps protection, lock, insurance, also electric air pump, if you do please let me know thanks.

[@CitizenCycle925]

I have a simple bike lock, I pretty much never let it out of my sight, no insurance on it. And I carry a hand pump, old fashioned 😁

[@paulroot6384]

Love the bar end mirrors. Could not find on amazon! Help!

[@CitizenCycle925]

Link in the description

[@MarkFisch]

Awesome I watched a all ur ebike videos I ordered mine today but doesn’t come in till June

[@jennifers9884]

The Fisch Family Adventure i am waiting for mine too. Super excited. Hope you enjoy it.

[@Superbuic]

Hi there! I too have to wait until June for my Rad Rover 5 to ship out. Good news is I got an email saying it was shipped out today 6.3.20!

[@Celestialrob]

I’m waiting till July as I only ordered a few days ago - good luck, do report back!

[@johnlei9821]

Any tips on how to put those spoke liner onto the spoke? They are really tight and then hard to finish putting it on when two spokes cross path within the wheel.

[@CitizenCycle925]

best method i found was to put each end of the spoke cover on and work your way towards the middle where the spokes cross. then with one hand apply some pressure to the spokes to separate them a little and with the other hand roll or rotate the spoke skin, it should slip on fully then. its a little tricky.

[@johnlei9821]

@@CitizenCycle925 Thanks for the tip. Loves your channel. How long did it take to do both wheels. There are 36 spokes per wheel and it was very difficult to apply. I guess I have to learn to be patient. :)

[@deirdrereynolds4684]

you seem like a nice guy; your fiancé has a great personality too! ☺️

[@CitizenCycle925]

Thank you for the kind words Deirdre!!!

[@richierich1888]

My first nighttime riding experience with my rad5. As noted by everyone, the stock light is dismal. So, I purchased the victagen headlight, 5000 lumens. It comes with a USB to C charger. Does anyone know if there is a plug and play connector that I can get to fit the existing connector? I don’t know what the name of that connector is either.

[@ericolson3028]

Trying to get the spoke skins on my bike. The spokes are really tight and even with a lot of pressure won’t separate enough to fit a spike skin between them. Any suggestions?

[@CitizenCycle925]

Best method I found was to work each end towards the point where the spokes cross. Then use one hand to push the spokes apart a little bit while rotating the skin with the other hand.

[@jaredjc5978]

I need your advise, I purchased the spoke skins and I'm having a hard time getting them on, can you suggest an easy way to install them? Thanks.

[@CitizenCycle925]

they are a pain, i work from each end towards the middle where spokes cross, then using 1 hand push the spokes apart a little and with the other hand spin the skin.

[@jaredjc5978]

@@CitizenCycle925 Ok thank you for the advice, I'll try that. :)

[@DemonikCustoms]

You think I could upgrade the handle bars to something bigger...I was looking at a BMX style with 8 inch rise

[@brianfreeman2569]

Great video. Thanks... and ya, I’m 56👍

[@danieleckes392]

Awesome

[@cantgetriteon193]

That's dope

[@kevinlavin1944]

Just a heads up sometimes too many lights make people look and when people drive and look they tend to steer them towards what there looking at. Be safe and enjoy

[@flojotube]

Kevin Lavin - I actually attended a class on this when I was still a cop... There have been MANY studies on this topic due to the unbelievable amount of ROADSIDE DEATHS caused by vehicles suddenly veering off the road & crashing into tow trucks, police cars, ambulances, etc (Vehs w/ TONS of safety/warning lights for MAX visibility)... It’s been scientifically proven that INTOXICATED DRIVERS are the issue... They tend to stare at the bright blinking lights for some reason and unconsciously steer toward them as they approach... Many believe it’s just the “looky-loo” syndrome with a healthy splash alcohol abuse mixed in that causes this, others believe it’s the drunk driver’s guilt or concern that the flashing lights ahead will result in his/her apprehension... Either way, there was NOTHING found to solidify the claim that average sober drivers (with no mental/physical impairments) will veer toward these same roadside lights. In fact, these same studies showed that it was THE OPPOSITE and that sober drivers will NOT typically have this reaction. The only ATYPICAL hazard found w sober driver would be them attempting to switch over to the left lane to avoid passing too closely to the lights without properly confirming there’s room to causing nearby vehicle flow to be interrupted. This study was done when considering whether or not the universal UPGRADE TO LED EMERGENCY LIGHTING as the highway minimum standard was better or worse for traffic safety... The verdict??? Obviously the LED lights won. THE BRIGHTER THE BETTER, THE MORE THE MERRIER. Drunk drivers are not supposed to be on the roadway. You can’t plan your life around rare possibilities while ignoring the majority of “normalcy.” Reducing bike lighting in preparation of the 1 drunk out of 2,000 passing vehicles is like hiding your money in your rectum instead of your pocket in case that 1 expert pick pocket happens to target you that day. The one and only thing to adjust for bike lighting at night is the front beam level. Just like an automobile, the light beam must never point higher than oncoming vehicle’s bumper to avoid blinding or disorienting the driver. Aside from that, BRIGHTER AND MORE IS 100% BEST according to the NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION as well as the AMERICAN ASSOCIATION of STATE TROOPERS and many other government groups. I just wanted to clarify this to you and anyone else who would believe such ill-informed “overbearing mommy” advice and risk their life thinking you (or anyone claiming what you are) is actually right. Ever think that maybe grown adults don’t need the advice of other grown adults when they’re not ASKING for it? I don’t get why feedback like this happens when someone who CLEARLY KNOWS WHAT HE IS DOING is taking the time to educate others. There’s always that 1 grandma who’s there to “worry” for everyone else or who “knows better” but actually doesn’t at all. And if you’re not an overbearing grandma, maybe it’s time to think about how often you put your 2 cents worth into conversations like this and consider letting adults live without inheriting an extra parent they didn’t want or need? I believe they call this “snowflake” behavior these days.

[@starwoodstudios1]

Question: I have a 1000 Ecotric Hammer, 48 Volt, I want to use a 52 volt battery with. Is there any reason why the 48 volt controller would be damaged by this?

[@CitizenCycle925]

this is out of my knowledge range, but i would think you have to stick to what is listed on the controller.

[@PeterPedroA.Cintron-421Pc]

What size battery do you have on your bike how many volts

[@asoka2000]

Where do you buy these tube lights?

[@Celestialrob]

Thanks this was wonderful. Really great guide. I think in another video you mentioned that the Bolton controller voids the warranty on the bike. Is this correct ?

[@michaelnotaro2838]

Where can I buy a front fork mount for my 2020 Rad Rover?

[@buenermarahas4532]

Do you think the thule yepp maxi child seat be compatible to this bike? or any other child seat? I like to have this bike but I want to ride with my kid too.

[@rogerkelly1145]

if you have the rad style rack it fit all rad bikes i have a rad mini step thru kids seat is a must if you have kids my 18 month niece and 3 year old really enjoy it

[@dexsj77]

Try putting a space in between each letter for the program

[@JeffManseau]

Did the spoke skins help with the rattling?

[@MR_R.o.b.o.t.o]

I REALLY think you have gone bolt on crazy....i get it though.....lots of good stuff to make somehow cooler? The bike is already solid even with 0 stuff done. Stock this bike is INSANE!!

[@vintagemxer9165]

Will that $200 motor upgrade work on the Rad Mini too?

[@CitizenCycle925]

I don't think so, check out Bolton ebikes website

[@1gr8oil]

What do you have to do to get the mirrors to fit on the Radrover?

[@CitizenCycle925]

pop the plastic plug out of the handlebars, insert mirror, tighten allen head bolt, done

[@1gr8oil]

@@CitizenCycle925 Thanks for the reply!

[@christophermyers1074]

What height water bottles do you recommend?

[@rogerf3622]

Good overview! Now if you change the light color to red on the back tire, install the same lights and color on the front tire, you’d look like Ghost Rider!

[@CitizenCycle925]

hahaha, great movie, but i thought ghost riders tires were engulfed in flames...

[@MyDailyPerspective]

Good walk through...

[@CitizenCycle925]

thank you, needed a one stop video to go over all that stuff people ask about.

[@PF_ROB]

Great video. Is the Bolton screen removable and/or waterproof?

[@CitizenCycle925]

Not removable, and I would guess not waterproof.

[@PF_ROB]

@@CitizenCycle925 I appreciate the ultra fast reply. 👊 I'm looking to buy an ebike this month or next and I've just begun my homework.

[@zinknot]

What about the front wheel motor?

[@CitizenCycle925]

Ebikeling kit

[@grh7399]

How do I know when they go on Sale (Rad Rovers) and where can I purchase one?

[@RoyalGentoo]

The Rad Rover is a specific model of ebike from www.radpowerbikes.com/ You can purchase them online and they ship them to you for no extra cost if you are located in one of the contiguous 48 states. They have a store in Seattle, Washington, but do most of their business online. You can get on their email list from their website.

[@mpwasz1]

Old man renders! Lol. I think the same way!!

[@3113jp]

seems similar to the Himiway Cruiser ebike

[@jayhernandez6812]

Where can you buy another seat in the back for another person for this rad rover 5 ?

[@CitizenCycle925]

i have never seen a Radrover with a seat on the back not sure anyone makes that.

[@dennyryan2233]

Who you callin’ an old man, Willis? 🧟‍♂️. Just kidding. I am old getting my Rad Rover in August. Checking out accessories while I wait.

[@CitizenCycle925]

Lot of folks waiting right now, hope you get it sooner than later 🙂

[@airpeewee]

ok maybe i missed it but how you get the spokes white?

[@CitizenCycle925]

Spoke skins

[@josetrevino364]

The head light holder

[@billlander3700]

I didn't hear your total cost of revesion.

[@kengauhl6636]

Do you deliver to the UK?

[@lishiapugh8451]

I need help unlocking my bike speed

[@PeterPedroA.Cintron-421Pc]

I have a ROD ROVER 5

[@LetArtsLive]

I don't care what it looks like I want a functional fenders I'm young in my brain

[@paddysweetman8063]

Assemble planner bag

[@theknightofdoom260]

Im going add a box of tacks and oil maybe some spear heads on the wheels.

[@theknightofdoom260]

Those ammo boxes one with oil one with tacks whacky races

[@MindScienceAlchemy]

The Amazon phone mount link is no longer good. Can someone point me in the right direction? Thank you

[@1nkman]

Wait until you need your wheel trued, your gonna have to take those spoke skins off!

[@CitizenCycle925]

I've already taken them off and put some back on, not a big deal

[@DanielLopes-jt8yl]

Rad is an old mans bike! I think that is intentional. That they target that group of let’s not say old men but “mature buyers”. The youngsters are a fickle game! I wish that Rad would develop a bike in their line up that targets the younger hipster set. A lot of where your going is for that relevant contemporary look. Whoa! Just saw the demo on the head light what a difference! Well any way hope Rad kicks the “old men” out of there design department (just keep the ones with experience on quality). Quality definitely being Rads strong point.

[@mark3010]

I’m 65 , lots of guys older then me on Rads, we have more aches and pains, these bikes help us to feel like kids again.👍👲🏼

[@walterg.229]

Hipsters are all about look. Which changes hourly. Follow the crowd or die. “Look, I’m a cool, individual “. Sure you are.

[@archery8131970]

What size is the bars for mirrors

[@michaelnowak3972]

Where did you get your fenders and are you satisfied with them?

[@wesslee9060]

Hey brother can you tell me the length of the spoke on this 500w bike for the 26" wheels??? Also check out my diy Electric trike on my channel

[@builderguy7305]

4

[@davidkufner4277]

Get you some ape hanger handlebars so you can add more crap! Bike needs a big watch and a dog chain...maybe a gun holster..back rest and some foot pegs out front... dont forget a flag...should be well over 100 pounds then...

[@blankyblank4742]

$34.99 for a bottle holder bracket? Time for the 3D printer.

[@CitizenCycle925]

yes, price was steep

[@jayhernandez6812]

You never answer my questions, please reply to my questions.

[@larrywhite6298]

An "old man" bike?!@#