Best Foam Cannon Yet? | Bear Force | Stainless Steel | Foam & Wash Tips

  Рет қаралды 25,308

Cars With Keav

Cars With Keav

Күн бұрын

Пікірлер: 118
@Jon77777
@Jon77777 9 ай бұрын
Just bought this from Ali Express for £12 delivered to England! Can’t wait . I did not want to spend £40 - £50 for one in the U.K. so to China I went
@CarsWithKeav
@CarsWithKeav 9 ай бұрын
As long as you got a great foam cannon to make washing fun doesn’t matter where it comes from. Hope you enjoy it!
@altillman1448
@altillman1448 8 ай бұрын
Guaranteed everyone experiences the foam cannon upper portion of the clear adjuster knob and lower screw on clear cap cracking like all the other clear plastic upper/lower models on the market. Something about the clear plastic uppers formulation for parts that come in contact with the metal upper screw or lower fitting piece cause it to become brittle after repeated use. I've had 3 different versions i.e. Raincovo, Bear Force, and Power Town. Ended up frankensteining these specific upper parts from other cheap models that were not translucent and have no further issue. All of the ones I purchased function and work just as good as an $80+ foam cannon using an electric Active VE52 pressure washer.
@CarsWithKeav
@CarsWithKeav 8 ай бұрын
Fore sure these are not as durable. That's why I usually still pick the more expensive ones of high quality. If you were to add up all the cheap ones would it end up being the same as one that last a long time? I know many mobile detailers still using the same pf22.2 foam cannon form 5 years ago or the same MJJC Pro V2 from 3 years ago. I am going to try and gather all my foam cannons and do some drop testing on the bottles and caps to see what happens. I had a Tucool one I just did a review on and the nozzle shattered from being dropped from 6 feet and it wasn't clear. Thanks for the great info as well.
@MagicMikesDetailing
@MagicMikesDetailing 8 ай бұрын
Love to see a review of the NIXX foam cannon as well. Also on my wishlist
@CarsWithKeav
@CarsWithKeav 8 ай бұрын
I’ve looked at it, but have not purchase as the manifold looks to be the same as the chemical guys and essential washer and they don’t normally foam well.
@victoryensured7137
@victoryensured7137 27 күн бұрын
Keav i got it for 10$ (with shipping) , just waiting for delivery, hope it will be dope,! Never had a foam cannon like this, i used my sh...ty Karsher one (its more like soap dispenser than a cannon of any kind...) I could buy a MTM but man it;s expensive (can't justify the price) and MJJC is not avalible here. Dude i praise you for these tests, my setup ie becoming waaay more comfortable and easy to use thanks to you, and doesn't destroy my budget 😎 I also bought per your recommendation IK Foam pro 2+ and attached a portable pumper, man the foam is nice (cleaning wheels with it) and damn you IK for coming with a electric one right after i bought mine...
@CarsWithKeav
@CarsWithKeav 27 күн бұрын
@@victoryensured7137 That is awesome sounds like your setup is getting dialed in and you are saving money here and there as well. The right setup just makes washing a breeze and more fun.
@victoryensured7137
@victoryensured7137 27 күн бұрын
@@CarsWithKeavJust.. thank you Keav! You are the man!
@MagicMikesDetailing
@MagicMikesDetailing 8 ай бұрын
This is on my Amazon list at the moment, prior to this video.
@CarsWithKeav
@CarsWithKeav 8 ай бұрын
It is a great foam cannon. There is a brass version as well that’s less than $30
@rolandm9750
@rolandm9750 7 ай бұрын
There's also a brass version of this that sells for a bit less than the stainless--even better deal if you don't care about it being brass. The quick-connect part is also still stainless, just the rest is brass.
@CarsWithKeav
@CarsWithKeav 7 ай бұрын
Correct, I suggest it in my cheap wash setup video. Brass all day if you want the full value. Not like the brass won’t last longer than the cheap plastic anyways. Fair warning a good drop and that plastic explodes.
@JimmyGunXD556
@JimmyGunXD556 6 ай бұрын
I love the bloopers!! 😅
@CarsWithKeav
@CarsWithKeav 6 ай бұрын
They come real easy to me. 🤣
@מדינט
@מדינט 7 ай бұрын
Think that most people have no idea about orifice size or check the Amps, that is why people should just buy quality foam cannon.
@CarsWithKeav
@CarsWithKeav 6 ай бұрын
I agree, but you know most people they want the cheaper deal. The quality ones the orifice sizes are usually very accurate. The cheaper ones it’s all over the place.
@santiagorojas9128
@santiagorojas9128 4 ай бұрын
Thanks for the video I’m trying to get a good cannon nothing fancy I’m just starting detailing and I’m just still using what it came on the washer
@CarsWithKeav
@CarsWithKeav 4 ай бұрын
They make a brass version of this one as well that’s only $28
@santiagorojas9128
@santiagorojas9128 4 ай бұрын
@@CarsWithKeavdo you have the link so I can look at it or a video if you made one thanks
@CarsWithKeav
@CarsWithKeav 4 ай бұрын
@@santiagorojas9128 This one amzn.to/45jAmfK You will never use one of these enough to wear out the brass. Stainless is just nice to have and look at.
@santiagorojas9128
@santiagorojas9128 4 ай бұрын
@@CarsWithKeav thank you I’m watching your videos and they are so good ima get the gun too I’m trying to upgrade but I don’t wanna spend a lot of money you’re videos are awesome thank you boss
@CarsWithKeav
@CarsWithKeav 4 ай бұрын
@@santiagorojas9128 Appreciate the kind words!
@Embrxceyourdemons
@Embrxceyourdemons Жыл бұрын
This is cool for the price! Ive been wanting to get a second canon just for my pre wash solution! This will be the solution!
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Awesome!
@BryanRushing
@BryanRushing 14 күн бұрын
So educate me a little in the amp reading and concern…please 😀 And what are you using to get your reading?
@CarsWithKeav
@CarsWithKeav 14 күн бұрын
Most outlets are rated for 15amp and most pressure washer motors are rated for that. If you decrease the orifice on the foam cannon it makes the motor work harder which increases amps. You don’t want to push the machine behind it’s rating as it could damage it and also trip the breaker. I use this to measure amps amzn.to/3BUjDVH
@ThisOldDetailingDude
@ThisOldDetailingDude Жыл бұрын
Great review! I will be buying this new foam cannon. Another awesome review! Thank you
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Hopefully their delivery times get better.
@DAT-TEXAS-DUDE
@DAT-TEXAS-DUDE 5 ай бұрын
​@@CarsWithKeav I just ordered this on the 12th of May and it's arriving on 14th . Anyhow is the hose barb on this bear force ¼"? Thanks in advance
@Enthusiast_detailing
@Enthusiast_detailing Жыл бұрын
I use a sooprinse but I’m jealous of that weighted ball
@CarsWithKeav
@CarsWithKeav Жыл бұрын
20% off on Prime Day right now. amzn.to/3PPnK8X
@thomasmoine2998
@thomasmoine2998 7 ай бұрын
Hello ! First of all, thank you for your video ! I had a question for you : which one is the best between the stainless steel one or the brass one ? What's the difference ? Because i can have the brass one for 15$ on aliexpress while the stainless steel one cost about 30 ! What do you think ?
@CarsWithKeav
@CarsWithKeav 7 ай бұрын
Stainless steel is just a better quality material and great for anti-corrosion. There is no difference in performance it’s just looks and more expensive materials. If price is the main factor then I say get the brass one. Not too many people will ever use one long enough to see the benefits of stainless over brass. It’s just one of those nice things to have.
@thomasmoine2998
@thomasmoine2998 7 ай бұрын
Okay ! Thanks a lot for you answer :)
@sandoutlaw85
@sandoutlaw85 2 ай бұрын
The bear force is a good foam cannon get really good thick foam with my active 2.0 with a 1.25 orfice and some adams mega foam only thing i was gonna use it the other day and the top screw cap when i was screwing back to the bottle cracked so now i cant use it 😔 think its the clear see threw plastic just doesn't last as long as black plastic so i might just get me a mjjc v2.0
@CarsWithKeav
@CarsWithKeav 2 ай бұрын
That sucks for sure MJJC is built to last the plastic is very durable.
@sandyshine6690
@sandyshine6690 Жыл бұрын
Snow foam is great stuff i use autoglym polar blast at the moment but have used a few different brands sum are better than other's great channel 👍🇬🇧🇺🇸💎
@MrChillidee
@MrChillidee Жыл бұрын
Built Hamber Auto Foam is by far the best snow foam for actually cleaning your car... Knocks socks off auto glym which I've also used....
@sandyshine6690
@sandyshine6690 Жыл бұрын
@@MrChillidee thankyou i will get sum and try it out its very good stuff and has great reviews 👍🇬🇧
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Wish we could get in the states without it being really expensive. We are starting to get some Bilt Hamber through Clean Garage, but mainly the APC and Atom-lock.
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Yes, several good ones out there that are better at cleaning with higher Alkalinity. Incredible suds is one of those and really good surfactants. It’s not Bilt Hamber level, but better than the PH neutral soaps that are just for lubrication.
@jetdoc87
@jetdoc87 3 ай бұрын
I had the Bear Force and unfortunately had to return it because after using it twice I couldn’t open the lid when empty. Guess the vacuum was way too much and was afraid of breaking it down the road. Is this normal with wide mouth cannons?? Have always used narrow mouth bottles. Great Video.
@CarsWithKeav
@CarsWithKeav 3 ай бұрын
Most foam cannons will tighten up a bit after use depending on the pressure washer, the fluid in the container and water temperature. I have had some I had to really work to get off. No specific one just sporadic so I would say it’s a normal thing for wide necks.
@bzd16b
@bzd16b 25 күн бұрын
Can't be the negative pressure, the lid has a tiny hole for air to go in and out
@CarsWithKeav
@CarsWithKeav 25 күн бұрын
@@bzd16b Yeah, they have a breather thats why it leaks. I think its is temperature differences in the water and plastic to the heat outside or even just the movement of the spray gun while the bottle is heavy. Plus chemical solution could be in the threads a dries up there as well.
@Mukapah
@Mukapah Жыл бұрын
😂 love the bloopers 😂
@CarsWithKeav
@CarsWithKeav Жыл бұрын
I lost it several times. 🤣
@gregory3227
@gregory3227 Жыл бұрын
Definitely want to see a review on that pressure washer!
@CarsWithKeav
@CarsWithKeav Жыл бұрын
It’s on the list. Thx for the feedback.
@jeremytelman6897
@jeremytelman6897 9 ай бұрын
What’s the name of that pressure washer? I need a new one and I wanted a big boi, but I want something blue to match my business colours. That seems pretty right up my alley
@CarsWithKeav
@CarsWithKeav 9 ай бұрын
@@jeremytelman6897 Its called the Foting, but it’s unavailable on Amazon and Big Boi is sold out. Main reason I have not made a video on it yet.
@FastRedPonyCar
@FastRedPonyCar Жыл бұрын
Bought! I have been using a couple of the generic cheap amazon cannons and while they work, they topple over easily, the narrow opening makes filling them a pain and there's really only one setting on them that can produce any meaningful amount of foam. Unrelated, how does that generic pressure washer compare to the Active? It's 1/3 the cost and I'm usually a "buy once - cry once" type of guy but my old big box store Greenworks GPW2001 is still kicking strong but it's huge and my garage is cramped.
@CarsWithKeav
@CarsWithKeav Жыл бұрын
It’s not better than a Greenworks. The $99 Greenworks is actually very nice, but if looking for the best value out there it’s the Active VE52. Has comparable performance to the 2.0, but $100 less. For under $600 nothing compares to an Active. It’s night and day to me.
@paul9387
@paul9387 Жыл бұрын
Keav, what's your favorite car foam soap, and what would you recommend as an afterwash for a car that has a ceramic coating put on already. I wanna try something new! Thank you!
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Incredible Suds is my favorite as a foam soap. Strong cleaning and foams with only an ounce needed in the foam cannon. After wash I assume you mean a drying aid or protectant. I use Quick Beads as it is water activated then it makes using my leaf blower way easier to dry off and leave a nice layer of graphene for water spot protection. If you are using a towel for a drying aid then Ceramic Gloss is what I use. These are all DIY Detail products and my current favorite brand. CARSWITHKEAV will save 10% on their website.
@paul9387
@paul9387 Жыл бұрын
@CarsWithKeav all purchased! I see you have lots of stuff there, will be coming back! Thx Keav! 🤜🤛
@NewVisionLCS
@NewVisionLCS 2 ай бұрын
Which orifice would you recommend in this foam cannon when using the Craftsman 1700psi pressure washer?
@CarsWithKeav
@CarsWithKeav 2 ай бұрын
1.1mm orifice would work well.
@NewVisionLCS
@NewVisionLCS 2 ай бұрын
@@CarsWithKeav got it, thank you!
@bbcamillo
@bbcamillo 10 ай бұрын
Do I need to worry about the inaccuracy of the orifice size with a 3400 psi/2.3 rpm Ryobi gas pressure washer? Should i buy a 1.35 orrifice instead?
@CarsWithKeav
@CarsWithKeav 10 ай бұрын
Just for stress on the pump with a pressure washer like that I would run 1.35 at the least. I know some run a 1.5 since it takes even more stress off the pump and helps life span.
@thewheater7365
@thewheater7365 7 күн бұрын
Is the stainless steel of brass version better?
@CarsWithKeav
@CarsWithKeav 7 күн бұрын
Stainless is a better material and is nice to have, but nobody will wear out those brass components so they both will do the exact same thing.
@thewheater7365
@thewheater7365 6 күн бұрын
@@CarsWithKeav thanks !!
@javierpagan364
@javierpagan364 11 ай бұрын
Hey Keiv! Where did you buy the tip holder for your pressure washer nozzle?
@CarsWithKeav
@CarsWithKeav 11 ай бұрын
I got them from here madcarcareproducts.com
@Carlos.Rivera
@Carlos.Rivera Жыл бұрын
Thanks for keeping it real. My Griots weight ball was crusted oxidized.
@CarsWithKeav
@CarsWithKeav Жыл бұрын
I have not used mine in forever so I left it sealed in the BOSS bottle with some water and it looks like a rusted car frame from a bad snow area. 🤣
@GstarCurtis
@GstarCurtis 7 ай бұрын
I see you have reviewed both versions (stainless steel and brass), do you feel any difference between the two? (Bear Force)
@CarsWithKeav
@CarsWithKeav 7 ай бұрын
There is no difference just the quality of the metals used.
@GstarCurtis
@GstarCurtis 7 ай бұрын
@@CarsWithKeav thanks for the reply 😊
@vito1785
@vito1785 5 ай бұрын
It's a good foam cannon and a good price. I just don't see the purpose of buying the stainless steel over the brass, unless you just want to spend more money on the looks. Yes stainless steel should last longer then brass, but the fail point on this cannon will be the plastic, which will fail long before the brass.
@CarsWithKeav
@CarsWithKeav 5 ай бұрын
You are absolutely correct the brass is the better value. Some of us just want everything to match up and we can be OCD about it. If my quick connects are stainless then I would prefer the manifold be as well especially if its just going to cost me $12. Brass is just fine I mean the MJJC only does brass and they hold up very well and the MTM is nickel plated brass.
@jetdoc87
@jetdoc87 4 ай бұрын
Just got this Bear Force for Father’s Day today and was wondering how the brass would hold up. Thank you for pointing out the obvious.
@CarsWithKeav
@CarsWithKeav 4 ай бұрын
@@jetdoc87 It will hold up longer than anybody could use it. Might have to replace the filters if you use it a lot after awhile.
@jthiel0711
@jthiel0711 7 ай бұрын
So your 1.1 came stamped? Mine did not. The 1.25 came stamped though. Hard to tell the difference, so I'm not sure if I actually got the 1.1 with mine or not lol
@CarsWithKeav
@CarsWithKeav 7 ай бұрын
Biggest problem is even stamped I have found the orifice size to not be accurate to the stamp. No consistency in their accuracy either sometimes bigger and other times smaller than stated.
@amoni1959
@amoni1959 6 ай бұрын
Yeah my griots FC ball rusted out. I was shocked. 😢
@CarsWithKeav
@CarsWithKeav 6 ай бұрын
Wonder if they are still replacing those for free. I heard many reaching out to customer service and getting a replacement.
@MarcYanOfficial
@MarcYanOfficial 5 ай бұрын
Is there a way I can show you my foam production from the bear force?
@CarsWithKeav
@CarsWithKeav 5 ай бұрын
You can DM on Instagram or send me an email at carswithkeav@gmail.com
@TommySalami73
@TommySalami73 2 ай бұрын
were you at max foam on the nozzle at the top?
@CarsWithKeav
@CarsWithKeav 2 ай бұрын
I’m always at max foam.
@TommySalami73
@TommySalami73 2 ай бұрын
@@CarsWithKeav just checking :) I bought one also!
@mowens1972
@mowens1972 6 ай бұрын
I purchased the MJJC version 3. I have a question regarding the know you use to adjust the amount of foam. Mine just spins and never stops, I'd this normal?
@CarsWithKeav
@CarsWithKeav 6 ай бұрын
It should stop at some point as it is screwing a valve open and closed. The adjustment knob might not be fully engaged or it is stripped causing the knob to turn even though the valve itself is probably stopped.
@mowens1972
@mowens1972 6 ай бұрын
It definitely changes the amount of foam when turned. It seems like after three or four turns it would stop turning.
@CarsWithKeav
@CarsWithKeav 6 ай бұрын
@@mowens1972 it should stop for sure.
@mowens1972
@mowens1972 6 ай бұрын
Just got home and it does stop if I turn it enough. One other thing the dial has three blocks going from really short to really tall. Which direction increases the foam?
@CarsWithKeav
@CarsWithKeav 6 ай бұрын
@@mowens1972 Turning it clockwise gets you more foam.
@scotty2221
@scotty2221 2 ай бұрын
What is a good pressure washer that I can use quick connects with? I'm clueless on brands on what is good, please let me know. Anything under $300 with all the wands, quick connects needed please.
@CarsWithKeav
@CarsWithKeav 2 ай бұрын
You can use quick connects with most pressure washers. If you’re looking for a full setup for under $300 then I would stick to a Greenworks 1700 or a Ryobi 1800. Many detailers use them in their mobile setups. Cost about $100 each and buy the time you add a hose, gun, wand and quick connects plus tax you will be in the mid $200’s. Outside of that the CAT 1800 at around $250 is the next step up and way better performance. Then you got the Active 2.0 at $350 which is the best value in all of pressure washing in my opinion. You get $1k performance and it’s a very small form factor.
@scotty2221
@scotty2221 2 ай бұрын
@@CarsWithKeav Thank u very much! Wasn't sure if I have to have a 2.0gpm washer or if a Ryobi 1800 will be good enough for just my stuff at my own house.
@CarsWithKeav
@CarsWithKeav 2 ай бұрын
@@scotty2221 It is wants and needs. Anything beyond a Ryobi is a want unless running a business and efficiency and durability is key then you will need to be looking at $1k+ machines. A homeowner for sure doesn’t need 2.0gpm. I myself just want more which is a problem. 🤣🤣 You are all good with a Ryobi with a 2.5 or 3.0 nozzle you’ll have great car washing performance at between 900 and 1000 psi and between 1.35 and 1.45 gpm. If you needed more more performance for say cleaning the driveway then possibly a gas powered one is best which cheaper ones would be right around $300.
@scotty2221
@scotty2221 2 ай бұрын
@@CarsWithKeav Thank you!
@menswearhous
@menswearhous Жыл бұрын
What brand paint did you use for the garage?
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Most all of the walls are vinyl panels. I used Flexseal around the windows and behind the wash setup. Some Killz primer on top of the flexseal to have less of a glossy look and the tackiness that comes with that type of product.
@arproject6827
@arproject6827 8 ай бұрын
Bagaimana hasil penggunaan "Bear Force"? Bagus atau tidak?
@CarsWithKeav
@CarsWithKeav 8 ай бұрын
Very nice! One of the best out there right now.
@entropy11
@entropy11 7 ай бұрын
Hands down best foam cannon for the price?
@CarsWithKeav
@CarsWithKeav 7 ай бұрын
I think it is the best under $50 for sure and the brass version is under $30 and I would say is the best just from a value standpoint. Stainless isn't needed its just nice to have and is more expensive.
@davidtn227
@davidtn227 Жыл бұрын
Love the video but that hole at the top is a deal breaker. I have another foam cannon from China and it also has the same hole at the top. I’ll stick to my mjjc.
@CarsWithKeav
@CarsWithKeav Жыл бұрын
If you got an MJJC you already have the best out there. Just wait for the Pro V3 early next year. It’s going to be expensive though.
@davidtn227
@davidtn227 Жыл бұрын
How much do you think it will be? I like your mjjc s 3.0.@@CarsWithKeav
@CarsWithKeav
@CarsWithKeav Жыл бұрын
@@davidtn227 I’m thinking $109 to $119 due to it being rumored as stainless steel. Keeping the pro v2 in the lineup as the cheaper brass alternative. S V3.0 will be the middle line staying at its current price. This is just speculation though they could just drop it at $99.
@vectorr6651
@vectorr6651 6 ай бұрын
I am so confused how some of these canons differ from each other since the concept is the same on all of them.
@CarsWithKeav
@CarsWithKeav 6 ай бұрын
A lot of them are the same, but some are different. There are about 5 different types out there and they all use catalog parts from factories and put them together like legos. Most pick based on cost or looks. Others sometime just pick the right setup to produce the best foam. The more expensive ones like MtM and MJJC foam better than most of them. You got other things like the quick connect, straw, weighted ball, etc. that make things easier to use.
@DAT-TEXAS-DUDE
@DAT-TEXAS-DUDE 4 ай бұрын
​@@CarsWithKeav No one seems to have the answer ,and maybe you do or you don't . Anyhow is it okay or does it make a difference if I change out the single mesh filter from this exact bear force foam cannon and replace it with a 3 piece mesh filter system , it is a foam filter sandwiched by 2 mesh filters
@CarsWithKeav
@CarsWithKeav 4 ай бұрын
@@DAT-TEXAS-DUDE You should be able to replace no problem. The overall size is the same between the single piece and the three piece. I’ve tried with a few foam cannons, but it doesn’t change the foam much at all from what I have seen.
@Pepe-dq2ib
@Pepe-dq2ib 8 ай бұрын
Too bad they used transparent hard rigid plastic just to look fancy. Drop that a few times and itll chip or shatter.
@CarsWithKeav
@CarsWithKeav 8 ай бұрын
It’s probably cheaper in the end as well. I’m going to do a drop testing video soon put that plastic and the clear bottles to the test.
@CP-rm7rz
@CP-rm7rz Жыл бұрын
Keav, i hope you getting a cut for giving away the design.
@CarsWithKeav
@CarsWithKeav Жыл бұрын
I wish, but most likely somebody just finally picked most all the good parts from the catalog. Missed the mark on the cap leaking. All I can hope is enough links are clicked with prime day the next day. Maybe I can get some more pressure washers to review.
@andyhedin4893
@andyhedin4893 Жыл бұрын
Just an FYI, the "t" in Griot's is silent. Say gree-ohs
@CarsWithKeav
@CarsWithKeav Жыл бұрын
I will next time. Good thing for me I don’t use much of their stuff.
@cfwebdeveloper
@cfwebdeveloper Жыл бұрын
Awesome review Keav :D
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Thank You!
2 MAGIC SECRETS @denismagicshow @roman_magic
00:32
MasomkaMagic
Рет қаралды 18 МЛН
小丑揭穿坏人的阴谋 #小丑 #天使 #shorts
00:35
好人小丑
Рет қаралды 25 МЛН
Best CHEAP Pressure Washer FOAM CANNON | Harbor Freight Foam Cannon
12:10
IMJOSHV - Car Detailing and Reconditioning Tips
Рет қаралды 437 М.
Is it an MJJC Pro V2? | Swift Auto Care Foam Cannon
10:14
Cars With Keav
Рет қаралды 7 М.
Is DAWN Dish Soap the HOLY GRAIL of Detailing products ??
15:19
Detailing Dogma
Рет қаралды 655 М.
Does Griot’s Garage Really Have “The Boss” Of Foam Cannon’s!?
17:51
The Best Foam Cannon? Part 2
12:27
Tools Tested
Рет қаралды 32 М.
Best Wheel & Tire Cleaner? Let’s Find Out!
15:49
Project Farm
Рет қаралды 531 М.
New Amazon Battery Foamer | Great Foam | Review & Testing
17:48
Cars With Keav
Рет қаралды 20 М.
SECRETS They DON'T Want You To Know - Do Not Pre-Rinse Your Car
11:16
AUTO DETAILING PODCAST
Рет қаралды 684 М.
Best Coffee Maker? $20 vs $150 - Let’s Find Out!
17:13
Project Farm
Рет қаралды 522 М.
2 MAGIC SECRETS @denismagicshow @roman_magic
00:32
MasomkaMagic
Рет қаралды 18 МЛН