You don’t need to take off top , simply pull out magnet from top and debris falls to bottom, open ball valve and drain. You’ll wear out o ring on top , no need to open
@3mariusx2 жыл бұрын
Same comment i wanted to post 😂
@Cobnapint5 жыл бұрын
The whole point of the TF1 is that you remove the magnet and flush through using the taps WITHOUT having to unscrew the top which will almost certainly cause leaks down the line once you've disturbed the seal.
@butlerplumbingheatinggasfi20545 жыл бұрын
Good point. In this case, the fluid in this system is glycol, and we want to keep it in because it is expensive to replenish . The method you talk about works great for water with inhibitors.
@rogerborg5 жыл бұрын
I can absolutely confirm this to be the case. Putting any torque on the filter will cause the unions to leak, and then God help you if it's been installed in a constricted location and you can't get at them.
@splashbunny5 жыл бұрын
Hi how do fill up with cleaner or inhibitor? Thanks
@zzzzz2903 Жыл бұрын
"The whole point of the TF1 is that you remove the magnet and flush through using the taps WITHOUT having to unscrew the top " - but how? On the video, you need to remove the top to access the magnet.
@Cobnapint Жыл бұрын
@@zzzzz2903 The cylindrical magnet just pulls out the top. It's not immersed in the water, it sits in a plastic sleeve.
@crazybear213 Жыл бұрын
Cheers. Easy video explaining all tasks.
@kamasori6 жыл бұрын
Thanks so much, cleaned my filter very easily after watching you!!
@kennygoossens6 жыл бұрын
Cleaned my filter easily using this video.
@fmcsvideos28554 ай бұрын
Thanks, really helpful video 👍🏻
@andrewcarnell6013 жыл бұрын
Thank you, I've been trying to work out why no water was circulating all day - I did not know there was a bleed on the Fernox TF1
@zzzzz2903 Жыл бұрын
Great, thanks! Unfortunately mine cannot be opened while built-in (no space), so I need to remove it by those 2 big bolts next to the red handles first
@ScorchedEarth-cd5cl2 жыл бұрын
I can`t line my yellow arrow back up. It`s in the wrong place but lid is tight and no leaks
@X02switchblades6 жыл бұрын
Thanks!
@EasyToDIY4 жыл бұрын
verry good
@mickrobbobmw4 жыл бұрын
Rubbish, thats NOT how you do it!!
@ayeRIGHTyaBE4 жыл бұрын
thumbs down because of the sound quality, such a shame